What is your highest antutu benchmark score without overclocking. What is your highest score when overclocked. Share your cpu clock or a screenshot of antutu benchmark. I just got 5993 on my HDMI play with a few tweaks. Let me Know!
psxpetey said:
What is your highest antutu benchmark score without overclocking. What is your highest score when overclocked. Share your cpu clock or a screenshot of antutu benchmark. I just got 5993 on my HDMI play with a few tweaks. Let me Know!
Click to expand...
Click to collapse
5993 with overclocking or without overclocking? and with what tweaks?
Ciccio0184 said:
5993 with overclocking or without overclocking? and with what tweaks?
Click to expand...
Click to collapse
Adrenoboost v7 and some build.prop tweaks some of which I did myself that I came up with. No supercharge or ram tweaks. Also no storage tweaks. Feels quite fast. Also zero overclock just got 6167!
Sent from my R800x using XDA Free mobile app
psxpetey said:
Adrenoboost v7 and some build.prop tweaks some of which I did myself that I came up with. No supercharge or ram tweaks. Also no storage tweaks. Feels quite fast. Also zero overclock just got 6167!
Sent from my R800x using XDA Free mobile app
Click to expand...
Click to collapse
I just got 5082 without overclocking, with some build.prop tweaks and ram tweaks. What build.prop tweaks are you using?
Ciccio0184 said:
I just got 5082 without overclocking, with some build.prop tweaks and ram tweaks. What build.prop tweaks are you using?
Click to expand...
Click to collapse
Heres some of them ill post the rest later
Sent from my LT28i using XDA Free mobile app
Related
I went and did a quadrant test and scored worse than the normal evo, and I'm rooted and running cyanogenmod 7. I got 956 average on 3 tests. PS, performance 1075 on Setcpu
and?
quadrant means nothing
Sent from my HD2 using XDA Premium App
Run smartass at 1190.
Also which kernel?
Does Setcpu have a smartass setting? And the stock cyanogenmod 7 kernel.
Evo 4G
Cyanogenmod 7
Blameme said:
Does Setcpu have a smartass setting? And the stock cyanogenmod 7 kernel.
Evo 4G
Cyanogenmod 7
Click to expand...
Click to collapse
Use tiamat or savanged
Also why use setcpu with the performance settings in cm7?
The best way to improve your Quadrant score is to uninstall Quadrant and stop worrying about it....
Ok. But where's the smartass setting?
Evo 4G
Cyanogenmod 7
Blameme said:
Ok. But where's the smartass setting?
Evo 4G
Cyanogenmod 7
Click to expand...
Click to collapse
Performance settings > CPU settings > governors
I don't have that. Conservative, interactive, performance, userspace, powersave, and ondemand.
Evo 4G
Cyanogenmod 7
Blameme said:
I don't have that. Conservative, interactive, performance, userspace, powersave, and ondemand.
Evo 4G
Cyanogenmod 7
Click to expand...
Click to collapse
Yeah you need to run a different kernel like I said.
Alright, I downloaded tiamat. Whats a good setup for those settings then?
Evo 4G
Cyanogenmod 7
Blameme said:
Alright, I downloaded tiamat. Whats a good setup for those settings then?
Evo 4G
Cyanogenmod 7
Click to expand...
Click to collapse
Smartass and 1190 I find is best balance for battery life and performance.
QUADRANT IS NOT A GOOD BENCHMARKING TOOL.
Check out: http://www.youtube.com/watch?v=DE0hDwfzFOk&feature=player_embedded#at=322
Quit using Quadrant it is easily duped. Your scores can be increased easily in quadrant. You might even be able to follow the video and get better scores, so that way it will make you feel better.
Why is everyone so offended by the fact that this guy just wants answers on how to improve his benchmark?
Who cares if you find no value in it, he does.
Answer his questions and move on or ignore the thread.
