Related
Dears;
By miskate, I put on oden the file pit of galaxy 1 instead of 2.
Now my galaxy 2 is dead!!!!
I tried all posibilities even resistances 300K and all failed!
Please advise.
dskeik said:
Dears;
By miskate, I put on oden the file pit of galaxy 1 instead of 2.
Now my galaxy 2 is dead!!!!
I tried all posibilities even resistances 300K and all failed!
Please advise.
Click to expand...
Click to collapse
you can go to download mode?
dskeik said:
Dears;
By miskate, I put on oden the file pit of galaxy 1 instead of 2.
Now my galaxy 2 is dead!!!!
I tried all posibilities even resistances 300K and all failed!
Please advise.
Click to expand...
Click to collapse
If you cant get into download mode you will need a Jig
alesscam said:
you can go to download mode?
Click to expand...
Click to collapse
It would never go to download mode!
USB recovery Jig .
Or to the i never read the instructions phone graveyard .
jje
i've read it in another forum too.
there the user sent his device simply back to the seller and gave the blame to kies and an mistaken fw-upgrading.
black_impact said:
i've read it in another forum too.
there the user sent his device simply back to the seller and gave the blame to kies and an mistaken fw-upgrading.
Click to expand...
Click to collapse
Possible but its equally possible that they charge for repairs .No way Kies will install SGS1 firmware .
If OP cannot fix by the normal methods then its worth a shot at service centre .
jje
as I've read in another forum, this leads to a hardware problem, so even the battery is broken.
Samsung knows how bad kies is, so they do not control it in detail.
they try to flash a new rom and when this fails,they send you an new phone.
in worst case, they send you the phone back, not even more.
JupiterdroidXDA said:
If you cant get into download mode you will need a Jig
Click to expand...
Click to collapse
OP has wrote:
"I tried all posibilities even resistances 300K and all failed!"
.....should be Jig
If not jig, goodluck bro
dskeik said:
Dears;
I tried all posibilities even resistances 300K and all failed!
Please advise.
Click to expand...
Click to collapse
Here is your problem. It needs to be an 301K resistor.
If it does not turn on at all there's no way they'll know how it died. Just send it for service replacement.
Sent from my GT-I9100
I ve read that the 301k resistance would not work with galaxy S II!
I am sure there is still a hope or solution for the latest samsung technology other than the JIG!!
And this is why you never use a pit or tick repartition.
Get a jig, get into download mode, put a sgs2 pit(repetition) and firmware in.
If the jig won't work, sent it back and hope they don't charge you.
Sent from my GT-I9100 using XDA Premium App
USB Jig
What is the technical aspect of the jig?
Hiw it is working?
dskeik said:
What is the technical aspect of the jig?
Hiw it is working?
Click to expand...
Click to collapse
It's just a usb plug with a 301k resistor between pin 4 and pin 5
USB JIG
micila said:
It's just a usb plug with a 301k resistor between pin 4 and pin 5
Click to expand...
Click to collapse
Thanks so much.
I have did this manually and locally but didn't work on my Galaxy S 2!!
I am afraid when I buy this would also nit work!
The phone will be hard bricked with an incorrect PIT file. The good news is I am capable of fixing this if needed. I'm also much faster and simpler to work with than a Samsung Centre... . MOD's I'm simply trying to let the OP know an option if needed...
EDIT. Pm me if you need help...
Man, why don't you make a tutorial of how to do this instead of making bucks over other people's loss?
Um......because its a service he offers, why not profit????? But yes, a tutorial would be helpful
Sent from my GT-I9100 using XDA Premium App
Dear all
I'm used to root my phone or tablet (kaiser, topaz, transformer). I've try this week to root my galaxy s2 (g i9100p with i3) with odin and a cf.root for it.
I follow strictly the several tuto is found and after correct flash(all green) the s2 refuse to restart. After two days turning ariund i found an issue with my usb connector. I changed and everything works find. If it can help
All the best for 2013
Sent from my Transformer using xda app-developers app
I fail to see why that would be caused by a problem of odin or cfroot.
