I flashed Mokee rom using TWRP recovery
I got a boot loop
Now Recovery is also not working
Any solutions???????????????????
Fastboot
garavind74 said:
I flashed Mokee rom using TWRP recovery
I got a boot loop
Now Recovery is also not working
Any solutions???????????????????
Click to expand...
Click to collapse
If you did not upgrade to Lolipop, then you can try installing stock rom from Fastboot
ahuja_p said:
If you did not upgrade to Lolipop, then you can try installing stock rom from Fastboot
Click to expand...
Click to collapse
or if upgarded then also flash through fastboot the latest cm 12 images
you can also try installing recovery again through fastboot
Related
So here's my story.
My device is :
S-ON, 4.4.4 Droid stock, 3.29.161.9.
Yesterday i tried to get root while keeping stock rom for no tampered msg at bootloader.
I was following guide from http://forum.xda-developers.com/showthread.php?p=51383278&highlight=ota#post51383278
so with unlocked bootloader i tried to fastboot boot CWM recovery image.
and it hanged my phone as everyone reported for > 4.4.3 ..... so i gave up for this time.
Today i was in mood for flashing some custom rom and then rooting, but with TWRP(newest 2.8.3.0).
just for gigles i tried to fastboot boot newest twrp. only thing i did was renaming .img file to recovery.img.
guess what? it worked! so i got root, reboot and started enjoying not tampered stock
So now im sharing this lil'christmas story with you.
Of course if it's irrevelant or already found please delete this topic.
happy christmas nevertheless.!
i'm on 4.1.1 and can't install room with 4.4.4 cus it's request 3.28.401.6 firmware or above and when i do it and trying
fastboot boot recovery.img
Click to expand...
Click to collapse
i can touch the recovery screen but cant see what i'm doing.
now using TWRP 2.8.3.0 the phone just doing reset and not going to recovery
any advice?
Plomiwn said:
...
just for gigles i tried to fastboot boot newest twrp. only thing i did was renaming .img file to recovery.img.
guess what? it worked! ...
Click to expand...
Click to collapse
Oh, really...?
Merry Christmas to you.
mb0 said:
i'm on 4.1.1 and can't install room with 4.4.4 cus it's request 3.28.401.6 firmware or above and when i do it and trying i can touch the recovery screen but cant see what i'm doing.
now using TWRP 2.8.3.0 the phone just doing reset and not going to recovery
any advice?
Click to expand...
Click to collapse
Use older recovery. That one has new display drivers.
Merry Christmas to you too.
Sent from my HTC One_M8 using Tapatalk
this is what i get when upgrading the firmware http://oi58.tinypic.com/e0jxqq.jpg
was using Stock Firmware + NoRedText Hboot from here: http://forum.xda-developers.com/htc-one-m8/development/ota-3-28-401-6-t2899900
been trying the following recovery files:
openrecovery-twrp-2.7.0.1-m8 - not working, screen stuck in fastboot
openrecovery-twrp-2.8.0.0-m8 - going reset
* to be clear: this "no display" in the recovery thing happening only after i flash InsertCoin 5.0.6 http://insertcoin-roms.org/2014/12/...rol-market-ota-icon-packs-stable-performance/
(haven't flashed another room yet)
now i need do what i always do when this happen:
- fastboot oem rebootRUU
- fastboot flash zip 2.22.401.4-Firmware-noredtext
after that go back to recovery and restore the backup i made before.
mb0 said:
this is what i get when upgrading the firmware http://oi58.tinypic.com/e0jxqq.jpg
was using Stock Firmware + NoRedText Hboot from here: http://forum.xda-developers.com/htc-one-m8/development/ota-3-28-401-6-t2899900
been trying the following recovery files:
openrecovery-twrp-2.7.0.1-m8 - not working, screen stuck in fastboot
openrecovery-twrp-2.8.0.0-m8 - going reset
* to be clear: this "no display" in the recovery thing happening only after i flash InsertCoin 5.0.6 http://insertcoin-roms.org/2014/12/...rol-market-ota-icon-packs-stable-performance/
(haven't flashed another room yet)
now i need do what i always do when this happen:
- fastboot oem rebootRUU
- fastboot flash zip 2.22.401.4-Firmware-noredtext
after that go back to recovery and restore the backup i made before.
Click to expand...
Click to collapse
not sure what your point is ? this thread is about booting the LATEST twrp on the LATEST firmware because older ones couldn't boot but could only be flashed.
