I flash 4 files 4.4 for note 4. 1 day work fine and after t
Restart stuck on logo. I try after that flash many roms. And I can't go in recovery mode.... Just work download mode.. I'm sad. I think I brick my note 4.... N910f please help guys . I will post video on YouTube you can check
xLuciferSx said:
I flash 4 files 4.4 for note 4. 1 day work fine and after t
Restart stuck on logo. I try after that flash many roms. And I can't go in recovery mode.... Just work download mode.. I'm sad. I think I brick my note 4.... N910f please help guys . I will post video on YouTube you can check
Click to expand...
Click to collapse
if download mode work then just flash a different rom from sammobile.
robocik said:
if download mode work then just flash a different rom from sammobile.
Click to expand...
Click to collapse
I tried. But same problem...... Again stuck..
Reboot and 2 times vibrate and again same .. Note 4 stuck on logo...: http://youtu.be/0_ES8V4YTdc
xLuciferSx said:
Reboot and 2 times vibrate and again same .. Note 4 stuck on logo...: http://youtu.be/0_ES8V4YTdc
Click to expand...
Click to collapse
remove the battery, reinsert it, go into download mode, flash a sammobile rom with odin.
if one rom does not work, download a different, may be older and redo the procedure above.
repeat until success...
had the same issue with note3, tried 4 different roms before it booted... then i could flash everything as normal again.
I tried maybe 6 roms. But again turning on stuck on logo testart and 2 times vibrate turning on stuck and restArt....
I tried to install stock uk ee firmware. But still sAme problem ... I don't know what do now....
xLuciferSx said:
I tried to install stock uk ee firmware. But still sAme problem ... I don't know what do now....
Click to expand...
Click to collapse
did you tried just to flash a custom recovery?
xLuciferSx said:
I tried to install stock uk ee firmware. But still sAme problem ... I don't know what do now....
Click to expand...
Click to collapse
I'd say take it to Samsung and if it is still in the "instant replacement period" which is usually the first month they should replace it without any issues. In Australia we're lucky, if we have knox warranty 0x1 they still have to replace/refund the device as they have to abide the consumer laws. If you are rooted or voided your knox warranty it wouldn't hurt to go and ask them for a repair/replacement and don't tell them that you have rooted/voided warranty. :good:
I have rooted
robocik said:
did you tried just to flash a custom recovery?
Click to expand...
Click to collapse
I tried twrp but still some stuck on logo... I tried recovery mode but stuck on logo
Have you tried lollipop?
Many times.... Still nothing...
xLuciferSx said:
Many times.... Still nothing...
Click to expand...
Click to collapse
did you tried if KIES is seeing the phone? use original cable.
robocik said:
did you tried if KIES is seeing the phone? use original cable.
Click to expand...
Click to collapse
Kies not see my phone..
xLuciferSx said:
Kies not see my phone..
Click to expand...
Click to collapse
you tried kies and download mode?
Yes .... Not see my phone
I tried different computers. Different cables
Can you help me guys ?
xLuciferSx said:
I flash 4 files 4.4 for note 4. 1 day work fine and after t
Restart stuck on logo. I try after that flash many roms. And I can't go in recovery mode.... Just work download mode.. I'm sad. I think I brick my note 4.... N910f please help guys . I will post video on YouTube you can check
Click to expand...
Click to collapse
check out this link. follow the instructions and your phone should work.
http://www.sammobile.com/firmwares/download/43168/N910FXXU1BOB4_N910FOXA1BOB4_DBT/
Instructions:
Extract (unzip) the firmware file
Download Odin v3.10.6
Extract Odin ZIP file
Open Odin v.3.10.6
Reboot Phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until you get a blue sign in Odin
Add the firmware file to AP / PDA
Make sure re-partition is NOT ticked
Click the start button, sit back and wait few minutes
Related
I've made a HUGE mistake... I wanted to flash Abysskernel over RocketRom V4 to make a full wipe. But I've done it to fast, without looking good at what I was doing.
I've flashed CYANOGENMOD 9... And flashing has stuck. Now, I can't start my phone. No more recovery, no more download mode !!!
I think I'm screwed.
Is there a little chance to repear it without SAV ?
Thank you.
you flashed CM9 on ICS Rom...
you are screwed... the CM9 instructions clearly state to flash from GB rooted or other safe kernel
Try usb jig
Sent from my GT-N7000 using xda premium
musashiro said:
you flashed CM9 on ICS Rom...
you are screwed... the CM9 instructions clearly state to flash from GB rooted or other safe kernel
Click to expand...
