Database Users

[HELP] Got AT&T sim into International S3, calling works but data doesn't work

I got an international S3 from India and went to AT&T store to get a micro sim.
Got that installed and then the phone calling works fine but data (internet) doesn't work.
They said they would have to register my phone's IMEI but it still doesn't work. They put in a new APN, and still same. They called their tech and they couldn't help. Their last suggestion was to try calling Samsung, but I had to leave to get to work.
I believe there are already people using International version with AT&T for the S3. So any ideas what could be wrong?
Thanks!

Try factory resetting your phone. Other than that, make sure you have the $10/month data plan (unlimited messaging required) or the $15/month data (no messaging required). To do that you'll have to call into customer care and say you have an unlocked non-smartphone. If you go into the store to do this they'll give you the more expensive internet because they'll see you have a smartphone. If you're changing data plans it CAN take 24-48 hours for it to be effective, although it usually doesn't take that long. After that's done go into Settings, More Settings (under Wireless and Network settings), Mobile Networks, and then Access Point Names. Make sure there is an Access Point Name titled "Cingular 410". If there isn't then press Menu, and then "+ New APN". The settings should look like this:
Name: Cingular 410
APN: wap.cingular
Proxy: Not set
Port: Not set
User name: [email protected]
My Password field is auto-filled, so I don't have that. Try leaving it blank, but if that doesn't work call customer care and get that information.
Server: cingulargprs.com
MMSC: http://mmsc.cingular.com
MMS proxy: wireless.cingular.com
MMS port: Not set
MCC: 310
MNC: 410
Authentication type: Not set
APN type: default,supl,mms
APN protocol: IPv4
Enable/disable APN: Checked (this field is grayed out for me, but it is checked)
Bearer: Unspecified
This should fix it. The only thing I'm unclear on is the Password part.

Password is (all caps): CINGULAR1

Look at the thread in my signature.
Sent from my GT-I9300 using Tapatalk 2

Well now my SIM is completely unregistered, can't even make calls. Operator asked me to go to the store and get a new SIM Card.
So, this won't work without the switch to the non-smartphone data plan? It is going to be hard to pull off when I am in the store.

kumarshah said:
Well now my SIM is completely unregistered, can't even make calls. Operator asked me to go to the store and get a new SIM Card.
So, this won't work without the switch to the non-smartphone data plan? It is going to be hard to pull off when I am in the store.
Click to expand...
Click to collapse
It should work just fine on the smartphone data plan, and you should be able to switch to the non smartphone data plan afterwards.
Sent from my GT-I9300 using Tapatalk 2

joshnichols189 said:
It should work just fine on the smartphone data plan, and you should be able to switch to the non smartphone data plan afterwards.
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
Ok, thanks. What should I tell the AT&T store people today when I go in the evening?
It feels like they did something on the account to screw it up. Would it help to suggest that they get this working on an AT&T HTC OneX and then transfer the SIM to my phone?

It could be that you have a defective SIM card. Take it one step at a time. Replace the SIM card. Make sure you have functionality with other services (such as voice and messaging). Check all the APN settings to make sure those are correct. Make sure you have a data plan for AT&T.

I'm on another carrier but I had the same problem at first, only phone call and sms working. I had to change my APN for the Data to work.

maxcc said:
I'm on another carrier but I had the same problem at first, only phone call and sms working. I had to change my APN for the Data to work.
Click to expand...
Click to collapse
What did you change your APN too?
Edit: nvm, you said another carrier

kumarshah said:
What did you change your APN too?
Edit: nvm, you said another carrier
Click to expand...
Click to collapse
All of the APN settings for AT&T are in my first response. Double check that yours look the same.

kumarshah said:
I got an international S3 from India and went to AT&T store to get a micro sim.
Got that installed and then the phone calling works fine but data (internet) doesn't work.
They said they would have to register my phone's IMEI but it still doesn't work. They put in a new APN, and still same. They called their tech and they couldn't help. Their last suggestion was to try calling Samsung, but I had to leave to get to work.
I believe there are already people using International version with AT&T for the S3. So any ideas what could be wrong?
Thanks!
Click to expand...
Click to collapse
What are the APN settings you input, did you save and select it afterwards?
EDIT: Check the settings in the screenshots on the first posts of this thread, yours should match.

