Related
i took the liberty of replacing the images in the script in this thread: http://forum.xda-developers.com/showthread.php?t=1669093 with the ones in the JB factory image . the script works with JB . i will upload a link for stock JB . if that is an inconvenience for one of the two mentioned bellow... please tell me and i'll remove it . enjoy .
the method is simple :
1. enable usb debugging
2. run the script and follow instructions
3.now you run jb stock factory image .
thank you HosainH( for sharing) and michaelpeerman (the original source )
and here it is :
i9023/i9020t: https://docs.google.com/open?id=0BxOITIU5B1JYbkJWZ2R3Rk5BWjA
mirror: http://www.4shared.com/folder/n5bUU9Cw/one_click_stock_i9023_i9020t.html
i9020a: http://www.4shared.com/folder/nzNXF0Tc/one_click_stock_i9020a.html
raducux said:
i took the liberty of replacing the images in the script in this thread: http://forum.xda-developers.com/showthread.php?t=1669093 with the ones in the JB factory image . the script works with JB . i will upload a link for stock JB . if that is an inconvenience for one of the two mentioned bellow... please tell me and i'll remove it . enjoy .
the method is simple :
1. enable usb debugging
2. run the script and follow instructions
3.now you run jb stock factory image .
thank you HosainH( for sharing) and michaelpeerman (the original source )
and here it is :
https://docs.google.com/open?id=0BxOITIU5B1JYbkJWZ2R3Rk5BWjA
Click to expand...
Click to collapse
Error 404 on the google doc link
I posted a question a few days ago asking how to unroot and revert back to stock. I have a physical phone problem with my device and need warranty repairs.
If I follow your post instr then I will end up with the JB OTA stock image, unrooted with a locked bootloader? If so it's the answer I've been looking for!
Does this work on all versions of nexus s?
Sent from my Nexus S using Tapatalk 2
No it does not work on all versions of ns... as it has the factory image for soju ( i9023 and i9020 international versions. Does the link work ? Where else could i upload a folder ?
Sent from my Nexus S using xda app-developers app
tweeny80 said:
I posted a question a few days ago asking how to unroot and revert back to stock. I have a physical phone problem with my device and need warranty repairs.
If I follow your post instr then I will end up with the JB OTA stock image, unrooted with a locked bootloader? If so it's the answer I've been looking for!
Click to expand...
Click to collapse
It would get your phone to stock 4.1,1 official google image not rooted... as for the bootloader it locks it. But if not you could just use the "fastboot oem lock" comand
Sent from my Nexus S using xda app-developers app
Could you create one for i920a it would be nice
Sent from my Nexus S using Tapatalk 2
Imppy said:
Could you create one for i920a it would be nice
Sent from my Nexus S using Tapatalk 2
Click to expand...
Click to collapse
ill try but i dont really know a good upload space
Drop box or Google drive!
Sent from my Nexus S using Tapatalk 2
Imppy said:
Drop box or Google drive!
Sent from my Nexus S using Tapatalk 2
Click to expand...
Click to collapse
im uploading it now for the i9020a
Awesome now all the devices are supported I believe! Its handy when you want to go fully stock to check if it is device specific problem or ROM ..or to send it for repair
Sent from my Nexus S using Tapatalk 2
tweeny80 said:
I posted a question a few days ago asking how to unroot and revert back to stock. I have a physical phone problem with my device and need warranty repairs.
If I follow your post instr then I will end up with the JB OTA stock image, unrooted with a locked bootloader? If so it's the answer I've been looking for!
Click to expand...
Click to collapse
A script can accomplish anything that a user can accomplish on their own by doing the same commands. If there is a hardware or software error on the device that is preventing it from working the manual way then the script won't work either.
Imppy said:
Awesome now all the devices are supported I believe! Its handy when you want to go fully stock to check if it is device specific problem or ROM ..or to send it for repair
Sent from my Nexus S using Tapatalk 2
Click to expand...
Click to collapse
yes it is useful ..thats why i made it ,, its just an easier way ,:highfive:
but im too lazy to upload for all variants because the upload takes like an hour and here in romania it is 7 am
albundy2010 said:
A script can accomplish anything that a user can accomplish on their own by doing the same commands. If there is a hardware or software error on the device that is preventing it from working the manual way then the script won't work either.
Click to expand...
