Database Users

MF3 stock firmware question - Don't bash

First let me say I'm not a noob.. I'm a developer but don't really deal with rooting, etc. So please don't bash...
I tried searching for answers to this question, but couldn't find an exact one..
I have the AT&T S4 with the MF3 OTA update. I want to try and install a custom rom, but in reading the hot to's, it says not to attempt to do it with the mf3 update since it's boot locked. Can I re-install a stock S4 firmware using odin and then, after a stock firmware is installed, then install twrp with a custom rom?
Thanks!

itsdavetime said:
First let me say I'm not a noob.. I'm a developer but don't really deal with rooting, etc. So please don't bash...
I tried searching for answers to this question, but couldn't find an exact one..
I have the AT&T S4 with the MF3 OTA update. I want to try and install a custom rom, but in reading the hot to's, it says not to attempt to do it with the mf3 update since it's boot locked. Can I re-install a stock S4 firmware using odin and then, after a stock firmware is installed, then install twrp with a custom rom?
Thanks!
Click to expand...
Click to collapse
No.

scott14719 said:
No.
Click to expand...
Click to collapse
Ha.. Well, that's an exact answer

There is a method in the works on the VZW forums that will allow custom ROMs on locked bootloaders. We are hoping to get it ported over the our side. Things are looking very promising. This method, known as a safestrap, will also allow multiple ROMs at once. Up to 4 slots. It keeps your stock ROM safe so if you have a bad flash, you can still boot right back and have a functional phone. You are only limited by how much space you have on your internal SD.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app

itsdavetime said:
Ha.. Well, that's an exact answer
Click to expand...
Click to collapse
graydiggy said:
There is a method in the works on the VZW forums that will allow custom ROMs on locked bootloaders. We are hoping to get it ported over the our side. Things are looking very promising. This method, known as a safestrap, will also allow multiple ROMs at once. Up to 4 slots. It keeps your stock ROM safe so if you have a bad flash, you can still boot right back and have a functional phone. You are only limited by how much space you have on your internal SD.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Until then, OP, my advise is to just roll on stock/unrooted. Period.
Cheers

Can't Install CWM?

I have a rooted MK2 device. I tried installing CWM through ROM Manager but my phone will not boot the CWM and when I try it comes up with an error.
It seems to be installing a Loki'd version of CWM recovery will solve the problem, but I don't how to flash loki recoveries and I've looked all over the forums for one specific to loki'd recoveries. Can someone help me out please? I'm relatively new at this so I'm totally unsure about how to proceed. Many thanks!

Sadly, no custom recoveries are currently available for MK2.

Kaze105 said:
Sadly, no custom recoveries are currently available for MK2.
Click to expand...
Click to collapse
Oh no Well I have a few questions then.
1. I would like to install a 4.4 Google Edition rom. Is there any way for me to accomplish this? Also, is it a bad idea to go ahead and flash it without a recovery?
2. Should I revert the recovery back to original? How would I go about doing that?

hsu0216 said:
Oh no Well I have a few questions then.
1. I would like to install a 4.4 Google Edition rom. Is there any way for me to accomplish this? Also, is it a bad idea to go ahead and flash it without a recovery?
2. Should I revert the recovery back to original? How would I go about doing that?
Click to expand...
Click to collapse
There isn't anything you can do so far. The only thing you could do is use an app I can't remember the name of to flash mods to your current system, but you can not flash ROMs and definitely not anything that may need a different kernel. If you want to get a working recovery then find the MJ6-MJ9 thread but only use the recovery tar file, not the rest of it.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app

