Database Users

[HELP] I think I have bricked it.

Guys, I was about to flash a new rom (Omega v2 for i9500) then I wiped the whole thing in CWM. But in addition to that I have formatted the system (mounts and format > format system), now device won't boot. I can get in Download Mode and Recovery mode but it just won't boot...
Now I am downloading a stock ROM from SamMobile; would it fix it if i flash it via Odin? And any suggestions?
Please tell me something because I am feeling really bad =/.

holygeek said:
Guys, I was about to flash a new rom (Omega v2 for i9500) then I wiped the whole thing in CWM. But in addition to that I have formatted the system (mounts and format > format system), now device won't boot. I can get in Download Mode and Recovery mode but it just won't boot...
Now I am downloading a stock ROM from SamMobile; would it fix it if i flash it via Odin? And any suggestions?
Please tell me something because I am feeling really bad =/.
Click to expand...
Click to collapse
always do a backup via cwm for your rooted stock rom after rooting!
did you flash the rom after formatting system?
any way, Odin should fix it

samersh72 said:
always do a backup via cwm for your rooted stock rom after rooting!
did you flash the rom after formatting system?
any way, Odin should fix it
Click to expand...
Click to collapse
You are right =/ I should have done a backup.. Yea' I did flash the ROM after formatting system but won't boot.

holygeek said:
You are right =/ I should have done a backup.. Yea' I did flash the ROM after formatting system but won't boot.
Click to expand...
Click to collapse
wipe data and cache and dalvik, reflash the rom, rewipe data and cache and dalvik, reboot.
if not, you have odin.

samersh72 said:
wipe data and cache and dalvik, reflash the rom, rewipe data and cache and dalvik, reboot.
if not, you have odin.
Click to expand...
Click to collapse
Yes I have tried it many times. The downlaod is about to end now, I am so freaking nerveous right now, I hope it will fix it!..

CREED V4

Hello everyone. I like CREED V4 and tried installing final build but every time I end up with bootloops. Is this rom fail, or I am doing something wrong?
I followed this tutorial:
1. Flash stock DDLK2 rom as Xicor Yagami said in his thread
2. Boot into CWM recovery
3. Wipe data
4. Wipe cache
5. Wipe dalvik cache (just in case)
6. Wipe battery stats (just in case)
7. Flash CREED V4 rom
8. Reboot
If I am doing something wrong, tell me the right tutorial for installing

After flashing stock DDLK2,follow the steps:
1.Boot into CWM.
2.Under mounts and storage,format system,data and cache.
3.Go back and wipe data and cache.
4.Again go to mounts and storage and mount all the partitions (All should show unmount)
5.Install zip from zip sd card and choose Creed V4 rom file.
6.When the installation is completed,go back and wipe data,cache and dalvik cache.
7.Once done with above steps,reboot the phone!
This tutorial works for every rom.

aniket.lamba said:
After flashing stock DDLK2,follow the steps:
1.Boot into CWM.
2.Under mounts and storage,format system,data and cache.
3.Go back and wipe data and cache.
4.Again go to mounts and storage and mount all the partitions (All should show unmount)
5.Install zip from zip sd card and choose Creed V4 rom file.
6.When the installation is completed,go back and wipe data,cache and dalvik cache.
7.Once done with above steps,reboot the phone!
This tutorial works for every rom.
Click to expand...
Click to collapse
Still no luck. Have you tried this rom by yourself?

