hi Guys,
i am just trying to find out that if this charger is the original charger that comes with the Grand 2 in India or not . So if u live in India please check if the following picture matches us original charger or not.
And if its not original can you post your model no. & output amps (1 or 2 amp)
Model no. ETA0U80IWE
output 5.0V --- 1.0A
Regards
Shailesh
Closed per op wishes.
Related
Hi everybody
Unfortunately I lost my charger for my XDA neo.
The thing is, that I do have two other USB-chargers for other devices but I am not sure if I can use them with my XDA neo.
Charger 1 (originally for a BenQ MP3 player):
Input: 100-240V ~50/60Hz 0.05A
Output: 4.2V - 110mA
Charger 2 (originally for a GPS device):
Input: 100-240VAC 50/60Hz 0.2A
Output: +5.3V - 0.5A
I think the sticker on my XDA neo says 5VDC - 1A and on the battery it says 3.7VDC - 1200mAh.
Does anybody know if I can use one of the chargers or would I damage my device or battery?
Cheers for your answers!
Well i bought this. 4 dollar and it works....
http://www.dealextreme.com/details.dx/sku.2381
Its a usb charger for european use.
And it works like a charm
details of the adapter are
Model sysb51a
Input: 100-240v
OUTPUT: DC5.0V
1000MA +-5%
i think u have to try but always be carefull with charging equipment.
do it matter?
i never looked @ volts or anything else...my o2, brother moto rokr, sister moto razr & sometime, brother old lg phone...all of us share the same charger....
Hello,
Currently i am lost my T-Mobile MDA Pro original wall charger. But I have one another wall charger, from Motorola. This is the motorola's charger electric parameter:
Input : 100-240V 50/60Hz, 0.15A
Output : 5.0V 550mA
I dont know the parameter of the original T-Mobile MDA Pro wall charger. Because i am worry about the charger compatibility so i am currently using the USB charger plugged into the computer.
Does the motorola charger compatible with my MDA Pro? Is there any issue when using unofficial charger? Thanks.
Sorry for my bad english
OUTPUT: 5V - 1A
This is printed on my MDA Pro charger...
Dear Chosen_One, thanks for your reply.
I will looking for similar charger for my MDA and buy the original if I found it.
Thanks.
Hello
I have managed to charge 3 of 10 HTC Universals with motorola wall charger. Its output was 550mA, 5V... You can try, theres nothing to worry about, if it charges, than you can use it...
THanks Duke,
But, If i am using the different mA, will be there a problem?
What the affect if i am using the charger with different mA?
I am so worry about this, i am not expert in electric.
Hmm .. does anyone have the original MDA Pro Charger? please PM me if someone have.
Thanks,
Thare will not be a problem, only thing is that charging may take up to 2 hours...
You can find shargers on ebay for 10$ and they perform great, they have 1A output that original chargers for this model have...
Thanks Duke,
Oh my God...I found my charger,,,i found them on the inside my CPU..i dont know who insert it but at least the most important is i found my charger...
Hehehe...
Hi folks,
I happened to have lost my original charger for Samsung Galaxy Note 3, and all I have now is the USB cable. For emergency purposes, I need to charge my phone and it doesn't charge fast connecting to a PC. I do have an adapter for Samsung Galaxy S4.
Is it OK to use the USB cable on Samsung Galaxy S4 Adapter and charge my device? Or will there be a problem?
My phone battery is a 3.8 V Li-ion and 12.16 Wh
The Galaxy S4 adapter shows an output value of 5.0 V and 2.0 A
Awaiting replies at earliest ...
Thanks!
-------------------
Edit -
If that's hard ... can anyone holding a Galaxy Note 3 please post your output value mentioned on the original adapter?
Find details in pic
Sent from my SM-N9005 using xda app-developers app
Note 3 charger in picture
Sent from my SM-N9005 using xda app-developers app
It should be fine, most wall charges are fine. If you want faster charging you can make a charge only cable (http://www.youtube.com/watch?v=zwKCXJc1iTc) and it will always charge at max speed. While this isn't good for your PC, it works perfectly for car chargers.