Click to collapse
Hi ... yes I understand what you're saying. My phone's problem is possibly the micro USB port, seems to be working poorly. Phone charges but my PC and laptop suddenly don't recognise the device when connected by cable. Bear in mind I did drop my phone in muddy grass (ports got mud-filled) three days earlier, causing latent damage only now seen.
SO b4 I take it for warranty repair need to unroot etc but all methods required a working USB cable ... this method seems to be the answer I need. You agree?
You still need usb for this... you have to have usb debugging on....copy the folder to your computer and click run. It will do the rest with a few keys
Sent from my Nexus S using xda app-developers app
Cheers man, i'll keep this bookmarked for when i sell my phone. Dont wanna be giving out a rooted/non-wiped device
-Proxan
raducux said:
You still need usb for this... you have to have usb debugging on....copy the folder to your computer and click run. It will do the rest with a few keys
Sent from my Nexus S using xda app-developers app
Click to expand...
Click to collapse
So...I have not fully understood the OP's method. I foolishly assumed this procedure didn't require USB connection to my PC (which does not work anymore because PC no longer recognises my device via cable after some likely water damage).
Any idea how I can revert back to stock JB or ICS with a locked bootloader unrooted etc WITHOUT connecting to my PC via cable?? I really need to get this fixed under warranty.
Thanks in advance.
it says "waiting for device" and stops there...why??what can i do??
Learn how to do it the manual way and stop with these IMHO stupid damn toolkits.
Not directed at you or anybody but if you're not capable of installing drivers and unlocking with fastboot etc you have no business to actually have root access/unlocked bootloader etc.
any one can provide me mirrror for both cannot download from 4shared
I've tried my USB jig on my i9505 and my uncles i9500 with my jig and my brothers jig, and surprisingly, they still get the phones into download mode. I'm not sure if it resets the flash counter though.
Feature:
Forcing device into download mode.
Removing Triangle but not resetting flash counter??? (Still Unconfirmed)
TL;DR USB JIGS DO WORK, HOWEVER THEY ONLY PLACE THE PHONE INTO DOWNLOAD MODE!
I'll update the thread for newbs and noobs with a guide on how to use a USB jig, it's a good investment if you're scared you might brick your phone, they cost around a £1.
If you cannot obtain a USB Jig by purchasing, consider borrowing one, here are threads that have names of people who are available to lend you a USB jig:
http://forum.xda-developers.com/showthread.php?t=1891197
Or make one yourself:
http://forum.xda-developers.com/showthread.php?t=1604707
(IT WON'T WORK IF YOU HAVE USED THE WRONG .pit FILE AND RE-FORMATTED, YOU NEED TO USE A JTAG RIFF, NEW MOTHERBOARD OR SEND BACK TO SAMSUNG!! (Personal Experience ;A)
Just did the same yesterday and was surprised too :cyclops:
My my counter was 0 so I can't tell ...
So PLS somebody with a counter > 0 and good old JIG LOL
Mittaa said:
Just did the same yesterday and was surprised too :cyclops:
My my counter was 0 so I can't tell ...
So PLS somebody with a counter > 0 and good old JIG LOL
Click to expand...
Click to collapse
I thought it'd stop working after the S3 but I'm happy it works, now I don't have to buy more tools and shiz!
Off-topic:
Also my post restrictions are really annoying!
My counter is currently on 3 so, if no one tries it in the mean time, I will try this with my I9100 jig at home later this evening and let you know if it resets it.
Pagnell said:
My counter is currently on 3 so, if no one tries it in the mean time, I will try this with my I9100 jig at home later this evening and let you know if it resets it.
Click to expand...
Click to collapse
I think after the S3, It should really just be called a jig instead of assigning it a certain model Thanks btw! <3
It won't reset counter and change to official status. Just tried.
JayceOoi said:
It won't reset counter and change to official status. Just tried.
Click to expand...
Click to collapse
So all in all same results as the S3 then. Will update topic when I get to laptop
Sent from my GT-I9505 using xda app-developers app
JayceOoi said:
It won't reset counter and change to official status. Just tried.
Click to expand...
Click to collapse
Indeed. It does go into download mode but the counter is not reset.
Sent from my GT-I9505 using xda app-developers app
It does however seem to prevent the triangle from appearing
Sent from my Galaxy S IV
lambstone said:
It does however seem to prevent the triangle from appearing
Sent from my Galaxy S IV
Click to expand...
