Related
Hello,
because my posting in this forum wasn'n answered i tried to fix together with Mr. Wolf from Wolfsoft (www.wolfsoft.de - also great for fast XDA RAM-Upgrades) with the informations i found.
Everytime i write the i did something - i mean - we did it! We worked hard together for this solution.
-----------------
First:
Maybe, surely you can destroy you XDA-ROM more than it was destroyed before. I not guarrante or take responibility for any errors or damages occuring while trying the next steps.
Situation:
I upgraded my german O2-XDA in the wrong way. After this I had the following problem:
- The O2-bubbles appearing after soft- or hard resetting the XDA are displayed for 3 or 4 minutes. In the right bottom corner of the display the Version of WinCE ist dissplayed (3.14), after some times someting more was shown but that seemes to be from a crashed source.
- After the "pling" a white screen with a blue bar on the top is displayed. The screen-light doensn't turn off. Nothing more happened, after 20 or 30 Minutes the XDA performs a soft reset automatically - after this the same problems occuring
Requrements I needed to fix my problem:
- 1 (better 2 SD-Cards with minimum 32MB Capacity)
- XDA Cradle connected to the PC and Power
- in some cases 1 Charging cable (USB or Power) with a connector for the XDA
- The Program A and Program B - Files provided by german O2 website
- The repair.zip-File provided by XDA-Developers
- A second XDA or a SD-Card-Reader connected with your PC
- many time
- Your XDA must have a working bootloader (mine was Version 5.15), try it by holding the Power-button while performing a soft-reset.
What I did:
- After entering the Wallaby-Bootloader an "gsm-error" - message appears after 1 minute of "wait"
- I entered the SD-Card-Menu by pressing the Contacts-Button on the left-top of the XDA
- I choosed Write CE to SD in order to save my original CE in order to avoid unuseful Questions in case of repair-fail by O2-Support
- After this I performed a soft reset an waited for 1 or 2 Minutes after the white screen appeared
- While tis time write the contents of the unzipped repair.zip to the SD-Card using the SD-Card-Reader or the second XDA
- Now i pressed the "Volume" - Button on the left side for many times, after some trys (if it is not working perform a soft reset and try new) I saw a non-working Today-Screen
- Now insert the SD-Card on you have written the files from repair.zip
- There are 2 possibel reactions:
First: You get a message to format your SD - DO NOT!!!! In this case remove your SD-Card, connect your XDA with the Charging Cable and perform a soft reset. It is okay that there is no charging light. After you entered the Today-Screen insert the SD - do not remove the Charging-Cable! Then it will work.
Second: Installing beginns without any problems
Now your Radio Stack-Module will beginn to be updated. In my case I got the 1% Error discussed in the forum.
- Remove the Power cable, connect your cradle with the PC and the Power, perform a soft reset and wait what is happening. After the error occurs don't push the ok-button. Simply press the start-tab (or anywhere other excluding the message). Now take the XDA out of the cradle and after this put it in again, still with the error message on the screen. Now an active sync connection will be shown on both, your XDA and the PC! If you have this case, it looks good.
- If this doesn't work, replace the RSUpgrade.sa.cab-File from the repair.zip with the same named File, whats included in the program_B.exe (extract first, you will find the result in <Harddisk-Device:\Programme\Programm B) and writhe both on your SD
- Soft reset the XDA, ignore all errors, do not put the new written SD-Card in - open the Active sync-connection and delete the both newest files in the Windows-Directory of your XDA. If you can't delete, rename the file. After this perform a new soft reset.
- You will get a "file not found error". Try to temove and insert your XDA in the cradle to get an active sync-cennection. If this doesn't work insert the new written SD
- Try new flashing again again, maybe it works. If not try to push on the screen and remove and reinsert your XDA in the cradle to get a Connection.
- If there is no possibility to get a connection - i do not know any futher solutions - sorry.
If you get the connection, perform the normal Flashing with Program A provided by your Provider. After this is successfully completed you will see the loading-LED again! Congratulations!