Cenobite_ said:
I fail to see why that would be caused by a problem of odin or cfroot.
Click to expand...
Click to collapse
It's a problem because everything look ok green ligth and pass and in reallity it fail to do the job. It's not completely robust. But in any case it stay a great tool.
Sent from my Transformer using xda app-developers app
Seems more like bad cable thab odin or cf root issue.
Sent from my GT-I9100 using xda premium
your phone i9100p..cfroot is for i9100...so?
matk said:
Dear all
I'm used to root my phone or tablet (kaiser, topaz, transformer). I've try this week to root my galaxy s2 (g i9100p with i3) with odin and a cf.root for it.
I follow strictly the several tuto is found and after correct flash(all green) the s2 refuse to restart. After two days turning ariund i found an issue with my usb connector. I changed and everything works find. If it can help
All the best for 2013
Sent from my Transformer using xda app-developers app
Click to expand...
Click to collapse
ur info is incomplete! First of all ur not clear whether u flashed I9100/I9100P kernel or I1900G version, also make sure u used correct version of kernel. bcoz i have done it some 3-4 times never gone wrong no issues.. Did u try to turn on phone to download mode? Is it working?
matk said:
..."After two days turning ariund i found an issue with my usb connector"...
Click to expand...
Click to collapse
Anyway I really wonder how Odin+CF Root will damage your usb connector. Your cable is problematic, not Odin.
He is saying that odin didn't recognize the problem with his usb. Perhaps something that could be improved upon. Could've been explained better though
I has a sig
Dear all,
Clearly odin cannot dommage physicaly a usb cable or we are all together living inside the Matrix.
What i try to explain is that my computer have a usb port not well configured. I try to use odin on this slot and odin they PASS but in fact the flash crash.
I change the port and reuse odin and this time it works.
So the only concern is link to the realiability of odin, the fact that it state that the flash was passed and it was not the case.
This tools works well it's only a warning and not at all a critic against it.
Sent from my Transformer using xda app-developers app
Prashanthme said:
ur info is incomplete! First of all ur not clear whether u flashed I9100/I9100P kernel or I1900G version, also make sure u used correct version of kernel. bcoz i have done it some 3-4 times never gone wrong no issues.. Did u try to turn on phone to download mode? Is it working?
Click to expand...
Click to collapse
+1 . I Agree with above comment. Complete an Information of your problem before you make a thread..
Vinesandroid said:
+1 . I Agree with above comment. Complete an Information of your problem before you make a thread..
Click to expand...
Click to collapse
Please read my comments i'm never spoke about pb of selection of incorrect cfroot. It's only a question of hardware and reliability of the status of the flash by odin. But sorry my english is maybe to poor to be understandable.
Sent from my Transformer using xda app-developers app
hello every one, my galaxy y was working fine for the last 2 months but suddenly it became indetectable in any computer and it's charging by it self some times . I have no clue what to do
zmagriz said:
hello every one, my galaxy y was working fine for the last 2 months but suddenly it became indetectable in any computer and it's charging by it self some times . I have no clue what to do
Click to expand...
Click to collapse
Flash the stock rom of your region.
aniket.lamba said:
Flash the stock rom of your region.
Click to expand...
Click to collapse
eeeasy, What are you trying to say?
zmagriz said:
eeeasy, What are you trying to say?
Click to expand...
Click to collapse
hes saying by flashing stock rom via odin you will eliminate any software problems
If the problem remains after flashing stock rom via odin then its a hardware problem and you need to take your phone to a repair shop
other things you could try is just wiping cache and battery stats in cwm before flashing stock rom via odin to see if that sorts the charging problem
zmagriz said:
hello every one, my galaxy y was working fine for the last 2 months but suddenly it became indetectable in any computer and it's charging by it self some times . I have no clue what to do
Click to expand...
