[Q] Graviton ROM S4 i337 - AT&T Samsung Galaxy S 4 Q&A, Help & Troubleshootin

Hey Forum,
I installed Graviton ROM for AT&T S4 using Safestrap but once everything finished, it went into a bootloop with a blue snake spinning endlessly with "Graviton" in the center. Anyone have any ideas?

sympathizer said:
Hey Forum,
I installed Graviton ROM for AT&T S4 using Safestrap but once everything finished, it went into a bootloop with a blue snake spinning endlessly with "Graviton" in the center. Anyone have any ideas?
Click to expand...
Click to collapse
Please provide more information.
- What bootloader do you have? Did you ever take NB1 OTA?
- What version of Graviton are you flashing?
- What version of safestrap do you have?
- If you are flashing kitkat version, are you following the Deadly Venom Tool?
The more information you provide, the easier it will be to assist.

sympathizer said:
Hey Forum,
I installed Graviton ROM for AT&T S4 using Safestrap but once everything finished, it went into a bootloop with a blue snake spinning endlessly with "Graviton" in the center. Anyone have any ideas?
Click to expand...
Click to collapse
1) Did you wipe data?
2) Did you install the specific Safestrap version?

jmjoyas said:
Please provide more information.
- What bootloader do you have? Did you ever take NB1 OTA?
- What version of Graviton are you flashing?
- What version of safestrap do you have?
- If you are flashing kitkat version, are you following the Deadly Venom Tool?
The more information you provide, the easier it will be to assist.
Click to expand...
Click to collapse
4.4.2 NB1
"Graviton_S4_v3.0_20140502_SafeStrap"
Safestrap v3.72
Yes, I followed the Deadly Venom Kitkat Magic Tool
DeadlySin9 said:
1) Did you wipe data?
2) Did you install the specific Safestrap version?
Click to expand...
Click to collapse
Yes, I installed the 3.72 version of Safestrap

sympathizer said:
4.4.2 NB1
"Graviton_S4_v3.0_20140502_SafeStrap"
Safestrap v3.72
Yes, I followed the Deadly Venom Kitkat Magic Tool
Yes, I installed the 3.72 version of Safestrap
Click to expand...
Click to collapse
Did you flash AT&TNB1KernelModules.zip (file present in the tool extract) along with the ROM? After the rom flash and before phone rebooted, did you put the phone in download mode and flash the NB1 ap/bl/cp files from the tool?
Also, only stock slot in safestrap works for kitkat.
If you have done all these, please provide the exact step by step operations you have done.

jmjoyas said:
Did you flash AT&TNB1KernelModules.zip (file present in the tool extract) along with the ROM? After the rom flash and before phone rebooted, did you put the phone in download mode and flash the NB1 ap/bl/cp files from the tool?
Also, only stock slot in safestrap works for kitkat.
If you have done all these, please provide the exact step by step operations you have done.
Click to expand...
Click to collapse
I'm running 4.4.2 ATT NB1 stock rooted rom. I have Safestrap 3.72 downloaded, and Graviton_S4_v3.0_20140502_SafeStrap.zip as well as the AT&TNB1KernelModules.zip. I reboot into recovery click install (on stock rom slot) and add the Graviton_S4_v3.0_20140502_SafeStrap and AT&TNB1KernerlModules zips and flash. After it fully successfully finished, I click home and boot into download mode where I flash the ap/bl/cp files from the Deadly Venom KitKat Magic Tool. It then reboots, and after the Samsung custom(with the lock), it fully goes black.

sympathizer said:
I'm running 4.4.2 ATT NB1 stock rooted rom. I have Safestrap 3.72 downloaded, and Graviton_S4_v3.0_20140502_SafeStrap.zip as well as the AT&TNB1KernelModules.zip. I reboot into recovery click install (on stock rom slot) and add the Graviton_S4_v3.0_20140502_SafeStrap and AT&TNB1KernerlModules zips and flash. After it fully successfully finished, I click home and boot into download mode where I flash the ap/bl/cp files from the Deadly Venom KitKat Magic Tool. It then reboots, and after the Samsung custom(with the lock), it fully goes black.
Click to expand...
Click to collapse
Did you wipe data anywhere in there? If not, do that. If you did, Gravitron does seem to take longer to boot first time than other ROMs so give it time.