Click to collapse
I know... it was a mistake, I've selected zip file too fast...It wasn't the good one :'(
zepretender said:
I know... it was a mistake, I've selected zip file too fast...It wasn't the good one :'(
Click to expand...
Click to collapse
Pull the battery, wait 30 seconds and put it back in and try to get in downloadmode.
gee2012 said:
Pull the battery, wait 30 seconds and put it back in and try to get in downloadmode.
Click to expand...
Click to collapse
No download mode... Nothing. Full black screen.
Just pull the battery wait for 10 to 15 seconds put it in volume down+home+power button for 10 seconds and again count of 10 just plug in ur usb cable and see wether the phone is detected through odin if yes and then use 16gb pit file with bootloaders and flash any stock gb rom
bhasg1007 said:
Just pull the battery wait for 10 to 15 seconds put it in volume down+home+power button for 10 seconds and again count of 10 just plug in ur usb cable and see wether the phone is detected through odin if yes and then use 16gb pit file with bootloaders and flash any stock gb rom
Click to expand...
Click to collapse
What is "16gb pit file" ??
if its totally black and you cant turn it on, you are lucky if you still have the warranty.. they cant check the flash counter...
just tell them you suddenly cant open the phone
Here's a guide. I actually used this to fix my Note and it worked.
http://www.android.gs/easily-fix-bricked-samsung-galaxy-note-n7000/
alexdumitru said:
Here's a guide. I actually used this to fix my Note and it worked.
http://www.android.gs/easily-fix-bricked-samsung-galaxy-note-n7000/
Click to expand...
Click to collapse
I can't reach Download Mode :'(
Totally black screen.
I hope that musashiro is right.
hi
i have got the same problem.
alexdumitru your problem is not same. the link you shared they mention to solve softbrick devices. but me and zepretender got a hardbrick devices. it means you can not go to download mode. so i think only they solve it with changing mainboard or damaged parts.
is there any other new ways for solve hard brick devices??
That's a hard brick too. The emmc is damaged, though it enters download mode, it's true. But I've seen cases where the device entered download mode, though the screen remained blank. So try to enter download mode, even if the screen is still blank and then connect it to the computer. If Odin recognizes it, you might be lucky.
i´ve sufferd the same problem. i´ve bricked my note - no recovery, no download mode. i tried to go to download mode, but odin didn´t recognized usb connection. My phone was dead. I´ve sent my device to samsung for warranty repair.
Hmm I didn't know that.actually I hv tried everythng but odin didn't recgnse it. I will try your suggest ofcourse.its worth to try. So whle usb cble connected should I try to go to download mode? In some topics they mentioning about use another usb cable.which is dfferent than normal ones. Do u know anythng about it?
Jig usb can open my phone in download mode? Is that works for hardbricked phones? Because Im gonna buy one.
quarkw said:
Jig usb can open my phone in download mode? Is that works for hardbricked phones? Because Im gonna buy one.
Click to expand...
Click to collapse
If your phone is "superbricked" hard brick, then a JIG won't work because it damages the eMMc chip. But, you can make your own JIG. You can get stuff at your local electronics store, like Radioshack. I don't know where you live though, haha!
Even if the JIG gets you in download mode though, if Odin fails at factoryfs.img or NAND write start then it will still be bricked.
I have recently purchased a new PC, installed all drivers and now can't flash anything (custom recovery or official firmware)
Any ideas what has gone wrong?
I will attach 2 pictures. 1 showing the first error (no pit partition) and the 2nd with the pit still not working.
Please help
Is your phone in DOWNLOAD MODE? What version of ODIN u used?
Joku1981 said:
Is your phone in DOWNLOAD MODE? What version of ODIN u used?
Click to expand...
Click to collapse
Yes I'm in download mode. Using Odin 3.09.
CyberTbag said:
Yes I'm in download mode. Using Odin 3.09.
Click to expand...
Click to collapse
try a different cable/port
Repulsa said:
try a different cable/port
Click to expand...
Click to collapse
Only have 1 cable and I've tried all the USB ports
I had the error in your 1st pic, and like Repulsa says....the unused cable from my tab3 made it work.
Is there any connecting/disconnecting beeps grom pc if you move the cable up and down a touch?.
theunderling said:
I had the error in your 1st pic, and like Repulsa says....the unused cable from my tab3 made it work.
Click to expand...
Click to collapse
Guess I'm gonna have to find a new cable :/
Oh well, cheers anyway
CyberTbag said:
Only have 1 cable and I've tried all the USB ports
Click to expand...
