Database Users

To Root and to Tinker--Rooting and Recovery

So, I'm new to the locked bootloader scene. The root & ROM threads, tutorials, and videos seem to root via a Terminal Emulator process, then install Safestrap. Those same sites and videos say that when you're flashing a ROM after selecting a new ROM Slot, you have to flash "whatever modules and packages are for your device", whatever that means. Since I can't find these packages anywhere, is it safe to assume that I can just root, install Safestrap, create a ROM Slot, and start flashing away as if nothing's up? Or do I need to worry about this boot patch and some "Loki Doki" thing I heard about. I'm sure these answers exist, and I've done my due diligence, but these threads have either been buried for good, or are such a common a knowledge subset that I can't find anything concrete. Even the videos I've seen talk about the "modules" you have to flash. I'm an experienced Androidist, tinkerer, and tweaker. The information I'm finding doesn't provide you with the big picture. It's all, "MJ2 read this, and follow these 9 steps", and "mk2 follow these 10 steps". But none of them tell you what to do in Safe strap recovery, and if you needs some Loki/module magic.
Help a brotha out? I'll return the favor 10-fold, I can promise you that much. I'll be quite active around here.
Thanks!
Sent from my Nexus 7 using XDA Premium HD app

First off you never said what baseband you were on but assuming that your on MK2 android 4.3 then let's start.
Use this method to root your device
http://forum.xda-developers.com/showthread.php?t=2569827
Since your on mk2 you can ONLY use safe strap 3.71 do not attempt to install safe strap 3.65 AND SAFE STRAP WILL BE THE ONLY RECOVERY YOU CAN INSTALL!
http://forum.xda-developers.com/showthread.php?t=2448925
And note that 3.71 is still in beta as of right now there are still bugs and YOU CAN ONLY FLASH A COUPLE OF ROMS.
From the same thread cause I know your not going to go through the forums and read, download the attmk2module.zip that ted77usa posted
http://forum.xda-developers.com/showthread.php?t=2448925
Root your device
Install safestrap after install, install recovery in safestrap apk.
There's only a few Roms you can flash
Darthstalker x in the att android development forum
Hyperdrive 12 in the Verizon android development forum download the one that says safestrap
A few have noted that some other Roms work but I haven't tested it out do some more reading.
After you download a rom
Reboot your device and go into safestrap recovery
Create a ROM slot ON ROM SLOT 1
DO NOT MESS WITH YOUR STOCK SLOT!
After creating a ROM slot go to install and install your rom.
After successfully installing a ROM reboot then go back into recovery and install the attmk2module.zip
Reboot and instead of going into recovery this time continue
It will take awhile to load its normal.
Now you should have a ROM.
Now go tinker with that.
AT&T SGH-I337 RUNNING HYPERDRIVE 12

ATTMK2kernelmodules Original Post i don't think u would like to go over 1000 post on that thread..... and at the bottom there is SHOstock_v3.0_Safestrap_Ready link that also confirmed work by several people.......hope this help u to get start it..... .
Bootloader:................Use:...................Custom Rom:
MDL/MDB.......................LOKI.....................4.2.2......4.3.....4.4 ALL WORK (....LUCKY U....)
MF3................................SS-v3.65................ONLY FLASH 4.2.2 ROM (Slot1,Slot2 and Stock ALL WORK)
MK2................................SS-v3.71................SOME 4.3 ROM WORK (Slot1,Slot2 and Stock ALL WORK (confirmed))

[email protected] said:
First off you never said what baseband you were on but assuming that your on MK2 android 4.3 then let's start.
Use this method to root your device
http://forum.xda-developers.com/showthread.php?t=2569827
Since your on mk2 you can ONLY use safe strap 3.71 do not attempt to install safe strap 3.65 AND SAFE STRAP WILL BE THE ONLY RECOVERY YOU CAN INSTALL!
http://forum.xda-developers.com/showthread.php?t=2448925
And note that 3.71 is still in beta as of right now there are still bugs and YOU CAN ONLY FLASH A COUPLE OF ROMS.
From the same thread cause I know your not going to go through the forums and read, download the attmk2module.zip that ted77usa posted
http://forum.xda-developers.com/showthread.php?t=2448925
Root your device
Install safestrap after install, install recovery in safestrap apk.
There's only a few Roms you can flash
Darthstalker x in the att android development forum
Hyperdrive 12 in the Verizon android development forum download the one that says safestrap
A few have noted that some other Roms work but I haven't tested it out do some more reading.
After you download a rom
Reboot your device and go into safestrap recovery
Create a ROM slot ON ROM SLOT 1
DO NOT MESS WITH YOUR STOCK SLOT!
After creating a ROM slot go to install and install your rom.
After successfully installing a ROM reboot then go back into recovery and install the attmk2module.zip
Reboot and instead of going into recovery this time continue
It will take awhile to load its normal.
Now you should have a ROM.
Now go tinker with that.
AT&T SGH-I337 RUNNING HYPERDRIVE 12
Click to expand...
Click to collapse
You're perfect in every way. ? Bromance FTW
You even answer threads like me. This helped a TON! I owe ya one.
Edit: last question. The instructions say to install the ROM, reboot, then install the modules. I assume that the reboot instruction means that we should reboot, boot into the ROM for the first time, then boot back into recovery and install the modules?
Or should I flash the ROM, power down, then boot into recovery (ensuring that the ROM is never booted before the modules are installed)-- I suppose I could just use the reboot recovery option in the Safestrap TWRP.
Sent from my Nexus 7 using XDA Premium HD app