DeadlySin9 said:
Did you wipe data anywhere in there? If not, do that. If you did, Gravitron does seem to take longer to boot first time than other ROMs so give it time.
Click to expand...
Click to collapse
But how long?

Its always best to do a clean wipe (everything except sdcard in advanced wipe of safestrap) before flashing another rom
Sent from my Venue 8 3830 using Tapatalk

​
jmjoyas said:
Its always best to do a clean wipe (everything except sdcard in advanced wipe of safestrap) before flashing another rom
Sent from my Venue 8 3830 using Tapatalk
Click to expand...
Click to collapse
I did that too. Can you please explain it step-by-step?

AOSP lockscreen
@upndwn4par
I have been using this rom for a while on my att s4 . I recently checked out the eclipse rom (http://forum.xda-developers.com/showthread.php?t=2351840) . Due to some problems of that rom i changed back to Graviton. One thing i really liked in Eclipse is the stock lockscree. Is there any way to add that in this rom? i tried to post the question in the rom devlopment post but couldn't. Any guide on how to do that?
Thanks

max420420 said:
@upndwn4par
I have been using this rom for a while on my att s4 . I recently checked out the eclipse rom (http://forum.xda-developers.com/showthread.php?t=2351840) . Due to some problems of that rom i changed back to Graviton. One thing i really liked in Eclipse is the stock lockscree. Is there any way to add that in this rom? i tried to post the question in the rom devlopment post but couldn't. Any guide on how to do that?
Thanks
Click to expand...
Click to collapse
There is a guide by didact74 in the VZW section, but I don't think that has been updated for KitKat. There are Xposed modules that do the same thing.

upndwn4par said:
There is a guide by didact74 in the VZW section, but I don't think that has been updated for KitKat. There are Xposed modules that do the same thing.
Click to expand...
Click to collapse
Thank you so much for your reply!!!
I checked his guide..... Those steps are far beyond my ability :crying: Most i can do is flash zip files and editing build prop :laugh:
I tried his flashable zip file . That didnt work. I think that only works with stock rom. I tried xposed module . didnt work either :crying:
If it's not too much to ask. is there any chance you can make a flashable zip specific for your rom? :good::good::good:
Thank you again!!!!!!!!

max420420 said:
Thank you so much for your reply!!!
I checked his guide..... Those steps are far beyond my ability :crying: Most i can do is flash zip files and editing build prop :laugh:
I tried his flashable zip file . That didnt work. I think that only works with stock rom. I tried xposed module . didnt work either :crying:
If it's not too much to ask. is there any chance you can make a flashable zip specific for your rom? :good::good::good:
Thank you again!!!!!!!!
Click to expand...
Click to collapse
I always had that mod in Graviton, but no one seemed to use it. I kinda miss it as an option, so I'll add it to the next update.

upndwn4par said:
I always had that mod in Graviton, but no one seemed to use it. I kinda miss it as an option, so I'll add it to the next update.
Click to expand...
Click to collapse
This rom will best rom then! already best for me. Waiting for next update!!!:good::good:

upndwn4par said:
I always had that mod in Graviton, but no one seemed to use it. I kinda miss it as an option, so I'll add it to the next update.
Click to expand...
Click to collapse
Hey!!! checked the new relese! it was awesome. btw gravity box hold for torch and double tap to turn screen of is not working. any thought?

Related

[Q] Compatible roms?

