[Q] Updated my AT&T S4 to 5.0.1, what now? - AT&T Samsung Galaxy S 4 Q&A, Help & Troubleshootin

Everything is all good, running stock. I wasn't able to do much other then use odin to update. Now I'm in a pickle. No root and I don't know how to get any kind of recovery installed. So much is out of date that one forum will say something works even though it no longer does. I could maybe use odin to get back to an older version if it doesn't brick, maybe then I can't start over? I need root and I would like to have a CM12 nightly but I don't know where to begin. Is there anything I could do?

You could use guut13's guide found in the general forum. You can have rooted oc3 to remove bloat and do other things, and if you install safestrap while still on 4.4.x, you can use it to do some stuff before you update. But nothing specific to 5.0.1 is available yet.

creepyncrawly said:
You could use guut13's guide found in the general forum. You can have rooted oc3 to remove bloat and do other things, and if you install safestrap while still on 4.4.x, you can use it to do some stuff before you update. But nothing specific to 5.0.1 is available yet.
Click to expand...
Click to collapse
TY. I just needed confirmation that it is possible to go back and start over.

creepyncrawly said:
You could use guut13's guide found in the general forum. You can have rooted oc3 to remove bloat and do other things, and if you install safestrap while still on 4.4.x, you can use it to do some stuff before you update. But nothing specific to 5.0.1 is available yet.
Click to expand...
Click to collapse
I'm in the safestrap recovery can I install CM12 from here?
download cyanogenmod Samsung Galaxy S4 (AT&T) - jflteatt / nightly
Is this the right one, it wont let me add links
I've done a lot of this with a sprint S3 but I never had to deal with a locked bootloader before.

I'm guessing locked bootloader means only modified stock. Is that true? I figured if I could get a recovery on there, then I would be golden.

dannyboone81 said:
I'm in the safestrap recovery can I install CM12 from here?
download cyanogenmod Samsung Galaxy S4 (AT&T) - jflteatt / nightly
Is this the right one, it wont let me add links
I've done a lot of this with a sprint S3 but I never had to deal with a locked bootloader before.
Click to expand...
Click to collapse
No, you can not install cm. You can only use tw based roms.
Sent from my Nexus 9 using XDA Free mobile app

jd1639 said:
No, you can not install cm. You can only use tw based roms.
Sent from my Nexus 9 using XDA Free mobile app
Click to expand...
Click to collapse
What about this?
http://forum.xda-developers.com/showthread.php?t=2537495

dannyboone81 said:
What about this?
http://forum.xda-developers.com/showthread.php?t=2537495
Click to expand...
Click to collapse
See this, http://forum.xda-developers.com/showthread.php?p=53758227. It lists all roms and everything else you'll ever need for your device
Sent from my Nexus 9 using XDA Free mobile app

Related

MF3 stock firmware question - Don't bash

First let me say I'm not a noob.. I'm a developer but don't really deal with rooting, etc. So please don't bash...
I tried searching for answers to this question, but couldn't find an exact one..
I have the AT&T S4 with the MF3 OTA update. I want to try and install a custom rom, but in reading the hot to's, it says not to attempt to do it with the mf3 update since it's boot locked. Can I re-install a stock S4 firmware using odin and then, after a stock firmware is installed, then install twrp with a custom rom?
Thanks!
itsdavetime said:
First let me say I'm not a noob.. I'm a developer but don't really deal with rooting, etc. So please don't bash...
I tried searching for answers to this question, but couldn't find an exact one..
I have the AT&T S4 with the MF3 OTA update. I want to try and install a custom rom, but in reading the hot to's, it says not to attempt to do it with the mf3 update since it's boot locked. Can I re-install a stock S4 firmware using odin and then, after a stock firmware is installed, then install twrp with a custom rom?
Thanks!
Click to expand...
Click to collapse
No.
scott14719 said:
No.
Click to expand...
Click to collapse
Ha.. Well, that's an exact answer
There is a method in the works on the VZW forums that will allow custom ROMs on locked bootloaders. We are hoping to get it ported over the our side. Things are looking very promising. This method, known as a safestrap, will also allow multiple ROMs at once. Up to 4 slots. It keeps your stock ROM safe so if you have a bad flash, you can still boot right back and have a functional phone. You are only limited by how much space you have on your internal SD.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
itsdavetime said:
Ha.. Well, that's an exact answer
Click to expand...
Click to collapse
graydiggy said:
There is a method in the works on the VZW forums that will allow custom ROMs on locked bootloaders. We are hoping to get it ported over the our side. Things are looking very promising. This method, known as a safestrap, will also allow multiple ROMs at once. Up to 4 slots. It keeps your stock ROM safe so if you have a bad flash, you can still boot right back and have a functional phone. You are only limited by how much space you have on your internal SD.
Sent from my SAMSUNG-SGH-I337 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Until then, OP, my advise is to just roll on stock/unrooted. Period.
Cheers