ted77usa said:
ATTMK2kernelmodules Original Post i don't think u would like to go over 1000 post on that thread..... and the on the bottom is SHOstock_v3.0_Safestrap_Ready link that also confirmed work by several people.......hope this help u to get start it..... .
Bootloader:................Use:...................Custom Rom:
MDL/MDB.......................LOKI.....................4.2.2......4.3.....4.4 ALL WORK (....LUCKY U....)
MF3................................SS-v3.65................ONLY FLASH 4.2.2 ROM (Slot1,Slot2 and Stock ALL WORK)
MK2................................SS-v3.71................SOME 4.3 ROM WORK (Slot1,Slot2 and Stock ALL WORK (confirmed))
Click to expand...
Click to collapse
What's SHOStock? An alternative to the ATTMK2Module?
<3 I can see that this is a bangin' start to an awesome and new relationship, between me, my S4, and my new home...the S4 community.
Sent from my Nexus 7 using XDA Premium HD app

By the way...since the ROM selection is limited, I assume heavy XPosed use is okay, and quite common?
Which ROM do you guys prefer?
I assume that sites and articles like this one: http://www.droidviews.com/best-custom-roms-for-att-samsung-galaxy-s4-sgh-i337/
aren't reliable sources--they probably don't take into account the the ATT S4 compatibility issues. This is showing CM11, Carbon, KangaBean, Infamous...am I correct in my assumption that those are for the lucky birdies that had MDL/MDB, and didn't need Safestrap?
Has someone put together a compatibility/guide megathread? I think I will if it hasn't been done.
Sent from my Nexus 7 using XDA Premium HD app

Jamesyboy said:
What's SHOStock? An alternative to the ATTMK2Module?
<3 I can see that this is a bangin' start to an awesome and new relationship, between me, my S4, and my new home...the S4 community.
Sent from my Nexus 7 using XDA Premium HD app
Click to expand...
Click to collapse
Welcome aboard!!!! Firstable are u on MF3 firmware or MK2 frimware......? both are using SafeStrap (SS) as custom recovery as of right now. Like i said on previous post MF3 use SS-v3.65 so that u able to install only 4.2.2 TW custom rom or 4.2.2 Google Play Edition (GPE) rom. If u are on MK2 firmware u can only use SS-v3.71 and able to install some of 4.3 custom rom (SHOstock-v3.0-Safestrap-Ready) is one of them that worked......Hyperdrive-RL12 from verizon thread also seem pretty good but u need to add your APN manually if u are on ATT network. Both firmware MF3 and MK2 are use different kernel modules, so after flashing custom Rom you NEED to flash your current firmware kernel modules also, otherwise u won't be able to connect to WiFi,bluetooth,gps etc..... hope this make sense to you......i know is kinda confusing ......but the more u read is the more it would make sense.... Check this thread for list of compatible rom Official AT&T S4 Safestrap Discussion Q/A

One more thing. My S4 will be here tomorrow. Let's say I get lucky and find MDL/MDB on my device. Do I need to hurry and avoid a software update, or avoid a data connection? Or do the updates proceed only with user interaction? The rooting is the same for all 3 devices, but if I do get MDL/MDB or the next one, I'll have to update the baseband before flashing newer ROMs, right?
Sent from my Nexus 7 using XDA Premium HD app