If this is completed charge your Battery to at least 70% - be patient, it will take up to 1 Hour!
After this perform Programm B provided by your Provider. If this successfully completes - Congratulations - you are up and running!
I don't know, if I had happy circumstances, but this worked to gat my working XDA back!
If it do not work, use the first SD-Card containing your old CE to copy back your old ROM in order to not loose your support by your Provider. Simply insert the card into your XDA and perform a soft-reset while holding the Power-Button. Everything looks broken but original!
Please feedback in the XDA-Forum-Thread, if it worked at your XDA or if you have any hints for improvements this steps. Thank you!
Best regards from Berlin/Germany to all XDA-Fans like I am!
Miwu
Very detail.....thanks a lot ! :lol:
Tried your solution but i don't know which files i should delete cause when i delete the latest two files i get no error message...
When trying to install Programm a anywway i get a Connect Power Message and the installation stops.
Edit:
I managed to get the file not found error by renaming the RsUpgrade executable but still get the Power Adapter not plugged in Error...
So it would be very important to know which Programm A you used.
Hello,
@ianrush
Have you been able to get an active sync connection as I described?
You have to delete the file causing the Radio-Stack-Update after restart, I think they are located in the Windows directory of your XDA. If you let your XDA order the files by date the 2 newest files are the ones for updating the Radio Stack and causing the 1%-error. In deleting these files you can get your XDA booting without starting the gsm and getting the Active-Sync-connection. To break up the Installation you must delete these files (i remenber that on (the one that must be renamed) was only 35k or in this area, the other one was much larger).
After deleting and restarting by soft reset you don´t get the 1%-error-message, but another one like "The file can´t be found). But if you see this message (do not press okay!!!!!) you can use your Active-Sync-Connection to flash with Programm A and after this programm B.
The files (germen version) are located here.
Klick at the link "Download Software-Update" and accept the conditions by clicking "Akzeptieren". After this a new window is displayed for downloading the Software. The versions are:
CE: Version 3.19.01 -
Radio Stack Version 4.21
"Teil 1" means Programm A
"Teil 2" means Programm B.
Remember, it is the german version with some german specials like the "Homezone". But you can turn it off and while I see, that you are from Austria, I think you won´t have any problem with the language...
Isn´t it very strange, that 2 german speaking people trying find solutions in english??? :?
Best regards from Berlin!
Michael
I have no problem starting an Active Sync Connection, my problem is, that i get this odd Error Message which tells me to plug in the Power Adapter, which is obviously connected...
There is a much easier way of getting rid of the Flash Prog bei simply deleting the RsUpgrade link in the Auto Start Folder in the wwindows directory and its also possible to start an Connection via AS.
My real problem is the battery charge check before the real flashing of the RSU.
I tried it with the mentioned O2 files and also with Tmobile.at/de files.
A solution may be to "crack" the installation file or to write a small prog wich tells PPC that the battery is chraged.
Many thanks for your help, but it didnt solve the problem for me.
PS: Well its an English Forum so i think we should stay in that language
Oh, I forgot to write that one.
The charging light, wich may be an indicator for the XDA-OS for the supplied Power came back as we installed the O2 Radio Stack via the Active Sync-Connection bevor performing Programm A - Upgrade. Try to perform Program B - Update first, in our case we got our lovely orange light back and then performed the Programm A and Programm B - Update again!
Regards again!
Michael
Didn't work for me either.
The BIG question is how the hell did you get your XDA charging his battery again ? I believe that this will help many people to get their 1% Flash failed problem solved.
Hi !
I will try this method tomorrow.
Sebi
Hello,
I do not know why, but after (failed) installing Programm B after connecting via Active Sync first it worked . Maybe because of the working version-combination of Radio Stack and CE.
Regards
Miwu
@Sebi Please post if it is working!
Hi !
Don't work for me.
My problem is same this:
Posted: Fri Aug 29, 2003 19:26 Post subject:
--------------------------------------------------------------------------------
I have no problem starting an Active Sync Connection, my problem is, that i get this odd Error Message which tells me to plug in the Power Adapter, which is obviously connected...
