I have a problem with Windows 8.1 and the phone (sm-n910c). No shows him as removable disk, but if I put it in download odin detects no problems ?. So the phone usb port is not the problem. and reinstall the drivers, and Device Manager does not show it as "galaxy note 4", just as mtp device. computer at one point says, "the host process that hosts this device stopped working, Error 10 ....
Related
Hi ,the problem is that when i connect the tab to the PC usb port(1.1 and 2.0),it does nothing.i have installed the mtp usb drivers and kies,sometimes the tablet is recognized under windows explorer as "portable device",but it's random and it's not predictable,it can be detected by windows 7 even after 30min or 1 hour.The tab is clockwork modded,actually i have flashed the latest stock rom honeycomb 3.2 build P7500XWKK4.I made a screenshot of the device manager when the tab was detected last time.I tried Debug USB enable/disable,doesn't work.Why this strange behaviour?
I also run x64 and do not experience any problems. You should try testing on a different computer to rule out any problems with the device.
I see,so i tried to connect the GT to my win7 notebook and also to my pc with a clean installation of win7 64 in a separate partition and still no luck.Meanwhile i'm using SwiFTP to transfer files to the device,hope to find a solution,maybe it's a broken/defective cable or 30pin usb port damaged
Yeah, seems like faulty usb port. Should send it back
Mine is Ok too, try to uninstall the Samsung Drivers, and Kies - if you have it installed - then reboot your computer all with the TAB disconnected from your PC.
try to perform a junk clean process for your PC.
Reinstall the Samsung Drivers, and TRY!
Win7 Pro x64 is my setup, working fine.
Don't quickly jump to the conclusion of "Defective USB Port" that's very Unlikely to occur on such pro equipment, me think!
solved
Guys I've changed the suspected faulty cable with a new one,now the TAB is recognised immediatly when plugged in,Odin works perfect now,it was hit'n'miss before.FINALLY!! now i can enjoy my teb(shame on you sammy)
Nice Bet that's a relieve
Yeah 2 weeks gettin' mad,i'm stressed now!i need some fun lol ,see you m8
Hello, I recently rooted and installed recovery on my Note 3. All was going well until I couldn't mount my phone using MTP.
I believe this issue started when I tried to mount my phone in recovery mode, and it installed those drivers.
I now get an error message saying
"Attention! Unable to find software on your PC that can recognise your device. Service pack 3, Windows Media Player, version 10 or higher, for windows XP or Android File Transfer for Mac OS must be installed.
You can download and install PC Kies from (Kies download website) in order to sync data with your device, back up data, and upgrade your device (Windows and Mac OS are supported)."
I've tried everything I could find on google -- uninstalling/reinstalling drivers on device manager, uninstalling/re-installing the Kies program(I've never used Kies before as I never needed it for file transfer ... just installed hoping it would fix), re-rooting and re-installing CWM as well as the custom ROMS..I've deleted the UpperFilters from my registry etc etc, nothing seems to work! It even gets the same error on my laptop now!
The drivers I installed in the recovery mode are:
SAMSUNG Android ADB Interface
USB Mass Storage Device
SAMSUNG File-Stor Gadget USB Device
Same thing happens even after I uninstalled those drivers ... When mounted in recovery, it appears as my CD drive ( F: ) ..
I shouldn't have tried mounting in recovery ):
Hello!
I'd really like to use SideSync 3 from Samsung with my Note 4, because I work on my computer alot and it would be very handy to operate my phone via comp.
I had it set up on my ex personal PC via USB, but I can't get it to work on my ASUS laptop.
Problem: I install SideSync 3 from http://www.samsung.com/us/sidesync/ and after I start the program nothing happens. It's like it freezes on opening and doesn't start. I was looking in the running processes but can't find any clue that is actualy running nor anything. I tried running as admin, tried system compatibility with win 8, 7, xp, dpi changes, admin rights... nothing works.
Any idea?
I'd be really happy if someone helped me out! =)
Sorry this won't help much. But it's working fine on WiFi. 8.1 Windows. Check you have latest version from Samsung on your note
try turning on USB debugging from developer options menu
raveenf said:
try turning on USB debugging from developer options menu
Click to expand...
Click to collapse
tried usb debugging, nothing help because app doesn't start on windows. It's like it hangs..
i tried it on another laptop - lenovo.. same problem...
again:
1. i install sidesync 3.0 from samsung webpage
2. i start it
3. nothing happens
4. i try to run as admin
5. nothing
6. restart
7. notthign
8. run the program
9. nothng
i'm loosing my mind really =(
Anyone with any idea??