Hello guys
I am trying to flash cm13 on my Yureka(cm11 ) by following the steps
1.unlocked boot loader(by fastboot)
2.flashed twrp recovery (by fastboot)
3.flashed su update(by twrp)
4.copied CM13 Rom file and gapps file into my sd card
5.Rebooted in recovery mode
6.wiped cache,dalvik cache,system,data,internal(eXcept micro sd)
7.Done format system
8.Installed cm13 and gapps
9.Rebooted
Result is got stucked at yu logo :crying:
OTHER METHODS TRIED:
After 9th step i wiped dalvik cache and cache and rebooted
and aslo tried by formating nothing is worked still i stuck at yu logo
Then i thought the problem is with cm13 folder the i tried with RR marshmallo Rom ,miui7 and with infnitive Os but none worked
then i tried crDRoid kitkat version then my phone was properly booted.
i am unable to flash any rom other than crdroid kitkat version
please!!!!!!!!!!!!!!!!!!!!!!! help me with your suggestions:crying:
Thank you
akshay114 said:
Hello guys
I am trying to flash cm13 on my Yureka(cm11 ) by following the steps
1.unlocked boot loader(by fastboot)
2.flashed twrp recovery (by fastboot)
3.flashed su update(by twrp)
4.copied CM13 Rom file and gapps file into my sd card
5.Rebooted in recovery mode
6.wiped cache,dalvik cache,system,data,internal(eXcept micro sd)
7.Done format system
8.Installed cm13 and gapps
9.Rebooted
Result is got stucked at yu logo :crying:
OTHER METHODS TRIED:
After 9th step i wiped dalvik cache and cache and rebooted
and aslo tried by formating nothing is worked still i stuck at yu logo
Then i thought the problem is with cm13 folder the i tried with RR marshmallo Rom ,miui7 and with infnitive Os but none worked
then i tried crDRoid kitkat version then my phone was properly booted.
i am unable to flash any rom other than crdroid kitkat version
please!!!!!!!!!!!!!!!!!!!!!!! help me with your suggestions:crying:
Thank you
Click to expand...
Click to collapse
No mm rom will work unless u first upgrade the default cyanogen software from cm11 to cm12.1 since the bootloader of cm11 is 32bit and cm12.1 is 64bit and all roms mostly are 64bit so they wont boot
So follow the above steps you mentioned the same way but first flash cm12.1 fastboot images and boot then you will be able to flash any rom
Sent from my ONE E1003 using Tapatalk
Hearty thanks for your reply ,cuz i spent more than 5 nights on this but couldnt make it ,now I got clarity about the problem I'll try to implement what you said but how can I update to 12.1 n after that how to root and install twrp or cwm and finally thanks thanks thanks a lot for ur reply
I tried with several KitKat roms
I also tried to install several ROMs, which are based on CM 11, but only 2/20 ROMs have worked.
Rest 18 are not working, and they get stuck up at the 2nd boot screen.
How can I resolve this problem?
loveboy_lion said:
No mm rom will work unless u first upgrade the default cyanogen software from cm11 to cm12.1 since the bootloader of cm11 is 32bit and cm12.1 is 64bit and all roms mostly are 64bit so they wont boot
So follow the above steps you mentioned the same way but first flash cm12.1 fastboot images and boot then you will be able to flash any rom
Sent from my ONE E1003 using Tapatalk
Click to expand...
Click to collapse
1) download cyanogen os 12.1 fastboot images from here http://builds.cyngn.com/factory/tomato/cm-12.1-YOG4PAS3JM-tomato-signed-fastboot.zip
2) download flashing tools from here https://drive.google.com/file/d/0B48lBYmwzkD5cVA1dVFvU0plTW8/view?usp=sharing
3) extract files of both zip files in single folder
4)connect your phone in fastboot mode and check all drivers are installed
5) now open flash-all.bat and let it run
6) if everything went fine then you are done (first boot may take 20 mins after flashing )
7) use this for more http://forum.xda-developers.com/yureka/development/windows-yuware2013266073-t3193757
loveboy_lion said:
1) download cyanogen os 12.1 fastboot images from here http://builds.cyngn.com/factory/tomato/cm-12.1-YOG4PAS3JM-tomato-signed-fastboot.zip
2) download flashing tools from here https://drive.google.com/file/d/0B48lBYmwzkD5cVA1dVFvU0plTW8/view?usp=sharing
3) extract files of both zip files in single folder
4)connect your phone in fastboot mode and check all drivers are installed
5) now open flash-all.bat and let it run
6) if everything went fine then you are done (first boot may take 20 mins after flashing )
7) use this for more http://forum.xda-developers.com/yureka/development/windows-yuware2013266073-t3193757
Click to expand...