Click to collapse
After checking your screenshot , why do you flash the kitkat 4.4.2 with a pitfile on it?and untick Repartion.. Flash only the FNB8.Home.tar mate . I encounter this issue once and the fix was changing the Port
Repulsa said:
After checking your screenshot , why do you flash the kitkat 4.4.2 with a pitfile on it?and untick Repartion.. Flash only the FNB8.Home.tar mate . I encounter this issue once and the fix was changing the Port
Click to expand...
Click to collapse
Just had the same "no pit partition" error
Are entering recovery from total shutdown and pressing buttons or using the restart to download mode?
I had similar problem and turns out odin flashing don't work when you use restart to download mode.
New Folder said:
Are entering recovery from total shutdown and pressing buttons or using the restart to download mode?
I had similar problem and turns out odin flashing don't work when you use restart to download mode.
Click to expand...
Click to collapse
I don't have an option to restart to download mode. I'm using stock firmware.
I can confirm today that it was indeed my USB cable. I have borrowed my friends cable and it works just fine.
Cheers for all the help guys
Hello
I have F version, country Italy
I tried install a few roms but I always had freeze screen and reboots. So finally tried restore from Odin and I had brick. I used the last firmware from Odin and one from this forum of "Fast download" And this only shows the bootimage and reboot again of freeze
In download mode shows in System: "custom", Recovery: Samsung Oficial
I cant enter on recovery mode
Im not sure if Samsung I still give me "warranty"
Anybody can help me ?
PD: sorry4myenglish
best bet is to try and flash another ROM if you can get into download mode still (making sure that you flash a ROM for the right version of your phone).
Samsung probably wont honor warranty as you tripped KNOX when flashing in the first place (that voids your warranty and I belive download mode states this)
EDIT:
the right version for you is the first link on the thread: http://forum.xda-developers.com/s6-...icial-stock-roms-firmware-aoj5-g928f-t3231589
as long as you have the SMG928F version from Italy
Natherul said:
best bet is to try and flash another ROM if you can get into download mode still (making sure that you flash a ROM for the right version of your phone).
Samsung probably wont honor warranty as you tripped KNOX when flashing in the first place (that voids your warranty and I belive download mode states this)
EDIT:
the right version for you is the first link on the thread: http://forum.xda-developers.com/s6-...icial-stock-roms-firmware-aoj5-g928f-t3231589
as long as you have the SMG928F version from Italy
Click to expand...
Click to collapse
Exactly that firmware made the brick on my phone
Ronalrago said:
Exactly that firmware made the brick on my phone
Click to expand...
Click to collapse
well it might be a corrupt download, but theres no MD5 for the files form that thread to match.
Can you enter download mode? If so then I would probably flash a custom recovery and install custom ROM just to get the phone running again.
Natherul said:
well it might be a corrupt download, but theres no MD5 for the files form that thread to match.
Can you enter download mode? If so then I would probably flash a custom recovery and install custom ROM just to get the phone running again.
Click to expand...
Click to collapse
Yep i can and I tried that, but the phone doesnt enter to recovery mode :crying:
Only can enter to dowloand mode
Ronalrago said:
Yep i can and I tried that, but the phone doesnt enter to recovery mode only:crying:
Only can enter to dowloand mode
Click to expand...
Click to collapse
then flash a new recovery from download mode and ODIN.
one example of a recovery can be founds in the instructions of
http://forum.xda-developers.com/s6-edge-plus/development/rom-audax-plus-v1-0-t3219017
EDIT:
or check
http://forum.xda-developers.com/s6-...-to-rooting-flashing-custom-recovery-t3200324
for custom recovery
Natherul said:
then flash a new recovery from download mode and ODIN.
one example of a recovery can be founds in the instructions of
http://forum.xda-developers.com/s6-edge-plus/development/rom-audax-plus-v1-0-t3219017
EDIT:
or check
http://forum.xda-developers.com/s6-...-to-rooting-flashing-custom-recovery-t3200324
for custom recovery
Click to expand...
Click to collapse
I just tried enter but only shows the message "recovery mode is senandroid enforcing" then shows (after 1 min maybe) the screen like a tv without signal
Some days ago I had exactly the same problem as you. You need to download "Smart Switch" on PC (something like samsung kies) and then recovery your phone through it. This samsung app will download a new system and completly repair your phone, after that if you want to install audax rom or something else you MUST go to developer options and enable USB DEBUGGING and OEM UNLOCK or you will have the same problem after rebooting phone.
Hope it helps, I bricked my phone for 1 day and managed to repair it with it. ODIN and all other stuff didn't worked.