I'm first going to reiterate what everyone else has said... don't worry about Quadrant, or benchmarks or any of that.
with that out of the way, the absolute best I've ever achieved is when I first got my phone and was pushing for high Quadrant numbers, and I was on an AOSP Rom and installed CM Turbo Kernel, like... 6. something, and I turned the "Turbo" feature on. got like 1850 after a few attempts. that's the absolute best, and it wasn't stable. was running 1190, on Hardware 002, which my phone did NOT like. I get about 900 now and I'm happy because my phone is usable for a full day!
mattykinsx said:
Yeah you need to run a different kernel like I said.
Click to expand...
Click to collapse
Running a different kernel isn't the issue. Having the min clockspeed set low and running a benchmark that doesn't tax the phone enough for it to ramp up the clockspeed is the issue. Set the min and Max to 998 or more then run the benchmark.
Sent from my PC36100 using XDA Premium App
Rem3Dy said:
Running a different kernel isn't the issue. Having the min clockspeed set low and running a benchmark that doesn't tax the phone enough for it to ramp up the clockspeed is the issue. Set the min and Max to 998 or more then run the benchmark.
Sent from my PC36100 using XDA Premium App
Click to expand...
Click to collapse
Not what I was referring to.
He asked why he didn't have the "smartass" governor available.
My score : 1469:|
No-frills cpu apps
Min : 134 mhz
Max : 1402 ghz
Governor : intetactiveX
I/O : cfq
Bit dissapointed when my friend on x10 miui score was 1996.... Sigh.... :-(
Sent from my R800i using xda premium
Quadrant is overrated, use antutu. It's harder to cheat a score on antutu
Thanks for the info mate.... But i'm actually searching for a better optimization OC setting for my xperia play phone like less battery drain, less lag, etc.... B-)
Sent from my R800i using xda premium
Edit : sd test not working after update to antutu v2.6.... That's why i'm uninstall them & only using quadrant right now, many thanks....
Sent from my R800i using xda premium
Latest Quadrant scores are low only.
I get 1250 w/o any tweaks and no overclock.
--
Maddy
Hey guys with all the quadrant scores being posted everywhere, I haven't seen a topic dedicated to these alone. So that's what this thread is for. Here are the rules:
Rule 1: when you post a quadrant please tell everyone what Rom/Kernel you are running so if anyone wishes to follow your steps they may do so.
Rule 2: Please merge your posts if your going to post one after another or simply edit your post and update it to maintain order.
That's it. Thanks guys and here is my quadrant. AOKP 40.1 devil .97 with v6 super charger and kak
Sent from my SCH-I500 using xda premium
It's a freakin' rocket-sled from hell it is!!
Fo realz yo!!!
AOKP 40.1
Devil3 .96
1400 max-200min, 800-200 sleep, no OC\UV
V6 Supercharged 100%, KAK with IO Sched(SIO) tweaks tweaks, 3G turbo
Yeah, it's pretty zippy, I must say!!!!
Azuma73 said:
Fo realz yo!!!
AOKP 40.1
Devil3 .96
1400 max-200min, 800-200 sleep, no OC\UV
V6 Supercharged 100%, KAK with IO Sched(SIO) tweaks tweaks, 3G turbo
Yeah, it's pretty zippy, I must say!!!!
Click to expand...
Click to collapse
Hey azuma how did you get your CPU so high? Also I need you to test something for me. Antutu tels me I'm pulling over 3200 in a quad. But quad pro tells me just over 2600. I'm unsure which to believe
Sent from my SCH-I500 using xda premium
I believe antutu runs more tests than quadrant, therefore showing a higher score, but I could be mistaken?
My phone IS fast and stable, but now I think I need to work on better battery!?
Sent from my SCH-I500 using xda premium
Dim your screen. Go to (I think development) and put a chexk in kill background processes and leave no programs running. I also use toolbox pro to freeze apps that continuously run and use the mobile web version of them.
Sent from my SCH-I500 using xda premium
Seems like you started this thread so we could show off each of our own tweaks and roms. I came here for a little advice too. That way I could see some big performance increases to my phone.