Can I install cm 11 or a stock kitkat rom that does not have touchwiz on my NB1?

I have a att s4 sgh-1337 with android 4.4.2. baseband version 1337UCUFNB1. I'm trying to put on CM 11. or another rom that looks like stock android with no touchwiz and 100% working and stable. if I downgrade to android 4.3. can I then root, install CWM recovery, and install CM 11?
what would happen if I booted into android system recovery and installed the cm 11 rom for my phone?
Gabe3 said:
I have a att s4 sgh-1337 with android 4.4.2. baseband version 1337UCUFNB1. I'm trying to put on CM 11. or another rom that looks like stock android with no touchwiz and 100% working and stable. if I downgrade to android 4.3. can I then root, install CWM recovery, and install CM 11?
what would happen if I booted into android system recovery and installed the cm 11 rom for my phone?
Click to expand...
Click to collapse
Short answer: No. You'll void your warranty and bootloop.
As for 'stock android look', I can recommend PurifieD or Google Play Edition ROM although it has a few bug that I'm going to work on once this semester ends..
Gabe3 said:
I have a att s4 sgh-1337 with android 4.4.2. baseband version 1337UCUFNB1. I'm trying to put on CM 11. or another rom that looks like stock android with no touchwiz and 100% working and stable. if I downgrade to android 4.3. can I then root, install CWM recovery, and install CM 11?
what would happen if I booted into android system recovery and installed the cm 11 rom for my phone?
Click to expand...
Click to collapse
No CM for now. You cannot replace the stock recovery. The only working recovery we have is safestrap.
You can use DVKM Tool and install BlackBox3.0 (Check post 3 of All things ATT thread)
thanks. hm, don't know what I should do. I bought this phone last week used on ebay so I dont think I have a warranty to void. another reason I wanted CM is so i could easily get updates. I dont really want to be messing with roms all the time. do you guys think cm will work soon? in the next few months? maybe I should stick with what I have till that happens. I'd rather wait for that then cause my self more headache.
does PurifieD come with the stock kitkat widgets?
Gabe3 said:
in the next few months? maybe I should stick with what I have till that happens. I'd rather wait for that then cause my self more headache.
does PurifieD come with the stock kitkat widgets?
Click to expand...
Click to collapse
No, probably not. The i337s bootloader is locked so we can't flash kernels. A lot of devs have moved onto newer devices so I doubt anything new will happen. And I'm not sure what the stock kitkat widgets are.
Rhymey said:
No, probably not. The i337s bootloader is locked so we can't flash kernels. A lot of devs have moved onto newer devices so I doubt anything new will happen. And I'm not sure what the stock kitkat widgets are.
Click to expand...
Click to collapse
what android version would the i337 need to have to be able to install cm 11? 4.2.x ? I'm thinking of asking the guy I bought mine from to see if he has any others that still have an older android version that would let me install cm on.
Gabe3 said:
what android version would the i337 need to have to be able to install cm 11? 4.2.x ? I'm thinking of asking the guy I bought mine from to see if he has any others that still have an older android version that would let me install cm on.
Click to expand...
Click to collapse
You'd need 4.2.2, mdb or mdl bootloader and firmware
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
You'd need 4.2.2, mdb or mdl bootloader and firmware
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
in about device. is baseband version the firmware and build number the bootloader?
thanks.
Gabe3 said:
in about device. is baseband version the firmware and build number the bootloader?
thanks.
Click to expand...
Click to collapse
no. download 'phone info samsung' off the appstore and it'll tell you your bootloader version
Rhymey said:
no. download 'phone info samsung' off the appstore and it'll tell you your bootloader version
Click to expand...
Click to collapse
ok thanks. and baseband version is firmware?
will the att update automatically install if I connect to wifi?
Yes, it'll update on its own unless you root and delete or freeze the system update app.
Sent from my SGH-I337 using XDA Free mobile app
Thr33-F0ur said:
Yes, it'll update on its own unless you root and delete or freeze the system update app.
Sent from my SGH-I337 using XDA Free mobile app
Click to expand...
Click to collapse
hm. Im not sure how to have the seller check for me then. if the phone has android 4.2.2, it should be on mdb or mdl, right?
Or it might have MF3. To find out, just go into Settings > About Phone (if the phone is complete stock unrooted, then the build number/baseband should match the boot loader)
Sent from my SGH-I337 using XDA Free mobile app
Thr33-F0ur said:
Or it might have MF3. To find out, just go into Settings > About Phone (if the phone is complete stock unrooted, then the build number/baseband should match the boot loader)
Sent from my SGH-I337 using XDA Free mobile app
Click to expand...
Click to collapse
ok, thanks. i dont think the seller knows if its stock. if the phone got connected to the internet and updated automatically would the android version number change and baseband/build numbers?
Gabe3 said:
ok, thanks. i dont think the seller knows if its stock. if the phone got connected to the internet and updated automatically would the android version number change and baseband/build numbers?
Click to expand...
Click to collapse
yes. that's exactly what updating does.