Thanks, I went back to the store. We got my original S2 working and this time switched to micro sim without making any IMEI/etc changes and it worked.
Anyone know what extra steps need to be taken to get the voicemail working?

[Q] Slow data speeds on AT&T?

Ok, so I just got my N4 last night and so far I am very impressed with it, especially being my first android phone. However, the data speeds seem quite slow, can someone please help me out?
Using this APN I am connected to HSPA + on AT&T but am only getting around 1 Mbps both up and down. Does anyone know what could be causing me to have such slow speeds?

NoL1m1tZ said:
Ok, so I just got my N4 last night and so far I am very impressed with it, especially being my first android phone. However, the data speeds seem quite slow, can someone please help me out?
Using this APN I am connected to HSPA + on AT&T but am only getting around 1 Mbps both up and down. Does anyone know what could be causing me to have such slow speeds?
Click to expand...
Click to collapse
Are you using a Direct Connection with AT&T?
Or do you have a MVNO SIM or AT&T Prepaid SIM?

UberSlackr said:
Are you using a Direct Connection with AT&T?
Or do you have a MVNO SIM or AT&T Prepaid SIM?
Click to expand...
Click to collapse
I'm on an AT&T family plan with a sim card pulled from an iphone 5. (Not sure if I answered your question, im not on prepaid though)

I have the same issues. I signed up for at&t family shared 10gb for 3 lines a month ago. I have the GS3 and 2 iphone 5's. 2 weeks ago i bought the nexus 4 and the speeds are bad compared to LTE. I get 3-4 down and 1 up. I used the following APN settings. So far its the best one's that work.
http://forums.androiddoes.net/showt...to-get-good-AT-amp-T-HSPA-speeds-with-Nexus-4
the Nexus 4 works best on t-mobile in the US only because they support HSPA+ while at&t is HSPA and LTE.
AT&T is building up their LTE markets and not upgrading their current HSPA.

Are you referring to the pta one or the phone one? On the pta one I don't get a data connection.

-Bump

Ok you do not get any data with pta apn because your sim is not provisioned for LTE(even if LTE is on your plan). My daughter had an iphone 4s(we have a data share plan which includes LTE) and I switched her to my GS3. She also didn't get any data using the pta APN. I just called at&t and told them they needed to provision it for LTE because the LTE apn wasn't working. They put me on hold, provisioned the sim for LTE and had me reboot and then the PTA apn worked. It was the same deal for my mom when she went from a HSPA+ phone to a LTE phone. She got no data at first until I called and told them her old phone was HSPA+ and her new one was LTE. That's when I learned they have to reprovision it. Of course they wouldn't need to do this if you had originally had an LTE phone

graffixnyc said:
Ok you do not get any data with pta apn because your sim is not provisioned for LTE(even if LTE is on your plan). My daughter had an iphone 4s(we have a data share plan which includes LTE) and I switched her to my GS3. She also didn't get any data using the pta APN. I just called at&t and told them they needed to provision it for LTE because the LTE apn wasn't working. They put me on hold, provisioned the sim for LTE and had me reboot and then the PTA apn worked. It was the same deal for my mom when she went from a HSPA+ phone to a LTE phone. She got no data at first until I called and told them her old phone was HSPA+ and her new one was LTE. That's when I learned they have to reprovision it. Of course they wouldn't need to do this if you had originally had an LTE phone
Click to expand...
Click to collapse
That's the thing, my iphone 5 was lte.

Just an update, checked on the AT&T site and it says my account is provisioned for LTE yet the PTA apn does not work? Any help?

NoL1m1tZ said:
Just an update, checked on the AT&T site and it says my account is provisioned for LTE yet the PTA apn does not work? Any help?
Click to expand...
Click to collapse
Could it have to do with the Nexus 4 not supporting LTE, only HSPA+?
Could you post the APN settings you are currently using? (Make sure its the one with the blue dot across from it)