I've search but maybe someone can point me in the right direction. I am wondering which Rom would be compatible with my phone. What exactly am I looking for in the description to know if it will work. My phone is rooted and has Safestrap installed. Sorry if this has been discussed already.
Android Version
4.3
Baseband Version
I337UCUEMJ9
Build
JSS15J.I337UCUEMJ9
vandeec5 said:
I've search but maybe someone can point me in the right direction. I am wondering which Rom would be compatible with my phone. What exactly am I looking for in the description to know if it will work. My phone is rooted and has Safestrap installed. Sorry if this has been discussed already.
Android Version
4.3
Baseband Version
I337UCUEMJ9
Build
JSS15J.I337UCUEMJ9
Click to expand...
Click to collapse
You need to update to MK2 4.3 first.
AT&T Galaxy S4 SGH-I337 RUNNING HYPERDRIVE 12
[email protected] said:
You need to update to MK2 4.3 first.
AT&T Galaxy S4 SGH-I337 RUNNING HYPERDRIVE 12
Click to expand...
Click to collapse
Thanks!! I searched all morning, is there a guide available? Im sure I have to update through Odin?
vandeec5 said:
Thanks!! I searched all morning, is there a guide available? Im sure I have to update through Odin?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=48927617
Download MJ9>MK2 zip, follow instructions in the second post.
If you want to keep root and just save a second in not having to root again, use the SuperSU survival mode.
DeadlySin9 said:
http://forum.xda-developers.com/showthread.php?p=48927617
Download MJ9>MK2 zip, follow instructions in the second post.
If you want to keep root and just save a second in not having to root again, use the SuperSU survival mode.
Click to expand...
Click to collapse
Awesome! I'm rooted with MK2. So maybe you can help me with one more.
I am trying to install Cyanogen so I did the following
From Recovery
Boot Options
Rom-Slot-1 Selected
Wipe
Install Cyanogen
When I reboot, I get nothing..
I am installing the latest nightly of Cyanogen.
From my understanding that is an aosp rom and safe strap does not support those kind of roms yet. Safe strap for 4.3 is fairly new and there is not many roms compatible yet. Pol have been having different results with roms
vandeec5 said:
Awesome! I'm rooted with MK2. So maybe you can help me with one more.
I am trying to install Cyanogen so I did the following
From Recovery
Boot Options
Rom-Slot-1 Selected
Wipe
Install Cyanogen
When I reboot, I get nothing..
I am installing the latest nightly of Cyanogen.
Click to expand...
Click to collapse
Cyanogen and other AOSP ROM's do not work. Only some 4.3 TW ROM's are working at this point.
DeadlySin9 said:
Cyanogen and other AOSP ROM's do not work. Only some 4.3 TW ROM's are working at this point.
Click to expand...
Click to collapse
Awesome thanks for the information
DVSS-EDITION-v1.3.8-ML6
vandeec5 said:
Awesome! I'm rooted with MK2. So maybe you can help me with one more.
I am trying to install Cyanogen so I did the following
From Recovery
Boot Options
Rom-Slot-1 Selected
Wipe
Install Cyanogen
When I reboot, I get nothing..
I am installing the latest nightly of Cyanogen.
Click to expand...
Click to collapse
Deadly Venom SS Edition is out for MK2 with SS v3.71 users ....Link and guide at Post #4 DVSS_EDITION_ML6 ..... ShOstock_v3.0 also work..... Darthstalker X ....and HyperDrive RL 12 also worked.....Goodluck.....:good: ....:good:
Swyped from MK2 Deadly Venom SS
Vision X also works....
TheAxman said:
Vision X also works....
Click to expand...
Click to collapse
Is it safestrap compatible mk2 4.3?
AT&T Galaxy S4 SGH-I337 RUNNING HYPERDRIVE 12
TheAxman said:
Vision X also works....
Click to expand...
Click to collapse
Another rom added to the MK2 SS compatible list. ...... awesome. ... Can't wait to try Venomous X bro. .... collaboration of two great rom. ....
Swyped from MK2 Deadly Venom SS

[Q] Help? Galaxy S4 i337 can't boot TWRPs or CWM

Hey!
I recently rooted my GS4 i337. Everything is all working as of now. However, I want to flash an AOSP ROM onto it. So, I followed instructions and at first, I flashed TWRP to my phone. It said it was successful, but when I go to recovery it puts me in ODIN. I then uninstalled TWRP and got the latest version that is said to support i337 GS4. Flashed successfully, but when I boot it still goes ODIN.
I tried both manually recovery booting with the buttons, and the UI on the actual app. Boots ODIN both ways.
Is there something I'm doing wrong? How can I boot into TWRP or CWM so I can make a quick ROM backup and flash an AOSP ROM?
Cheers! And if this is the wrong section, can a moderator please move it? I'm new to this forum.
Thanks. :laugh:
Check your firmware version then do a lot of reading.
jd1639 said:
Check your firmware version then do a lot of reading.
Click to expand...
Click to collapse
Explain please?
nhannon9 said:
Explain please?
Click to expand...
Click to collapse
Unless your on mdl firmware you can't flash twrp or cwm. I'm guessing you're not.
jd1639 said:
Unless your on mdl firmware you can't flash twrp or cwm. I'm guessing you're not.
Click to expand...
Click to collapse
Don't think so, my baseband is UCUEMK2 on 4.3. So, there's no way to get any custom ROMs on this? What can I do so I can?
nhannon9 said:
Don't think so, my baseband is UCUEMK2 on 4.3. So, there's no way to get any custom ROMs on this? What can I do so I can?
Click to expand...
Click to collapse
Google i337 safestrap mk2 xda
jd1639 said:
Google i337 safestrap mk2 xda
Click to expand...
Click to collapse
I found this a video on how to use Safestrap on 4.3.
It's for the Verizon variant but the SE Linux matches, can I give Safestrap a shot?
EDIT: Scratch that, I've found an ATT compatible version (3.71) and it booted into it perfectly! Now I can backup my stock ROM real quick and flash on my new one! Thanks!!