Click to expand...
Click to collapse
Best regards
Sebi
miwu
I followed your steps and got the following message on my device:
The file "\Windows\RSUpgrade.exe" is in use or is in ROM. If the file is not in ROM, please close the application using the file.
Please advise
Anaq8i,
if this messege appears then rename the file "\Windows\RSUpgrade.exe" with an new name like "\Windows\RSUpgrade_used.exe" restart the device and follow the further instructions.
Hope that helps
Regards
Michael
miwu,
I cannot rename it, nor can I delete it, I think because it is in ROM. Please keep in mide that the I have not closed the error message after the 1% halt.
I reached the point were I can access my device and can sync with my PC. If I try the Programme A install, I get the message " WARNING 001: POWER ADAPTER NOT PLUGGED IN, Please plug the power adapter into your Pocket PC". Every time I try the RSU upgrade I get the 1 % error. Any suggestions will be appreciated
Hi anaq8i,
please try to rename the file by using the Active-Sync-Connection an the Explorer of your big Desktop-PC. The file cannot be in the rom, it is located in the ram of your device in order to get deleted after upgrading. Try to rename the file this way, then perform a soft-reset (not a hard one) then you will get an error-message that sonds like "the file ... cannot be fount", then put your device in the crade for active sync and try to install the original Programm B of your Provider (not the file from repair.zip). That worked at my XDA.
Please answer how it worked.
Regards this time from Hamburg/Germany
Michael
thanx a lot, have the same error, now all worx fine!
czeky thanks for answer. I am glad that my description was helpful Doe it work for other users?
@ czeky
would you also please be so kind and tell us if u tried any other steps than mentioned by miwu ?
If i treally worked with your XDA there you must have done something different then anaq8i, Sebi and i did...
miwu
I reached the point that I can boot my XDA and can sync with my PC. But I still cannot install /upgrade the RSU software, I still get the 1% error. If I try to install Porgramme A, I get the "POWER ADAPTER NOT PLUGGED IN" error message. I never reached the orange light stage on the XDA.
Anything else I should do?
@anaq81
Did you try to rename the described file via Active Sync? I posted it some day ago ...
Whenever I connect my MDA Vario to my PC (Dell 700m) I get the blue screen of death which says there is a driver issue. Dont know what to do at all. How to delete drivers? Which drivers to delete?
I'm sure someone must have had this problem, but a search turned up nothing.
Please help =)
If u r using kaspersky antivirus you'll have to get rid of it. It was my problem. When I started using another antivirus, problem has gone.
Greetings.
Thanks for the suggestion, I tried shutting down Kaspersky but I still got the error. I can try an uninstall.
Microsoft's Crash Analysis gives me the following:
Error report summary
Error type: Windows stop error (A message appears on a blue screen with error code information)
Solution available? : No (see Next steps)
What does this error mean?: Windows has encountered an error from which it cannot recover and needs to restart
Cause: Unknown device driver
Computer symptoms: A message appears on a blue screen with error code information (for example: e.g. 0x0000001E, KMODE_EXCEPTION_NOT_HANDLED)
You have to remove kaspersky. Or sync via IR.
Wellcome
Hi, I am using Kaspersky Anti-Virus and have no problems! 8)
So there might be another incompatibility.
Do you use Active Sync 4.1 ??? The older version 4.0 came with my device and didn't work.
this is my experience, I am using ActiveSync 4.1+WinXP Pro+NOD32+Sygate Personal Firewall...
once I connected my mini s to the pc, Sygate like other firewall software asked me for permittion regarding the usb connection...I permitted for sure....
but the initialisation took more 15mins, and the screen freezed....I tried several times and it happened every time...
then I connected my old PPC (with PPC2003)to the pc, nothing goes wrong....
finally, I EXIT the firewall, quit it...not just "allow all traffic"...then the connection works smoothly......
the problem is I need to quit the firewall before I start ActiveSync...
Im using activesync 4.1, so that should be no problem.