Click to collapse
Thanks for your reply
lovely boy am done as u said now how to enter into recovery and how to unlock the device,???
i tried by using
adb reboot bootloader
fastboot -i 0x1ebf oem unlock
fastboot -i 0x1ebf flash recovery recovery-yu.img
and tried to enter into recovery mode but i see a blank screen for few seconds and rebooted into normal mode and switched on
akshay114 said:
Thanks for your reply
lovely boy am done as u said now how to enter into recovery and how to unlock the device,???
i tried by using
adb reboot bootloader
fastboot -i 0x1ebf oem unlock
fastboot -i 0x1ebf flash recovery recovery-yu.img
and tried to enter into recovery mode but i see a blank screen for few seconds and rebooted into normal mode and switched on
Click to expand...
Click to collapse
you have to flash 64 bit recovery 32 bit wont work
http://forum.xda-developers.com/yur...recovery-twrp-2-8-4-0-touch-recovery-t3004699
Hi everyone i flashed kings marshmallow hydrogen os but i didnt like it so i reverted back to my blisspop via nandroid backup. Unfortunately I am know stuck at the oneplus boot screen with the oneplus logo in the middle and the powered by android logo at the bottom. I am unable to boot into twrp. I was able to boot into fastboot mode and managed to flash twrp recovery however the phone will not load into recovery and goes to the oneplus boot screen. I think i softbriked or hard bricked phone because i went from kings hydrogen os which is marshamllow based to my nandroid backup which is blisspop 5.1. IDK what to do know
Bottom line i can boot into fastboot mode. device manager on my pc recognizes phone as android device- marshall london bootlooder interface any suggestions?
If you can Boot to Fastboot you have a softbrick. Somewhere around here is a thread for the recovery tool with the qualcom drivers. Read carefully and maybe give it a try.
Scherzengel said:
If you can Boot to Fastboot you have a softbrick. Somewhere around here is a thread for the recovery tool with the qualcom drivers. Read carefully and maybe give it a try.
Click to expand...
Click to collapse
Ok i thought that was for hardbrick. I will give it a try anyway
neal425 said:
Ok i thought that was for hardbrick. I will give it a try anyway
Click to expand...
Click to collapse
I installed the qualcom drivers and recovery tool, but the recovery tool doesnt do anything
neal425 said:
Hi everyone i flashed kings marshmallow hydrogen os but i didnt like it so i reverted back to my blisspop via nandroid backup. Unfortunately I am know stuck at the oneplus boot screen with the oneplus logo in the middle and the powered by android logo at the bottom. I am unable to boot into twrp. I was able to boot into fastboot mode and managed to flash twrp recovery however the phone will not load into recovery and goes to the oneplus boot screen. I think i softbriked or hard bricked phone because i went from kings hydrogen os which is marshamllow based to my nandroid backup which is blisspop 5.1. IDK what to do know
Bottom line i can boot into fastboot mode. device manager on my pc recognizes phone as android device- marshall london bootlooder interface any suggestions?
Click to expand...
Click to collapse
Do restore again. Flash 5.1.1 patch youre ok
Do you read OP.. Once you go MM you cannot go back without flashing the patch
lummujaj said:
Do restore again. Flash 5.1.1 patch youre ok
Do you read OP.. Once you go MM you cannot go back without flashing the patch
Click to expand...
Click to collapse
can you please elaborate. I have no way of getting into recovery how am i suppose to flash the patch?
Download twrp 3.0.0.0 (since you were MM ) flash it via adb... Reboot to recovery and flash the patch.. After flashin it automaticlly reboot. Than restore backup
lummujaj said:
Download twrp 3.0.0.0 (since you were MM ) flash it via adb... Reboot to recovery and flash the patch.. After flashin it automaticlly reboot. Than restore backup
Click to expand...
Click to collapse
I have done this already... the recovery will not load
lummujaj said:
Download twrp 3.0.0.0 (since you were MM ) flash it via adb... Reboot to recovery and flash the patch.. After flashin it automaticlly reboot. Than restore backup
Click to expand...
Click to collapse
i flash twrp 3.0 using fastboot flash recovery command.....
just so u know
if i type in adb devices nothing is recognized
if i type in fastboot devices my device is recognized
You cant use adb in fastboot mode.. Wtf
fastboot flash recovery recoveryname.img
fastboot boot recoveryname.img
In recovery flash the patch.. Than restore backup.. So simple. Why you complicate
Post cmd comands and results
lummujaj said:
You cant use adb in fastboot mode.. Wtf
fastboot flash recovery recoveryname.img
fastboot boot recoveryname.img
In recovery flash the patch.. Than restore backup.. So simple. Why you complicate
Post cmd comands and results
Click to expand...