[Q] Help!!! Flashed my S4 to Danvdh GE 4.4.2 and it keeps rebooting!!!

First of all, thanks for reading this...
Here goes the story. I have a Galaxy S4 SGH-I337 AT&T. Yesterday I updated to 4.4.2 OTA. The idea of flashing to google edition ROM came into my mind so I did some research. I found 4.4.2 with NB1 baseband cannot be rooted and it has to downgrade to 4.3 first. So I followed this link:
[NB1►DOWNGRADE★UPDATE◄MK2] ★ [NB1 FULL ODIN] ★ [100% SS ROOTED STOCK] ★ [Mar.23.2014]
http://forum.xda-developers.com/showthread.php?t=2663545
to do so. Everything worked fine. I installed Safestrap-v3.71. Then, I downloaded GOOGLE EDITION 4.4.2 BY Danvdh from (http://forum.xda-developers.com/showthread.php?t=2537495) and followed this link:
http://www.teamandroid.com/2014/01/...42-kitkat-danvdh-google-edition-custom-rom/2/
to install Danvdh GE 4.4.2. The post said it needs CWM however I was unable to install CWM on my phone so I assume Safestrap should work the same. I used Safestrap to install the zip and got a successful message.
HOWEVER, when I reboot the phone, it just keeps rebooting (i.e., power on, Samsung logo, black, vibrate and reboot again)!!
Please help!!
Oh, I did not flash Loki doki. Is that causing the problem???
I don't think that rom will work with ss. If you have an i337 I think you need a mdl firmware.
Edit, looking at the rom I know it won't work with ss.
Edit, see this http://forum.xda-developers.com/showthread.php?p=49562527
Sent from my Nexus 5
jd1639 said:
I don't think that rom will work with ss. If you have an i337 I think you need a mdl firmware.
Edit, looking at the rom I know it won't work with ss.
Edit, see this http://forum.xda-developers.com/showthread.php?p=49562527
Sent from my Nexus 5
Click to expand...
Click to collapse
OK... if that doesn't work, is there a pure 4.4.2 Android ROM that works with my phone?
Glad I have Safestrap installed and just bought a microSD card reader. I'll try to flash the ROMs from that list...
jd1639 said:
I don't think that rom will work with ss. If you have an i337 I think you need a mdl firmware.
Edit, looking at the rom I know it won't work with ss.
Edit, see this http://forum.xda-developers.com/showthread.php?p=49562527
Sent from my Nexus 5
Click to expand...
Click to collapse
Oh, just realize by "ss" you mean Safestrap?
Given my phone's current status, is there a way to install this ROM? Flash with stock ROM and try to install CWM?
wangweixun said:
Oh, just realize by "ss" you mean Safestrap?
Given my phone's current status, is there a way to install this ROM? Flash with stock ROM and try to install CWM?
Click to expand...
Click to collapse
Yes, safestrap. You can not install cwm on your device. You can only use ss and touch wiz based roms. You might have to Odin back to mk2 and start over
Sent from my Nexus 5
jd1639 said:
Yes, safestrap. You can not install cwm on your device. You can only use ss and touch wiz based roms. You might have to Odin back to mk2 and start over
Sent from my Nexus 5
Click to expand...
Click to collapse
Thanks. That is sad .
My device won't boot now so Odin is not possible I assume? I'm trying to use ss to install the "I337UCUFNB1 100% Stock Rooted ROM" and start from there. Am I on the right track?
wangweixun said:
Thanks. That is sad .
My device won't boot now so Odin is not possible I assume? I'm trying to use ss to install the "I337UCUFNB1 100% Stock Rooted ROM" and start from there. Am I on the right track?
Click to expand...
Click to collapse
I would flash the all in one tar from from this http://forum.xda-developers.com/showthread.php?p=49687770
Sent from my Nexus 5
jd1639 said:
I would flash the all in one tar from from this http://forum.xda-developers.com/showthread.php?p=49687770
Sent from my Nexus 5
Click to expand...
Click to collapse
Sorry I'm a newbie but...
1. what is that all in one tar for? Is it a ROM?
2. my device won't boot so I could not use Odin. The only thing I can use is SS. Is there a workaround?
wangweixun said:
Sorry I'm a newbie but...
1. what is that all in one tar for? Is it a ROM?
2. my device won't boot so I could not use Odin. The only thing I can use is SS. Is there a workaround?
Click to expand...
Click to collapse
Your device only boots into ss? Can you boot into download mode? Power, home, vol down
Sent from my SAMSUNG-SGH-I727
jd1639 said:
Your device only boots into ss? Can you boot into download mode? Power, home, vol down
Sent from my SAMSUNG-SGH-I727
Click to expand...
Click to collapse
Actually, I am able to get into download mode.
I'm downloading the full odin tar files file however... I still could not understand what it is. Is it the MK2 ROM?
nvm. Got it. It'll turn my device back to stock image.
If that works, there is a way I can flash a pure 4.4.2 KitKat on my phone? Or "I337UCUFNB1 100% Stock Rooted ROM" is my best bet?
Thanks!!!
wangweixun said:
nvm. Got it. It'll turn my device back to stock image.
If that works, there is a way I can flash a pure 4.4.2 KitKat on my phone? Or "I337UCUFNB1 100% Stock Rooted ROM" is my best bet?
Thanks!!!
Click to expand...
Click to collapse
There is a guide below with all the answers you seek young Android flashing apprentice. Please slow down & read it thoroughly before flashing anything. Reading saves phones! If the method or rom you want isn't posted in the guide, it can't be done on your MK2 S4. All the roms that will work on MK2 firmware are listed as well as the way to flash the listed Kit Kat roms too. I recommend you try the At&t roms 1st instead of the international versions. Please thank the op in the threads that help you. Good luck. :fingers-crossed:
http://forum.xda-developers.com/showthread.php?t=2616221
wangweixun said:
nvm. Got it. It'll turn my device back to stock image.
If that works, there is a way I can flash a pure 4.4.2 KitKat on my phone? Or "I337UCUFNB1 100% Stock Rooted ROM" is my best bet?
Thanks!!!
Click to expand...
Click to collapse
You can't flash any AOSP roms with safestrap, only Touchwiz based ones. Your bootloader is locked so it's impossible for you to flash any vanilla android or google edition roms.
The "I337UCUFNB1 100% Stock Rooted ROM" is basically stock GS4 Touchwiz firmware that is rooted.