you sir have a locked bootloader (i think)
hsu0216 said:
I have a rooted MK2 device. I tried installing CWM through ROM Manager but my phone will not boot the CWM and when I try it comes up with an error.
It seems to be installing a Loki'd version of CWM recovery will solve the problem, but I don't how to flash loki recoveries and I've looked all over the forums for one specific to loki'd recoveries. Can someone help me out please? I'm relatively new at this so I'm totally unsure about how to proceed. Many thanks!
Click to expand...
Click to collapse
well.....if you were on MF3 then you could load safestrap and then get the google edition but it wont support the 4.4 only the 4.2.2 version of the GE
thats what i did. i highly doubt there will be an unlocked bootloader for MK2 im on mf3 and cant even update to 4.3 MK2.....ill ask the developer of safestrap and ask him because he was getting a MK2 galaxy s4 on att last week and he was doing some testing....or you can do some research your self but im happy to help even though my account says im a junior member i know quite a lot....
if safestrap works here is a link http://forum.xda-developers.com/showthread.php?t=2448726
IF SAFESTRAP WORKS LOOK UP A GUIDE ON HOW TO USE IT I AM NOT RESPONSIBLE IF YOU BRICK YOUR PHONE BECAUSE I TOLD YOU ABOUT IT also dont use the stock rom slot if all this works

Dude.
Search. Read. Repeat.

Anx XDA says ni question too stupid..Well some reaponses are..Oh GOD!!!
Sent from my SAMSUNG-SGH-I337 using Tapatalk

r1tesh said:
Anx XDA says ni question too stupid..Well some reaponses are..Oh GOD!!!
Sent from my SAMSUNG-SGH-I337 using Tapatalk
Click to expand...
Click to collapse
No question too stupid. But asking a question that has been answered hundreds of times and refusing to use the search button...

To Root and to Tinker--Rooting and Recovery

So, I'm new to the locked bootloader scene. The root & ROM threads, tutorials, and videos seem to root via a Terminal Emulator process, then install Safestrap. Those same sites and videos say that when you're flashing a ROM after selecting a new ROM Slot, you have to flash "whatever modules and packages are for your device", whatever that means. Since I can't find these packages anywhere, is it safe to assume that I can just root, install Safestrap, create a ROM Slot, and start flashing away as if nothing's up? Or do I need to worry about this boot patch and some "Loki Doki" thing I heard about. I'm sure these answers exist, and I've done my due diligence, but these threads have either been buried for good, or are such a common a knowledge subset that I can't find anything concrete. Even the videos I've seen talk about the "modules" you have to flash. I'm an experienced Androidist, tinkerer, and tweaker. The information I'm finding doesn't provide you with the big picture. It's all, "MJ2 read this, and follow these 9 steps", and "mk2 follow these 10 steps". But none of them tell you what to do in Safe strap recovery, and if you needs some Loki/module magic.
Help a brotha out? I'll return the favor 10-fold, I can promise you that much. I'll be quite active around here.
Thanks!
Sent from my Nexus 7 using XDA Premium HD app

First off you never said what baseband you were on but assuming that your on MK2 android 4.3 then let's start.
Use this method to root your device
http://forum.xda-developers.com/showthread.php?t=2569827
Since your on mk2 you can ONLY use safe strap 3.71 do not attempt to install safe strap 3.65 AND SAFE STRAP WILL BE THE ONLY RECOVERY YOU CAN INSTALL!
http://forum.xda-developers.com/showthread.php?t=2448925
And note that 3.71 is still in beta as of right now there are still bugs and YOU CAN ONLY FLASH A COUPLE OF ROMS.
From the same thread cause I know your not going to go through the forums and read, download the attmk2module.zip that ted77usa posted
http://forum.xda-developers.com/showthread.php?t=2448925
Root your device
Install safestrap after install, install recovery in safestrap apk.
There's only a few Roms you can flash
Darthstalker x in the att android development forum
Hyperdrive 12 in the Verizon android development forum download the one that says safestrap
A few have noted that some other Roms work but I haven't tested it out do some more reading.
After you download a rom
Reboot your device and go into safestrap recovery
Create a ROM slot ON ROM SLOT 1
DO NOT MESS WITH YOUR STOCK SLOT!
After creating a ROM slot go to install and install your rom.
After successfully installing a ROM reboot then go back into recovery and install the attmk2module.zip
Reboot and instead of going into recovery this time continue
It will take awhile to load its normal.
Now you should have a ROM.
Now go tinker with that.
AT&T SGH-I337 RUNNING HYPERDRIVE 12