Click to collapse
Try to blow your usb port. thats my way to fix that
GSculerlor said:
Try to blow your usb port. thats my way to fix that
Click to expand...
Click to collapse
well, you have a funny different way than mine of dealing with your problems. I say I blow the all phone up and get an other one :highfive:
marcussmith2626 said:
hes saying by flashing stock rom via odin you will eliminate any software problems
If the problem remains after flashing stock rom via odin then its a hardware problem and you need to take your phone to a repair shop
other things you could try is just wiping cache and battery stats in cwm before flashing stock rom via odin to see if that sorts the charging problem
Click to expand...
Click to collapse
I can't use odin cuz i'm not able to connect my phone to the computer, I tried the all wiping and CWM thing still the same problem, I think it's the mini USB connector is broken, I'm gonna change it and see what I'll get.
GSculerlor said:
Try to blow your usb port. thats my way to fix that
Click to expand...
Click to collapse
zmagriz said:
well, you have a funny different way than mine of dealing with your problems. I say I blow the all phone up and get an other one :highfive:
Click to expand...
Click to collapse
By word "blow" he means blowing air by air blower at very fast rate. He does not mean blast the port.
:laugh:
You say charging is working. Then it doesn't seems problem with connector. Anyway try by changing USB cable.
Sent from my GT-S5360 Gadget of Mass Destruction by xda-app
using CWM........Busybox commands........ No I use my hands
hnkotnis said:
By word "blow" he means blowing air by air blower at very fast rate. He does not mean blast the port.
:laugh:
You say charging is working. Then it doesn't seems problem with connector. Anyway try by changing USB cable.
Sent from my GT-S5360 Gadget of Mass Destruction by xda-app
using CWM........Busybox commands........ No I use my hands
Click to expand...
Click to collapse
Haha thats a simple way without any command
FIXED!!!
GSculerlor said:
Try to blow your usb port. thats my way to fix that
Click to expand...
Click to collapse
THANK YOU SO MUCH! Simple, yet VERY EFFECTIVE fix!!
Hi
The new Note 4 firmware available today from can it be installed on the Note 3?
thanks.
..
No you cant install it. That would be like flashing a htc desire rom on your note 3
Note 3
maskerwsk said:
No you cant install it. That would be like flashing a htc desire rom on your note 3
Click to expand...
Click to collapse
even though I have a Note 3 LTE SM N9005. it is almost identical?
why not if I may ask.
tomjo11 said:
even though I have a Note 3 LTE SM N9005. it is almost identical?
why not if I may ask.
Click to expand...
Click to collapse
Try it yourself if you think it'll work, no one else will do it for you
Hes been sarcastic surely! Or been one of those people who live to wind people up
Guys are you serious ?? The second you flash note 4 rom you will get your phone bricked don't listen to the trolls here
The N4 firmware has unique system drivers that are incompatible with any other phone, it will not work on the N3. It probably won't even flash. I'm sure you could extract the apps and install some of the system apks, but please don't actually try to flash the whole firmware or you will likely brick your phone.
I love this
Sent from my SM-N9005
Note 4 firmware can't be flashed on Note 3
kabuk1 said:
The N4 firmware has unique system drivers that are incompatible with any other phone, it will not work on the N3. It probably won't even flash. I'm sure you could extract the apps and install some of the system apks, but please don't actually try to flash the whole firmware or you will likely brick your phone.
Click to expand...
Click to collapse
Thanks but I guess to late, I already tried and it didn't work. Reflashed original Note 3 firmware and it works.
tomjo11 said:
Thanks but I guess to late, I already tried and it didn't work. Reflashed original Note 3 firmware and it works.
Click to expand...
Click to collapse
Oh really. Good job mate
Thanks
I need your help man. My note 3 works fine on official firmware but the network dissappears when i flash a custom rom , it's was working b4 and i don't know what caused this. Help!