ted77usa said:
Welcome aboard!!!! Firstable are u on MF3 firmware or MK2 frimware......? both are using SafeStrap (SS) as custom recovery as of right now. Like i said on previous post MF3 use SS-v3.65 so that u able to install only 4.2.2 TW custom rom or 4.2.2 Google Play Edition (GPE) rom. If u are on MK2 firmware u can only use SS-v3.71 and able to install some of 4.3 custom rom (SHOstock-v3.0-Safestrap-Ready) is one of them......Hyperdrive-RL12 from verizon thread also seem pretty good but u need to add your APN manually if u are on ATT network. Both firmware MF3 and MK2 are use different kernel modules, so after flashing custom Rom you NEED to flash your cureent firmware kernel modules also otherwise u won't be able to connect to WiFi,bluetooth,gps etc..... hope this make sense to you......i know is kinda confusing ......but the more u read is the more it would make sense....
Click to expand...
Click to collapse
It makes sense, I'm mostly just unfamiliar, as opposed to being completely useless, but you guys have been amazing...you've already shot me up to about 80% on a distribution curve.
Why would anyone stick with MF3? MK2 is an update for MF3, right? Why don't those users update, then safestrap 3.71 it, so they can use 4.3 roms? It'd seem kinda funky to me to be stuck with a 4-2 ROM by choice, unless they're doing it solely for the GPE ROM.
These firmware kernel modules...I'll have the same modules for each ROM I flash right? Or are these modules a .zip that I'll find in each ROM thread, for each carrier.
By the way, APN settings don't scare me. Here, you might actually appreciate this work--done right after ATT's LTE network came online (I believe the Note was the first device that utilized it?...If it wasn't, it was definitely the first to tax the network.)::
http://forum.xda-developers.com/showthread.php?p=26877683
Edit: the Q&A thread for Safe strap was reasonable...but it still talks about kernel flashes, and blown QFusee (har?)
I guess I mainly need to come to grips with the kernel situation. The Q&A says that you can't use custom kernels if you've updated to OTA, but doesn't mention factory MF3 builds, and it isn't really very clear about the module/kernel module situation.
You said I need to flags my **current** firmware kernel modules: are those different if I get a device with MF3 than those for MK2? Or are these just modules that I create myself (based upon whatever's in my stock ROM slot maybe?) in recovery?
Sent from my Nexus 7 using XDA Premium HD app

Jamesyboy said:
One more thing. My S4 will be here tomorrow. Let's say I get lucky and find MDL/MDB on my device. Do I need to hurry and avoid a software update, or avoid a data connection? Or do the updates proceed only with user interaction? The rooting is the same for all 3 devices, but if I do get MDL/MDB or the next one, I'll have to update the baseband before flashing newer ROMs, right?
Sent from my Nexus 7 using XDA Premium HD app
Click to expand...
Click to collapse
I dont think u can get MDB/MDL firmware again these days.....but if u do....damn u are pretty lucky....my suggestion is Do Not insert your ATT sim card yet ....since they can do OTA update ( On The Air ).....and check your baseband....IF u do ....root it right away....install titanium back up and freeze/uninstall ATT software update.apk......install custom recovery CWM or TWRP ..... and make sure u have auto loki recovery....if not save loki.doki patch on your Sd Card....PM me for the link and all the files .....i still have the files since i used to have MDB firmware and got replacement phone from ATT when my son broke the screen....:crying:
Jamesyboy said:
It makes sense, I'm mostly just unfamiliar, as opposed to being completely useless, but you guys have been amazing...you've already shot me up to about 80% on a distribution curve.
Why would anyone stick with MF3? MK2 is an update for MF3, right? Why don't those users update, then safestrap 3.71 it, so they can use 4.3 roms? It'd seem kinda funky to me to be stuck with a 4-2 ROM by choice, unless they're doing it solely for the GPE ROM.
These firmware kernel modules...I'll have the same modules for each ROM I flash right? Or are these modules a .zip that I'll find in each ROM thread, for each carrier.
Sent from my Nexus 7 using XDA Premium HD app
Click to expand...
Click to collapse
MDB>MDL>MF3>MJ6>Mj9>MK2.......the reason of the update is ATT trying to lock bootloader so we won't be able to install custom rom or do what ever we want to the phone.......but either way.....XDA member always found away to cracked it....so some people have to upgrade not by choice.....most of them by accident....like me ( cracked my screen ) or they install wrong recovery.....(bricked) so be careful when installing custom recovery.....like i said....we need to know what kinda firmware that u have so we can help u.....LOL now i got it why u dont know yet....since u dont have the phone yet.......... but is ok.....that's the right thing to do.....get to know your stuff first before u brick your phone.....:good: so basically u need to match your kernel modules with your firmware otherwise it won't be able to connect to Wifi,bluetooth,gps,etc it doesn't matter if u OTA to MF3 or MK2.....or it come with MF3 or MK2....

ted77usa said:
I dont think u can get MDB/MDL firmware again these days.....but if u do....damn u are pretty lucky....my suggestion is Do Not insert your ATT sim card yet ....since they can do OTA update ( On The Air ).....and check your baseband....IF u do ....root it right away....install titanium back up and freeze/uninstall ATT software update.apk......install custom recovery CWM or TWRP ..... and make sure u have auto loki recovery....if not save loki.doki patch on your Sd Card....PM me for the link and all the files .....i still have the files since i used to have MDB firmware and got replacement phone from ATT when my son broke the screen....:crying:
MDB>MDL>MF3>MJ6>Mj9>MK2.......the reason of the update is ATT trying to lock bootloader so we won't be able to install custom rom or do what ever we want to the phone.......but either way.....XDA member always found away to cracked it....so some people have to upgrade not by choice.....most of them by accident....like me ( cracked my screen ) or they install wrong recovery.....(bricked) so be careful when installing custom recovery.....like i said....we need to know what kinda firmware that u have so we can help u.....LOL now i got it why u dont know yet....since u dont have the phone yet.......... but is ok.....that's the right thing to do.....get to know your stuff first before u brick your phone.....:good:
Click to expand...
Click to collapse
Groovy! I'll check back in tomorrow! Happy New Years!
(Sent you a PM, as well.)
Sent from my Nexus 7 using XDA Premium HD app

[Q] How to root?