[Q] Rooting S4 (Build No. NC1)

I am new to flashing so sorry if I have asked some stupid questions.
I have SGH-I337 (ATT) and would like to root and then maybe install Cyanogenmod or any other custom ROM.
Device Details:
Baseband - NC1
Build No. - NC1
Android Version - 4.4.2
I tried to root NC1 directly using motochopper. Then I read and I am now trying to downgrade.
I have got ODIN 3.09 but it does not say support to I337. I have gone through Noob Helper
I have downloaded all zips from Downgrade
After reading the article of Modems; I got confused about my bootloader.
I also have gone through the thread but after that confusion, I did not proceed ahead.
Could anyone please help me?
How to identify boot-loader?
Which ODIN to use or do I need to use SAFETRAP (not sure if bootloader is MF3) ?
mayurd said:
I am new to flashing so sorry if I have asked some stupid questions.
I have SGH-I337 (ATT) and would like to root and then maybe install Cyanogenmod or any other custom ROM.
Device Details:
Baseband - NC1
Build No. - NC1
Android Version - 4.4.2
I tried to root NC1 directly using motochopper. Then I read and I am now trying to downgrade.
I have got ODIN 3.09 but it does not say support to I337. I have gone through Noob Helper
I have downloaded all zips from Downgrade
After reading the article of Modems; I got confused about my bootloader.
I also have gone through the thread but after that confusion, I did not proceed ahead.
Could anyone please help me?
How to identify boot-loader?
Which ODIN to use or do I need to use SAFETRAP (not sure if bootloader is MF3) ?
Click to expand...
Click to collapse
Dont worry about Odin saying the device is i9505 or so. The flash will work.
For samsung phones running full stock firmware, all the components have the same version. Since your build is NC1, your bootloader is also NC1.
You are in the right track. Follow the downgrade thread to partial downgrade to MK2. Then use saferoot to root. Then install safestrap v3.72. Then use the deadly venom kitkat magic tool to install any kitkat rom of your choice from this list (post 3).
You cannot install any AOSP based rom. So, no CM. Even google play edition roms dont work.
You can install AOSP themed roms (like BlackBox3.0)
jmjoyas said:
Dont worry about Odin saying the device is i9505 or so. The flash will work.
For samsung phones running full stock firmware, all the components have the same version. Since your build is NC1, your bootloader is also NC1.
You are in the right track. Follow the downgrade thread to partial downgrade to MK2. Then use saferoot to root. Then install safestrap v3.72. Then use the deadly venom kitkat magic tool to install any kitkat rom of your choice from this list (post 3).
You cannot install any AOSP based rom. So, no CM. Even google play edition roms dont work.
You can install AOSP themed roms (like BlackBox3.0)
Click to expand...
Click to collapse
Thank you for the response. I have downgraded to MK2 and have done the root.
I was wondering if you could tell me if it is possible to install Liquid Smooth ROM. I have seen the video and I have downloaded from here which says S4 unified. Also, there are some videos claiming CM on S4.
Could anyone please help on the same?
mayurd said:
Thank you for the response. I have downgraded to MK2 and have done the root.
I was wondering if you could tell me if it is possible to install Liquid Smooth ROM. I have seen the video and I have downloaded from here which says S4 unified. Also, there are some videos claiming CM on S4.