Got it to work!!! Killing Kaspersky did the trick.
Thank you
with older versions of kav, u have to switch off lan scan.
for example, with kav 5.0.225 wks, no pb.
I was thinking of switching to Panda anyway
Thanks for everyones Help, very appreciated!
I updated the ROM and the wizard seems to be working much faster, and no more error messages.
mikeusc said:
Got it to work!!! Killing Kaspersky did the trick.
Thank you
Click to expand...
Click to collapse
Anytime
It's the Kaspersky Anti-Hacker that causes the problem, the Anti-Virus and Spam applications are fine.
I was using Kaspersky Personal Pro and I got that Blue Screen. Unninstalled it and everything work fine now.
Hi guys,
great work! Much appreciated!
Only one problem here:
After upgrading my ba to wm6 under vista (yes, i read _and_ understood the wiki) it is not possible to connect via usb/cradle.
I downgraded and upgraded again - with no errors at all. Nothing. Same Prob. I checked the wmdc-settings. usb-con is checked. Several soft/hardreset and reboots so far. When I put the ba in the cradle the usb-sound sounds and thats all. Not even a mobile device in the devicemanager...
H E L P !
A PPC with no sync is not good!
THX
see if your BA is set up correctly
1. using file explorer, click on windows/async.lnk
2. choose menu/connections/
3. tick on synchronize all PC's using this connection, and choose "USB"
when i try to locate the async.lnk it has - as every file in this folder - a memory-chip-icon. Taping on it brings a error screen reading:
Code:
async.asy##
The file 'async' cannot be opened.
(Clicking on the 'Album'-Memory-chip-icon starts 'Album'... crazy!)
So I clicked on the Acrivesync-icon under programs and checked the connection-settings. Everything fine.
Any more Ideas...
Jipiee!
I just reinstalled WMDC - and viola!
Pfft! That one took hours to figure out!
So - Thanks a lot!
Just as the topic says. I saw a couple of people claiming to have used the seus to update and decided to try. I had the stock RA2 and wanted RA3.
When I connect the deivce, seus cannot recognize it. It makes several attempts (with the sound for new device found/unplugged) and then says that it could not recognize it. During this time the screen of the X1 flickers from the coloured stripes to a balck screen and there are multiple ActiveSync icons aperaing on the taskbar (all grey).
I have XP Pro SP3 03/09. Most of the topics I found were from people with Vista.
Any ideas? Now, I'm stuck with the stock RA1 until I find a solution.
I noticed something else. Just after the coloured stripes appear, there is a screen that pops up briefly and says "no image file!". After I plug the usb in, the bar with the 0% appears for a short moment, then the scrren goes black and returns to the coloured stripes. The cycle repeats all the time.
What is that "there is no image file!"???
orelsi said:
Just as the topic says. I saw a couple of people claiming to have used the seus to update and decided to try. I had the stock RA2 and wanted RA3.
When I connect the deivce, seus cannot recognize it. It makes several attempts (with the sound for new device found/unplugged) and then says that it could not recognize it. During this time the screen of the X1 flickers from the coloured stripes to a balck screen and there are multiple ActiveSync icons aperaing on the taskbar (all grey).
I have XP Pro SP3 03/09. Most of the topics I found were from people with Vista.
Any ideas? Now, I'm stuck with the stock RA1 until I find a solution.
Click to expand...
Click to collapse
Create a "real" administrator account, log on to that account, installation shall work fine...should work unless your R3A for your country hasn't been released.
Also, your current account is not admin even thought u mgiht think it is. It's usually the case.
i had the same problem, see this...
http://forum.xda-developers.com/showthread.php?t=514953
poetryrocksalot said:
Create a "real" administrator account, log on to that account, installation shall work fine...should work unless your R3A for your country hasn't been released.
Also, your current account is not admin even thought u mgiht think it is. It's usually the case.
Click to expand...
Click to collapse
I am the administrator.
Sapa13 said:
i had the same problem, see this...
http://forum.xda-developers.com/showthread.php?t=514953
Click to expand...