ATTMK2kernelmodules Original Post i don't think u would like to go over 1000 post on that thread..... and at the bottom there is SHOstock_v3.0_Safestrap_Ready link that also confirmed work by several people.......hope this help u to get start it..... .
Bootloader:................Use:...................Custom Rom:
MDL/MDB.......................LOKI.....................4.2.2......4.3.....4.4 ALL WORK (....LUCKY U....)
MF3................................SS-v3.65................ONLY FLASH 4.2.2 ROM (Slot1,Slot2 and Stock ALL WORK)
MK2................................SS-v3.71................SOME 4.3 ROM WORK (Slot1,Slot2 and Stock ALL WORK (confirmed))

[email protected] said:
First off you never said what baseband you were on but assuming that your on MK2 android 4.3 then let's start.
Use this method to root your device
http://forum.xda-developers.com/showthread.php?t=2569827
Since your on mk2 you can ONLY use safe strap 3.71 do not attempt to install safe strap 3.65 AND SAFE STRAP WILL BE THE ONLY RECOVERY YOU CAN INSTALL!
http://forum.xda-developers.com/showthread.php?t=2448925
And note that 3.71 is still in beta as of right now there are still bugs and YOU CAN ONLY FLASH A COUPLE OF ROMS.
From the same thread cause I know your not going to go through the forums and read, download the attmk2module.zip that ted77usa posted
http://forum.xda-developers.com/showthread.php?t=2448925
Root your device
Install safestrap after install, install recovery in safestrap apk.
There's only a few Roms you can flash
Darthstalker x in the att android development forum
Hyperdrive 12 in the Verizon android development forum download the one that says safestrap
A few have noted that some other Roms work but I haven't tested it out do some more reading.
After you download a rom
Reboot your device and go into safestrap recovery
Create a ROM slot ON ROM SLOT 1
DO NOT MESS WITH YOUR STOCK SLOT!
After creating a ROM slot go to install and install your rom.
After successfully installing a ROM reboot then go back into recovery and install the attmk2module.zip
Reboot and instead of going into recovery this time continue
It will take awhile to load its normal.
Now you should have a ROM.
Now go tinker with that.
AT&T SGH-I337 RUNNING HYPERDRIVE 12
Click to expand...
Click to collapse
You're perfect in every way. ? Bromance FTW
You even answer threads like me. This helped a TON! I owe ya one.
Edit: last question. The instructions say to install the ROM, reboot, then install the modules. I assume that the reboot instruction means that we should reboot, boot into the ROM for the first time, then boot back into recovery and install the modules?
Or should I flash the ROM, power down, then boot into recovery (ensuring that the ROM is never booted before the modules are installed)-- I suppose I could just use the reboot recovery option in the Safestrap TWRP.
Sent from my Nexus 7 using XDA Premium HD app

ted77usa said:
ATTMK2kernelmodules Original Post i don't think u would like to go over 1000 post on that thread..... and the on the bottom is SHOstock_v3.0_Safestrap_Ready link that also confirmed work by several people.......hope this help u to get start it..... .
Bootloader:................Use:...................Custom Rom:
MDL/MDB.......................LOKI.....................4.2.2......4.3.....4.4 ALL WORK (....LUCKY U....)
MF3................................SS-v3.65................ONLY FLASH 4.2.2 ROM (Slot1,Slot2 and Stock ALL WORK)
MK2................................SS-v3.71................SOME 4.3 ROM WORK (Slot1,Slot2 and Stock ALL WORK (confirmed))
Click to expand...
Click to collapse
What's SHOStock? An alternative to the ATTMK2Module?
<3 I can see that this is a bangin' start to an awesome and new relationship, between me, my S4, and my new home...the S4 community.
Sent from my Nexus 7 using XDA Premium HD app

By the way...since the ROM selection is limited, I assume heavy XPosed use is okay, and quite common?
Which ROM do you guys prefer?
I assume that sites and articles like this one: http://www.droidviews.com/best-custom-roms-for-att-samsung-galaxy-s4-sgh-i337/
aren't reliable sources--they probably don't take into account the the ATT S4 compatibility issues. This is showing CM11, Carbon, KangaBean, Infamous...am I correct in my assumption that those are for the lucky birdies that had MDL/MDB, and didn't need Safestrap?
Has someone put together a compatibility/guide megathread? I think I will if it hasn't been done.
Sent from my Nexus 7 using XDA Premium HD app