Could anyone please help on the same?
Click to expand...
Click to collapse
As already stated, no AOSP based roms will work (ROMs that are built by compiling AOSP code). Only TouchWiz based roms will work. If you need AOSP look and feel, you can install an AOSP themed rom.
CM/AOSP on ATT S4 is only possible if you have the MDB/MDL bootloader. Anything above that, it wont work.
jmjoyas said:
As already stated, no AOSP based roms will work (ROMs that are built by compiling AOSP code). Only TouchWiz based roms will work. If you need AOSP look and feel, you can install an AOSP themed rom.
CM/AOSP on ATT S4 is only possible if you have the MDB/MDL bootloader. Anything above that, it wont work.
Click to expand...
Click to collapse
Sorry for the repeated questions.
I tried to update through Safestrap with BlackBox. But I got stuck on the boot screen where it shows Samsung Logo. I might have done something wrong. I just clicked next on BlackBox 3.0. Could anyone please help me !
Edit:
When I tried to reboot into recovery mood (Vol Up + Home + Power) it says:
" Secure Fail Kernel
(Warning Sign) System Software not authorised by ATT has been found on your phone"
Don't select the reboot now option in the aroma installer at the end. Then, after the ROM flash is complete and before you reboot the phone, you need to put the phone back in download mode and flash the MLD ap/bl/cp files from the tool
Sent from my GT-I9505 using Tapatalk
jmjoyas said:
Don't select the reboot now option in the aroma installer at the end. Then, after the ROM flash is complete and before you reboot the phone, you need to put the phone back in download mode and flash the MLD ap/bl/cp files from the tool
Sent from my GT-I9505 using Tapatalk
Click to expand...
Click to collapse
I flashed the NB1 using ODIN but it still stays on Samsung Logo with custom logo. I am not able to navigate any where else from that screen.
Edit:
I was able to go into system recovery. Please let me know if I can fix the error somehow.
Thanks a lot !
Get into stock recovery and factory reset. I am not sure why you flashed NB1 though, as there is no direct root method for it yet
Sent from my GT-I9505 using Tapatalk
jmjoyas said:
Get into stock recovery and factory reset. I am not sure why you flashed NB1 though, as there is no direct root method for it yet
Sent from my GT-I9505 using Tapatalk
Click to expand...
Click to collapse
He probably was following the steps that were provided elsewhere here that had you go from nc1 to nb1 then back to the M (I can't remember which M) one.
jmjoyas said:
Get into stock recovery and factory reset. I am not sure why you flashed NB1 though, as there is no direct root method for it yet
Sent from my GT-I9505 using Tapatalk
Click to expand...
Click to collapse
I had rooted MK2 and the installed the custom ROM (Blackbox) and then was suppose to flash NB1.
So, if I just did a factory reset it would solve my error?
Thanks for the help!
Edit:
I tried doing the factory reset. It just wipes all the user data. And I am still stuck on the same screen with Samsung and the custom logo.
mayurd said:
I had rooted MK2 and the installed the custom ROM (Blackbox) and then was suppose to flash NB1.
So, if I just did a factory reset it would solve my error?
Thanks for the help!
Edit:
I tried doing the factory reset. It just wipes all the user data. And I am still stuck on the same screen with Samsung and the custom logo.
Click to expand...
Click to collapse
I have sent you a PM. Probably I can assist better on hangout.

