I was just wondering if people could comment on how they are getting the best sound quality on their s5.
I generally find it sounds a bit lifeless on bluetooth in my car compared to my iPhone the same bluetooth with the same songs so i've been looking to tweak it.
From what I can tell there two popular ways to improve it.
Viper4Android ( requires SElinux mode to be set to Permissive)
Extremebeats, also needs V4A to work properly? not entirely sure it does anything different to V4A on its own?
http://forum.xda-developers.com/showthread.php?t=2634729
What I don't get is Extremebeats claims to support clear audio, SRS wow etc, but they are all different technologies, how can it use them all at once?
The V4A profiles don't seem to mention SRS wow etc at all?
What do you guys use?
Related
Hi gang,
I have been a long time Atom user. One thing that has constantly bugged me is the audio level - both in the earpiece and on Bluetooth connection to my car. Recently the IT manager at my work threw me a HTC Touch Dual (Nike) to evaluate for him. The audio (sound) level on both the earpiece and the same Bluetooth connection for the Nike is 100% better. Is there a ROM available that addresses the poor sound on the Atom or is it a restriction based on the hardware ?
I have tried a stack of searches however can't find anything that addresses this specifically ???
Phil...
OK.
Does anyone know of any registry hacks that help with $hitty audio levels for the Atom ???
After may searches there are heaps of people complaining about audio levels - not may solutions though.
Pleaseeeeee help the IT manager will be asking for the Nike back soon....
have you try SRS WOW HD plugin? it will amplify the audio
plus if u still think its soft, use the equalizer to amplify further.
Tabbe said:
have you try SRS WOW HD plugin? it will amplify the audio
plus if u still think its soft, use the equalizer to amplify further.
Click to expand...
Click to collapse
Thanks Tabbe,
Two things looks like I need to upgrade the ROM to WM6.x to use SRS is that right ???
I may not have been clear enough - mainly concerned with audio levels for the phone - first in the earpiece and second for the built in speakers. Will SRS assist for these ???
Phil...
I think it is the biggest concern regarding Dolby setting wont remain as it should be after adjust set to full performance especially on the treble point. Something that we pay for nothing over stupid Dolby company. Unless someone can help with that and would be much appreciate. Thanks.
Well, depends on headphones (bad idea to hear kind recordings via phone-speakers, though it sounds better than usual). I had better sound quality on my prev phone with root and Viper4Android (and i'm w8ing it for my axon 7 mini), but anyway as for me - dolby atmos works good. Ofc it is more powerful for 6ch ac3 audio, but even with stereo it works good.
I pref jazz, orchestral and piano music. My Dolby settings: Auto Volume, Voice correcting (idk how it named in english version), equalizer +1(2) -1 0 +1 +2(3). Headphones Marshall Monitor.
Gl.
Non-stock ROM Audio Performance with Dolby Atmos
1) What ROMS have equivalent performance?
2) Does they audio enhancement still work with different apps within the other Roms or is it somehow limited?
3) Any thing else to know about audio quality prior to switching ROMs?
cyrusharding said:
Non-stock ROM Audio Performance with Dolby Atmos
1) What ROMS have equivalent performance?
2) Does they audio enhancement still work with different apps within the other Roms or is it somehow limited?
3) Any thing else to know about audio quality prior to switching ROMs?
Click to expand...
Click to collapse
Look, audio performance and dolby atmos are two different things. Atmos adds a lot of noise.
If you want good audio, use Viper4Android, the Magisk module by shadysquirrel works without tampering with SELinux.
Flash the AK4490 patch from the Guides section, it may be integrated in the ROMs but it doesn't hurt asking
Hello,
So based on my request for help in the following thread, I was initially trying to setup ultimate audio experience with ARISE (not only V4A) to run on stock 8.1 (Mar 18 updates). However after numerous tricks and ways to make it work , i reliazed its not possible for now. I also came to know that V4A and Atmos dont live together well and Atmos overrides the sound processing by V4A, which has to be manually reactivated time and again.
https://forum.xda-developers.com/pixel-xl/how-to/guide-ultimate-audio-battery-guide-t3727124
I reverted to Android 8..0.0 (Oct 17) and then following the guide in this thread
https://forum.xda-developers.com/pixel-xl/how-to/guide-how-to-install-arise-sound-8-0-t3692415
I was able to install V4A , Dolby Surround to work together (Arkamys , A3MD crash repeatedly and ICESound breaks the sound at all from speaker or headsets, didnt find a solution for it so far).
