Database Users

[Q] Need Help odin trouble

im sure there are alot of topics like this but last time i tried a move like this i soft bricked my phone so i need help :/
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl1.mbn
<ID:0/003> sbl2.mbn
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> __XmitData_Write
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/003> Added!!
this is the error i dont know whats wrong didnt use a pit file and i kinda dont want to disconnect my phone now last time i did that it got soft bricked i did everything in the unroot guide (noob friendly) btw. using odin 3.10.6,samsung s4 gt-i9505

its all good now used odin 3.9 i think the 3.10 was faulty,the post can be closed or deleted

Can't upgrade SM-N9005 to lollipop

I have an Australian SM-N9005 that I want to upgrade to lollipop. I have done this a few other times without incidence on other Samsung phones but this one won't do it. There isn't any Australian 5.0 firmwares so I have tried the Taiwan and Hong Kong firmwares from SamMobile but I get this message every time
"<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl1.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> sdi.mbn
<ID:0/003> NON-HLOS.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> cache.img.ext4
<ID:0/003> FAIL! (Ext4)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)"
Can someone please help out with this, appreciated

have you the same problem by installing a custom rom?

belveder69 said:
I have an Australian SM-N9005 that I want to upgrade to lollipop. I have done this a few other times without incidence on other Samsung phones but this one won't do it. There isn't any Australian 5.0 firmwares so I have tried the Taiwan and Hong Kong firmwares from SamMobile but I get this message every time
"<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl1.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> sdi.mbn
<ID:0/003> NON-HLOS.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> cache.img.ext4
<ID:0/003> FAIL! (Ext4)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)"
Can someone please help out with this, appreciated
Click to expand...
Click to collapse
DONT TRY other countreys rom special assian...you will lose your imei.lolipop is not that good and everybody runs from it
If you have root acces you can try darklord s6 v3 is the best lolipop for note 3 n9005(you will void your warranty knox 0x1).
The rom is ported from s6 edge and is verry stable
Sent from my SM-A800F using XDA Free mobile app

I worked it out thanks, found the England firmware furthware further down the page.
Yes i could install custom roms but had no sounds and a few other buggy issues.
I disagree about not using foreign firmwares, i use Indian firmware on my Note 4, works just fine

belveder69 said:
I worked it out thanks, found the England firmware furthware further down the page.
Yes i could install custom roms but had no sounds and a few other buggy issues.
I disagree about not using foreign firmwares, i use Indian firmware on my Note 4, works just fine
Click to expand...
Click to collapse
Glade it works ... the ideea was that assian softwares are different for rest..the dark lord rom has no problems with sound ...give it a try.i have it and i dont have any problems
Cheers
Sent from my SM-A800F using XDA Free mobile app

In serious need of some help :(

Hello all,
So ill make this short and sweet, I have an S5 the G900F and it wont boot, it just turns on, shows the Galaxy S5 logo, then appears to start the next Samsung logo but crashes instantly and restarts (does this on a loop)
I have attempted to use odin and flash using the latest firmware I believe to be correct for the phone, to which it fails at the end on "complete write operation failed". I then proceeded to try the recovery.tar file from the same rom and it worked (took about 10 seconds total) but im still getting the same loop.
Tried Kies and all that jazz, literally doesn't even see the phone so cant do jack, recovery mode doesn't boot, all I can get is download mode (home+voldown+power)
I would be ever so grateful if someone knows the answer to this as its driving me insane.
p.s. im by no way good with android so if im missing something blatantly obvious shout it out.
Thanks in Advance

Where am I going wrong?
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> sbl1.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> sdi.mbn
<ID:0/003> NON-HLOS.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> modem.bin
<ID:0/003> cache.img.ext4
<ID:0/003> hidden.img.ext4
<ID:0/003> FAIL! (Ext4)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

itsenigma said:
Where am I going wrong?
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> sbl1.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> sdi.mbn
<ID:0/003> NON-HLOS.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> modem.bin
<ID:0/003> cache.img.ext4
<ID:0/003> hidden.img.ext4
<ID:0/003> FAIL! (Ext4)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Try this guide.
Or this little tutorial:
Open the firmware file in winrar and extract the hidden.img. Rename it as hidden.img.tar.
Load the new file into the PDA tab, and flash.
Click to expand...
Click to collapse

Pls help me. Fail after hidden.img

<ID:0/003> Odin engine v(ID:3.1301)..
<ID:0/003> File analysis..
<ID:0/003> Total Binary size: 3957 M
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> cm.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img
<ID:0/003> cache.img
<ID:0/003> hidden.img
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

I experienced this before. you should use the latest version of your firmware on Sammobile. check if you're using the LATEST.

I interupted my software update and now cannot unbrick my SM-G935A. Im new to this!

Hello. I know, at least, now I know. I should have NEVER interrupted my software update and am now paying dearly. I tried to install the latest version of Odin and used the firmware from a site other than the official download site as the specific firmware I needed wasn't there. The firmware name matched my phone's model and I selected the four types of files in the Odin menu and hit start. I got this command sequence
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1401)..
<ID:0/003> File analysis..
<ID:0/003> Total Binary size: 4721 M
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> apdp.mbn
<ID:0/003> cmnlib.mbn
<ID:0/003> cmnlib64.mbn
<ID:0/003> devcfg.mbn
<ID:0/003> emmc_appsboot.mbn
<ID:0/003> hyp.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Any help y'all can give will be greatly appreciated. Thanks