using this one
http://goo.gl/4Dbgj

NoL1m1tZ said:
using this one
http://goo.gl/4Dbgj
Click to expand...
Click to collapse
Do you mind testing a few things?
If so, Could you press the menu icon (bottom right corner) in the APNs settings, then select restore to default.
Then power off the device, Open APNs Settings again, and check to be sure the default APN (Should be the only one listed) is selected (Has the blue dot to the far right) then wait a few second, and power the device off and on again..
After devices is back on, check your internet, go to any webpage (other than a google one)
If still not working fast enough, go Back to APNs settings..
Add New, and try these settings...
APN: wap.cingular
User Name: [email protected] (Case Sensitive)
Password: CINGULAR1 (Case Sensitive)
MMSC: http://mmsc.cingular.com
MMS Proxy: wireless.cingular.com
MMS Port: 80
MCC: 310
MNC: 410
Auth Type: n/a
APN Type: internet + mms
Bearer: unspecified
Delete the First APN... enable the one you just created (press the radio button so that it turns blue)
then restart the phone.
Remember this phone does not support LTE service, so you may need to have your account provisioned to HSPA+ and not LTE.
Note: The can provision each line of service individually, just not sure if it can be done that way with the Data Share Plans (they did not have those when I worked there.)

Google Nexus 4 net10 APN Settings for AT&T

I've finally got data and MMS sending and receiving working on my Nexus 4 on net10. Just wanted to share the APN settings that worked for me to hopefully help someone else out since it took me a bit of time to get working.
APN: tfdata
Proxy: proxy.mvno.tracfone.com
Port:80
MMSC: http ://mmsc.cingular.com
MMS Proxy: 66.209.11.33
MMS Port:80
all other fields I just left as they were.
Please let me know if this works for you! :good:

vanvalks said:
I've finally got data and MMS sending and receiving working on my Nexus 4 on net10. Just wanted to share the APN settings that worked for me to hopefully help someone else out since it took me a bit of time to get working.
APN: tfdata
Proxy: proxy.mvno.tracfone.com
Port:80
MMSC: http ://mmsc.cingular.com
MMS Proxy: 66.209.11.33
MMS Port:80
all other fields I just left as they were.
Please let me know if this works for you! :good:
Click to expand...
Click to collapse
worked for me - thx!

May I ask what plan are you guys using. And is there throttling?
Sent from my Nexus 4 using xda app-developers app

yoyo_58 said:
worked for me - thx!
Click to expand...
Click to collapse
oops, spoke too soon. images not being received vis mms

This has worked for me just fine for a couple of months now. No other settings have ever worked. Try mms2 if you're still having issues.
Sent from my Nexus 4 using Tapatalk 2

Warbuff said:
May I ask what plan are you guys using. And is there throttling?
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
using net10, pretty sure there's throttling at some point
the following settings gave me everything including receiving mms
Name: Net10
APN: tfdata
Proxy: proxy.mvno.tracfone.com
Port: 80
Username: (Not set)
Password: (Not Set)
Server: (Not Set)
MMSC: h t tp://mmsc.cingular.com
MMS Proxy: mms2.tracfone.com
MMS Port: 80
MCC: 310
MNC: 410
Authentication Type: (Not Set)
APN Type: (Not Set)
APN protocol: IPv4
APN roaming protocol: IPv4
Bearer: Unspecified
here's the link to where i found it
http://forum.xda-developers.com/showpost.php?p=40188181&postcount=49

doesn't work for me
I tried both versions of this APN , both with the MMS proxy name an IP address. I am still unable to receive a text from a Verizon CDMA iPhone 4.

txkcraig said:
I tried both versions of this APN , both with the MMS proxy name an IP address. I am still unable to receive a text from a Verizon CDMA iPhone 4.
Click to expand...
Click to collapse
C- troll job

If you're on Net10 with an AT&T sim card they say upfront that they throttle you at 1.5gb of data in any given month. I have yet to be throttled, but i'll probably hit 1.5gb this month with about a week left so we'll see what throttling is all about. Not sure if they just slow down the connection or completely cut it off, but I should know soon enough!

Be careful!
vanvalks said:
If you're on Net10 with an AT&T sim card they say upfront that they throttle you at 1.5gb of data in any given month. I have yet to be throttled, but i'll probably hit 1.5gb this month with about a week left so we'll see what throttling is all about. Not sure if they just slow down the connection or completely cut it off, but I should know soon enough!
Click to expand...
Click to collapse
I hit some arbitrary limit before they had the 1.5gb cap. I was throttled and it stayed that way for months. I got jerked around by the phone support, email support and even their Facebook page staff for hours trying to get it lifted. It finally took a call to their "executive escalation" call center to resolve. I found that number on Howard Forums. The one that worked for me was 8008765753.