[newbie] galaxy s4 att UCUAMDL

hi all , sorry but my english is so bad
i just bought a galaxy s4 att secondhand , this had bassband UCUAMDL . and i checked the lastest version of it is 4.2.2
can i upgrade my phone up to 4.4 ?
and i dont know terminology about "MF3 - MK2 ............."
could you tell me ?
thanks so much :victory::victory::victory:
Root. Install TWRP recovery. Flash a rom 4.4.4 or try some lollipop love!! You are lucky enough to have an unlocked bootloader..
HORiZUN said:
Root. Install TWRP recovery. Flash a rom 4.4.4 or try some lollipop love!! You are lucky enough to have an unlocked bootloader..
Click to expand...
Click to collapse
thanks so much ,
can you get me links :crying:
but MF3 - MK2 ............. what is it ?
when i flash rom , what i have to notice ?
I hope you don't have MF3. If that's the case, I'm pretty sure that SafeStrap is your only recovery option.
HORiZUN said:
I hope you don't have MF3. If that's the case, I'm pretty sure that SafeStrap is your only recovery option.
Click to expand...
Click to collapse
but i dont know MF3 >"<
what is it ?
how check it on my phone ?
HORiZUN said:
I hope you don't have MF3. If that's the case, I'm pretty sure that SafeStrap is your only recovery option.
Click to expand...
Click to collapse
i am in 4.2.2
sonluyen94 said:
but i dont know MF3 >"<
what is it ?
how check it on my phone ?
Click to expand...
Click to collapse
I have the same question. hopefully someone will be able to explain it to us.
MF3 would be the last three digits of your system software version
HORiZUN said:
MF3 would be the last three digits of your system software version
Click to expand...
Click to collapse
my baseband : I337UCUAMDL
kernel version : 3.4.0-453947 - [email protected] #1
android version : 4.2.2
build number : JDQ39.I337UCUAMDL
it is my phone >"<
You don't have MF3, and that's a good thing. You can install a custom recovery. You need to root, install a custom recovery, and then you can start flashing roms.
sonluyen94 said:
my baseband : I337UCUAMDL
kernel version : 3.4.0-453947 - [email protected] #1
android version : 4.2.2
build number : JDQ39.I337UCUAMDL
it is my phone >"<
Click to expand...
Click to collapse
nogods said:
I have the same question. hopefully someone will be able to explain it to us.
Click to expand...
Click to collapse
Ok, use TowelRoot.com to root the phone, and use TWRP manager to install TWRP on your device. After that check out the development section of this very forum and flash any ROM you wish. 4.2.2 or 4.4.4 or 5.0 or anywhere in between (Just read the thread and instructions first!!!). Whatever you do, never update using the OTA updater on the stock ROM! Also, dotn ever flash an image in Odin that isn't MDL, because if you go higher than MDL, you lose the ability to have a custom recovery. You are one of the lucky ones, cherish the ability, and read through threads before flashing, stuff. Good Luck!
Also, you don't have to worry if the ROM says safestrap compatible, because you don't have to use Safestrap, you can have TWRP instead (which is better), because all Safestrap ROMS are TWRP compatible, but not vice-versa.
npjohnson said:
Ok, use TowelRoot.com to root the phone, and use TWRP manager to install TWRP on your device. After that check out the development section of this very forum and flash any ROM you wish. 4.2.2 or 4.4.4 or 5.0 or anywhere in between (Just read the thread and instructions first!!!). Whatever you do, never update using the OTA updater on the stock ROM! Also, dotn ever flash an image in Odin that isn't MDL, because if you go higher than MDL, you lose the ability to have a custom recovery. You are one of the lucky ones, cherish the ability, and read through threads before flashing, stuff. Good Luck!
Also, you don't have to worry if the ROM says safestrap compatible, because you don't have to use Safestrap, you can have TWRP instead (which is better), because all Safestrap ROMS are TWRP compatible, but not vice-versa.
Click to expand...
Click to collapse
thanks so much :fingers-crossed:
but can you talk to me what rom is good about battery ?
sonluyen94 said:
thanks so much :fingers-crossed:
but can you talk to me what rom is good about battery ?
Click to expand...
Click to collapse