I've tried Kingo.com and it won't do anything with my device I don't know what else to do I'm still running 4.3 Can someone please help me

mossman90 said:
I've tried Kingo.com and it won't do anything with my device I don't know what else to do I'm still running 4.3 Can someone please help me
Click to expand...
Click to collapse
Search vroot. It should take care of you. Same concerns as kingo.
Sent from my SM-N900V using Tapatalk

mossman90 said:
I've tried Kingo.com and it won't do anything with my device I don't know what else to do I'm still running 4.3 Can someone please help me
Click to expand...
Click to collapse
you could try an older version of kingo. 1.1.6 is what worked for me. I posted a link to my dropbox folder in the q & a thread where someone asked for it. I have heard vroot for other folks, but I never tried it.

Bonniecal said:
if kingo dont wortk then try to use kitkat if it support on your phone. then you can easily root your phone. kitkat is must helpful apps.
Click to expand...
Click to collapse
KitKat can't be rooted, you have to install a rooted KK ROM through an already rooted device in SafeStrap then install the firmware with Odin.
Gladyscoleman said:
4.3 built in is better then KK. Most of app are not compatible with KK like ISIS wallet, Tap to Pay
Click to expand...
Click to collapse
I have 124 user apps installed and every one of them works fine. You say most apps aren't compatible, can you please list which ones don't work for you?

airmaxx23 said:
KitKat can't be rooted, you have to install KK through an already rooted device in SafeStrap then install the firmware with Odin.
I have 124 user apps installed and every one of them works fine. You say most apps aren't compatible, can you please list which ones don't work for you?
Click to expand...
Click to collapse
This is not 100% accurate. You flash a ROOTED kitkat in SafeStrap and then flash the proper kernels and such in Odin. You are not flashing the full firmware using Odin.

chriskader said:
This is not 100% accurate. You flash a ROOTED kitkat in SafeStrap and then flash the proper kernels and such in Odin. You are not flashing the full firmware using Odin.
Click to expand...
Click to collapse
I see what you're saying but I was just giving a brief rundown, I'm going to edit it though. According to Beans you're flashing the firmware in odin, this is taken from this post:
http://forum.xda-developers.com/showpost.php?p=52088484&postcount=2
Step- 6 - Flash NC2 Firmware/Bootloader Package check auto reboot in Odin
Click to expand...
Click to collapse

airmaxx23 said:
I see what you're saying but I was just giving a brief rundown, I'm going to edit it though. According to Beans you're flashing the firmware in odin, this is taken from this post:
http://forum.xda-developers.com/showpost.php?p=52088484&postcount=2
Click to expand...
Click to collapse
The file you are flashing is 76MB. No Note 3 firmware is 76MB. You are flashing a kernel, modem and bootloader that are not included with the SafeStrap flash.

chriskader said:
The file you are flashing is 76MB. No Note 3 firmware is 76MB. You are flashing a kernel, modem and bootloader that are not included with the SafeStrap flash.
Click to expand...
Click to collapse
...which he is calling firmware in his instructions. You could ask him why he's calling it that. I realize what it is I'm just posting it the way his instructions have it and most people here have been calling it to keep things separated.

[Q] Graviton ROM S4 i337

Hey Forum,
I installed Graviton ROM for AT&T S4 using Safestrap but once everything finished, it went into a bootloop with a blue snake spinning endlessly with "Graviton" in the center. Anyone have any ideas?

sympathizer said:
Hey Forum,
I installed Graviton ROM for AT&T S4 using Safestrap but once everything finished, it went into a bootloop with a blue snake spinning endlessly with "Graviton" in the center. Anyone have any ideas?
Click to expand...
Click to collapse
Please provide more information.
- What bootloader do you have? Did you ever take NB1 OTA?
- What version of Graviton are you flashing?
- What version of safestrap do you have?
- If you are flashing kitkat version, are you following the Deadly Venom Tool?
The more information you provide, the easier it will be to assist.

sympathizer said:
Hey Forum,
I installed Graviton ROM for AT&T S4 using Safestrap but once everything finished, it went into a bootloop with a blue snake spinning endlessly with "Graviton" in the center. Anyone have any ideas?
Click to expand...
Click to collapse
1) Did you wipe data?
2) Did you install the specific Safestrap version?