MooneyDriver said:
I hit some arbitrary limit before they had the 1.5gb cap. I was throttled and it stayed that way for months. I got jerked around by the phone support, email support and even their Facebook page staff for hours trying to get it lifted. It finally took a call to their "executive escalation" call center to resolve. I found that number on Howard Forums. The one that worked for me was 8008765753.
Click to expand...
Click to collapse
What kind of data speeds did you have while you were throttled?

vanvalks said:
What kind of data speeds did you have while you were throttled?
Click to expand...
Click to collapse
Usually extremely slow, ~4KB/s (kilobytes). Sometimes a little better, like ~10KB/s. Pretty useless.

Just posting some information in case it helps other people who might be searching like me...
The settings here from Net10 (scroll to "AT&T Network settings") result in no data:
http://www.net10wirelessphones.com/FAQ.html
The settings here from Net10 (click on "Phone Programming" and then "IF YOUR CARRIER IS AT&T") allow data, sms, and MMS:
http://net10sim.com/support.php
HOWEVER with these settings I still have intermittent data issues. For example:
Open Chrome, go to google.com = fast
Search for something = fast
Click the first result = hang, data connectivity lost (Chrome times out and says I am offline)
The settings here from xda behave the same as above:
http://forum.xda-developers.com/showpost.php?p=40188181&postcount=49
To be clear: sms, mms, and data "work" with the xda settings but I still have problems with data dropping. So I'm actually using the settings from "net10Sim.com" instead because they behave the same and require less editing.
I've put in a request with Net10 support to get real, valid, official APN settings but who knows if I'll really get anything.

Seeing the same thing on straight talk...
Now straight talk and net10 are sharing the tfdata APN settings... (Some straight people have been migrated to this tfdata, some are still on att.mvno)
Its really hit or miss... and seems to get better at night..
I can do a speed test and get 6 Mb down in Tulsa ok area, then not be able to load a web page.. I can tell when its acting up because the plus sign next to the H cycles.. On At&t and Net10 (At&t simm) for me that did not used to happened until just a week or so ago. Tmobile's + sign would cycle all the time. Now when I am having difficulty with a page loading I see it cycling.. When things are going "good" (fast page loads, consistent speedtest.net tests) + sign doesn't cycle at all.
Its frustrating to say the least..
Bigtuna00 said:
Just posting some information in case it helps other people who might be searching like me...
The settings here from Net10 (scroll to "AT&T Network settings") result in no data:
http://www.net10wirelessphones.com/FAQ.html
The settings here from Net10 (click on "Phone Programming" and then "IF YOUR CARRIER IS AT&T") allow data, sms, and MMS:
http://net10sim.com/support.php
HOWEVER with these settings I still have intermittent data issues. For example:
Open Chrome, go to google.com = fast
Search for something = fast
Click the first result = hang, data connectivity lost (Chrome times out and says I am offline)
The settings here from xda behave the same as above:
http://forum.xda-developers.com/showpost.php?p=40188181&postcount=49
To be clear: sms, mms, and data "work" with the xda settings but I still have problems with data dropping. So I'm actually using the settings from "net10Sim.com" instead because they behave the same and require less editing.
I've put in a request with Net10 support to get real, valid, official APN settings but who knows if I'll really get anything.
Click to expand...
Click to collapse

Has anyone else been seeing grey bars on the signal icon lately? My phone will shows H+ and full signal, but grey bars which means it's not connecting to google services. Have the apn settings changed recently?

vanvalks said:
Has anyone else been seeing grey bars on the signal icon lately? My phone will shows H+ and full signal, but grey bars which means it's not connecting to google services. Have the apn settings changed recently?
Click to expand...
Click to collapse
I got this all the time, it means the phone can't connect to Google services... Usually also means internet is broken or to slow, when it happens to me nothing would load for several second. Switched to AT&T GoPhone and haven't had a single issue with that again.
Sent from my Nexus 4 using xda app-developers app

It's only been the past month or so that it's been doing that, before that it was fine. I've seen on another thread that the apn settings have changed after the roll out of LTE or that I might need a new sim card possibly.