Jamesyboy said:
What's SHOStock? An alternative to the ATTMK2Module?
<3 I can see that this is a bangin' start to an awesome and new relationship, between me, my S4, and my new home...the S4 community.
Sent from my Nexus 7 using XDA Premium HD app
Click to expand...
Click to collapse
Welcome aboard!!!! Firstable are u on MF3 firmware or MK2 frimware......? both are using SafeStrap (SS) as custom recovery as of right now. Like i said on previous post MF3 use SS-v3.65 so that u able to install only 4.2.2 TW custom rom or 4.2.2 Google Play Edition (GPE) rom. If u are on MK2 firmware u can only use SS-v3.71 and able to install some of 4.3 custom rom (SHOstock-v3.0-Safestrap-Ready) is one of them that worked......Hyperdrive-RL12 from verizon thread also seem pretty good but u need to add your APN manually if u are on ATT network. Both firmware MF3 and MK2 are use different kernel modules, so after flashing custom Rom you NEED to flash your current firmware kernel modules also, otherwise u won't be able to connect to WiFi,bluetooth,gps etc..... hope this make sense to you......i know is kinda confusing ......but the more u read is the more it would make sense.... Check this thread for list of compatible rom Official AT&T S4 Safestrap Discussion Q/A

One more thing. My S4 will be here tomorrow. Let's say I get lucky and find MDL/MDB on my device. Do I need to hurry and avoid a software update, or avoid a data connection? Or do the updates proceed only with user interaction? The rooting is the same for all 3 devices, but if I do get MDL/MDB or the next one, I'll have to update the baseband before flashing newer ROMs, right?
Sent from my Nexus 7 using XDA Premium HD app

ted77usa said:
Welcome aboard!!!! Firstable are u on MF3 firmware or MK2 frimware......? both are using SafeStrap (SS) as custom recovery as of right now. Like i said on previous post MF3 use SS-v3.65 so that u able to install only 4.2.2 TW custom rom or 4.2.2 Google Play Edition (GPE) rom. If u are on MK2 firmware u can only use SS-v3.71 and able to install some of 4.3 custom rom (SHOstock-v3.0-Safestrap-Ready) is one of them......Hyperdrive-RL12 from verizon thread also seem pretty good but u need to add your APN manually if u are on ATT network. Both firmware MF3 and MK2 are use different kernel modules, so after flashing custom Rom you NEED to flash your cureent firmware kernel modules also otherwise u won't be able to connect to WiFi,bluetooth,gps etc..... hope this make sense to you......i know is kinda confusing ......but the more u read is the more it would make sense....
Click to expand...
Click to collapse
It makes sense, I'm mostly just unfamiliar, as opposed to being completely useless, but you guys have been amazing...you've already shot me up to about 80% on a distribution curve.
Why would anyone stick with MF3? MK2 is an update for MF3, right? Why don't those users update, then safestrap 3.71 it, so they can use 4.3 roms? It'd seem kinda funky to me to be stuck with a 4-2 ROM by choice, unless they're doing it solely for the GPE ROM.
These firmware kernel modules...I'll have the same modules for each ROM I flash right? Or are these modules a .zip that I'll find in each ROM thread, for each carrier.
By the way, APN settings don't scare me. Here, you might actually appreciate this work--done right after ATT's LTE network came online (I believe the Note was the first device that utilized it?...If it wasn't, it was definitely the first to tax the network.)::
http://forum.xda-developers.com/showthread.php?p=26877683
Edit: the Q&A thread for Safe strap was reasonable...but it still talks about kernel flashes, and blown QFusee (har?)
I guess I mainly need to come to grips with the kernel situation. The Q&A says that you can't use custom kernels if you've updated to OTA, but doesn't mention factory MF3 builds, and it isn't really very clear about the module/kernel module situation.
You said I need to flags my **current** firmware kernel modules: are those different if I get a device with MF3 than those for MK2? Or are these just modules that I create myself (based upon whatever's in my stock ROM slot maybe?) in recovery?
Sent from my Nexus 7 using XDA Premium HD app