Click to collapse
Pagnell said:
Indeed. It does go into download mode but the counter is not reset.
Sent from my GT-I9505 using xda app-developers app
Click to expand...
Click to collapse
JayceOoi said:
It won't reset counter and change to official status. Just tried.
Click to expand...
Click to collapse
So it puts the device into download mode, does not reset the flash counter but does get rid of the triangle noting an insecure kernel? Then it works better than it does on the S3
Sent from my GT-I9505 using xda app-developers app
robolo said:
So it puts the device into download mode, does not reset the flash counter but does get rid of the triangle noting an insecure kernel? Then it works better than it does on the S3
Sent from my GT-I9505 using xda app-developers app
Click to expand...
Click to collapse
Seems like it. I did not use the triangle away or anything like that but I did flash an insecure kernel for rooting and did not get the yellow triangle.
Also confirming that usb jig will go into download mode, but will not set counter to 0 or "official". Used triangle away to do that.
Sent from my GT-I9505 using Tapatalk 2
Since USB jigs are confirmed to at least place the phone into download mode, shouldn't we tell a mod or someone to place a link or something to the "Borrow a JIG" thread that's in the S2 and S3 forums?
robolo said:
Since USB jigs are confirmed to at least place the phone into download mode, shouldn't we tell a mod or someone to place a link or something to the "Borrow a JIG" thread that's in the S2 and S3 forums?
Click to expand...
Click to collapse
I'm on the S2 list and would suggest OP (Robolo) place links to S2 and S3 threads so people can go there if needed
Mittaa said:
I'm on the S2 list and would suggest OP (Robolo) place links to S2 and S3 threads so people can go there if needed
Click to expand...
Click to collapse
Updated thread! It needs cleaning but I don't have the time, let's hope the weekend'll be kind!
Guys? Would this be sticky worthy for nubs? Or let is roam around and get bumped when searched on google?
robolo said:
Guys? Would this be sticky worthy for nubs? Or let is roam around and get bumped when searched on google?
Click to expand...
Click to collapse
I found the thread via Google.
loociddreemr said:
I found the thread via Google.
Click to expand...
Click to collapse
Was this thread helpful?
Sent from my GT-I9505 using xda app-developers app
To reset the counter by jig we need an unlocked bootloader. The jig works, but we don't have the proper bootloader ...
lambstone said:
Seems like it. I did not use the triangle away or anything like that but I did flash an insecure kernel for rooting and did not get the yellow triangle.
Click to expand...
Click to collapse
S4's and S3's never had a yellow triangle when flashing. Only the country went up and in some cases a tiny red exclamation mark.
Sent from my GT-I9505 using xda premium
Hello XDA,
So yesterday i installed the pac-man ROM 4.4.2 on my Galaxy S4 (i9500) and all was going well. Then i tried installing Unicon ( a utility which manages your icon packs). I have installed this app on every android phone i have ever had and every time it asks me to go into xposed and enable it like it usually does.
So i go into xposed and i click on install/update. It shows a dialog saying that (some file name i don't remember) is already there and continue if you are feeling adventurous. Being the stupid person I am i continued.
After switching off the device, the screen is absolutely black and does not even go to download mode or recovery mode.
Please help me I'm almost crying as the warranty just ran out and it wont get replaced or anything. I don't even have the money to buy a new phone right now.
Please tell me what to do to fix this i don't care about the data or anything i just want my phone to be fixed please help me..........:crying:
shivap1998 said:
Hello XDA,
So yesterday i installed the pac-man ROM 4.4.2 on my Galaxy S4 (i9500) and all was going well. Then i tried installing Unicon ( a utility which manages your icon packs). I have installed this app on every android phone i have ever had and every time it asks me to go into xposed and enable it like it usually does.
So i go into xposed and i click on install/update. It shows a dialog saying that (some file name i don't remember) is already there and continue if you are feeling adventurous. Being the stupid person I am i continued.
After switching off the device, the screen is absolutely black and does not even go to download mode or recovery mode.
Please help me I'm almost crying as the warranty just ran out and it wont get replaced or anything. I don't even have the money to buy a new phone right now.
Please tell me what to do to fix this i don't care about the data or anything i just want my phone to be fixed please help me..........:crying:
Click to expand...