vanvalks said:
It's only been the past month or so that it's been doing that, before that it was fine. I've seen on another thread that the apn settings have changed after the roll out of LTE or that I might need a new sim card possibly.
Click to expand...
Click to collapse
To be honest, mine started doing it in early August (although MMS has never worked) and I gave up after 4 hours on the phone with their tech support telling me it was an issue with my phone and not their problem. Switched to GoPhone and haven't had a single issue since.
Not sure if this is it either, but an AT&T wireless tech (I work in telecom, this is an actual tech that works on switches and tower sites), that the towers give priority to certain customers like AT&T post/pre paid accounts over MVNOs and if the equipment gets busy it will actually block "nonessential" services like data to lower grade APNs. He said they have seen traffic increases much more than expected from MVNOs in the last couple months... Take it for what's worth I guess.
Sent from my Nexus 4 using xda app-developers app

Well finally got mms working for first time in 2 years. Downloaded a free app that gives you Correct apn settings. It tells you to create two separate apn's, one for mms and one for data. Worked great. It's called tweaker apn.

Shamrock6699 said:
Well finally got mms working for first time in 2 years. Downloaded a free app that gives you Correct apn settings. It tells you to create two separate apn's, one for myself and one for data. Worked great. It's called tweaker apn.
Click to expand...
Click to collapse
2 years?? Wow i wish i would have known. I could have helped you out. I figured this problem was already taken care of. Glad to know you got it working tho.

9505g on ATT help wth LTE

got the google edition in the mail today and set up the PTA apn to try to get LTE on it...
out of the box i got no data at all and the PTA apn doesnt work either.
im stuck usning the old cingular WAP for H+ on it ... called att AND google at the same time and ATT is sayng they cant guarantee i will get LTE since its not an ATT branded phone. Google is saying it should work and told ATT they are full of **** essentially..
any help?

Let's start with the stupid questions. After saving the pta apn did you click the green/blue bubble on the right of the apn
Sent from my GT-I9505 using xda premium

LTE now working!
Tyie101 said:
Let's start with the stupid questions. After saving the pta apn did you click the green/blue bubble on the right of the apn
Sent from my GT-I9505 using xda premium
Click to expand...
Click to collapse
No. This should work out of the box. I was on the phone myself with AT&T and Google for two hours. It's a simple matter of AT&T changing the data plan to LTE, but they won't do it because they do not recognize the IMEI as an AT&T phone. No need to change APN settings. AT&T is basically screwing us. In the coming days I see a LOT of complaints coming. The customer service reps say there is nothing they can do, the network people say there's nothing they can do. Complete nonsense. Now, if you had an LTE data plan PRIOR to switching out phones you're probably going to be OK. It's those of us that were on 3G that will be screwed.
EDIT:
Well, after speaking with endless reps, I found one who was willing to actually do her job. She was sympathetic, did some research, and put in a phony IMEI number that allowed her to upgrade my plan from 3G to LTE. I guess the moral of the story is be persistent, hang up on the reps that say there's nothing they can do and keep trying till you find a rep willing to do their job properly.
By the way, I kept my unlimited status, no worries there.
FUNNY:
I had a call from a sales rep before the issue was fixed. Her solution was "why don't you return your phone, go to an AT&T store, and buy one of ours?"

bleez99 said:
No. This should work out of the box. I was on the phone myself with AT&T and Google for two hours. It's a simple matter of AT&T changing the data plan to LTE, but they won't do it because they do not recognize the IMEI as an AT&T phone. No need to change APN settings. AT&T is basically screwing us. In the coming days I see a LOT of complaints coming. The customer service reps say there is nothing they can do, the network people say there's nothing they can do. Complete nonsense. Now, if you had an LTE data plan PRIOR to switching out phones you're probably going to be OK. It's those of us that were on 3G that will be screwed.
Click to expand...
Click to collapse
which is what i was afraid of since i am on the grandfathered plan for 30 bucks unlimited ... no way in hell im going up to 40+ bucks for 2 GB of data.
and yes, i did choose the radio button for it.
they sent in some form to allow ATT to recognize my IMEI which might allow LTE to come in.. i asked about the plan and everything and no one said it wouldnt work... altho i had feared some people might have been told otherwise.

helix031 said:
which is what i was afraid of since i am on the grandfathered plan for 30 bucks unlimited ... no way in hell im going up to 40+ bucks for 2 GB of data.
and yes, i did choose the radio button for it.
they sent in some form to allow ATT to recognize my IMEI which might allow LTE to come in.. i asked about the plan and everything and no one said it wouldnt work... altho i had feared some people might have been told otherwise.
Click to expand...
Click to collapse
doing research actually, i did find that i even posted that question a few months back somewhere here on XDA...
would you need an upgraded plan to get LTE on ATT even if you have the grandfathered plan ?