jmjoyas said:
Please provide more information.
- What bootloader do you have? Did you ever take NB1 OTA?
- What version of Graviton are you flashing?
- What version of safestrap do you have?
- If you are flashing kitkat version, are you following the Deadly Venom Tool?
The more information you provide, the easier it will be to assist.
Click to expand...
Click to collapse
4.4.2 NB1
"Graviton_S4_v3.0_20140502_SafeStrap"
Safestrap v3.72
Yes, I followed the Deadly Venom Kitkat Magic Tool
DeadlySin9 said:
1) Did you wipe data?
2) Did you install the specific Safestrap version?
Click to expand...
Click to collapse
Yes, I installed the 3.72 version of Safestrap

sympathizer said:
4.4.2 NB1
"Graviton_S4_v3.0_20140502_SafeStrap"
Safestrap v3.72
Yes, I followed the Deadly Venom Kitkat Magic Tool
Yes, I installed the 3.72 version of Safestrap
Click to expand...
Click to collapse
Did you flash AT&TNB1KernelModules.zip (file present in the tool extract) along with the ROM? After the rom flash and before phone rebooted, did you put the phone in download mode and flash the NB1 ap/bl/cp files from the tool?
Also, only stock slot in safestrap works for kitkat.
If you have done all these, please provide the exact step by step operations you have done.

jmjoyas said:
Did you flash AT&TNB1KernelModules.zip (file present in the tool extract) along with the ROM? After the rom flash and before phone rebooted, did you put the phone in download mode and flash the NB1 ap/bl/cp files from the tool?
Also, only stock slot in safestrap works for kitkat.
If you have done all these, please provide the exact step by step operations you have done.
Click to expand...
Click to collapse
I'm running 4.4.2 ATT NB1 stock rooted rom. I have Safestrap 3.72 downloaded, and Graviton_S4_v3.0_20140502_SafeStrap.zip as well as the AT&TNB1KernelModules.zip. I reboot into recovery click install (on stock rom slot) and add the Graviton_S4_v3.0_20140502_SafeStrap and AT&TNB1KernerlModules zips and flash. After it fully successfully finished, I click home and boot into download mode where I flash the ap/bl/cp files from the Deadly Venom KitKat Magic Tool. It then reboots, and after the Samsung custom(with the lock), it fully goes black.

sympathizer said:
I'm running 4.4.2 ATT NB1 stock rooted rom. I have Safestrap 3.72 downloaded, and Graviton_S4_v3.0_20140502_SafeStrap.zip as well as the AT&TNB1KernelModules.zip. I reboot into recovery click install (on stock rom slot) and add the Graviton_S4_v3.0_20140502_SafeStrap and AT&TNB1KernerlModules zips and flash. After it fully successfully finished, I click home and boot into download mode where I flash the ap/bl/cp files from the Deadly Venom KitKat Magic Tool. It then reboots, and after the Samsung custom(with the lock), it fully goes black.
Click to expand...
Click to collapse
Did you wipe data anywhere in there? If not, do that. If you did, Gravitron does seem to take longer to boot first time than other ROMs so give it time.

DeadlySin9 said:
Did you wipe data anywhere in there? If not, do that. If you did, Gravitron does seem to take longer to boot first time than other ROMs so give it time.
Click to expand...
Click to collapse
But how long?

Its always best to do a clean wipe (everything except sdcard in advanced wipe of safestrap) before flashing another rom
Sent from my Venue 8 3830 using Tapatalk

​
jmjoyas said:
Its always best to do a clean wipe (everything except sdcard in advanced wipe of safestrap) before flashing another rom
Sent from my Venue 8 3830 using Tapatalk
Click to expand...
Click to collapse
I did that too. Can you please explain it step-by-step?

AOSP lockscreen
@upndwn4par
I have been using this rom for a while on my att s4 . I recently checked out the eclipse rom (http://forum.xda-developers.com/showthread.php?t=2351840) . Due to some problems of that rom i changed back to Graviton. One thing i really liked in Eclipse is the stock lockscree. Is there any way to add that in this rom? i tried to post the question in the rom devlopment post but couldn't. Any guide on how to do that?
Thanks

max420420 said:
@upndwn4par
I have been using this rom for a while on my att s4 . I recently checked out the eclipse rom (http://forum.xda-developers.com/showthread.php?t=2351840) . Due to some problems of that rom i changed back to Graviton. One thing i really liked in Eclipse is the stock lockscree. Is there any way to add that in this rom? i tried to post the question in the rom devlopment post but couldn't. Any guide on how to do that?
Thanks
Click to expand...
Click to collapse
There is a guide by didact74 in the VZW section, but I don't think that has been updated for KitKat. There are Xposed modules that do the same thing.