Click to collapse
Not an expert but try to buy an USB JIG that force your phone into download mode. At that point, you can flash a recovery or a rom directly via odin. :good:
Well, it has nothing to do with Xposed. You can almost impossible brick it that way.
Did you try a simple thing like taking the battery out?
Yes I tried removing everything I could including battery Sim card SD card. Still not working. some people have said that in hard brick their devices give out red led but my phone doesn't even do that. Its just like a brick. Somebody pls help me ;( my dad doesn't let me use the credit card online and I can't find the USB jig anywhere near me so I can't get it.
Sent from my Nexus 7 using XDA Free mobile app
shivap1998 said:
Yes I tried removing everything I could including battery Sim card SD card. Still not working. some people have said that in hard brick their devices give out red led but my phone doesn't even do that. Its just like a brick. Somebody pls help me ;( my dad doesn't let me use the credit card online and I can't find the USB jig anywhere near me so I can't get it.
Sent from my Nexus 7 using XDA Free mobile app
Click to expand...
Click to collapse
Try asking here: http://forum.xda-developers.com/showthread.php?t=2265477
My phone is hard bricked where as that link is for soft bricked phones. Thank you anyways.....
Sent from my Nexus 7 using XDA Free mobile app
Your phone is not bricked. The way you descriped is almost impossible to brick it.
You got a faulty battery or a hardware failure.
Hi,
I and a friend had a similar issue to yours. Our S4 was very slow and we took out the battery, now it doesn't even show Samsung Splash Screen (same issue, different context). Unfortunately, JIG won't do the work there (I tried).
While my friend sent it to warranty I didn't have mine because it was bought in US and I'm from Brazil. It looks like a viable way of solving it is using a tool called JTAG, I'm waiting for a friend to bring to my town his JTAG to see if it works, I'll report here the results, I recommend you searching for it .
~Lord
"Time is too short to cry, long enough to try." - March of Time (Helloween)
Sent from my KitKat Nexus 10
Thank you but are you sure the jig won't work? As my case is different I think it might... Thanks anyway I will try looking for a JTAG......
Sent from my Nexus 7 using XDA Free mobile app
shivap1998 said:
Thank you but are you sure the jig won't work? As my case is different I think it might... Thanks anyway I will try looking for a JTAG......
Sent from my Nexus 7 using XDA Free mobile app
Click to expand...
Click to collapse
You sure you'll look for the JTAG device? The Jtag box cost around $210.
shivap1998 said:
Thank you but are you sure the jig won't work? As my case is different I think it might... Thanks anyway I will try looking for a JTAG......
Sent from my Nexus 7 using XDA Free mobile app
Click to expand...
Click to collapse
Hi,
JIG will only work
if you can get at least in Splash Screen, if it doesn't give any life signal, then I get that you can't get into Splash Screen, therefore, JIG won't do the work.
Here's a video showing exactly the same problem I had and a JTAG repair
Samsung Galaxy S4 - JTAG Brick Repair Service (De…: http://youtu.be/PkfEhu4trRY
Andy0625 said:
You sure you'll look for the JTAG device? The Jtag box cost around $210.
Click to expand...
Click to collapse
Hi,
There are people who can do the JTAG work, they charge some money but fix it. Even though it is way cheaper than getting a JTAG interface . Buying a device would be way more expensive, and I think it wouldn't be really worth, like you mentioned .
~Lord
"Time is too short to cry, long enough to try." - March of Time (Helloween)
Sent from my KitKat Nexus 10
Guys, I like the talk about JTAG, but I don't think it will do him any good.
His device is not bricked. Xposed only installs in /system/bin (if I am not mistaken). Thus it's impossible to brick it that way. It does nothing to the bootloader, download mode or any other partition.
He has clearly a faulty battery or an other hardware failure. He just had bad luck imo.
Are you sure about that? I'll try changing the battery.... But as I said I can't enter download mode or recovery ,both are symptoms of a hard brick....
And any idea where I can find a person with JTAG in Gurgaon(India)?
Sent from my Nexus 7 using XDA Free mobile app
shivap1998 said:
Are you sure about that? I'll try changing the battery.... But as I said I can't enter download mode or recovery ,both are symptoms of a hard brick....
And any idea where I can find a person with JTAG in Gurgaon(India)?