One of reasons for me to try Google Pixel with 8.+.+ was to try the new (supposedly) hi resolution bluetooth codecs namely AptxHD and LDAC (a Sony version of Hi-res audio protocol).
Being an amateur audiophile, I bought Sony Wh1000MX2 which supports both LDAC and AptXHD.
A finding which I made was when I paired the XL with Sony Headphones using LDAC, the audio quality was good, however I wanted to make it better by activating V4A and Dolby Surround audio mods. After fiddiling for a couple of hours, I realize V4A and Dolby does not work or recognized the sound output when the headphones were connected using LDAC. It was seen as the V4A driver status showed "Abnormal" and no "Processing" was done. However with the same setup as soon as I changed my bluetooth audio connection to use AptxHD , the V4A and Dolby started working and sound was equally superb with the added value of tuning it more to my taste using the audio mod.
I am not sure why the audio mods are not bluetooth connection protocol agnostic, or why not working with LDAC.
Shared it for information, maybe the gurus would be able to reproduce the setup and post a working solution.
Thanks.
Hi, same problem here. I have a pair of Sony MDR 1000x Bluetooth cans with ldac support. Flashed my Xiaomi Redmi Note 4x to LOS unofficial Oreo to get the ldac codec going (it works indeed), but v4a does not work with this codec. If I choose the SBC codec, it apears to at least realize that it can do something (although changeing effects dosent work). With ldac enabled v4a driver status says abnormal and obviously nothing works. All in all I guess that we cant do anything other than wait, so that some devs will adopt to the new features of Android Oreo.
Hope for the best
PS: sorry for possible spelling mistakes
edit: if someone needs logs, im happy to provide them.
HyperEscape said:
Hello,
So based on my request for help in the following thread, I was initially trying to setup ultimate audio experience with ARISE (not only V4A) to run on stock 8.1 (Mar 18 updates). However after numerous tricks and ways to make it work , i reliazed its not possible for now. I also came to know that V4A and Atmos dont live together well and Atmos overrides the sound processing by V4A, which has to be manually reactivated time and again.
https://forum.xda-developers.com/pixel-xl/how-to/guide-ultimate-audio-battery-guide-t3727124
I reverted to Android 8..0.0 (Oct 17) and then following the guide in this thread
https://forum.xda-developers.com/pixel-xl/how-to/guide-how-to-install-arise-sound-8-0-t3692415
I was able to install V4A , Dolby Surround to work together (Arkamys , A3MD crash repeatedly and ICESound breaks the sound at all from speaker or headsets, didnt find a solution for it so far).
One of reasons for me to try Google Pixel with 8.+.+ was to try the new (supposedly) hi resolution bluetooth codecs namely AptxHD and LDAC (a Sony version of Hi-res audio protocol).
Being an amateur audiophile, I bought Sony Wh1000MX2 which supports both LDAC and AptXHD.
A finding which I made was when I paired the XL with Sony Headphones using LDAC, the audio quality was good, however I wanted to make it better by activating V4A and Dolby Surround audio mods. After fiddiling for a couple of hours, I realize V4A and Dolby does not work or recognized the sound output when the headphones were connected using LDAC. It was seen as the V4A driver status showed "Abnormal" and no "Processing" was done. However with the same setup as soon as I changed my bluetooth audio connection to use AptxHD , the V4A and Dolby started working and sound was equally superb with the added value of tuning it more to my taste using the audio mod.
I am not sure why the audio mods are not bluetooth connection protocol agnostic, or why not working with LDAC.
Shared it for information, maybe the gurus would be able to reproduce the setup and post a working solution.
Thanks.
Click to expand...
Click to collapse
Rakkke said:
Hi, same problem here. I have a pair of Sony MDR 1000x Bluetooth cans with ldac support. Flashed my Xiaomi Redmi Note 4x to LOS unofficial Oreo to get the ldac codec going (it works indeed), but v4a does not work with this codec. If I choose the SBC codec, it apears to at least realize that it can do something (although changeing effects dosent work). With ldac enabled v4a driver status says abnormal and obviously nothing works. All in all I guess that we cant do anything other than wait, so that some devs will adopt to the new features of Android Oreo.
edit: if someone needs logs, im happy to provide them.