helix031 said:
got the google edition in the mail today and set up the PTA apn to try to get LTE on it...
out of the box i got no data at all and the PTA apn doesnt work either.
im stuck usning the old cingular WAP for H+ on it ... called att AND google at the same time and ATT is sayng they cant guarantee i will get LTE since its not an ATT branded phone. Google is saying it should work and told ATT they are full of **** essentially..
any help?
Click to expand...
Click to collapse
You don't need the PTA APN anymore. Just one named phone.
Here's what I have that works perfectly on LTE:
Name: (whatever you want)
APN: phone
Proxy: not set
Port: not set
Username: not set
Password: not set
Server: not set
MMSC: http://mmsc.mobile.att.net
MMS proxy: proxy.mobile.att.net
MMS port: 80
MCC: 310
MNC: 410
Auth Type: not set
APN type: default,supl,mms,hipri
APN protocol: IPv4
APN roaming protocol: IPv4
Bearer: unspecified
MVNO type: none
This worked perfectly out of the box for me. I was reading somewhere that they don't really use the PTA APN anymore because that was when they were first turning on their LTE network and now this "phone" APN auto detects and works normally.

ack154 said:
You don't need the PTA APN anymore. Just one named phone.
Here's what I have that works perfectly on LTE:
Name: (whatever you want)
APN: phone
Proxy: not set
Port: not set
Username: not set
Password: not set
Server: not set
MMSC: http://mmsc.mobile.att.net
MMS proxy: proxy.mobile.att.net
MMS port: 80
MCC: 310
MNC: 410
Auth Type: not set
APN type: default,supl,mms,hipri
APN protocol: IPv4
APN roaming protocol: IPv4
Bearer: unspecified
MVNO type: none
This worked perfectly out of the box for me. I was reading somewhere that they don't really use the PTA APN anymore because that was when they were first turning on their LTE network and now this "phone" APN auto detects and works normally.
Click to expand...
Click to collapse
right, the issue is i didnt have an LTE phone prior. I had a 3g GS2 so my plan isnt configured to work on the LTE network.
for the Iphone they were honoring the old unlimited data plans for 30 dollar a month just changing the name of the plan to the new one (same price, still unlimited, upto 5GB before throttle)
someone just did this on the phone for me and i did get data using the phone APN now (no more using the old 3g only APN)
hopefully when i get out of the building i work in i can get some LTE reception and see if it worked.

helix031 said:
right, the issue is i didnt have an LTE phone prior. I had a 3g GS2 so my plan isnt configured to work on the LTE network.
for the Iphone they were honoring the old unlimited data plans for 30 dollar a month just changing the name of the plan to the new one (same price, still unlimited, upto 5GB before throttle)
someone just did this on the phone for me and i did get data using the phone APN now (no more using the old 3g only APN)
hopefully when i get out of the building i work in i can get some LTE reception and see if it worked.
Click to expand...
Click to collapse
If you haven't had an LTE phone prior, you probably don't have LTE data enabled through AT&T yet. What data plan are you on specifically? Does it say 4G for Smartphones or LTE for Smartphones? I'm thinking you're going to have to talk to AT&T and get them to switch your plan...

ack154 said:
If you haven't had an LTE phone prior, you probably don't have LTE data enabled through AT&T yet. What data plan are you on specifically? Does it say 4G for Smartphones or LTE for Smartphones? I'm thinking you're going to have to talk to AT&T and get them to switch your plan...
Click to expand...
Click to collapse
thats what they just did. they had the LTE plan unlimited for 30 a month they grant to grandfathered data plans when the iphone 5 came out
i am getting data on the PHONE apn now but still no LTE speeds...
i will call back later on in the day if i dont see LTE speeds coming in (speed test now only gave me 4 down)
they also apparantly sent in a form to get the IMEI covered by ATT which would guarantee they can provide :LTE speeds

went by att store and the guy there said it happens all the time with devices from south america (im in miami)
went to the back, grabbed an IMEI off a boxes device. applied that to my account... BAM ... LTE

I had the same problem with a rep telling me that the phone can't be found in their system. From the research I've done, it looks like you can give them any IMEI number off of a AT&T branded LTE phone and their system will switch your plan over.
Here's a good thread about it: http://forum.xda-developers.com/showthread.php?t=2021401

Best Buy Sale 9.99

Moto E LTE on sale BestBuy 9.99
enjoy!

wogeboy said:
Moto E LTE on sale BestBuy 9.99
enjoy!
Click to expand...
Click to collapse
Is this smartphone root-able to use with any 3-rd party cellphone provider?