upndwn4par said:
There is a guide by didact74 in the VZW section, but I don't think that has been updated for KitKat. There are Xposed modules that do the same thing.
Click to expand...
Click to collapse
Thank you so much for your reply!!!
I checked his guide..... Those steps are far beyond my ability :crying: Most i can do is flash zip files and editing build prop :laugh:
I tried his flashable zip file . That didnt work. I think that only works with stock rom. I tried xposed module . didnt work either :crying:
If it's not too much to ask. is there any chance you can make a flashable zip specific for your rom? :good::good::good:
Thank you again!!!!!!!!

max420420 said:
Thank you so much for your reply!!!
I checked his guide..... Those steps are far beyond my ability :crying: Most i can do is flash zip files and editing build prop :laugh:
I tried his flashable zip file . That didnt work. I think that only works with stock rom. I tried xposed module . didnt work either :crying:
If it's not too much to ask. is there any chance you can make a flashable zip specific for your rom? :good::good::good:
Thank you again!!!!!!!!
Click to expand...
Click to collapse
I always had that mod in Graviton, but no one seemed to use it. I kinda miss it as an option, so I'll add it to the next update.

upndwn4par said:
I always had that mod in Graviton, but no one seemed to use it. I kinda miss it as an option, so I'll add it to the next update.
Click to expand...
Click to collapse
This rom will best rom then! already best for me. Waiting for next update!!!:good::good:

upndwn4par said:
I always had that mod in Graviton, but no one seemed to use it. I kinda miss it as an option, so I'll add it to the next update.
Click to expand...
Click to collapse
Hey!!! checked the new relese! it was awesome. btw gravity box hold for torch and double tap to turn screen of is not working. any thought?

ATT S4 KitKat 4.4.2 - Is Cyanogenmod possible? alts...

Hi All,
Appreciate the guides and community here. Looking for a little help on my ATT S4 KitKat 4.4.2. It's rooted via Towelroot.
I want to run a custom rom that isn't slow. I have Odin, proper Samsung USB drivers.
1) Can CNW be used on my phone to boot to recovery? If not, what are the alternatives and how do I use them (is there a guide you can share)?
2) Do I have NC1 on my phone, what the heck is NC2, NC1-what does this mean, is it relevant?
Thanks all
-Christian

If you have updated your phone to the att 4.4.2 firmware then you should be on NC1 which means you cannot put cwm or any CM rom. The only recovery you can use is safestrap. After that you can only flash rooms the specifically say safestrap compatible and you must flash the att_nc1 module after flashing rom for WiFi to work. Read the safestrap thread under the development section before doing anything.
Sent from my GT-P3110 using Tapatalk

Thanks for the help-trying it out now. Will keep ya posted

freestylejunki32 said:
If you have updated your phone to the att 4.4.2 firmware then you should be on NC1 which means you cannot put cwm or any CM rom. The only recovery you can use is safestrap. After that you can only flash rooms the specifically say safestrap compatible and you must flash the att_nc1 module after flashing rom for WiFi to work. Read the safestrap thread under the development section before doing anything.
http://forum.xda-developers.com/showthread.php?t=2572978
Sent from my GT-P3110 using Tapatalk
Click to expand...
Click to collapse
Is this the thread you were referring to?
http://forum.xda-developers.com/showthread.php?t=2572978

Yes, I would also read over All Things ATT/MK2 etc in General--:good:
Those numbers NC1 etc are your build version. Can be found under Settings/About Phone. It will dictate what you can and can't do on your phone--We have no NC2 yet. :good:

rugmankc said:
Yes, I would also read over All Things ATT/MK2 etc in General--:good:
Those numbers NC1 etc are your build version. Can be found under Settings/About Phone. It will dictate what you can and can't do on your phone--We have no NC2 yet. :good:
Click to expand...
Click to collapse
Thanks. I have nb1. No luck getting safe strap to take. Install completes but does not recognize status as installed or allow boot to recovery.
I have rooted, supersu, busybox, and no luck with safestrap. Any ideas.
Upon booting I notice an icon that looks like a unlocked lock beneath the samsung logo. Touching it does nothing...
Thanks for getting back to me

potat5656 said:
Thanks. I have nb1. No luck getting safe strap to take. Install completes but does not recognize status as installed or allow boot to recovery.
I have rooted, supersu, busybox, and no luck with safestrap. Any ideas.
Upon booting I notice an icon that looks like a unlocked lock beneath the samsung logo. Touching it does nothing...
Thanks for getting back to me
Click to expand...
Click to collapse
I don't use safestrap. So not sure. Did you wipe all including system. And flash to correct slot. Stock slot I believe. Use correct safestrap. Also need sellinux, spelling? The lock is suppose to be there if rooted. Read the last 20 pages of the hash code safestrap thread plus the op. And same on All Things ATT/MK2 in General. May give some ideas. ☺
Sent from my GT-I9505G using Tapatalk