Click to expand...
Click to collapse
Not the type to necro old threads, but I believe I've found the solution to your problem. I had this problem myself on my V30 and realized what was making Viper effects not processing. LDAC by default starts off with an audio sample quality of 96 kHz and 32 audio bits per sample. If you can change these settings in developer options, lower the sample rate(sample quality) to 44.1 kHz - the rate used for 90% of all music & audio and the bits per sample to 24. Viper audio effects should work now with LDAC. You will have to do this every time you turn on/pair your headphones to your phone.
Ypu can use James DSP for ldac codec with any sample rate and bits per sample. James DSP has a magisk module and can be installed from magisk.
Hi guys.
A friend of mine who is good into sound stuff, headphones ,dacs etc recommended me this phone just so I can get better sound over bluetooth and other wired headphones.
I used S7 edge with some average bluetooth buds and got average sound.
Now I got this device,in used condition and I think I have even worse sound then with my S7 edge.
Dolby Atmos is enabled and I'm on Android 7.1.
I expected even better sound over speakers,which is nice but kinda lacks a lot of bass,and sound stages.
Even speakers on my tablet Samsung S5e are way much better in sound.
Yeah sound is nice with my Beyerdynamics MMX300 Gen 2 but so is the sound with them on my S7 edge.
I mean I am not impressed at all with this phone so I thought to ask, maybe I need some other ROM,software etc,huh?
Help is appreciated.
I use mostly average quality bluetooth earbuds,and listen to trance music.
I can name the devices if it's important.
paparazzo79 said:
Hi guys.
A friend of mine who is good into sound stuff, headphones ,dacs etc recommended me this phone just so I can get better sound over bluetooth and other wired headphones.
I used S7 edge with some average bluetooth buds and got average sound.
Now I got this device,in used condition and I think I have even worse sound then with my S7 edge.
Dolby Atmos is enabled and I'm on Android 7.1.
I expected even better sound over speakers,which is nice but kinda lacks a lot of bass,and sound stages.
Even speakers on my tablet Samsung S5e are way much better in sound.
Yeah sound is nice with my Beyerdynamics MMX300 Gen 2 but so is the sound with them on my S7 edge.
I mean I am not impressed at all with this phone so I thought to ask, maybe I need some other ROM,software etc,huh?
Help is appreciated.
I use mostly average quality bluetooth earbuds,and listen to trance music.
I can name the devices if it's important.
Click to expand...
Click to collapse
Honestly audio quality over 3.5mm jack is so good on this phone that I still havent found a successor to it. Using it as my daily. In order to get best audio follow this:
First disable Dolby Atmos. It really does not improve the sound, more the opposite. Then check in Audio / HiFi settings that "Super" mode is activated. This will enable AKM4490 chip.
Bluetooth Audio depends on your buds and not your phone. Just make sure in developer options that best available codec is activates. On Sony buds you can enable LDAC (needs Andrioid 8.0 or newer) to get best quality. But no bluetooth buds can match the quality of 3.5mm jack on this phone.
TruePlaya1977 said:
Honestly audio quality over 3.5mm jack is so good on this phone that I still havent found a successor to it. Using it as my daily. In order to get best audio follow this:
First disable Dolby Atmos. It really does not improve the sound, more the opposite. Then check in Audio / HiFi settings that "Super" mode is activated. This will enable AKM4490 chip.
Bluetooth Audio depends on your buds and not your phone. Just make sure in developer options that best available codec is activates. On Sony buds you can enable LDAC (needs Andrioid 8.0 or newer) to get best quality. But no bluetooth buds can match the quality of 3.5mm jack on this phone.
Click to expand...
Click to collapse
I mean I do get good sound over 3.5mm...I thought I will get great sound as well over BT.
All this above is already preconfigured.
Since I purchased used phone,when I plug in headphones into 3.5mm jack,thouse don't go all the way in like on other phones where I can simply feel when the 3.5mm connector goes all the way in.
I suppose I were wrong reagarding bluetooth sound since I mostly use bluetooth headphones.
But thx for help.