(first screen capture)
old rom: AOKP 40
old kernel: devil .79
old CPU governor: smartassv2
min-max frequency: 200-1400
(second screen capture)
Current rom: AOKP 40
Current kernel: devil .79
Current CPU governor: conservative
min-max frequency: 100-1400
I was curious I used the ROM setting built into the AOKP rom to set the cpu frequency, but should i use devil kernel config or manager or nstools. or is that just for live OC? My cpu frequency is set at boot. My quadrant scores are pretty low. Any tips for a noob?
MunkinDrunky said:
Seems like you started this thread so we could show off each of our own tweaks and roms. I came here for a little advice too. That way I could see some big performance increases to my phone.
Current rom: AOKP 40
Current kernel: devil .79
Current CPU governor: smartassV2
min-max frequency: 200-1400
I was curious I used the ROM setting built into the AOKP rom to set the cpu frequency, but should i use devil kernel config or manager or nstools. or is that just for live OC? My cpu frequency is set at boot. My quadrant scores are pretty low. Any tips for a noob?
Click to expand...
Click to collapse
Yeak I got a couple for ya.
Go to settings, Developer settings, then put a check mark in Force GPU Rendering Make sure the Max CPU is 1400 low is 100 Governer I have set to conservative, ZRam is set for 100mb. Try those settings and reboot before you test again
vrahn said:
Go to settings, Developer settings, then put a check mark in Force GPU Rendering Make sure the Max CPU is 1400 low is 100 Governer I have set to conservative, ZRam is set for 100mb. Try those settings and reboot before you test again
Click to expand...
Click to collapse
Ok I believe the Force GPU rendering definitely made the biggest difference. My 2d and 3d scores jumped up. I updated my post. For some reason in the ROM controls it took a couple tries for the new cpu and governor settings to stick after reboot.
5042 on my stock rooted gs3
Motorola Atrix4G
CM7
Oc'd to 1.45
Sent from my MB860 using xda app-developers app
ATRIXXIRTA said:
Motorola Atrix4G
CM7
Oc'd to 1.45
Sent from my MB860 using xda app-developers app
Click to expand...
Click to collapse
Nice I/O score!!!
Sent from my SCH-I500 using xda app-developers app
vrahn said:
Nice I/O score!!!
Sent from my SCH-I500 using xda app-developers app
Click to expand...
Click to collapse
Thanks!
Cm7 turns this phone into one of the beastlyiest devices going. Not sure if beastlyiest is a real word, but its a good way to describe the awesomeisity of Cm7.... haha I'm a grammar god!!
Sent from my MB860 using xda app-developers app
MunkinDrunky said:
Seems like you started this thread so we could show off each of our own tweaks and roms. I came here for a little advice too. That way I could see some big performance increases to my phone.
(first screen capture)
old rom: AOKP 40
old kernel: devil .79
old CPU governor: smartassv2
min-max frequency: 200-1400
(second screen capture)
Current rom: AOKP 40
Current kernel: devil .79
Current CPU governor: conservative
min-max frequency: 100-1400
I was curious I used the ROM setting built into the AOKP rom to set the cpu frequency, but should i use devil kernel config or manager or nstools. or is that just for live OC? My cpu frequency is set at boot. My quadrant scores are pretty low. Any tips for a noob?
Click to expand...
Click to collapse
MunkyDrunky that still seems a little low considering what everyone else is pulling. Try this as well. And I'll include the files from my phone when I get to my computer with instructions.
Get if not already had toolbox
And go to performance and SD card boost. Change the value to 2480 (I think it is. It will give you a preferred high set)
Go to app manager and freeze any constantly running services that you would normally use such as yahoo mail Facebook etc. And use the mobile web versions to help save ram. I'll include v6, 3G, and a few other files you'll need as well.
After the SD boost and app freeze reboot phone into recovery and wipe cache and dalvik. Then reboot and try your test again.