As I said... I'm loosing my mind =(
Same problem here on Asus laptop with Windows 8.1
Same problem here.
Any ideas?
hi ,
i noticed that you are trying to get SideSync 3 it to work on Win 8.1 (PC /USB .)
However ,i have Acer laptop Win 8 ( have not updated laptop to Win 8.1 ) SideSync 3 works fine. (No freezes or nothing, smooth, no problems at all )
Note 4 / USB connected .
Maybe you can " read " something into why it works on Win 8, since you " tried system compatibility with win 8" ?
Good luck
I have same problem. I tried on 3 different computers (Win 10, Win 8.1 and Win 7). To my suprise I can't run this app on any computer. It just will not start - at least it seams so. I also tried different compability modes and run it as administrator, but no success (it's same experience as miHah).
This is not a problem of phone (I use S6 Edge) - the phone is recognized when connected by USB (and I can browse/edit content on phone from pc). It just wont work with SideSync. BTW: I tried with SideSync version 3 and 4. Same results - doesnt run.
I have similar problem. I am unable to install samsung sidesync because it freezes my Windows 10 pc while installing samsung usb drivers for mobile devices. I am also unable to uninstall samsung usb drivers. Everytime I forced to reset my pc. Any ideas?
I have same issues and very confused
Admin rights requested on startup
At any time when I reboot, as Sidesync is started during boot sequence, when I login in, the Admin rights autorisation opened as I am not admin by default.
Any clue or advice for this ?
Thanks
jp
Same here
Do you guys also have keis 3 installed? I was able to start sidesync. I hadn't had any devices linked yet but I installed keis 3 and now it is doing the same (not even starting). I noticed when I downloaded sidesync from the Samsung website, it notified me I needed to update keis 3 and uninstalled it when I accepted the update. I wonder if it has something to do with both programs being installed or if you also need sidesync source on the computer as well. BTW I'm running acer win 7.
I used my PC to help restore my daughters Asus ZenPhone 5. This phone uses an Intel chip so I had to install the Intel USB/ADB drivers in order to access the phone to do data backup before I reset it. Now, I plug my Samsung Note 3 back into my PC and it isn't being recognized. So far, I've uninstalled the Intel drivers, reinstalled the Samsung USB drivers and in Windows Device Manager, I've gone to the Samsung ADB and let it find the best driver. Now my phone will show up but I can't see the internal / SD card memory. How do I restore that? Any help would be greatly appreciated!
Is it a windows PC? If so, you can try to revert it back to the day before you installed the intel drivers. See if that helps
Or, You try to connect a locked device?
Try to install samsung kies for updated drivers.
Windows 8.1 has the samsung drivers in windows update.
I'm trying to install Samsung mobile phone drivers but no matter what I do I miss these drivers when I connect my Samsung Galaxy Y:
CDC Abstract Control Model (ACM)
CDC ACM Data
CDC OBEX Data
CDC Object Exchange (OBEX)
I have googled for solution and I have followed recommended actions (install Kies, install latest drivers, reinstall all, use "have disk" method) on different operating systems (Windows XP, Windows 7) but I got no success.
My phone doesn't boot (I need to flash it with Odin) so I have tried it all in recovery or download mode but I understand it should not really matter as it's Windows issue, not a phone. I'm using original Samsung USB cable.
Could somebody with a working setup could check if they have above devices correctly installed and provide me more information on the driver file? I mean the information from driver details tab in Windows, ie. name of *.SYS file, *.INF file so I could at least check if I have a driver on a disk.
Any other suggestions also welcomed!
Kies is useless & is not required for galaxy y gt-s5360 as it's not supported for firmware flashing on this device so uninstall it
Uninstall any Samsung drivers you have installed from add/remove programmes
Goto my firmware thread at top of Dev section or link in signature
Download & install USB drivers on my thread
Download the firmware from my thread depending on region
Follow the instructions fully
You can manually install drivers if you wish by clicking on unknown device/device with yellow! click have disk & navigate to where you installed Samsung drivers eg c:/programme files/Samsung
It has finally worked (Windows XP)! I have just installed drivers and followed your instructions (with download mode, not recovery mode). Initially I had other unrecognized devices (very generic usb ones) but after a few attempts (usb plug out, usb plug in) the phone has been detected successfully and I managed to flash it. Many thanks!
Sorry, I forgot to mention. I had also removed a battery.
I have the same issue, Could you please paste the links for downloading the drivers.