creed v4 installation
i am newbie for this just tried installing creed v4 following the complete steps mentioned in the forum
but everytime i try to install, it enters into the bootloop.
using galaxy y gt-s5360
currrent rom 2.3.6 gingerbread DDMD1
even tried with deleting sd-card second partition

anujb said:
i am newbie for this just tried installing creed v4 following the complete steps mentioned in the forum
but everytime i try to install, it enters into the bootloop.
using galaxy y gt-s5360
currrent rom 2.3.6 gingerbread DDMD1
even tried with deleting sd-card second partition
Click to expand...
Click to collapse
Go into cwm
Format system data cache
Mount system data cache
Flash rom zip
Restart
Long as you are using stock or a stock based kernel this rom will boot

marcussmith2626 said:
Go into cwm
Format system data cache
Mount system data cache
Flash rom zip
Restart
Long as you are using stock or a stock based kernel this rom will boot
Click to expand...
Click to collapse
well thanks sir its now booted to the OS but its not showing any network
rest all other things are working fine tried with reinstalling the rom also same issue
what should i do now?
I have taken the backup of bml15

anujb said:
well thanks sir its now booted to the OS but its not showing any network
rest all other things are working fine tried with reinstalling the rom also same issue
what should i do now?
I have taken the backup of bml15
Click to expand...
Click to collapse
See ril thread - Link in signature

marcussmith2626 said:
See ril thread - Link in signature
Click to expand...
Click to collapse
I didn,t get you...

anujb said:
I didn,t get you...
Click to expand...
Click to collapse
Click the link in my signature to open up a list of my threads - find the ril thread & read it

marcussmith2626 said:
Click the link in my signature to open up a list of my threads - find the ril thread & read it[/QUOTE
after flashing the ril file for DDMD1 its working
thanks for support
Click to expand...
Click to collapse

[HYPERION9] stuck at 'Samsung galaxy y gt-s5360' screen

Anyone help me please... i flash the hyperion 9 Gm build... but i stuck at start up screen 'Samsung galaxy y gt s5360' ... i wait for 20minute at that start up screen... nothing happen...my previous rom is hyperion 8 final gm build with hell lock kernel...
#Sorry for bad english

EpullSalvatrucha said:
Anyone help me please... i flash the hyperion 9 Gm build... but i stuck at start up screen 'Samsung galaxy y gt s5360' ... i wait for 20minute at that start up screen... nothing happen...my previous rom is hyperion 8 final gm build with hell lock kernel...
#Sorry for bad english
Click to expand...
Click to collapse
have u wipe data/cache .
Sent from xda-app using smartphone

EpullSalvatrucha said:
Anyone help me please... i flash the hyperion 9 Gm build... but i stuck at start up screen 'Samsung galaxy y gt s5360' ... i wait for 20minute at that start up screen... nothing happen...my previous rom is hyperion 8 final gm build with hell lock kernel...
#Sorry for bad english
Click to expand...
Click to collapse
Make a full wipe :
Go to mounts and storage :
Format system,data,cache
mount them
Flash
Wipe data and cache
Reboot
Sent from my GT-S5360 using Tapatalk 2

mohamedrashad said:
Make a full wipe :
Go to mounts and storage :
Format system,data,cache
mount them
Flash
Wipe data and cache
Reboot
Sent from my GT-S5360 using Tapatalk 2
Click to expand...
Click to collapse
He/She was right
Sent From My Samsung Galaxy Y s5360

Just flash via odin and flash the rom again

make full wipe
I have make full wipe... but the result still same... flash via odin first? better i use other rom... this hyperion9 is so complicated... btw i dont have pc to flash odin...

Lemon_Lime`s said:
have u wipe data/cache .
Sent from xda-app using smartphone
Click to expand...
Click to collapse
alredy done it... not working...

EpullSalvatrucha said:
alredy done it... not working...
Click to expand...
Click to collapse
To flash stock based rom is very easy just:
Go to Cwm
Wipe everything
Mount everything
Flash the rom file
Wipe everything again
Reboot

No no no
Only dont flash the patch u will boot up

myaservip said:
No no no
Only dont flash the patch u will boot up
Click to expand...
Click to collapse
Sorry sir... I dont understand... can you explain more and leave me the download link...