Sent from my Nexus 7 using XDA Free mobile app
Click to expand...
Click to collapse
Sounds like a dead battery. Get your battery charged using an external charger or using a friend's working S4.
If yur mobile is dead try this procedure link below, This procedure vil wrk on i9300, n7100,i9500 tested by me. no need to follow ful method create bootable memory card insert the card into yur mobile insert battery den connect usb jig wait for 10 to 15 min yur mob sud boot into download mode. aftr boot flash vit multi file firmware vit pit dnt flash kitkat. boz aftr deadboot repair yu hav to repair imei . 4.2.2 or 4.3.3 is better to repair .
http://forum.xda-developers.com/gal...n7100-dead-t2647558/post50305456#post50305456
Sorry but the IMEI fix is only for i9300 and I don't have all the required stuff for the procedure.
Sent from my Nexus 7 using XDA Free mobile app
with tis method yur mob vil turn on but for imei fix yu need software boxes . 1st need to repair efs den write original imei. better go to any nearest service center its easly fixable prob
Thank you all for your help guyz but now as you can see (signature) my phone is now fixed. I just went to a shop and got it fixed for Rs 900 ($15). Thank you all for your help .
Sent from my awesome GS4 (I9500)
shivap1998 said:
Thank you all for your help guyz but now as you can see (signature) my phone is now fixed. I just went to a shop and got it fixed for Rs 900 ($15). Thank you all for your help .
Sent from my awesome GS4 (I9500)
Click to expand...
Click to collapse
Did you came to know, what was the problem with your device?
Sorry for the last reply but sorry I wasn't able to find out what was wrong....
Sent from my C2104 using XDA Free mobile app
Hello
¨(my note 3 is not booting, not charging, BUT when I connect it to to my PC it recognizes it as ¨Qualcomm HS-USB QDLoader 9008(COM6[]
I downloaded an app created by qualcom called QPST Configuration
¨The app recognizes the phone and says
¨Phone detected in download mode¨
Come on developers, show us how good you guys are:victory:
have you flashed someting befor you get this problem?
vasilisaerox said:
have you flashed someting befor you get this problem?
Click to expand...
Click to collapse
Yup ..
I tried to flash lollipop on it via Odin. .
Sent from my SM-N910W8 using XDA Free mobile app
If you dont have something important to lose then go to recovery mode and do factory reset and case and reboot
vasilisaerox said:
If you dont have something important to lose then go to recovery mode and do factory reset and case and reboot
Click to expand...
Click to collapse
I wish I could.
The phone does not turn on.
Its like .. dead!
BUT as I said the computer does recognize it. When I plug the phone into the PC , the PC makes sound.
BUT Odin does NOT recognize it because the phone does not turn on thus, I can't boot into download mode. .
Thanks for your help by the way..
Sent from my SM-N910W8 using XDA Free mobile app
Come on developers I believe in you..
There must be something that can be done..
Show us how good you are..
I'll buy you a beer:beer:
Sent from my SM-N910W8 using XDA Free mobile app
try that....take the battery out and press the power button for one minute and then let the phone without battery for 10 minutes and then try to boot and if its not working repeat and try to go to recovert or downloas mode
vasilisaerox said:
try that....take the battery out and press the power button for one minute and then let the phone without battery for 10 minutes and then try to boot and if its not working repeat and try to go to recovert or downloas mode
Click to expand...
Click to collapse
Tried it several times now..
Still not working
Sent from my SM-N910W8 using XDA Free mobile app
There are interesting threads if you google for the ID (Qualcomm HS-USB QDLoader 9008) you get on your PC now:
http://forum.xda-developers.com/showthread.php?t=2476353
https://forums.oneplus.net/threads/solved-i-think-i-bricked-my-phone-for-real-this-time.228153/
So there are ways, but the best way seems to be JTAG in that case. Anything else is possible, but on a quick search I did not find a way which is for exactly your device...
OOOOR you send it for repair to Samsung ^^
emuandco said:
There are interesting threads if you google for the ID (Qualcomm HS-USB QDLoader 9008) you get on your PC now:
http://forum.xda-developers.com/showthread.php?t=2476353
https://forums.oneplus.net/threads/solved-i-think-i-bricked-my-phone-for-real-this-time.228153/
So there are ways, but the best way seems to be JTAG in that case. Anything else is possible, but on a quick search I did not find a way which is for exactly your device...