DavidB93 said:
Some days ago I had exactly the same problem as you. You need to download "Smart Switch" on PC (something like samsung kies) and then recovery your phone through it. This samsung app will download a new system and completly repair your phone, after that if you want to install audax rom or something else you MUST go to developer options and enable USB DEBUGGING and OEM UNLOCK or you will have the same problem after rebooting phone.
Hope it helps, I bricked my phone for 1 day and managed to repair it with it. ODIN and all other stuff didn't worked.
Click to expand...
Click to collapse
Nice, I did not know that SmartSwitch for PC had build in recovery tools, but that is good to know.
Ronalrago said:
I just tried enter but only shows the message "recovery mode is senandroid enforcing" then shows (after 1 min maybe) the screen like a tv without signal
Click to expand...
Click to collapse
That message means that SElinux is enforced and the way around that is a custom kernel as the stock on is forcing it always.
Natherul after I bricked my phone by installing audax and the unchecking in dev options "oem unlock" Smart Switch was the only one thing that actually unbricked my phone :good:
DavidB93 said:
Some days ago I had exactly the same problem as you. You need to download "Smart Switch" on PC (something like samsung kies) and then recovery your phone through it. This samsung app will download a new system and completly repair your phone, after that if you want to install audax rom or something else you MUST go to developer options and enable USB DEBUGGING and OEM UNLOCK or you will have the same problem after rebooting phone.
Hope it helps, I bricked my phone for 1 day and managed to repair it with it. ODIN and all other stuff didn't worked.
Click to expand...
Click to collapse
I tried with this too. But says that doesnt support this model... Do u put in dowloand mode ? or how?
Ronalrago said:
I tried with this too. But says that doesnt support this model... Do u put in dowloand mode ? or how?
Click to expand...
Click to collapse
https://www.youtube.com/watch?v=y8AZyalTf5Y#t=109
DavidB93 said:
https://www.youtube.com/watch?v=y8AZyalTf5Y#t=109
Click to expand...
Click to collapse
ok thanks I used and works but still have reboots and doesnt recognize the touch :crying::crying:
The download mode now says System: Oficial
Maybe try once again ?
DavidB93 said:
Maybe try once again ?
Click to expand...
Click to collapse
I did again. Also tried with odin and nothing
:crying::crying:
i have tried to install new 4.4.2 rom using odin but an error appear on the odin and the phone freeze, i restart my phone but its dead now , ihave tried many ways to turn it on but no way please help me .
abedkadid said:
i have tried to install new 4.4.2 rom using odin but an error appear on the odin and the phone freeze, i restart my phone but its dead now , ihave tried many ways to turn it on but no way please help me .
Click to expand...
Click to collapse
even download mode dont work?
NYT_RootComm said:
even download mode dont work?
Click to expand...
Click to collapse
yes even download mode not work and the not charging
abedkadid said:
yes even download mode not work and the not charging
Click to expand...
Click to collapse
its hardbbricked bro
abedkadid said:
i have tried to install new 4.4.2 rom using odin but an error appear on the odin and the phone freeze, i restart my phone but its dead now , ihave tried many ways to turn it on but no way please help me .
Click to expand...
Click to collapse
Get yourself a USB JIG if you can't afford a new mobo.
Although I have (thanks God the gracious) never bricked my Grand 2, rumor has it that a JIG repair has been done before (by @aapav01 on his Grand 2).
it's the same situation, I try on samsung service center but they said the problem on the motherboard,
I have SM-N910V and my notification lights work and it takes a charge, but my display is black ( no there are no cracks) and I have tried the battery drain method 1,2,3 minutes several times with no luck..... any1 have any other solutions,, I have exhausted all the searches I could think of..
Thank you in advance for any ideas/help
Can you boot in to download mode or recovery
Yes ,, just can't see anything...
So how do you know if you can boot in to download mode if you can't see anything?
Try to flash new stock rom with pit file.
Like you would like to unbrick it
a602820922 said:
So how do you know if you can boot in to download mode if you can't see anything?
Try to flash new stock rom with pit file.
Like you would like to unbrick it
Click to expand...
Click to collapse
Odin says it is connected,, when attempting to put it in download mode.. and I will try that ,, not my phone so I was trying not to erase everything,, but it might just be the best way to fix
So if you turn it on does it make any sound, or something?
When it's ON and you plug it in to pc can you see it there?
Ok I have tried Odin and the phone is recognized on computer,, but no luck with fixing the display,,,,, I think the display (board) is cracked ...oh well
I am still rocking mine on star's Apocalyps Rom ....