[Q] [QP] Can I flash roms?

Hi all, I am fairly new to this whole rooting process for android devices, since i have just recently purchased a galaxy s4 from at&t. Just a few days ago, i've decided to root my device, and after hours of researching i came across geohot's towelroot program and successfully rooted my GS4!. Now i want to install a custom rom, and i would like to know what kind of custom recovery can i use? and am i able to install the cyanogenmod 11? I have downloaded the cyanogenmod installer and it says my device is not supported, but i read on their wiki that i can install it manually but i don't know if my current build is supported by Clockworkmod, or even TWRP for that matter. I havn't flashed any roms by the way and i don't plan on doing so until i am almost certain that i can flash it without bricking.
I am running kitkat 4.4.2 Samsung SGH-I337, my baseband/build number is I337UCUFNC1
Any help would be greatly appreciated thanks!
We have a locked bootloader. So, stock kernel and recovery cannot be replaced. The only recovery we have is safestrap.
http://forum.xda-developers.com/showthread.php?t=2616221
Ahh that sucks thanks for the info. Hopefully they will find a way to unlock it in the future so I can install the cyanogenmod.
Sent from my SAMSUNG-SGH-I337 using XDA Free mobile app
Soulflame22 said:
Ahh that sucks thanks for the info. Hopefully they will find a way to unlock it in the future so I can install the cyanogenmod.
Sent from my SAMSUNG-SGH-I337 using XDA Free mobile app
Click to expand...
Click to collapse
Lots of info in General on what you can do--it is not too bad--:good:
rugmankc said:
Lots of info in General on what you can do--it is not too bad--:good:
Click to expand...
Click to collapse
Yea, i will look in to it. But I am going to do more research before actually flashing a rom, Better safe than sorry haha
Soulflame22 said:
Yea, i will look in to it. But I am going to do more research before actually flashing a rom, Better safe than sorry haha
Click to expand...
Click to collapse
☺
Sent From My Samsung Galaxy S4

ATT S4 KitKat 4.4.2 - Is Cyanogenmod possible? alts...