EpullSalvatrucha said:
Sorry sir... I dont understand... can you explain more and leave me the download link...
Click to expand...
Click to collapse
Basically you should always flash a custom ROM on a stock one,
so flash a stock samsung ROM (make sure there is no secured bootloader etc...)
then wipe and install, i always do that :good:

Have you mounted /system?
Sent from my GT-S5360 using Tapatalk 2

shyamSGY said:
Have you mounted /system?
Sent from my GT-S5360 using Tapatalk 2
Click to expand...
Click to collapse
yes... but still not working... stuck at samsung galaxy y gts5360 screen... seem that hyperion9 very complicated than other rom...
ok here how i install hyperion9:-
reboot to recovery(cwm)
mount system/data/cache
wipe dalvik cache
wipe baterystat
wipe data
wipe cache
install zip from sdcard
install HYPERION-09.DXMJ1.GM FINAL.BUILD
reboot
Help please... i want try how hyperion9...

EpullSalvatrucha said:
yes... but still not working... stuck at samsung galaxy y gts5360 screen... seem that hyperion9 very complicated than other rom...
ok here how i install hyperion9:-
reboot to recovery(cwm)
mount system/data/cache
wipe dalvik cache
wipe baterystat
wipe data
wipe cache
install zip from sdcard
install HYPERION-09.DXMJ1.GM FINAL.BUILD
reboot
Help please... i want try how hyperion9...
Click to expand...
Click to collapse
if you followed your instructions the rom wont boot
you need to mount system data cache after you have wiped system data cache so it should be the following
wipe data
wipe system
wipe cache
mount data
mount system
mount cache
install zip from sd
select rom zip
restart

I mean the patch provided by carl dont flash it

Hyperion 9 stuck
myaservip said:
I mean the patch provided by carl dont flash it
Click to expand...
Click to collapse
I had the same issue with the first version, restored previous version,hyperion 7.x, waited installed hyperion 9 dev 3. This one installed ok, boots normally, only imei isnt showing.
Greets Peter

PBakker said:
I had the same issue with the first version, restored previous version,hyperion 7.x, waited installed hyperion 9 dev 3. This one installed ok, boots normally, only imei isnt showing.
Greets Peter
Click to expand...
Click to collapse
Maybe you can use hyperion ril fix...

myaservip said:
I mean the patch provided by carl dont flash it
Click to expand...
Click to collapse
Yes... i not flash the patch... but its still not working...

marcussmith2626 said:
if you followed your instructions the rom wont boot
you need to mount system data cache after you have wiped system data cache so it should be the following
wipe data
wipe system
wipe cache
mount data
mount system
mount cache
install zip from sd
select rom zip
restart
Click to expand...
Click to collapse
Wipe system? where can i find it? if wipe system is format system, i do it... but not working...

EpullSalvatrucha said:
Wipe system? where can i find it? if wipe system is format system, i do it... but not working...
Click to expand...
Click to collapse
you still need to mount system data cache after you have formatted it
you also need to be on a stock based kernel
9 time out of 10 if its not booting its due to user error
The only other thing that would stop it booting is an incompatible baseband but I assume you are on a recent one and therefore should have no problems

Recovery can't read or write to cache

Good morning Folks. Having trouble finding a custom recovery that will read and write to storage. I have a T530 NU. TWRP won't clear the cache and Philz won't write either. Is there a workaround or fix. I did take the lollipop update before rooting. Thanks again.

tt1106 said:
Good morning Folks. Having trouble finding a custom recovery that will read and write to storage. I have a T530 NU. TWRP won't clear the cache and Philz won't write either. Is there a workaround or fix. I did take the lollipop update before rooting. Thanks again.
Click to expand...
Click to collapse
I am pretty sure i'm going to regret asking,
why are you trying to write to cache?
If you are need recovery to execute a script, that script must be run copied to and run from /temp, not cache
i built the philz for sm-t530nu AND have updated to lollipop firmware and as ever , have no issues.
That being said, you are either attempting to perform an action/experiment incorrectly or
you have done some sort of damage somewhere.
philz build clears cache by rm -fr, not by secure wipe, i'm not sure how twrp is set up.
Cache is NOT storage.
m