rugmankc said:
I don't use safestrap. So not sure. Did you wipe all including system. And flash to correct slot. Stock slot I believe. Use correct safestrap. Also need sellinux, spelling? The lock is suppose to be there if rooted. Read the last 20 pages of the hash code safestrap thread plus the op. And same on All Things ATT/MK2 in General. May give some ideas. ☺
Sent from my GT-I9505G using Tapatalk
Click to expand...
Click to collapse
Aha! Safestrap running and custom ROM installed. Is there an index comparing all Safestrap/Touchwiz based roms? Runnign SHO right now and it's pretty bland (resolution looks low too).
I'm looking for something like a stock nexus experience with WiFi tethering.
thanks for the help mates

potat5656 said:
Aha! Safestrap running and custom ROM installed. Is there an index comparing all Safestrap/Touchwiz based roms? Runnign SHO right now and it's pretty bland (resolution looks low too).
I'm looking for something like a stock nexus experience with WiFi tethering.
thanks for the help mates
Click to expand...
Click to collapse
Not sure on index. Best though to try them yourself as they don't always work the same on different phones.
Sent from my GT-I9505G using Tapatalk

potat5656 said:
Aha! Safestrap running and custom ROM installed. Is there an index comparing all Safestrap/Touchwiz based roms? Runnign SHO right now and it's pretty bland (resolution looks low too).
I'm looking for something like a stock nexus experience with WiFi tethering.
thanks for the help mates
Click to expand...
Click to collapse
Iam all for custom ROMS. I made one for the Tab3. If all you want is the stock Nexus experience, you could just download the Google Now Launcher which is Google release the AOSP launcher. Then if you want the individual AOSP apps, you can do a search here or a google search, and you will find XDA threads that provide the apps with installation instructions.

[newbie] galaxy s4 att UCUAMDL

hi all , sorry but my english is so bad
i just bought a galaxy s4 att secondhand , this had bassband UCUAMDL . and i checked the lastest version of it is 4.2.2
can i upgrade my phone up to 4.4 ?
and i dont know terminology about "MF3 - MK2 ............."
could you tell me ?
thanks so much :victory::victory::victory:

Root. Install TWRP recovery. Flash a rom 4.4.4 or try some lollipop love!! You are lucky enough to have an unlocked bootloader..

HORiZUN said:
Root. Install TWRP recovery. Flash a rom 4.4.4 or try some lollipop love!! You are lucky enough to have an unlocked bootloader..
Click to expand...
Click to collapse
thanks so much ,
can you get me links :crying:
but MF3 - MK2 ............. what is it ?
when i flash rom , what i have to notice ?

I hope you don't have MF3. If that's the case, I'm pretty sure that SafeStrap is your only recovery option.

HORiZUN said:
I hope you don't have MF3. If that's the case, I'm pretty sure that SafeStrap is your only recovery option.
Click to expand...
Click to collapse
but i dont know MF3 >"<
what is it ?
how check it on my phone ?

HORiZUN said:
I hope you don't have MF3. If that's the case, I'm pretty sure that SafeStrap is your only recovery option.
Click to expand...
Click to collapse
i am in 4.2.2

sonluyen94 said:
but i dont know MF3 >"<
what is it ?
how check it on my phone ?
Click to expand...
Click to collapse
I have the same question. hopefully someone will be able to explain it to us.

MF3 would be the last three digits of your system software version

HORiZUN said:
MF3 would be the last three digits of your system software version
Click to expand...
Click to collapse
my baseband : I337UCUAMDL
kernel version : 3.4.0-453947 - [email protected] #1
android version : 4.2.2
build number : JDQ39.I337UCUAMDL
it is my phone >"<

You don't have MF3, and that's a good thing. You can install a custom recovery. You need to root, install a custom recovery, and then you can start flashing roms.

sonluyen94 said:
my baseband : I337UCUAMDL
kernel version : 3.4.0-453947 - [email protected] #1
android version : 4.2.2
build number : JDQ39.I337UCUAMDL
it is my phone >"<
Click to expand...
Click to collapse
nogods said:
I have the same question. hopefully someone will be able to explain it to us.
Click to expand...
Click to collapse
Ok, use TowelRoot.com to root the phone, and use TWRP manager to install TWRP on your device. After that check out the development section of this very forum and flash any ROM you wish. 4.2.2 or 4.4.4 or 5.0 or anywhere in between (Just read the thread and instructions first!!!). Whatever you do, never update using the OTA updater on the stock ROM! Also, dotn ever flash an image in Odin that isn't MDL, because if you go higher than MDL, you lose the ability to have a custom recovery. You are one of the lucky ones, cherish the ability, and read through threads before flashing, stuff. Good Luck!
Also, you don't have to worry if the ROM says safestrap compatible, because you don't have to use Safestrap, you can have TWRP instead (which is better), because all Safestrap ROMS are TWRP compatible, but not vice-versa.