Hi All,
Appreciate the guides and community here. Looking for a little help on my ATT S4 KitKat 4.4.2. It's rooted via Towelroot.
I want to run a custom rom that isn't slow. I have Odin, proper Samsung USB drivers.
1) Can CNW be used on my phone to boot to recovery? If not, what are the alternatives and how do I use them (is there a guide you can share)?
2) Do I have NC1 on my phone, what the heck is NC2, NC1-what does this mean, is it relevant?
Thanks all
-Christian
If you have updated your phone to the att 4.4.2 firmware then you should be on NC1 which means you cannot put cwm or any CM rom. The only recovery you can use is safestrap. After that you can only flash rooms the specifically say safestrap compatible and you must flash the att_nc1 module after flashing rom for WiFi to work. Read the safestrap thread under the development section before doing anything.
Sent from my GT-P3110 using Tapatalk
Thanks for the help-trying it out now. Will keep ya posted
freestylejunki32 said:
If you have updated your phone to the att 4.4.2 firmware then you should be on NC1 which means you cannot put cwm or any CM rom. The only recovery you can use is safestrap. After that you can only flash rooms the specifically say safestrap compatible and you must flash the att_nc1 module after flashing rom for WiFi to work. Read the safestrap thread under the development section before doing anything.
http://forum.xda-developers.com/showthread.php?t=2572978
Sent from my GT-P3110 using Tapatalk
Click to expand...
Click to collapse
Is this the thread you were referring to?
http://forum.xda-developers.com/showthread.php?t=2572978
Yes, I would also read over All Things ATT/MK2 etc in General--:good:
Those numbers NC1 etc are your build version. Can be found under Settings/About Phone. It will dictate what you can and can't do on your phone--We have no NC2 yet. :good:
rugmankc said:
Yes, I would also read over All Things ATT/MK2 etc in General--:good:
Those numbers NC1 etc are your build version. Can be found under Settings/About Phone. It will dictate what you can and can't do on your phone--We have no NC2 yet. :good:
Click to expand...
Click to collapse
Thanks. I have nb1. No luck getting safe strap to take. Install completes but does not recognize status as installed or allow boot to recovery.
I have rooted, supersu, busybox, and no luck with safestrap. Any ideas.
Upon booting I notice an icon that looks like a unlocked lock beneath the samsung logo. Touching it does nothing...
Thanks for getting back to me
potat5656 said:
Thanks. I have nb1. No luck getting safe strap to take. Install completes but does not recognize status as installed or allow boot to recovery.
I have rooted, supersu, busybox, and no luck with safestrap. Any ideas.
Upon booting I notice an icon that looks like a unlocked lock beneath the samsung logo. Touching it does nothing...
Thanks for getting back to me
Click to expand...
Click to collapse
I don't use safestrap. So not sure. Did you wipe all including system. And flash to correct slot. Stock slot I believe. Use correct safestrap. Also need sellinux, spelling? The lock is suppose to be there if rooted. Read the last 20 pages of the hash code safestrap thread plus the op. And same on All Things ATT/MK2 in General. May give some ideas. ☺
Sent from my GT-I9505G using Tapatalk
rugmankc said:
I don't use safestrap. So not sure. Did you wipe all including system. And flash to correct slot. Stock slot I believe. Use correct safestrap. Also need sellinux, spelling? The lock is suppose to be there if rooted. Read the last 20 pages of the hash code safestrap thread plus the op. And same on All Things ATT/MK2 in General. May give some ideas. ☺
Sent from my GT-I9505G using Tapatalk
Click to expand...
Click to collapse
Aha! Safestrap running and custom ROM installed. Is there an index comparing all Safestrap/Touchwiz based roms? Runnign SHO right now and it's pretty bland (resolution looks low too).
I'm looking for something like a stock nexus experience with WiFi tethering.
thanks for the help mates
potat5656 said:
Aha! Safestrap running and custom ROM installed. Is there an index comparing all Safestrap/Touchwiz based roms? Runnign SHO right now and it's pretty bland (resolution looks low too).
I'm looking for something like a stock nexus experience with WiFi tethering.
thanks for the help mates
Click to expand...
Click to collapse
Not sure on index. Best though to try them yourself as they don't always work the same on different phones.
Sent from my GT-I9505G using Tapatalk
potat5656 said:
Aha! Safestrap running and custom ROM installed. Is there an index comparing all Safestrap/Touchwiz based roms? Runnign SHO right now and it's pretty bland (resolution looks low too).
I'm looking for something like a stock nexus experience with WiFi tethering.
thanks for the help mates
Click to expand...
Click to collapse
Iam all for custom ROMS. I made one for the Tab3. If all you want is the stock Nexus experience, you could just download the Google Now Launcher which is Google release the AOSP launcher. Then if you want the individual AOSP apps, you can do a search here or a google search, and you will find XDA threads that provide the apps with installation instructions.