Sent from my SCH-I500 using xda app-developers app
vrahn said:
Get if not already had toolbox
And go to performance and SD card boost. Change the value to 2480 (I think it is. It will give you a preferred high set)
Click to expand...
Click to collapse
Ok Ive used Rom toolbox when I was using the Gummy rom. Would I still use devil kernel config or manager for the cpu and ram free value changes? How do I make sure the changes will always stick, ive had trouble with that after reboot.
vrahn said:
Go to app manager and freeze any constantly running services that you would normally use such as yahoo mail Facebook etc. And use the mobile web versions to help save ram. I'll include v6, 3G, and a few other files you'll need as well.
After the SD boost and app freeze reboot phone into recovery and wipe cache and dalvik. Then reboot and try your test again.
Sent from my SCH-I500 using xda app-developers app
Click to expand...
Click to collapse
I should say my running apps are usually not many. Right now its Rom Control, Android keyboard, Maps, Nova Launcher, and Rom Toolbox, and Superuser. I test my gps a lot with Maps. Otherwise I dont have a lot running since this isnt my daily use phone. I want it to be again but want to get it flying first.
Thank you for the good advice and help. Trying SD boost now...will try v6 and 3g speed boost later
I use v6 supercharger, sd boost, and app quarantine while at 1300 MHz and I still only get around 1500...I feel like that's pretty low for AOKP MS6 with devil right?
rjkxb2 said:
I use v6 supercharger, sd boost, and app quarantine while at 1300 MHz and I still only get around 1500...I feel like that's pretty low for AOKP MS6 with devil right?
Click to expand...
Click to collapse
i also get very low scores on my fascinate.
What settings are you using with v6
Sent from my SCH-I500 using xda premium
vrahn said:
What settings are you using with v6
Sent from my SCH-I500 using xda premium
Click to expand...
Click to collapse
fix emissions, 3g enhancements, wheel alignment, minfrees: 8,14,55,70,85,100 MB. It says I'm 100% supercharged. I feel like there has been an improvement I'm just thinking I may have missed some setting that would help even more.
my galaxy s3 is just a little better than the fascinate.
Sent from my SCH-R530U using Tapatalk 2
sageDieu said:
View attachment 1195920
my galaxy s3 is just a little better than the fascinate.
Sent from my SCH-R530U using Tapatalk 2
Click to expand...
Click to collapse
I hit 5694 with mine today
Hello,
I overclocked my cpu to 1944mhz and gpu to 487mhz using fauxclock (i'm rooted with faux kernel)...
But when i benchmark i have lesser scores (1600 on geekbench and 13000 on antutu)...
Can someone explain me why
Thanks
Thermal throttling.
Sent from my Nexus 4 using xda app-developers app
Eric-1987 said:
Thermal throttling.
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
Hi,
Probably, yes. Plus Faux kernel is not the kernel to run benchs. Faux focused on "real" performance on daily use (UI, games) and his kernel is not a kernel for benchs. This is not a critic and I didn't say the other kernels are not optimized for daily use
faux123 said:
Yes, I play games to test my kernels, it's the BEST benchmark of anything, way better than any synthetic benchmarks
I also play NSF, DeadTrigger, Temple Run, AngryBirds and MetalSlug series to check all different aspect of gaming performance. My kernel may not score the highest in synthetic benchmarks, but it does well in real Games and Apps :victory:
........................................
my kernel is very smooth for normal apps and games but does poorly with these artificial apps like benchmarks and stress tests
Click to expand...
Click to collapse
But you can try another governor or tweaks some governor settings.
Thanks for the answer i noticed higher fps on real racing 3
That mean the kernel isn't good for bench that's it !
Btw is it possible to disable thermal throttling
Poustic said:
Thanks for the answer i noticed higher fps on real racing 3
That mean the kernel isn't good for bench that's it !
Btw is it possible to disable thermal throttling
Click to expand...