OOOOR you send it for repair to Samsung ^^
Click to expand...
Click to collapse
I've sent it to a local repair shop nearby. . Not samsung..
He took the phone for a week and a half. He could not fix it.
He told me he even tried J tag..
His conclusion was that the motherboard is broken.
But I don't believe him because I think if the motherboard is truly broken the PC would not recognize the phone..
What do you guys think?
Sent from my SM-N910W8 using XDA Free mobile app
I dont if you have seen this but check it out its kinda old and for an other phone but you can get a brain storm
http://forum.xda-developers.com/showthread.php?t=1526600
Sent from my SM-N9005 using XDA Free mobile app
o-ellinas said:
I dont if you have seen this but check it out its kinda old and for an other phone but you can get a brain storm
http://forum.xda-developers.com/showthread.php?t=1526600
Sent from my SM-N9005 using XDA Free mobile app
Click to expand...
Click to collapse
I bought a jig from China, it worked on my other phones but did not work on this one. I believe a jig is only used for soft bricks and I believe mine is hard bricked. I'm not sure though. That's why I'm asking for the help of the developers.
Thanks for your help.
Sent from my SM-N910W8 using XDA Free mobile app
did you tried to boot your note without your battery just the cables?
xhamadeex said:
I've sent it to a local repair shop nearby. . Not samsung..
He took the phone for a week and a half. He could not fix it.
He told me he even tried J tag..
His conclusion was that the motherboard is broken.
But I don't believe him because I think if the motherboard is truly broken the PC would not recognize the phone..
What do you guys think?
Sent from my SM-N910W8 using XDA Free mobile app
Click to expand...
Click to collapse
If it's that broken I suggest to take it to Samsung. They won't see any modifications anymore and won't take the time to dig deeper. Just tell em it did shutdown somewhere in standby overdays and never woke up anymore.
emuandco said:
If it's that broken I suggest to take it to Samsung. They won't see any modifications anymore and won't take the time to dig deeper. Just tell em it did shutdown somewhere in standby overdays and never woke up anymore.
Click to expand...
Click to collapse
The problem is that my warranty has expired .. :XD
Sent from my SM-N910W8 using XDA Free mobile app
I understand you're having trouble getting your N9005 to download mode. I was having the same problem.
http://forum.xda-developers.com/galaxy-note-3/help/help-sm-n9005-hard-bricked-sd-partial-t3070743 check my thread, it could be helpful to you.
See the threads I've mentioned on it. Maybe you can get ODIN to recognize your phone. But probably that won't be enough, at least it wasn't for me. You can give it a try though...
Skactus said:
I understand you're having trouble getting your N9005 to download mode. I was having the same problem.
http://forum.xda-developers.com/galaxy-note-3/help/help-sm-n9005-hard-bricked-sd-partial-t3070743 check my thread, it could be helpful to you.
See the threads I've mentioned on it. Maybe you can get ODIN to recognize your phone. But probably that won't be enough, at least it wasn't for me. You can give it a try though...
Click to expand...
Click to collapse
I will try it.. Thank you
Sent from my SM-N910W8 using XDA Free mobile app
Get the .PIT file. This file is a saving grace
speedyjay said:
Get the .PIT file. This file is a saving grace
Click to expand...
Click to collapse
The problem is which file should I choose
I tried some files before but did not work
I have n900w8
Anyway.. I have final exams now.. I will try all of the files as soon as I finish..
I'm glad to see more suggestions. .
Thank you
Sent from my SM-N910W8 using XDA Free mobile app
speedyjay said:
Get the .PIT file. This file is a saving grace
Click to expand...
Click to collapse
PIT file is a saving grace if it works. I've tried 6 different ones so far and none of them worked. Any other suggestion?
I accidentally messed around with my build.prop and mistyped something causing my phone to brick. So the problem atm is I can't even use my phone with messages popping up such as "Unfortunately the process com.android.systemui has stopped working" and "Unfortunately the process Home has stopped working." I tried to factory resetting which didn't work at all. Right now I am trying to fix it through flash but I can't since when I plug my USB into my computer, I can't changed my USB settings to MTP and since the messages shown above keeps popping up preventing me from clicking anything on my screen. Any help would be appreciated!
You "accidentally messed arround with the build.prop"???
Can you access TWRP recovery?
