Note 4 locked because of hard reset:( - Galaxy Note 4 Q&A, Help & Troubleshooting

Ok I tried to be smart and did a hard reset on my Note 4 because i thought this would help me get lolipop update for my phone (stupid i know) , my phone is stuck on samsung account window after rebooting and I am unable to use my note 4 since yesterday. it says
"This device is locked because of an abnormal factory reset...bla bla bla." and it wont let me pass this window, every time when i enter my samsung account details it says "processing failed.
what can i do ? please help

What carrier?

rohit_tripathi60 said:
Ok I tried to be smart and did a hard reset on my Note 4 because i thought this would help me get lolipop update for my phone (stupid i know) , my phone is stuck on samsung account window after rebooting and I am unable to use my note 4 since yesterday. it says
"This device is locked because of an abnormal factory reset...bla bla bla." and it wont let me pass this window, every time when i enter my samsung account details it says "processing failed.
what can i do ? please help
Click to expand...
Click to collapse
hi ,
was your Reactivation lock tick ( if so you have to log into Samsung account)

Related

Unauthorized actions have been detected. Restart your phone

Hello Everybody
I bought today Samsung Galaxy S5
At the notification bar im getting every 5 min noticiation of "Unauthorized actions have been detected. Restart your phone "
(Does it something that can restrict me on using my phone, and how can i disable this notification?)
another thing i just check my software update and when i click on it, Im getting a note of "Registration Faild"
any one can help me and let me understand what happening ?
Thanks Alot.
ANYBODY ?
https://www.samsungknox.com/en/cont...actions-have-been-detected-restart-your-phone
Did you try flashing stock image?
Where did you buy the phone?
Did you restart you phone? :cyclops:
thank
yes of course,
i restart the phone and after 5 min' its popup me again on the notification bar.
i bought my phone in israel- tel aviv
anybody ? please ?
I haven't seen this before so my guess is to try a factory reset our being it back to the store and exchange it.

phone bricked badly galaxy s6 edge plus

hello ,
i rooted my Phone and did a very stupid thing and in settings i turned of oem unlock and usb debugging off again. so now my Phone wont start cause of the message "custom binary(recovery) blocked by frp lock.
i tried something trough odin for the recovery but it failed so now the Phone wont turn off and when i try to go to recovery mode it says "an error has occurred while updating the device software .use the emergency recovery function in the smart switch pc software"
i tried that but the Phone is not compatible with smart switch and with samsung kies 3.
what can i do to unbrick my Phone , is it possible to fix my Phone after this?
regards, marco
been there
use samsung kies the normal edition ...not 3...that is compatible with our phone...emergency recovery and will work...sry 4 my english
streetfighter74 said:
hello ,
i rooted my Phone and did a very stupid thing and in settings i turned of oem unlock and usb debugging off again. so now my Phone wont start cause of the message "custom binary(recovery) blocked by frp lock.
i tried something trough odin for the recovery but it failed so now the Phone wont turn off and when i try to go to recovery mode it says "an error has occurred while updating the device software .use the emergency recovery function in the smart switch pc software"
i tried that but the Phone is not compatible with smart switch and with samsung kies 3.
what can i do to unbrick my Phone , is it possible to fix my Phone after this?
regards, marco
Click to expand...
Click to collapse
Its because you didnt explored smart switch properly ..
I have been there with my phone samsung galaxy j5 ... it happened just like yours ... i rooted my phone, forgot to check oem unlock and got the "custom binary blocked by frp lock" .. then i went to odin and flashed my firmware .. and it turns out .. the firmware i flashed is not the firmware of my phone .. so i got the message "an error occured while updating blah blah please go to smart switch blah blah blah " but i fixed it so theres solution for that ... smart switch
You said smart switch cant read your device?? Its because its bricked theres no way it can be read ..
So all you have to do:
1. Open smart switch
2. Go to "more"
3. Then go to "emergency software recovery and initialization"
5. Then go to "device initialization"
6.Put your model number and then your S/N or serial number .. it is found in the back of your edge plus.. it starts with letter R..
7.. after that .. you wait .. it will download the files for your phone...
That way you wont be flashing ramdom firmwares .. your phones firmware will be flashed since smart switch used the serial number.. i hope this helps..

Samsung account "processing failed" error on Note 4

Please help good fellows,
I had some issues with my Note4 (N-910C) and had to hard reset it, Samsung account is giving (processing failed) while password is correct and logged on my PC. any ideas how to bypass this!!? Ver. 6.0.1

Samsung S5 Neo An error has occurred while...

So I am actually not sure what happened to my phone, at first it did not want to go through the Samsung S5 NEO powered by andriod logo, It said custom binary blocked by frp lock in the top left corner. So I did some research and first I found that using Samsung Kies I could fix it but when I put my sin number in it keeps on saying: "please check the model name and s/n and enter them again". So I did some more research and found out my best bet is just to load a rom on to my phone so I got it into download mode, Power+Home+VolumeDownButton and found my phones andriod 6.0.1, The exact andriod that it currently has, I started the process of it sending it to my phone and then when it was done it rebooted and started saying "An error has occurred while updating the device software. Use the Emeregency recovery function in the Smart Switch PC software. When I put my phones model name and s/n number it again says "please check the model name and s/n and enter them again". I am not sure what to do anymore, I can do nothing with my phone anymore. Is there anyway to get it working again? and hoviously my warranty is voided, but it was exipred by now because I have had the phone for a good 3 years if not longer by now.

Samsung Galaxy A20e - Locked on FRP

Hey!
In the company that I work an ex-collaborator left the Samsung Galaxy A20e he was using professionally. During the time he used it, he probably activated FRP, now we want to unlock the phone to give to another collaborator. I've tried to do factory reset at first when I didn't know about FRP.
Now I'm seeing some tutorials that says that we can remove the FRP lock, but I need USB debugging and I can't access the system to activate it.
Is there something I can do?
Same problem as here:
This device was reset. To continue, sign in with a google account that was previously synced on thos device.
Hello everyone, I got a phone Galaxy A 20 and called Boost mobile to sim unlock the phone, what they did. When done I factory reseted the phone. Now when I try to add an account I got a "your phone was factory reset., type the password to...
forum.xda-developers.com

Categories

Resources