Click to collapse
No. Don't even think about it. Another possibility is that your phone can't handle the 1.9 overclock, hence lagging.
Sent from my Nexus 4 using xda app-developers app
Thanks for your feedback!, Ive found the best setup!
Higher my friend.
Sent from my R800i using xda app-developers app
JunDavis said:
Higher my friend.
Sent from my R800i using xda app-developers app
Click to expand...
Click to collapse
Herro there
So what set cpu setup u rocking?
Lagfree
Min - 230 or whatever
Max 1612
Usually on 1612
IO - Sio
Sent from my R800i using xda app-developers app
JunDavis said:
Lagfree
Min - 230 or whatever
Max 1612
Usually on 1612
IO - Sio
Sent from my R800i using xda app-developers app
Click to expand...
Click to collapse
Thanks man, ill try your set up out after my xplay has charged and will post results later of how smooth it is with mc4 and some other games like rr3
JunDavis said:
Lagfree
Min - 230 or whatever
Max 1612
Usually on 1612
IO - Sio
Sent from my R800i using xda app-developers app
Click to expand...
Click to collapse
I tried out your Set CPU setup and it was kind of bad, because of the lagfree governor,i did some research and i found a thread explaing all governors and lagfree doesn't actually make your phone "Lag free" it saves battery by throttling it down to the minimum clock speed for a simple task but when it needs more juice it will throttle higher providing more performance, but it doesn't work well as i have had regular force closes with apps like FlipBoard, Falcon Pro and messaging (which force closed alot)
Thanks anyways for contributing
Pizza_Dox said:
I tried out your Set CPU setup and it was kind of bad, because of the lagfree governor,i did some research and i found a thread explaing all governors and lagfree doesn't actually make your phone "Lag free" it saves battery by throttling it down to the minimum clock speed for a simple task but when it needs more juice it will throttle higher providing more performance, but it doesn't work well as i have had regular force closes with apps like FlipBoard, Falcon Pro and messaging (which force closed alot)
Thanks anyways for contributing
Click to expand...
Click to collapse
I didnt use the lagfree governor is said its lagfree.
The governor i used was Darkside. From the new lupus stock GB/ICS kernel.
JunDavis said:
I didnt use the lagfree governor is said its lagfree.
The governor i used was Darkside. From the new lupus stock GB/ICS kernel.
Click to expand...
Click to collapse
Sorry man for the mistake
I will try to read better next time,
I am currently using Doom Kernel so i don't have the darkside governor.
I will try the lupus Kernel maby tomorrow as i need my phone for social purposes right now,
OMG!!!
JunDavis said:
I didnt use the lagfree governor is said its lagfree.
The governor i used was Darkside. From the new lupus stock GB/ICS kernel.
Click to expand...
Click to collapse
Awesome stuff man.
I decided to install Lupus Kernel (720p) and I failed so many times because ADB wasn't detecting my phone in fastboot and reason is because i use a mini usb hub (it connects into 1 hub and makes 5 hubs) so adb and fastboot dident have direct conntact with my phone and today i had a strange feeling and pluged it in to main usb port on my pc and it worked like a charm,i flashed lupus and i am enjoying it.
I think it is considerably faster that Doomkernel and smoother AND reliable,i used to get random force closes every now and then but now its super smooth and Touch screen response seems to be 100x better,
I also tried out your setup and shadowgun,Dead trigger(ULTRA GFX setting) and MC4 runs smooth at around 50 FPS
Glad I could help!
Sent from my R800i using xda app-developers app
Lupus ICS+GB Or Just Normal GB
Im Currently seeing what i can get the most speed out of what is better and does zram help with gaming
I don't think zRam helps with gaming that much,u might get 1-2 FPS boost
Sent from my R800i using xda app-developers app
Pizza_Dox said:
I don't think zRam helps with gaming that much,u might get 1-2 FPS boost
Sent from my R800i using xda app-developers app
Click to expand...
Click to collapse
Yes, it is true