Database Users

[Q] Recovery flashing error

<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
What can i do?

change to philz or twrp or chenglu...

rayman95 said:
change to philz or twrp or chenglu...
Click to expand...
Click to collapse
What is "chenglu"???

xSplashx said:
What is "chenglu"???
Click to expand...
Click to collapse
CWM....

From the beginning it was not installed any recovery, but I found the solution:
You need to be switched on and must be turned off the "reactivation lock".

[Q] Need Help odin trouble

im sure there are alot of topics like this but last time i tried a move like this i soft bricked my phone so i need help :/
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl1.mbn
<ID:0/003> sbl2.mbn
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> __XmitData_Write
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/003> Added!!
this is the error i dont know whats wrong didnt use a pit file and i kinda dont want to disconnect my phone now last time i did that it got soft bricked i did everything in the unroot guide (noob friendly) btw. using odin 3.10.6,samsung s4 gt-i9505

its all good now used odin 3.9 i think the 3.10 was faulty,the post can be closed or deleted

In serious need of some help :(

Hello all,
So ill make this short and sweet, I have an S5 the G900F and it wont boot, it just turns on, shows the Galaxy S5 logo, then appears to start the next Samsung logo but crashes instantly and restarts (does this on a loop)
I have attempted to use odin and flash using the latest firmware I believe to be correct for the phone, to which it fails at the end on "complete write operation failed". I then proceeded to try the recovery.tar file from the same rom and it worked (took about 10 seconds total) but im still getting the same loop.
Tried Kies and all that jazz, literally doesn't even see the phone so cant do jack, recovery mode doesn't boot, all I can get is download mode (home+voldown+power)
I would be ever so grateful if someone knows the answer to this as its driving me insane.
p.s. im by no way good with android so if im missing something blatantly obvious shout it out.
Thanks in Advance

Where am I going wrong?
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> sbl1.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> sdi.mbn
<ID:0/003> NON-HLOS.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> modem.bin
<ID:0/003> cache.img.ext4
<ID:0/003> hidden.img.ext4
<ID:0/003> FAIL! (Ext4)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

itsenigma said:
Where am I going wrong?
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> sbl1.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> sdi.mbn
<ID:0/003> NON-HLOS.bin
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> modem.bin
<ID:0/003> cache.img.ext4
<ID:0/003> hidden.img.ext4
<ID:0/003> FAIL! (Ext4)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Try this guide.
Or this little tutorial:
Open the firmware file in winrar and extract the hidden.img. Rename it as hidden.img.tar.
Load the new file into the PDA tab, and flash.
Click to expand...
Click to collapse

Failing to flash stock on ODIN

Hey there,
my galaxy s8 went into a bootloop after rooting with TWRP.
Currently on Android 8.0 and the cpu is Exynos.
After using Odin to reflash to stock android it failed numerous times.
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1301)..
<ID:0/003> File analysis..
<ID:0/003> Total Binary size: 5869 M
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> cm.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Using Odin v3.13.1

marky2458 said:
Hey there,
my galaxy s8 went into a bootloop after rooting with TWRP.
Currently on Android 8.0 and the cpu is Exynos.
After using Odin to reflash to stock android it failed numerous times.
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1301)..
<ID:0/003> File analysis..
<ID:0/003> Total Binary size: 5869 M
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> cm.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Using Odin v3.13.1
Click to expand...
Click to collapse
Are you using correct firmware for your phone and region or maybe trying to use older version of firmware than what's on your phone.

I interupted my software update and now cannot unbrick my SM-G935A. Im new to this!

Hello. I know, at least, now I know. I should have NEVER interrupted my software update and am now paying dearly. I tried to install the latest version of Odin and used the firmware from a site other than the official download site as the specific firmware I needed wasn't there. The firmware name matched my phone's model and I selected the four types of files in the Odin menu and hit start. I got this command sequence
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1401)..
<ID:0/003> File analysis..
<ID:0/003> Total Binary size: 4721 M
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> apdp.mbn
<ID:0/003> cmnlib.mbn
<ID:0/003> cmnlib64.mbn
<ID:0/003> devcfg.mbn
<ID:0/003> emmc_appsboot.mbn
<ID:0/003> hyp.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Any help y'all can give will be greatly appreciated. Thanks