npjohnson said:
Ok, use TowelRoot.com to root the phone, and use TWRP manager to install TWRP on your device. After that check out the development section of this very forum and flash any ROM you wish. 4.2.2 or 4.4.4 or 5.0 or anywhere in between (Just read the thread and instructions first!!!). Whatever you do, never update using the OTA updater on the stock ROM! Also, dotn ever flash an image in Odin that isn't MDL, because if you go higher than MDL, you lose the ability to have a custom recovery. You are one of the lucky ones, cherish the ability, and read through threads before flashing, stuff. Good Luck!
Also, you don't have to worry if the ROM says safestrap compatible, because you don't have to use Safestrap, you can have TWRP instead (which is better), because all Safestrap ROMS are TWRP compatible, but not vice-versa.
Click to expand...
Click to collapse
thanks so much :fingers-crossed:
but can you talk to me what rom is good about battery ?

sonluyen94 said:
thanks so much :fingers-crossed:
but can you talk to me what rom is good about battery ?
Click to expand...
Click to collapse
Most if not all. They're all built from either GPE or CM.

All good advice. Plus when you root and get Twrp recovery installed do a backup thru Twrp (Nandroid) and keep on phone and put a copy on pc. That way you have something to restore if you get in trouble. Also, your bootloader is not unlocked. No Att i337s are. Instead devs use an exploit called Loki-Doki to bypass Sammy's security checks to allow custom roms/kernels etc to flash. You can google Loki Doki and read up on it. If the rom or kernel is not loki'd you will have to flash the zip thru recovery to allow the rom or kernel to flash. You will come across this when flashing International roms and kernels. I don't have link any more so maybe someone else can link it. Keep it on SD card. Like noted read OP carefully and last 20 pages of rom thread. Builds newer than MDL are blocked by Att from using Loki and require SafeStrap. Which you don't need to worry about. Although you can read up on it. Good Luck. [emoji1]
Sent from my iPhone 6 Plus using Tapatalk

I hope you won't mind me jumping in your thread.,
I've recently had to odin my mdl phone back to stock. I haven't done that in a long time. I have root, and supersu, and busybox. The TWRP Manager app is malfunctioning and I cannot use it to install recovery. They list the crash I am experiencing in the play store as a known problem, and they say it will take time to fix. I have a good loki'd copy of twrp but the stock recovery doesn't want to install it. I even changed the name to "update.zip" and it fails. So my problem is I need a recovery. I am considering installing Clockworkmod's ROM Manager to install their recovery, and then using their recovery to install the good loki'd twrp that I want. Does this sound like a good plan? I have been away from this hobby for a while.

plasticglock said:
I hope you won't mind me jumping in your thread.,
I've recently had to odin my mdl phone back to stock. I haven't done that in a long time. I have root, and supersu, and busybox. The TWRP Manager app is malfunctioning and I cannot use it to install recovery. They list the crash I am experiencing in the play store as a known problem, and they say it will take time to fix. I have a good loki'd copy of twrp but the stock recovery doesn't want to install it. I even changed the name to "update.zip" and it fails. So my problem is I need a recovery. I am considering installing Clockworkmod's ROM Manager to install their recovery, and then using their recovery to install the good loki'd twrp that I want. Does this sound like a good plan? I have been away from this hobby for a while.
Click to expand...
Click to collapse
You can flash a recovery zip in a custom recovery. So if you have the loki'd twrp in a zip file, flashing cwm first will work
Sent from my Nexus 9 using XDA Free mobile app

jd1639 said:
You can flash a recovery zip in a custom recovery. So if you have the loki'd twrp in a zip file, flashing cwm first will work
Sent from my Nexus 9 using XDA Free mobile app
Click to expand...
Click to collapse
Thanks man, that's exactly what I was planning. I remember avoiding CWM last year due to some issue on this device so I just wanted to make sure it wasn't going to do more harm than good. :good:

plasticglock said:
Thanks man, that's exactly what I was planning. I remember avoiding CWM last year due to some issue on this device so I just wanted to make sure it wasn't going to do more harm than good. :good:
Click to expand...
Click to collapse
ROM manager didn't work. It said it installed cwm recovery but it didn't. I was able to install the latest TWRP with this ROM Installer and it worked like a charm! I then installed my custom TWRP from there, rebooted recovery, and installed Danvh's Google edition. I'm setting it up right now. I'm so happy to get my phone back. I just hope the odin flash fixed my problems.
To the OP try ROM installer to get your custom recovery going. Also if you like simple and fast AOSP check out Danvh's google edition rom, but stick to 4.4.4 for now. 5.0 is out but its buggy. Here's a link to the custom version of twrp that I use. https://www.dropbox.com/l/iDQQqlzNbyiFbQrMF4XcRc It's already loki'd so you can flash it if you have any problems with the latest build.