Any 5MV charger will work perfectly.
The official Note 3 charger is 5.3V - 2A, so using a 5V adapter will be fine, just a bit slower.
I use my old HD2 and S3 charger half the time.
using a 2A charger will be fine. 1A charger need double of the time
Sent from my SM-N9005 using Tapatalk
Hi,
I tested various chargers and usb cables, including the normal micro usb from the older devices, most of them works like a charm
Including my old OTG dongle (usb 2.0), I didn't yet compare the speed difference between both...
GreenXSI said:
Hi folks,
I happened to have lost my original charger for Samsung Galaxy Note 3, and all I have now is the USB cable. For emergency purposes, I need to charge my phone and it doesn't charge fast connecting to a PC. I do have an adapter for Samsung Galaxy S4.
Is it OK to use the USB cable on Samsung Galaxy S4 Adapter and charge my device? Or will there be a problem?
My phone battery is a 3.8 V Li-ion and 12.16 Wh
The Galaxy S4 adapter shows an output value of 5.0 V and 2.0 A
Awaiting replies at earliest ...
Thanks!
-------------------
Edit -
If that's hard ... can anyone holding a Galaxy Note 3 please post your output value mentioned on the original adapter?
Click to expand...
Click to collapse
buy any chinese charger man it'll be a gud alternate for d original one
You can use pretty much anything.
I charge my Note 3 with the original one (5.3v/2A), I charge it with a Note 2 charger (5.0v/2A) and I charge it with an old Nokia charger (don't recall voltage but it is 0.8A). It will just charge slower, but otherwise works perfectly.
battery problem
recently I've bought a galaxy tab s 8.4 , but take too mach time (about 6 hours) to charging with it's stock charger (5.3 v , 2.0 A) , when i charged with note 4 charger (5 v , 2.0 A) , it charged normal (about 2.5 hours)
now i have two questions :
1. the note 4 charger is suitable for my device ? isn't bad for battery life ?
2.is it possible that the stock charger was fake !!!???
Hello,
My brother's galaxy s4 i9505 need a new charger because its original charger broke. So i did some searching on the internet, and found out that i9505 support qualcomm quick charge 1.0, and also found a charger which support quick charge ( EP-TA20ewe ), but the problem is that if the EP-TA20ewe charger is a quick charge 1.0 charger or 2.0 charger. Even if the charger supports quick charge 2.0 is it possible for my brother to charge his phone with the charger?, that seems logical for it to support, but i dont know if EP-TA20ewe is for note 3 or note 4 or s3 or s3 , i dont know for which mobile phone model samsung has designed for.
Can you guys please help me find the original samsung charger for samsung galaxy s4 i9505 which supports qualcomm quick charge 1.0 for EUROPE , and i would like it to support 2.0 if it can charge s4 without any heat problem etc.
Thanks
I dont know if i posted this post at a right place, sorry for that
Amazon for your country should have them. I just went to amazon.co.uk and searched for Galaxy S4 charger. The first two hits were for chargers. There may be more in the 144,000+ results.
Failing that, call Samsung. They should be able to sell you a charger.
I use the grand 2 for now 1.5 years and recently i figured out that my phone drained it's battery faster but charging takes almost 4 hours.0_o
What can be the issue?
Btw:the combos used so far
Samsung charger 1A output org. Cable~4 hours
Adaptive fast charger org cable ~4.5hours
Samsung charger 2A sony power bank cable~4.7hours
Ipad air 1 12w charger output 2.4A org cable~5.2hours(0_o)
Generic charger from ebay output 1.5A generic cable~6hours
Rom used:Xosp 6.3
Please help as soon as possible
THANKS!
I am sorry but by mistake i clicked on the q and a thread option for grand 2 can it be changed???