Hi I need help please I can tell I can not flash my n910f. does not allow me to root or firmware recovery or a single file.
I need help
Download stock firmware for your phone from sammobile.com and flash it using odin
Related
I accidentally flash custom recovery(cwm) without backup stock recovery first..can anyone help me for upload stock recovery file.
I'm using l9300l dual sim card
You must flash the stock firmware via Odin. You can find the firmware here or if you're not sure what you're doing there's a quick guide on the firmware download page where everything you have to do is written step by step, you can leave me a PM if you have problems anyways.
Hi,
I wanted to Root my S5, so i followed a tut with odin. Flashing did go wrong (failed in Odin) and now when i boot the device it says "Firmware update failed. Please use recovery in KIES".
Kies does not want to recover the device, for whatever reason. How can i get my phone back to a working state?
Grab a stock firmware (ROM) from sammobile, use ODIN to flash it
Need to create a free account on SM to download ROMs
*Detection* said:
Grab a stock firmware (ROM) from sammobile, use ODIN to flash it
Need to create a free account on SM to download ROMs
Click to expand...
Click to collapse
Isn't working Fails at the WRITE part for the system.img.ext4
Hey guys,
I installed xtrestolite on my G900F and changed the bootloader and modem of my device before installing it. First problem i had was with CSC. It is a single CSC and i couldn't install my countries CSC on it. That's why i went back to stock. I installed Kit Kat firmware that i downloaded from sammobile and then changed CSC to my countries CSC. Then i updated firmware to lollipop using Kies3. But installing stock rom didn't change bootloader version or modem version. Now i have kitkat bootloader version, kitkat baseband version and lollipop firmware version all different and i want to them all to be the same(latest lollipop). Is there any way to do this without downloading stock rom from sammobile again ? And if not, then can i just put the tar.md5 file that i will download from sammobile in bootloader, pda and CP at the same time and install with odin ?
Thanks in advance !
You do not need to re-download or re-install your ROM. You need to download your bootloader and radio from somewhere, then flash those with ODIN.
Just an FYI, the modem doesn't always like to stick so you may need to flash (auto-reboot disabled), pull the battery after odin says "success", then flash again immediately.
Sean89us said:
You do not need to re-download or re-install your ROM. You need to download your bootloader and radio from somewhere, then flash those with ODIN.
Just an FYI, the modem doesn't always like to stick so you may need to flash (auto-reboot disabled), pull the battery after odin says "success", then flash again immediately.
Click to expand...
Click to collapse
Hey thanks for the tip ! I just downloaded stock firmware but i don't know how to extract bootloader and modem from tar.md5 file and then make them odin flashable. I uploaded image with all the files that are in my tar.md5 file. What of these are for bootloader and what for modem and how do i make them odin flashable later ?
Thanks in advance
Hi
I have a note3 n9005 with Phronesis 5.1.1 rom installed .
I want to install latest DArkMod kernel /bootloader and modem, someone on xda gived these files to install https://idlekernel.com/flash-tools/firmware/hlte_SM-N9005XX/N9005XXUGPOK2/
I flashed these three files at the sametime using ODIN
AP_N9005XXUGPOK2_KERNEL.tar.md5
BL_N9005XXUGPOK2_BOOTLOADER.tar.md5
CP_N9005XXUGPOK2_MODEM.tar.md5
but now, phone is unable to boot , can only access to DOWNLOAD MODE and RECOVERY MODE .
how to fix it and where to find latest files ??
PS: kernel in flashable via ODIN or RECOVERY
thx
Flash stock 5.0 with odin and the rest....
is this the only solution ???
and what was the problem ? wrong files ??
Can someone tell me a safe way to make a firmware package?
The problem is it's for a firmware with no tar. It's for the N910P and I want QA1!
I was gonna flash PK1 then take ota to QA1. Then i was gonna use Flash Fire to backup the boot loader and modem files. To pack into a tar.
Is this a safe way to do this? Yes i know you have to pack it in certain order. My main concern is the proper way to pull the file! Thank you!
You can use SamFirm to download the newest firmware