You do know that you can transfer files over it?
Sent from my LG-D802 using XDA Forums Pro.
The Marionette said:
You "accidentally messed arround with the build.prop"???
Can you access TWRP recovery?
You do know that you can transfer files over it?
Sent from my LG-D802 using XDA Forums Pro.
Click to expand...
Click to collapse
Oops stated that wrong. Guess I was in a hurry trying to fix my phone but no it was not an accident. And sorry, not too good at this stuff but what is TWRP recovery?
TPFN said:
Oops stated that wrong. Guess I was in a hurry trying to fix my phone but no it was not an accident. And sorry, not too good at this stuff but what is TWRP recovery?
Click to expand...
Click to collapse
.___.
It is a modernised recovery menu,with easier,touch controls.
Basically a MUST when flashing roms.
I guess you dont have that...
Now the only thing you can do is flash the stock rom again with the kdz or tot method.
DO NOT TRY RESTORING IT WITH LG PC SUITE!
It will brick your device,because it had been rooted(LG made that on purpose-"kill dem rooted phones")
Sent from my LG-D802 using XDA Forums Pro.
The Marionette said:
.___.
It is a modernised recovery menu,with easier,touch controls.
Basically a MUST when flashing roms.
I guess you dont have that...
Now the only thing you can do is flash the stock rom again with the kdz or tot method.
DO NOT TRY RESTORING IT WITH LG PC SUITE!
It will brick your device,because it had been rooted(LG made that on purpose-"kill dem rooted phones")
Sent from my LG-D802 using XDA Forums Pro.
Click to expand...
Click to collapse
I stated above in the post that I had already tried flashing but it says my phone was not plugged into the pc. I can't change to option of the USB to MTP which then my computer can't recognize.
TPFN said:
I stated above in the post that I had already tried flashing but it says my phone was not plugged into the pc. I can't change to option of the USB to MTP which then my computer can't recognize.
Click to expand...
Click to collapse
With the LG PC Suite,LG Flash Tool or the TOT method?
They react differently.
And if your phone won't ,you either have no drivers,or have bad ones.
Try on another PC also,but be sure to have drivers installed.
Connect the device inDOWNLOAD MODE
Sent from my LG-D802 using XDA Forums Pro.
The Marionette said:
With the LG PC Suite,LG Flash Tool or the TOT method?
They react differently.
And if your phone won't ,you either have no drivers,or have bad ones.
Try on another PC also,but be sure to have drivers installed.
Connect the device inDOWNLOAD MODE
Sent from my LG-D802 using XDA Forums Pro.
Click to expand...
Click to collapse
I used the LG Flash Tool. I downloaded the driver I believe called the LG United something, don't exactly remember the name.
I tried on 2 PCs already with the same result unable to recognize my phone even though I hear the sound when I plug it in.
And how do I connect it through download mode? Jk I found out how. I'll see what happens next.
TPFN said:
I used the LG Flash Tool. I downloaded the driver I believe called the LG United something, don't exactly remember the name.
I tried on 2 PCs already with the same result unable to recognize my phone even though I hear the sound when I plug it in.
And how do I connect it through download mode?
Click to expand...
Click to collapse
Meh,sounds like your Download Mode
is also broken.
Does anything happen when you turn your g2 completely off and connect it to the PC?
Sent from my LG-D802 using XDA Forums Pro.
EDIT
Also,make a screenshot with the Snipping Tool of the Device Manager when your G2 is connected
The Marionette said:
Meh,sounds like your Download Mode
is also broken.
Does anything happen when you turn your g2 completely off and connect it to the PC?
Sent from my LG-D802 using XDA Forums Pro.
Click to expand...
Click to collapse
Well I got the Download mode to work, but I'm not exactly sure if it's working since its stuck on 0%.
And no nothing happens.
TPFN said:
Well I got the Download mode to work, but I'm not exactly sure if it's working since its stuck on 0%.
And no nothing happens.
Click to expand...
Click to collapse
If you aren't flashing anything,it will show 0%. xD
http://forum.xda-developers.com/showthread.php?p=45293512
This is the guide for both KDZ and TOT methods.
I also had a simmilar issue,but my flashes with KDZ would always stop at 2%.
So I went with the TOT method and it worked.
Sent from my LG-D802 using XDA Forums Pro.