Most if not all. They're all built from either GPE or CM.
All good advice. Plus when you root and get Twrp recovery installed do a backup thru Twrp (Nandroid) and keep on phone and put a copy on pc. That way you have something to restore if you get in trouble. Also, your bootloader is not unlocked. No Att i337s are. Instead devs use an exploit called Loki-Doki to bypass Sammy's security checks to allow custom roms/kernels etc to flash. You can google Loki Doki and read up on it. If the rom or kernel is not loki'd you will have to flash the zip thru recovery to allow the rom or kernel to flash. You will come across this when flashing International roms and kernels. I don't have link any more so maybe someone else can link it. Keep it on SD card. Like noted read OP carefully and last 20 pages of rom thread. Builds newer than MDL are blocked by Att from using Loki and require SafeStrap. Which you don't need to worry about. Although you can read up on it. Good Luck. [emoji1]
Sent from my iPhone 6 Plus using Tapatalk
I hope you won't mind me jumping in your thread.,
I've recently had to odin my mdl phone back to stock. I haven't done that in a long time. I have root, and supersu, and busybox. The TWRP Manager app is malfunctioning and I cannot use it to install recovery. They list the crash I am experiencing in the play store as a known problem, and they say it will take time to fix. I have a good loki'd copy of twrp but the stock recovery doesn't want to install it. I even changed the name to "update.zip" and it fails. So my problem is I need a recovery. I am considering installing Clockworkmod's ROM Manager to install their recovery, and then using their recovery to install the good loki'd twrp that I want. Does this sound like a good plan? I have been away from this hobby for a while.
plasticglock said:
I hope you won't mind me jumping in your thread.,
I've recently had to odin my mdl phone back to stock. I haven't done that in a long time. I have root, and supersu, and busybox. The TWRP Manager app is malfunctioning and I cannot use it to install recovery. They list the crash I am experiencing in the play store as a known problem, and they say it will take time to fix. I have a good loki'd copy of twrp but the stock recovery doesn't want to install it. I even changed the name to "update.zip" and it fails. So my problem is I need a recovery. I am considering installing Clockworkmod's ROM Manager to install their recovery, and then using their recovery to install the good loki'd twrp that I want. Does this sound like a good plan? I have been away from this hobby for a while.
Click to expand...
Click to collapse
You can flash a recovery zip in a custom recovery. So if you have the loki'd twrp in a zip file, flashing cwm first will work
Sent from my Nexus 9 using XDA Free mobile app
jd1639 said:
You can flash a recovery zip in a custom recovery. So if you have the loki'd twrp in a zip file, flashing cwm first will work
Sent from my Nexus 9 using XDA Free mobile app
Click to expand...
Click to collapse
Thanks man, that's exactly what I was planning. I remember avoiding CWM last year due to some issue on this device so I just wanted to make sure it wasn't going to do more harm than good. :good:
plasticglock said:
Thanks man, that's exactly what I was planning. I remember avoiding CWM last year due to some issue on this device so I just wanted to make sure it wasn't going to do more harm than good. :good:
Click to expand...
Click to collapse
ROM manager didn't work. It said it installed cwm recovery but it didn't. I was able to install the latest TWRP with this ROM Installer and it worked like a charm! I then installed my custom TWRP from there, rebooted recovery, and installed Danvh's Google edition. I'm setting it up right now. I'm so happy to get my phone back. I just hope the odin flash fixed my problems.
To the OP try ROM installer to get your custom recovery going. Also if you like simple and fast AOSP check out Danvh's google edition rom, but stick to 4.4.4 for now. 5.0 is out but its buggy. Here's a link to the custom version of twrp that I use. https://www.dropbox.com/l/iDQQqlzNbyiFbQrMF4XcRc It's already loki'd so you can flash it if you have any problems with the latest build.

Categories

Resources