Sent from my SM-N9005 using XDA Free mobile app
kumuyi said:
I need your help man. My note 3 works fine on official firmware but the network dissappears when i flash a custom rom , it's was working b4 and i don't know what caused this. Help!
Sent from my SM-N9005 using XDA Free mobile app
Click to expand...
Click to collapse
Reflash the stock firmware via Odin may help.
Sent from my Nexus 7 using Tapatalk
Ive done it many times but to no avail..
Sent from my SM-N9005 using XDA Free mobile app
The guy asked simple question, a simple answer would have sufficed! People come to ask questions and get help, isn't that the whole purpose of the forums? I'm guessing all you lot giving the guy a hard time were instantly android experts from day 1 hey..
Everything about the Note 4 OS is different. Even the image file extensions in the apps are different. You have a $300 paperweight most likely
Note 3. have you tried a different rom ?
kumuyi said:
Ive done it many times but to no avail..
Sent from my SM-N9005 using XDA Free mobile app
Click to expand...
Click to collapse
try different rom or goto settings mobile networks and search for mobile networks.
kumuyi said:
Ive done it many times but to no avail..
Sent from my SM-N9005 using XDA Free mobile app
Click to expand...
Click to collapse
goto settings more networks under connection tab then mobile networks then network operators and search for them. If that fails try differ rom and if that fails I am assuming you have somehow changed your modem. Find one for your country and flash using odin.
Also try Kies emergency firmware recovery using windows laptop or pc.
Hello
¨(my note 3 is not booting, not charging, BUT when I connect it to to my PC it recognizes it as ¨Qualcomm HS-USB QDLoader 9008(COM6[]
I downloaded an app created by qualcom called QPST Configuration
¨The app recognizes the phone and says
¨Phone detected in download mode¨
Come on developers, show us how good you guys are:victory:
have you flashed someting befor you get this problem?
vasilisaerox said:
have you flashed someting befor you get this problem?
Click to expand...
Click to collapse
Yup ..
I tried to flash lollipop on it via Odin. .
Sent from my SM-N910W8 using XDA Free mobile app
If you dont have something important to lose then go to recovery mode and do factory reset and case and reboot
vasilisaerox said:
If you dont have something important to lose then go to recovery mode and do factory reset and case and reboot
Click to expand...
Click to collapse
I wish I could.
The phone does not turn on.
Its like .. dead!
BUT as I said the computer does recognize it. When I plug the phone into the PC , the PC makes sound.
BUT Odin does NOT recognize it because the phone does not turn on thus, I can't boot into download mode. .
Thanks for your help by the way..
Sent from my SM-N910W8 using XDA Free mobile app
Come on developers I believe in you..
There must be something that can be done..
Show us how good you are..
I'll buy you a beer:beer:
Sent from my SM-N910W8 using XDA Free mobile app
try that....take the battery out and press the power button for one minute and then let the phone without battery for 10 minutes and then try to boot and if its not working repeat and try to go to recovert or downloas mode
vasilisaerox said:
try that....take the battery out and press the power button for one minute and then let the phone without battery for 10 minutes and then try to boot and if its not working repeat and try to go to recovert or downloas mode
Click to expand...
Click to collapse
Tried it several times now..
Still not working
Sent from my SM-N910W8 using XDA Free mobile app
There are interesting threads if you google for the ID (Qualcomm HS-USB QDLoader 9008) you get on your PC now:
http://forum.xda-developers.com/showthread.php?t=2476353
https://forums.oneplus.net/threads/solved-i-think-i-bricked-my-phone-for-real-this-time.228153/
So there are ways, but the best way seems to be JTAG in that case. Anything else is possible, but on a quick search I did not find a way which is for exactly your device...
OOOOR you send it for repair to Samsung ^^
emuandco said:
There are interesting threads if you google for the ID (Qualcomm HS-USB QDLoader 9008) you get on your PC now:
http://forum.xda-developers.com/showthread.php?t=2476353
https://forums.oneplus.net/threads/solved-i-think-i-bricked-my-phone-for-real-this-time.228153/
So there are ways, but the best way seems to be JTAG in that case. Anything else is possible, but on a quick search I did not find a way which is for exactly your device...