Battery Drain galaxy s4 att

Ever since I got the KitKat 4.4.4 update my battery has been draining, and I'm not going to get a new battery because I've only had this phone for a short time[emoji27]
Give it a few days, it should improve. If not, you may want to root and install the Greenify app from the Play Store.
StoneyJSG said:
Give it a few days, it should improve. If not, you may want to root and installed the Greenify app from the Play Store.
Click to expand...
Click to collapse
I'll try it, and I'm also going to get cm 12 on it since it's taking Samsung a long time to update it
itzdajosh said:
I'll try it, and I'm also going to get cm 12 on it since it's taking Samsung a long time to update it
Click to expand...
Click to collapse
If you have the at&t sgh-i337 and it's on Android 4.4.4, then you won't be able to install cm 12 due to the locked bootloader. You're only able to boot TW based roms from Safe Strap.
No your right and wrong because twrp recovery already has Loki built into it..
itzdajosh said:
No your right and wrong because twrp recovery already has Loki built into it..
Click to expand...
Click to collapse
no, he's right. no twrp for you
Sent from my Nexus 5 using XDA Free mobile app
jd1639 said:
no, he's right. no twrp for you
Sent from my Nexus 5 using XDA Free mobile app
Click to expand...
Click to collapse
Go to twrps website and click recovery for jflteatt and look at device specific issues and it clearly states that "our images are already modified with Loki"
itzdajosh said:
Go to twrps website and click recovery for jflteatt and look at device specific issues and it clearly states that "our images are already modified with Loki"
Click to expand...
Click to collapse
If you have mdl firmware, yes. But you don't. Safestrap is the only recovery that's going to work and no, cm. Trust me
Sent from my Nexus 5 using XDA Free mobile app
itzdajosh said:
No your right and wrong because twrp recovery already has Loki built into it..
Click to expand...
Click to collapse
itzdajosh said:
Go to twrps website and click recovery for jflteatt and look at device specific issues and it clearly states that "our images are already modified with Loki"
Click to expand...
Click to collapse
LOKI will only work on the MDL firmware running Android 4.2.2 Jelly Bean. You're on 4.4.4 so LOKI won't work. Go ahead and try, it will fail.
Oh well I'll just be stuck like this but I'll try to find a way how to make it work
itzdajosh said:
Oh well I'll just be stuck like this but I'll try to find a way how to make it work
Click to expand...
Click to collapse
Good luck and remember Odin, you'll need it.
Sent from my Nexus 5 using XDA Free mobile app
So your saying that Odin will be able to flash cm12 without Loki? And dose Loki work on 4.4.4??
itzdajosh said:
So your saying that Odin will be able to flash cm12 without Loki? And dose Loki work on 4.4.4??
Click to expand...
Click to collapse
no, I'm saying trying to flash twrp and/or cm and you'll probably need Odin
Sent from my Nexus 5 using XDA Free mobile app
Why?? If wwjoshdew made a video on how to root and install a custom recovery on all Qualcomm variants for example jflteatt he didn't say anything about KitKat wouldn't work with Loki...
itzdajosh said:
Why?? If wwjoshdew made a video on how to root and install a custom recovery on all Qualcomm variants for example jflteatt he didn't say anything about KitKat wouldn't work with Loki...
Click to expand...
Click to collapse
Trust us dude, LOKI won't work on Android 4.4.4 on the sgh-i337. It was a bootloader bypass that was patched when the mk2 firmware OTA update came out. If you try flashing a custom recovery you risk bricking your phone since the bootloader is locked. The only recovery you can use is Safe Strap.
If you want CyanogenMOD or any other roms of the alike such as AOSP based roms, you will need a at&t Galaxy S3 or an international S4 or if I remember right a sprint or t-mobile S4, (don't quote me on though) they have unlocked bootloaders as far as I know.
StoneyJSG said:
Trust us dude, LOKI won't work on Android 4.4.4 on the sgh-i337. It was a bootloader bypass that was patched when the mk2 firmware OTA update came out. If you try flashing a custom recovery you risk bricking your phone since the bootloader is locked. The only recovery you can use is Safe Strap.
If you want CyanogenMOD or any other roms of the alike such as AOSP based roms, you will need a Galaxy S3. It has an unlocked bootloader.
Click to expand...
Click to collapse
Well alright I did a bit of research myself and you guys are right.. Thanks for the help so I wouldn't brick my galaxy s4![emoji2] I think I'm going to get the lg g2 for custom roms and stuff...
Sent from my SAMSUNG-SGH-I337 using Tapatalk
No problemo, glad to help when I can. Thanks for the PM by the way lol.

Categories

Resources