[Q] Recovery flashing error - Galaxy Note 3 Q&A, Help & Troubleshooting

<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> recovery.img
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
What can i do?

change to philz or twrp or chenglu...

rayman95 said:
change to philz or twrp or chenglu...
Click to expand...
Click to collapse
What is "chenglu"???

xSplashx said:
What is "chenglu"???
Click to expand...
Click to collapse
CWM....

From the beginning it was not installed any recovery, but I found the solution:
You need to be switched on and must be turned off the "reactivation lock".

Related

Flashing fail in odin v1.85

This is the log of my odin flashing stock rom for galaxy y
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Use another odin file and next time please create these threads in Q/A section
gaurav9822 said:
This is the log of my odin flashing stock rom for galaxy y
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> boot.img
<ID:0/003> NAND Write Start!!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Disable antivirus before open odin .
If don't work . Disable antivirus then reboot pc then open odin.
If still don't unistall antivirus.
Sent from my GT-S5360 using Tapatalk 2

[Q] Need Help odin trouble

im sure there are alot of topics like this but last time i tried a move like this i soft bricked my phone so i need help :/
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl1.mbn
<ID:0/003> sbl2.mbn
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> tz.mbn
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> __XmitData_Write
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/003> Added!!
this is the error i dont know whats wrong didnt use a pit file and i kinda dont want to disconnect my phone now last time i did that it got soft bricked i did everything in the unroot guide (noob friendly) btw. using odin 3.10.6,samsung s4 gt-i9505
its all good now used odin 3.9 i think the 3.10 was faulty,the post can be closed or deleted

marshmallow to stock (5.0), odin errors

Hi,
I have a n900w8 with some marshmallow rom (and some kernel I don't remember since I've already wiped all). I've downloaded a original stock rom from sammobile. Unfortunately, the latest version is a lollipop one, not a marshmallow one.
I've read that the bootloader cannot be downgraded after the 5.x. I think I have 5.x or higher bootloader. Are there any chance to install the custom rom? like this one(http://www.sammobile.com/firmwares/download/67302/N900UBUEBOK1_N900UUBEBOK1_UPO)
Kies3 says mi phone is not compatible with it, and kies "standard" doesn't recognise any device.
Odin gives me this error:
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin engine v(ID:3.1101)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> sboot.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
I've read that editing the TAR file and remove some files (like the boot.img, cache.img, hidden.img. etc). I've tried removing several of them with same (or similar) results.
If I remove the boot.bin, I get this:
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1101)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> cache.img
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
If I remove cache.img, I get:
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1101)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> hidden.img
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
If I remove hidden.bin:
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1101)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> modem.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
If I remove modem.bin:
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1101)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> param.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> recovery.img
<ID:0/003> system.img
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
I've restored a 4.4.4 backup with twrp before doing all that
I'm running out of ideas.
Thank you very much!
leitor79 said:
Hi,
I have a n900w8 with some marshmallow rom (and some kernel I don't remember since I've already wiped all). I've downloaded a original stock rom from sammobile. Unfortunately, the latest version is a lollipop one, not a marshmallow one.
I've read that the bootloader cannot be downgraded after the 5.x. I think I have 5.x or higher bootloader. Are there any chance to install the custom rom? like this one(http://www.sammobile.com/firmwares/download/67302/N900UBUEBOK1_N900UUBEBOK1_UPO)
Kies3 says mi phone is not compatible with it, and kies "standard" doesn't recognise any device.
Odin gives me this error:
I've read that editing the TAR file and remove some files (like the boot.img, cache.img, hidden.img. etc). I've tried removing several of them with same (or similar) results.
If I remove the boot.bin, I get this:
If I remove cache.img, I get:
If I remove hidden.bin:
If I remove modem.bin:
I've restored a 4.4.4 backup with twrp before doing all that
I'm running out of ideas.
Thank you very much!
Click to expand...
Click to collapse
frist of all do a full wipe (cache,dalvik,system,data)
secend flash last modem and bootloader 5.0 i think its PB1
third flash a stock rom
its must working
because i did it
Download the stock ROM for the sm-n900w8 from sammobile.com and flash it in Odin: http://www.sammobile.com/firmwares/database/SM-N900W8/
Flashing in Odin will wipe everything and you should do a factory wipe using stock recovery before booting the newly-flashed stock ROM for the first time.
Odin failed the first time because the ROM you tried to flash has a bootloader that is either not meant for your phone or the bootloader in the ROM is older than the bootloader in the phone. Look like you are flashing the n900 stock ROM, not the n900w8 ROM. You have a Canadian note 3? You can confirm the model # by booting into download mode.
Do nothing it's gonna flash it because I have incurred same problems while flashing from lollipop to kitkat but then I just slept at night and the next morning tried with another USB cable and it worked fine .
It's nothing to do with bootloader because every stock Rom contains bootloader and it will flash it anyhow.
Sent from my SM-N900 using Tapatalk

Failing to flash stock on ODIN

Hey there,
my galaxy s8 went into a bootloop after rooting with TWRP.
Currently on Android 8.0 and the cpu is Exynos.
After using Odin to reflash to stock android it failed numerous times.
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1301)..
<ID:0/003> File analysis..
<ID:0/003> Total Binary size: 5869 M
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> cm.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Using Odin v3.13.1
marky2458 said:
Hey there,
my galaxy s8 went into a bootloop after rooting with TWRP.
Currently on Android 8.0 and the cpu is Exynos.
After using Odin to reflash to stock android it failed numerous times.
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1301)..
<ID:0/003> File analysis..
<ID:0/003> Total Binary size: 5869 M
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> cm.bin
<ID:0/003> FAIL!
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Using Odin v3.13.1
Click to expand...
Click to collapse
Are you using correct firmware for your phone and region or maybe trying to use older version of firmware than what's on your phone.

I interupted my software update and now cannot unbrick my SM-G935A. Im new to this!

Hello. I know, at least, now I know. I should have NEVER interrupted my software update and am now paying dearly. I tried to install the latest version of Odin and used the firmware from a site other than the official download site as the specific firmware I needed wasn't there. The firmware name matched my phone's model and I selected the four types of files in the Odin menu and hit start. I got this command sequence
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1401)..
<ID:0/003> File analysis..
<ID:0/003> Total Binary size: 4721 M
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NAND Write Start!!
<ID:0/003> SingleDownload.
<ID:0/003> apdp.mbn
<ID:0/003> cmnlib.mbn
<ID:0/003> cmnlib64.mbn
<ID:0/003> devcfg.mbn
<ID:0/003> emmc_appsboot.mbn
<ID:0/003> hyp.mbn
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Any help y'all can give will be greatly appreciated. Thanks

Categories

Resources