Click to collapse
i did flash via fasboot after i flash it says sending recovery (okay) writing recovery (okay) than i reboot but. but when i try to reboot into recovery it does not reboot into RECOVERY it justs stuck at one plust boot screen.
Stucking 1+ logo is because having unsupported recovery from system... After you did restore did you got any error...
Get both recoveries and try command
fastboot boot recoveryname.img
One of them has to boot. Youre doing something wrong
lummujaj said:
Stucking 1+ logo is because having unsupported recovery from system... After you did restore did you got any error...
Get both recoveries and try command
fastboot boot recoveryname.img
One of them has to boot. Youre doing something wrong
Click to expand...
Click to collapse
after i did restore i did not get an error
ive tried to flash twrp 2.87 and twrp 3.0. i promise u i am flashing the recoveries correctly. each time i flash the recovery it says ok. it just wont boot into recovery after it is flashed
Did you try the coomant to boot automaticlly .. Try both recoveries
fastboot boot recoveryname.img
lummujaj said:
Did you try the coomant to boot automaticlly .. Try both recoveries
fastboot boot recoveryname.img
Click to expand...
Click to collapse
just tried that for both recoverie says downloading boot img okay. than it next thing it says remote: dtb not found
lummujaj said:
Did you try the coomant to boot automaticlly .. Try both recoveries
fastboot boot recoveryname.img
Click to expand...
Click to collapse
hey man i really appreciate you taking the time to help me out but i dont think its gonna work, im just gonna use the hardbrick method to restore my phone
Hope you will find a solution... Try firstaid from general section. I still insist about having bad recovery. Or go to op supoort site and back all to stock
Hey friends after unroot my Lenovo a6k+ by universal unroot APK.my phone doesn't root and not install Custom recovery. Now my phone only on stock lollipop Rom.what can I do for flashed a custom roms?
akash shaky said:
Hey friends after unroot my Lenovo a6k+ by universal unroot APK.my phone doesn't root and not install Custom recovery. Now my phone only on stock lollipop Rom.what can I do for flashed a custom roms?
Click to expand...
Click to collapse
Flash this twrp recovery using adb and fastboot tool on pc.
Then flash this latest stable supersu zip through recovery.
sasukay said:
Flash this twrp recovery using adb and fastboot tool on pc.
Then flash this latest stable supersu zip through recovery.
Click to expand...
Click to collapse
I will try this many times but not work.bro???
akash shaky said:
I will try this many times but not work.bro???
Click to expand...
Click to collapse
You get stuck at which step.?
It's work.
sasukay said:
You get stuck at which step.?
Click to expand...
Click to collapse
it's work reboot into TWRP recovery but when i again pressing the vol+ and vol- and power button.so it is on stock recovery.
what can i do for permanently install TWRP Recovery.
akash shaky said:
it's work reboot into TWRP recovery but when i again pressing the vol+ and vol- and power button.so it is on stock recovery.
what can i do for permanently install TWRP Recovery.
Click to expand...
Click to collapse
First boot into twrp recovery and flash supersu zip. Then reboot into bootloader and
Use command "fastboot flash recovery recovery.img" in adb and fastboot tool for permanent flash.
its work.
sasukay said:
First boot into twrp recovery and flash supersu zip. Then reboot into bootloader and
Use command "fastboot flash recovery recovery.img" in adb and fastboot tool for permanent flash.
Click to expand...
Click to collapse
its work thanks.......
my phone keeps booting into recovery (twrp), what should i do?
nevenx said:
my phone keeps booting into recovery (twrp), what should i do?
Click to expand...
Click to collapse
Try flash kernel (boot.img) via fastboot
nevenx said:
my phone keeps booting into recovery (twrp), what should i do?
Click to expand...
Click to collapse
reflash twrp from recovery then boot.img
karrouma said:
reflash twrp from recovery then boot.img
Click to expand...
Click to collapse
Guess I made a mistake by flashing it first via flashtool. Then problem must be in drivers, bcs when i open powershell (win10), it says error null device or something like that. Can you give me a little guide how to make it work? Bcs i had zero problems while i was on oreo...
karrouma said:
reflash twrp from recovery then boot.img
Click to expand...
Click to collapse
i got it everything working, now lets wait for major updates and fixes