Click to collapse
Thank you for this, but I want to use SEUS for the update.
I had the same problem on my PC using Vista, however when I used my other PC that has XP it worked fine.
Obviuosly I don't know which you are working, but if you can give both a try...
orelsi said:
I am the administrator.
Thank you for this, but I want to use SEUS for the update.
Click to expand...
Click to collapse
http://www.computerperformance.co.uk/vista/vista_administrator_activate.htm
1. Logon to Vista using your normal username and password.
2. Click on the Start button
3. Click on Start Search.
4. Type, cmd.
5. Right-click cmd, select 'Run as administrator' from the shortcut menu.
6. In the black 'DOS box', type the following at the command line:
Net help user
7. The idea of the last command is just to observe the options for Net User. In particular, examine the syntax to set the password.
8. The next instruction is the crucial command. I have chosen password = p£ssworD, you may want to choose different characters.
9. Net user administrator p£ssw0rd
10. Net user administrator /active:yes
11. Check the message : The command completed successfully
12. Switch User, or logoff
13. Logon as Administrator Password p£ssw0rD (Your password may be different!)
Trap1: There should be no space between the word 'active' and the colon.
/active :yes is wrong.
/active:yes is correct.
Trap2: You need a forward slash before /active
Net user administrator active:yes is wrong
Net user administrator /active:yes is correct
Thanks to Rob Hilton for pointing out this trap.
Trapx: Pay close attention to the command, it should be active, not activate.
I thank Ben O'Sullivan for correcting this activate --> active error.
Well, I also thought that I was the administrator until I realised that I was not... I am not sure if this is the case for you but maybe check again?
EDIT: Nevermind, you got an XP, I think it's most likely that you got a lot of software that conflicts with activesync and it's probably impossible to find the culprit
I would just update it with some else's computer..
the "no image file" warning upon boot is because there is an SD card in the phone, but no image on the SD card that can be used to update the phone
orelsi said:
I am the administrator.
Thank you for this, but I want to use SEUS for the update.
Click to expand...
Click to collapse
Report your current ROM. It is possible that your phone is in USB to PC mode instead of ActiveSync mode. It is also possible that your ROM has not been officially released.
kirkie said:
I had the same problem on my PC using Vista, however when I used my other PC that has XP it worked fine.
Obviuosly I don't know which you are working, but if you can give both a try...
Click to expand...
Click to collapse
I said in the OP that I got XP Pro SP3
poetryrocksalot said:
I think it's most likely that you got a lot of software that conflicts with activesync and it's probably impossible to find the culprit
Click to expand...
Click to collapse
I formated the SD. Reinstalled the ActiveSync. Did a hard reset. No change.
ActiveSync is working fne when I connect the phone to the PC. It doesn't work when I try to update it via SEUS.
I t really is getting frustrating . Today I needed my GPS, but when I took the phone I had forgotten that I formatted the card earlier..........
ferjan said:
the "no image file" warning upon boot is because there is an SD card in the phone, but no image on the SD card that can be used to update the phone
Click to expand...
Click to collapse
I formatted the card FAT32. That should solve any issues. In order there to be an image for the update the SEUS should connect to the SD and copy that image in the first place.
poetryrocksalot said:
Report your current ROM. It is possible that your phone is in USB to PC mode instead of ActiveSync mode. It is also possible that your ROM has not been officially released.
Click to expand...
Click to collapse
The phone is in ActiveSync mode. As I said when the SEUS is trying to identify the phone there are multiple ActiveSync icons appearing on the taskbar. All of them are innactive (grey).
I use the official RA2. Updated through SEUS.
I know there is a stupid little issue that I am overlooking. It is something obvious every time. I can't find it this time though....
What I meant was that the ROM for you country/language has not been released. And I meant pc software that conflicts with active sync, if this is not the case then obviously R3A is not release.
poetryrocksalot said:
What I meant was that the ROM for you country/language has not been released. And I meant pc software that conflicts with active sync, if this is not the case then obviously R3A is not release.