moonbutt74 said:
I am pretty sure i'm going to regret asking,
why are you trying to write to cache?
If you are need recovery to execute a script, that script must be run copied to and run from /temp, not cache
i built the philz for sm-t530nu AND have updated to lollipop firmware and as ever , have no issues.
That being said, you are either attempting to perform an action/experiment incorrectly or
you have done some sort of damage somewhere.
philz build clears cache by rm -fr, not by secure wipe, i'm not sure how twrp is set up.
Cache is NOT storage.
m
Click to expand...
Click to collapse
Thanks M. Turns out it was a formatting issue. I guess I should have said it won't mount /cache. It's fixed now though. Thanks.

tt1106 said:
Thanks M. Turns out it was a formatting issue. I guess I should have said it won't mount /cache. It's fixed now though. Thanks.
Click to expand...
Click to collapse
okay, thanks, that's still odd though,
does cache mount now ?

Yes. Everything is perfect.

Help needed.. Stuck on boot loop after flashing darklord v3

i need help.. all expert, please... i try to flash darklord v3 for SM-N9005 using CMW 6.0.4.6... it stuck on the aroma installer... then i restore to my backup. now it stuck at boot loop.
1. My phone already rooted.
2. Nandroid backup on SD card.
3. downloaded darklord v3 stable version and MD5 match.
4. wipe / format all, wipe cache, wipe darlvick cache and flash darklord. Stuck at Aroma installer.
5. Reboot, do the same but still stuck at aroma installer.
6. Decided to restore back to stock lollipop. Restore from SD card.
7. Stuck at samsung logo. wipe/ format all, wipe cache, wipe darlvic cache and restart.
8. Still stuck at samsung logo. Restore again. Restore complete.
9. still stuck at samsung logo...
any idea guys????

Are you using twrp 3 ? The last version of twrp has problems with aroma!! Flash the rom again with twrp version 2.8...

Markofree said:
Are you using twrp 3 ? The last version of twrp has problems with aroma!! Flash the rom again with twrp version 2.8...
Click to expand...
Click to collapse
i used clockwork 6.0.4.6... but i already restore to backup from SD card.. the stock rom backuped before flashing darklord. Could it be the aroma installer?? but i think the aroma installer didnt even started when i flashing darklord. It stuck at Aroma Installer V..... then nothing happen.. Bcos of this, i restore back to stock (nandroid backup).

Try to flash the rom again with twrp ( 2.8....) Wipe data, system, cache, dalvik and internal storage If something goes wrong you have the nandroid...https://dl.twrp.me/hlte/twrp-2.8.7.0-hlte-4.4.zip.html

Markofree said:
Try to flash the rom again with twrp ( 2.8....) Wipe data, system, cache, dalvik and internal storage If something goes wrong you have the nandroid...https://dl.twrp.me/hlte/twrp-2.8.7.0-hlte-4.4.zip.html
Click to expand...
Click to collapse
ok will try and get back to you... Thanks!!

So? How did it go?

Cheifwhat said:
So? How did it go?
Click to expand...
Click to collapse
sorry unable to try. Company assign me to outstation. Can't to anything without my pc. Back to my note 2 first. I will get back as soon as possible and post the result. Thanks!

akuma238 said:
sorry unable to try. Company assign me to outstation. Can't to anything without my pc. Back to my note 2 first. I will get back as soon as possible and post the result. Thanks!
Click to expand...
Click to collapse
sorry guys... i am back from work... i manage to download the stock and flash it. Now will stuck with stock first. will try to flash when finish my work. Thanks for all the help.. cheers

Markofree said:
Are you using twrp 3 ? The last version of twrp has problems with aroma!! Flash the rom again with twrp version 2.8...
Click to expand...
Click to collapse
oh..... So that is the reason I was unable to install phonesis rom. Please give me the link of TWRP 2.8 for n9005.
Update: I have downloaded and flashed it from twrp website. Thanks