OOOOR you send it for repair to Samsung ^^
Click to expand...
Click to collapse
I've sent it to a local repair shop nearby. . Not samsung..
He took the phone for a week and a half. He could not fix it.
He told me he even tried J tag..
His conclusion was that the motherboard is broken.
But I don't believe him because I think if the motherboard is truly broken the PC would not recognize the phone..
What do you guys think?
Sent from my SM-N910W8 using XDA Free mobile app
I dont if you have seen this but check it out its kinda old and for an other phone but you can get a brain storm
http://forum.xda-developers.com/showthread.php?t=1526600
Sent from my SM-N9005 using XDA Free mobile app
o-ellinas said:
I dont if you have seen this but check it out its kinda old and for an other phone but you can get a brain storm
http://forum.xda-developers.com/showthread.php?t=1526600
Sent from my SM-N9005 using XDA Free mobile app
Click to expand...
Click to collapse
I bought a jig from China, it worked on my other phones but did not work on this one. I believe a jig is only used for soft bricks and I believe mine is hard bricked. I'm not sure though. That's why I'm asking for the help of the developers.
Thanks for your help.
Sent from my SM-N910W8 using XDA Free mobile app
did you tried to boot your note without your battery just the cables?
xhamadeex said:
I've sent it to a local repair shop nearby. . Not samsung..
He took the phone for a week and a half. He could not fix it.
He told me he even tried J tag..
His conclusion was that the motherboard is broken.
But I don't believe him because I think if the motherboard is truly broken the PC would not recognize the phone..
What do you guys think?
Sent from my SM-N910W8 using XDA Free mobile app
Click to expand...
Click to collapse
If it's that broken I suggest to take it to Samsung. They won't see any modifications anymore and won't take the time to dig deeper. Just tell em it did shutdown somewhere in standby overdays and never woke up anymore.
emuandco said:
If it's that broken I suggest to take it to Samsung. They won't see any modifications anymore and won't take the time to dig deeper. Just tell em it did shutdown somewhere in standby overdays and never woke up anymore.
Click to expand...
Click to collapse
The problem is that my warranty has expired .. :XD
Sent from my SM-N910W8 using XDA Free mobile app
I understand you're having trouble getting your N9005 to download mode. I was having the same problem.
http://forum.xda-developers.com/galaxy-note-3/help/help-sm-n9005-hard-bricked-sd-partial-t3070743 check my thread, it could be helpful to you.
See the threads I've mentioned on it. Maybe you can get ODIN to recognize your phone. But probably that won't be enough, at least it wasn't for me. You can give it a try though...
Skactus said:
I understand you're having trouble getting your N9005 to download mode. I was having the same problem.
http://forum.xda-developers.com/galaxy-note-3/help/help-sm-n9005-hard-bricked-sd-partial-t3070743 check my thread, it could be helpful to you.
See the threads I've mentioned on it. Maybe you can get ODIN to recognize your phone. But probably that won't be enough, at least it wasn't for me. You can give it a try though...
Click to expand...
Click to collapse
I will try it.. Thank you
Sent from my SM-N910W8 using XDA Free mobile app
Get the .PIT file. This file is a saving grace
speedyjay said:
Get the .PIT file. This file is a saving grace
Click to expand...
Click to collapse
The problem is which file should I choose
I tried some files before but did not work
I have n900w8
Anyway.. I have final exams now.. I will try all of the files as soon as I finish..
I'm glad to see more suggestions. .
Thank you
Sent from my SM-N910W8 using XDA Free mobile app
speedyjay said:
Get the .PIT file. This file is a saving grace
Click to expand...
Click to collapse
PIT file is a saving grace if it works. I've tried 6 different ones so far and none of them worked. Any other suggestion?