2habibie said:
Is this smartphone root-able to use with any 3-rd party cellphone provider?
Click to expand...
Click to collapse
If it's Verizon, then no.

wogeboy said:
Moto E LTE on sale BestBuy 9.99
enjoy!
Click to expand...
Click to collapse
fendaris said:
If it's Verizon, then no.
Click to expand...
Click to collapse
Thank you.

2habibie said:
Thank you.
Click to expand...
Click to collapse
Not rootable- but you don't need root to use this phone with other gsm providers. See other threads.

and in my coutry its still for over 100$ without 5.1 update
motorola is realy retarded

2habibie said:
Is this smartphone root-able to use with any 3-rd party cellphone provider?
Click to expand...
Click to collapse
iks8 said:
and in my coutry its still for over 100$ without 5.1 update
motorola is realy retarded
Click to expand...
Click to collapse
I thought I read somewhere they're pretty much abandoning it.

iks8 said:
And in my coutry it's still for over 100$ without 5.1 update
Motorola is really retarded
Click to expand...
Click to collapse
This was part of a Black Friday deal, therefore it has nothing to do with the pricing in other countries. Amazon even had a 50" TV for $149 and there were many other deals...

yea, it's the bestbuy black friday $9.99 deal. It's even cheaper than usb or mp3 player. BEST DEAL
You can use it as backup phone or mp3 player.

Any way to get rid of Verizon activation that pops up every reboot?

This is for certain type of Best Buy customers.. requires some type of special account i heard.

I'm trying to bypass now. Wish me luck (getting on a regular Verizon account)

I managed to buy a couple of these for the Family plan on T-Mobile. I should receive them in a few days, so I'm doing my research now I've read the thread on switching the phone to GSM. Here's the plan so far. Any feedback is welcome:
- Put in Tmo sim and microSD
- Switch to GSM
- Subscribe to TMo Family plan (over internet or call in?)
- After activation, turn off update to 5.1 (do I need band 12 in southern CA? If not, any problems with updating to 5.1 ota?)
- Remove Verizon apps
Did I miss anything?