Jamesyboy said:
One more thing. My S4 will be here tomorrow. Let's say I get lucky and find MDL/MDB on my device. Do I need to hurry and avoid a software update, or avoid a data connection? Or do the updates proceed only with user interaction? The rooting is the same for all 3 devices, but if I do get MDL/MDB or the next one, I'll have to update the baseband before flashing newer ROMs, right?
Sent from my Nexus 7 using XDA Premium HD app
Click to expand...
Click to collapse
I dont think u can get MDB/MDL firmware again these days.....but if u do....damn u are pretty lucky....my suggestion is Do Not insert your ATT sim card yet ....since they can do OTA update ( On The Air ).....and check your baseband....IF u do ....root it right away....install titanium back up and freeze/uninstall ATT software update.apk......install custom recovery CWM or TWRP ..... and make sure u have auto loki recovery....if not save loki.doki patch on your Sd Card....PM me for the link and all the files .....i still have the files since i used to have MDB firmware and got replacement phone from ATT when my son broke the screen....:crying:
Jamesyboy said:
It makes sense, I'm mostly just unfamiliar, as opposed to being completely useless, but you guys have been amazing...you've already shot me up to about 80% on a distribution curve.
Why would anyone stick with MF3? MK2 is an update for MF3, right? Why don't those users update, then safestrap 3.71 it, so they can use 4.3 roms? It'd seem kinda funky to me to be stuck with a 4-2 ROM by choice, unless they're doing it solely for the GPE ROM.
These firmware kernel modules...I'll have the same modules for each ROM I flash right? Or are these modules a .zip that I'll find in each ROM thread, for each carrier.
Sent from my Nexus 7 using XDA Premium HD app
Click to expand...
Click to collapse
MDB>MDL>MF3>MJ6>Mj9>MK2.......the reason of the update is ATT trying to lock bootloader so we won't be able to install custom rom or do what ever we want to the phone.......but either way.....XDA member always found away to cracked it....so some people have to upgrade not by choice.....most of them by accident....like me ( cracked my screen ) or they install wrong recovery.....(bricked) so be careful when installing custom recovery.....like i said....we need to know what kinda firmware that u have so we can help u.....LOL now i got it why u dont know yet....since u dont have the phone yet.......... but is ok.....that's the right thing to do.....get to know your stuff first before u brick your phone.....:good: so basically u need to match your kernel modules with your firmware otherwise it won't be able to connect to Wifi,bluetooth,gps,etc it doesn't matter if u OTA to MF3 or MK2.....or it come with MF3 or MK2....

ted77usa said:
I dont think u can get MDB/MDL firmware again these days.....but if u do....damn u are pretty lucky....my suggestion is Do Not insert your ATT sim card yet ....since they can do OTA update ( On The Air ).....and check your baseband....IF u do ....root it right away....install titanium back up and freeze/uninstall ATT software update.apk......install custom recovery CWM or TWRP ..... and make sure u have auto loki recovery....if not save loki.doki patch on your Sd Card....PM me for the link and all the files .....i still have the files since i used to have MDB firmware and got replacement phone from ATT when my son broke the screen....:crying:
MDB>MDL>MF3>MJ6>Mj9>MK2.......the reason of the update is ATT trying to lock bootloader so we won't be able to install custom rom or do what ever we want to the phone.......but either way.....XDA member always found away to cracked it....so some people have to upgrade not by choice.....most of them by accident....like me ( cracked my screen ) or they install wrong recovery.....(bricked) so be careful when installing custom recovery.....like i said....we need to know what kinda firmware that u have so we can help u.....LOL now i got it why u dont know yet....since u dont have the phone yet.......... but is ok.....that's the right thing to do.....get to know your stuff first before u brick your phone.....:good:
Click to expand...
Click to collapse
Groovy! I'll check back in tomorrow! Happy New Years!
(Sent you a PM, as well.)
Sent from my Nexus 7 using XDA Premium HD app