The Marionette said:
If you aren't flashing anything,it will show 0%. xD
http://forum.xda-developers.com/showthread.php?p=45293512
This is the guide for both KDZ and TOT methods.
I also had a simmilar issue,but my flashes with KDZ would always stop at 2%.
So I went with the TOT method and it worked.
Sent from my LG-D802 using XDA Forums Pro.
Click to expand...
Click to collapse
I'll try the TOT one out. But quick question I have a sprint LG G2 and there are like 3 different zip files and idk which one my exact model is...
And thanks a lot for helping me through this, this is the first time this happened to me and i'm just in a mess right now...
TPFN said:
I'll try the TOT one out. But quick question I have a sprint LG G2 and there are like 3 different zip files and idk which one my exact model is...
And thanks a lot for helping me through this, this is the first time this happened to me and i'm just in a mess right now...
Click to expand...
Click to collapse
The box your phone came in has the model number(if you cant recognise the model number,take pictures of all sides of the box,and I will tell you(do hide/cover the IMEI number))
Sent from my LG-D802 using XDA Forums Pro.
The Marionette said:
The box your phone came in has the model number(if you cant recognise the model number,take pictures of all sides of the box,and I will tell you(do hide/cover the IMEI number))
Sent from my LG-D802 using XDA Forums Pro.
Click to expand...
Click to collapse
I currently don't have a device for taking a photo but I found the box and I believe this is the model #: LGLS980WTK
But comparing it to the 4 downloads, I can't seem to find it... any help?
The 4 Downloads are: LS980ZV8_13.zip, LS980ZVA_01.zip, LS980ZVC_12.zip, LS980ZVE_03.zip
The Marionette said:
The box your phone came in has the model number(if you cant recognise the model number,take pictures of all sides of the box,and I will tell you(do hide/cover the IMEI number))
Sent from my LG-D802 using XDA Forums Pro.
Click to expand...
Click to collapse
Ok I have a problem atm of getting an error when flashing:
Error:CrossDL [SM-G920F] to [LS980]
That was the model I was trying to change to during build.prop, and I'm assuming the flash is assuming my model is the samsung one.
Do you have teamveiwer I might be able to help you out. Otherwise you can get your phone fixed on eBay like I did when I super bricked my phone.
Sent from my LG-D800 using XDA Free mobile app
TPFN said:
I currently don't have a device for taking a photo but I found the box and I believe this is the model #: LGLS980WTK
But comparing it to the 4 downloads, I can't seem to find it... any help?
The 4 Downloads are: LS980ZV8_13.zip, LS980ZVA_01.zip, LS980ZVC_12.zip, LS980ZVE_03.zip
Click to expand...
Click to collapse
Erm...
Did you ask for guidance at the thread I provided?
The OP is good at helping when details are troublesome.
Sent from my LG-D802 using XDA Forums Pro.
xmayhemreturnsx said:
Do you have teamveiwer I might be able to help you out. Otherwise you can get your phone fixed on eBay like I did when I super bricked my phone.
Sent from my LG-D800 using XDA Free mobile app
Click to expand...
Click to collapse
I have teamviewer. Mind if i do it tmr?
No problem
Sent from my LG-D800 using XDA Free mobile app
The Marionette said:
Erm...
Did you ask for guidance at the thread I provided?
The OP is good at helping when details are troublesome.
Sent from my LG-D802 using XDA Forums Pro.
Click to expand...
Click to collapse
I found out which model I had but I have a new problem now in a newer reply I posted.
"Ok I have a problem atm of getting an error when flashing:
Error:CrossDL [SM-G920F] to [LS980]
That was the model I was trying to change to during build.prop, and I'm assuming the flash is assuming my model is the samsung one."
Just wondering if you know what is going on then ill ask in the thread.
TPFN said:
I found out which model I had but I have a new problem now in a newer reply I posted.
"Ok I have a problem atm of getting an error when flashing:
Error:CrossDL [SM-G920F] to [LS980]
That was the model I was trying to change to during build.prop, and I'm assuming the flash is assuming my model is the samsung one."
Just wondering if you know what is going on then ill ask in the thread.
Click to expand...
Click to collapse
I suggest you ask in that thread.
I probably could help you if you had an international d802 variant.
Other variants(especially operator-modified ones) are not familiar to me.
Sent from my LG-D802 using XDA Forums Pro.