saidiadude said:
I managed to buy a couple of these for the Family plan on T-Mobile. I should receive them in a few days, so I'm doing my research now I've read the thread on switching the phone to GSM. Here's the plan so far. Any feedback is welcome:
- Put in Tmo sim and microSD
- Switch to GSM
- Subscribe to TMo Family plan (over internet or call in?)
- After activation, turn off update to 5.1 (do I need band 12 in southern CA? If not, any problems with updating to 5.1 ota?)
- Remove Verizon apps
Did I miss anything?
Click to expand...
Click to collapse
I recently switched two of these over to T-Mobile's family plan, and it isn't as easy as you might expect, although still very manageable.
http://forum.xda-developers.com/moto-e-2015/general/how-to-verizon-moto-e-2015-gsm-network-t3098953
This thread was incredibly useful, the green instructions are what you'll likely need to follow. Make sure you have adb on your computer beforehand. Once you finish with that process, you will need to enter in your T-Mobile APN.
Name: T-Mobile
APN: fast.t-mobile.com
Proxy: <Leave in Blank>
Port: <Leave in Blank>
Username: <Leave in Blank>
Password: <Leave in Blank>
Server: <Leave in Blank>
MMSC: mms.msg.eng.t-mobile.com/mms/wapenc
MMS proxy: <Leave in Blank>
MMS port: <Leave in Blank>
MCC: 310
MNC: 260
Authentication type: <Leave in Blank>
APN type: default,supl,mms
APN Protocol: IPv6 (Not sure if you need to change this, but I did)
APN roaming Protocol: IPv4
Bearer: Unspecified
MVNO type: None
MVNO value: Not set
After this, I ran into an issue with the network connection flickering. I'd have 4G LTE for a second, then no signal, back and forth. To solve this, I followed these instructions:
thisisthedroid said:
I'll elaborate and include what to do to get it to work with T-mobile mvno:
Download the Network app from the store.
Tap the square button on the bottom right of the phone to bring up all recent apps, and clear away everything.
Go to settings -> more -> cellular networks. Notice "Preferred network type" is on lte/cdma. Leave this screen alone.
Tap the circle button at the bottom of the phone to get to the home page.
Open the Network app.
Near the bottom you can "Set preferred network type." It'll be set on lte/cdma.
Below that, there's "turn off radio".
Turn off the radio, and then change the preferred network type to lte/gsm.
Tap the square button to bring up the recent apps, and tap the "cellular networks" screen that you were on earlier.
See if "Preferred network type" has changed to "global". If it has, then the following steps will work. If it hasn't, then skip to the bottom.
Tap the square button and go back to the Network app. Turn on the radio.
Quickly tap the square button and go back to the cellular networks screen.
When "4G LTE" shows up in the notification area, quickly tap "global" and you'll have the choice of 4G, 3G, 2G. Hurry and tap 4G before "4G LTE" disappears.
Now you've got 4GLte, and you'll just need to add an apn as well as select your network operator.
4G still works for me after a reboot. I'm on Consumer Cellular (T-mobile mvno), if it matters. I'm sending/receiving texts and calls, and data works.
If it doesn't say "global", then go back to the Network app, pick some other preferred network type, like lte/gsm/cdma, and try this again.
To get "global," you'll need some combination of turning the radio on and off, and picking lte/gsm or lte/gsm/cdma.
Maybe turn off the radio, pick lte/gsm, turn on the radio, THEN "global" shows up. I don't remember exactly.
Maybe pick a random preferred network, turn the radio on and off, and then go back and pick lte/gsm and look for "global".
But I do remember doing this process randomly dozens of times and whenever "cellular networks" said "lte/cdma" there never was a choice of 4g, 3g, 2g.
However, three times I managed to get "global" to show up, and each time I tapped on it the popup gave me the three "G" choices.
The third time I got "global" to show up, I managed to tap 4G fast enough, and it's been smooth sailing ever since.
One minor annoyance now though: whenever I restart the phone, I get a notification that the sim is not a Verizon one.
Thanks, lostnyc! Good luck everybody!
Click to expand...
Click to collapse
This took a little while to work, but ended up fixing the issue. You might have to fiddle with networks a good deal, but it will eventually work.
Or maybe you can bypass most of the challenge I had here and get lucky. Let me know if you need any help, I'd love give any assistance I can.

Thanks for the quick reply Mouse_exe. Did you upgrade to 5.1? Any issues with the upgrade, specifically related to using band 12?

xpmule said:
This is for certain type of Best Buy customers.. requires some type of special account i heard.
Click to expand...
Click to collapse
That was during the early access or whatever BB calls it. I don't have their membership & was able to buy 2 of these.

saidiadude said:
Thanks for the quick reply Mouse_exe. Did you upgrade to 5.1? Any issues with the upgrade, specifically related to using band 12?
Click to expand...
Click to collapse
I believe the device comes with 5.1 already, at least both of mine did.
The main issues were just connection based, but those were fixed with the method I mentioned. The one device didn't update the play store, so it was crashing. I just downloaded an updated version from a Google search to fix that.
The device has bands 2 and 4, no band 12. Works well overall, but you're not going to be getting the reception of band 12. :/ Still though, great phone for 10 bucks.
EDIT: Bands 2 and 4 are very common, you shouldn't need band 12 in the phone to get signal.

You don't need any special account, just buy it instore or online on blackfriday.

Bought 3, using on on T-Mobile and it works fine. Also managed to swap in a post-paid Verizon SIM into one of them and it works fine.
NOTE: REMOVE VERIZON PREPAID SIM BEFORE YOU EVEN POWER IT ON

<<One minor annoyance now though: whenever I restart the phone, I get a notification that the sim is not a Verizon one.
Thanks, lostnyc! Good luck everybody!>>
Not sure if this helps , but saw this in another thread/post:
Originally Posted by inneyeseakay
Obviously can't use TIBU to disable apps because we don't have root... HOWEVER, I found that the debloater.exe works wonders for disabling apps (disable com.motorola.setupwizard.xxxxx to get rid of SIM NOT FROM VERIZON warning)
UPDATE!!!
DISABLED vzwAPNpermissions.apk & vzwAPNservice.apk and was able to change sims without having to redo the settings in ADB!!
Also, the phone automatically found my APN settings on different SIM cards after doing this!!