[Q] ASOP Looking rom with touchwiz kernel

Hello all,
I picked up a Galaxy S4 when ATnt discounted a "certified new" off contract device for $190 a few weeks back.
I upgraded it from my nexus 4 and well.. I just prefer the look of stock android, however the better screen, battery life and LTE are great reasons to upgrade.
I was wondering if there was a 4.4.2 KitKat rom for this device ( SGH-i337 ) that will resemble the look and feel of my Nexus4.
My device has the latest bootloader so the LOKI method will not work
Thanks for the input.
EDIT: my device is rooted with safestrap installed on the latest OTA

koszor said:
Hello all,
I picked up a Galaxy S4 when ATnt discounted a "certified new" off contract device for $190 a few weeks back.
I upgraded it from my nexus 4 and well.. I just prefer the look of stock android, however the better screen, battery life and LTE are great reasons to upgrade.
I was wondering if there was a 4.4.2 KitKat rom for this device ( SGH-i337 ) that will resemble the look and feel of my Nexus4.
My device has the latest bootloader so the LOKI method will not work
Thanks for the input.
EDIT: my device is rooted with safestrap installed on the latest OTA
Click to expand...
Click to collapse
Blackbox 3.0 or Purified/Goldeneye with Domination theme are the closest you can get to AOSP.

Thr33-F0ur said:
Blackbox 3.0 or Purified/Goldeneye with Domination theme are the closest you can get to AOSP.
Click to expand...
Click to collapse
Awesome! I appreciate the fast response I'm going to try them tonight
http://forum.xda-developers.com/showthread.php?t=2429072
will this one work for the i337?

koszor said:
Awesome! I appreciate the fast response I'm going to try them tonight
http://forum.xda-developers.com/showthread.php?t=2429072
will this one work for the i337?
Click to expand...
Click to collapse
Yes. You'll have to goto blackboxroms.com for the download.

koszor said:
Hello all,
I picked up a Galaxy S4 when ATnt discounted a "certified new" off contract device for $190 a few weeks back.
I upgraded it from my nexus 4 and well.. I just prefer the look of stock android, however the better screen, battery life and LTE are great reasons to upgrade.
I was wondering if there was a 4.4.2 KitKat rom for this device ( SGH-i337 ) that will resemble the look and feel of my Nexus4.
My device has the latest bootloader so the LOKI method will not work
Thanks for the input.
EDIT: my device is rooted with safestrap installed on the latest OTA
Click to expand...
Click to collapse
I would also keep an eye on Eclipse rom. It is the only Touchwiz/AOSP hybrid rom that actually has an authentic AOSP pull-down and notification. It also has a whole bunch of AOSP stuff. The kitkat version of the rom will be released soon I think.

4ndroid99 said:
I would also keep an eye on Eclipse rom. It is the only Touchwiz/AOSP hybrid rom that actually has an authentic AOSP pull-down and notification. It also has a whole bunch of AOSP stuff. The kitkat version of the rom will be released soon I think.
Click to expand...
Click to collapse
Every rom I've tried to install leaves me at a blank screen where I have to use Odin to bring my phone back, did I miss something?

koszor said:
Every rom I've tried to install leaves me at a blank screen where I have to use Odin to bring my phone back, did I miss something?
Click to expand...
Click to collapse
Make sure you follow the instructions from this thread.
Scroll down the the 4.4.2 rom section and there is a step by step how-to.
More importantly, make sure you're installing only Touchwiz-based roms, since you're bootloader locked and on safestrap.

4ndroid99 said:
Make sure you follow the instructions from this thread.
Scroll down the the 4.4.2 rom section and there is a step by step how-to.
More importantly, make sure you're installing only Touchwiz-based roms, since you're bootloader locked and on safestrap.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=51067706
I followed that guide, two different Roms both would not boot, I can downgrade to mk2 and have nb1 baseband ...is that the firmware I need to be running to flash the ROM? Or can I be on nc1

koszor said:
http://forum.xda-developers.com/showthread.php?p=51067706
I followed that guide, two different Roms both would not boot, I can downgrade to mk2 and have nb1 baseband ...is that the firmware I need to be running to flash the ROM? Or can I be on nc1
Click to expand...
Click to collapse
What roms did you try?

4ndroid99 said:
What roms did you try?
Click to expand...
Click to collapse
Gravitron and GoldenEye both said safestrap compatible , gravitron booted to a black screen after the phone displays galaxy s4
GoldenEye let me go to safestrap but did not boot at all

koszor said:
Gravitron and GoldenEye both said safestrap compatible , gravitron booted to a black screen after the phone displays galaxy s4
GoldenEye let me go to safestrap but did not boot at all
Click to expand...
Click to collapse
Did you flash the nb1 kernel modules immediately after flashing the rom?

koszor said:
Gravitron and GoldenEye both said safestrap compatible , gravitron booted to a black screen after the phone displays galaxy s4
GoldenEye let me go to safestrap but did not boot at all
Click to expand...
Click to collapse
GoldenEye requires you to replace the updater script, did you do that?

Thr33-F0ur said:
Did you flash the nb1 kernel modules immediately after flashing the rom?
Click to expand...
Click to collapse
yes, and then i booted to odin mode to flash the 3 other files in the BL AP and CP slots
4ndroid99 said:
GoldenEye requires you to replace the updater script, did you do that?
Click to expand...
Click to collapse
im going to try this again, i missed that part

Moderator Edit: Thread about rom with specific features begets replies about roms that are great to try. The roms with the features iterated n the OP are the ones that you discover by looking, reading, comparing, and flashing. Thread closed.

[Q] Updated my AT&T S4 to 5.0.1, what now?

Everything is all good, running stock. I wasn't able to do much other then use odin to update. Now I'm in a pickle. No root and I don't know how to get any kind of recovery installed. So much is out of date that one forum will say something works even though it no longer does. I could maybe use odin to get back to an older version if it doesn't brick, maybe then I can't start over? I need root and I would like to have a CM12 nightly but I don't know where to begin. Is there anything I could do?

You could use guut13's guide found in the general forum. You can have rooted oc3 to remove bloat and do other things, and if you install safestrap while still on 4.4.x, you can use it to do some stuff before you update. But nothing specific to 5.0.1 is available yet.

creepyncrawly said:
You could use guut13's guide found in the general forum. You can have rooted oc3 to remove bloat and do other things, and if you install safestrap while still on 4.4.x, you can use it to do some stuff before you update. But nothing specific to 5.0.1 is available yet.
Click to expand...
Click to collapse
TY. I just needed confirmation that it is possible to go back and start over.

creepyncrawly said:
You could use guut13's guide found in the general forum. You can have rooted oc3 to remove bloat and do other things, and if you install safestrap while still on 4.4.x, you can use it to do some stuff before you update. But nothing specific to 5.0.1 is available yet.
Click to expand...
Click to collapse
I'm in the safestrap recovery can I install CM12 from here?
download cyanogenmod Samsung Galaxy S4 (AT&T) - jflteatt / nightly
Is this the right one, it wont let me add links
I've done a lot of this with a sprint S3 but I never had to deal with a locked bootloader before.

I'm guessing locked bootloader means only modified stock. Is that true? I figured if I could get a recovery on there, then I would be golden.

dannyboone81 said:
I'm in the safestrap recovery can I install CM12 from here?
download cyanogenmod Samsung Galaxy S4 (AT&T) - jflteatt / nightly
Is this the right one, it wont let me add links
I've done a lot of this with a sprint S3 but I never had to deal with a locked bootloader before.
Click to expand...
Click to collapse
No, you can not install cm. You can only use tw based roms.
Sent from my Nexus 9 using XDA Free mobile app

jd1639 said:
No, you can not install cm. You can only use tw based roms.
Sent from my Nexus 9 using XDA Free mobile app
Click to expand...
Click to collapse
What about this?
http://forum.xda-developers.com/showthread.php?t=2537495

dannyboone81 said:
What about this?
http://forum.xda-developers.com/showthread.php?t=2537495
Click to expand...
Click to collapse
See this, http://forum.xda-developers.com/showthread.php?p=53758227. It lists all roms and everything else you'll ever need for your device
Sent from my Nexus 9 using XDA Free mobile app