Click to expand...
Click to collapse
That shouldn't conflict with SEUS recognizing my device though, right?
Here comes another day of experimenting to find the answer .
hello m8 i had once this problem when i a hardspl and then i wanted to update from seus.
what i did? i run the stockspl -> flashed a stock rom >then update froms seus.
it happened to me 2 times when i tried to flash custom roms or official roms via flash mode. the problem was solved both times
i dunno if that helps but u could try.
lunaticxgr said:
hello m8 i had once this problem when i a hardspl and then i wanted to update from seus.
what i did? i run the stockspl -> flashed a stock rom >then update froms seus.
it happened to me 2 times when i tried to flash custom roms or official roms via flash mode. the problem was solved both times
i dunno if that helps but u could try.
Click to expand...
Click to collapse
The thing is, I never flashed custom ROMs on this device. All the different ROMs I tried were flashed on another X1. The only thing I have done is hard reseting 10+ times and updating to RA2 via SEUS one time. That's it.
I guess it could work, but I will do it as a last resort. There is something wrong with my phone and I want to know what or at least how to fix it.
Like I said, your R3A has not been released. I will keep saying this until you tell me that you know 100% that the R3A for your Xperia has been released.
I too had the same issue. I also couldn't install the bootloader to load a custom ROM either. Skipping several hours of swearing, soft boots and repeatedly trying the same thing, I discovered the problem was with Kaspersky.
After disabling Kaspersky, I was able to load the Generic UK R3A off the SD card. Never got around to trying SEUS again, but have a go at disabling any internet security software you have.
I guess it's windows vista software issues (NOT POCKET PC SOFTWARE).
I have Windows XP on my laptop and whilst i could flash my x1 fine with the older SEUS client, since they upgraded to the new fancy looking client i face exactly the same problems. The x1 goes in USB mode and SEUS is starting/terminating several activesync processes in the background and then it fails.
Clear the Checkbox
I have Windows Vista Business running on my laptop.
I also have the problem of SEUS cannot indentify my X1 (but sometimes, it did recongize though very low succesful rate).
After clear the Checkbox : USB Connection allowed, in the Vista Mobile Devicecenter (before connecting the USB cable to X1), the SEUS can identify my X1 and I have tried it twice successfully.
Hop it can help.
minglee said:
I have Windows Vista Business running on my laptop.
I also have the problem of SEUS cannot indentify my X1 (but sometimes, it did recongize though very low succesful rate).
After clear the Checkbox : USB Connection allowed, in the Vista Mobile Devicecenter (before connecting the USB cable to X1), the SEUS can identify my X1 and I have tried it twice successfully.
Hop it can help.
Click to expand...
Click to collapse
Confirmed this trick. Just yesterday I was trying to update my X1 to R3A, but SEUS couldn't recognize my phone is connected. I've tried to activate built-in windows Administrator account, because it helped me when I was updating to R2A. But this time it didn't work. I was pretty confused, but after few minutes of searching on forum I found suggestion about uncheck that "USB Connection allowed" option. I did it, connected the phone and SEUS recognized it in a second. Tried 3 times and it worked like a charm.
I am running on Vista Home Premium 32bit.
Hello
I have a sony xperia e4 and have updated the phone. Since the update I cannot root it again. Does anyone knows the stock firmware build, so I can flash it to stock again please?
Thanks
Download xperia flashtool latest version, you can download firmware from "xperifirm" (include latest flashtool)
ulum.misbahul said:
Download xperia flashtool latest version, you can download firmware from "xperifirm" (include latest flashtool)
Click to expand...
Click to collapse
I downloaded the correct firmware from xpifirm but when trying to flash it it does not begin saying
07/036/2015 18:36:58 - INFO - Flashtool Version 0.9.18.6 built on 30-05-2015 22:30:00
07/036/2015 18:36:58 - INFO - Executing search strategies to find proxy selector
07/036/2015 18:36:58 - INFO - No proxy found for IE. Trying next one
07/036/2015 18:36:58 - INFO - No proxy found for firefox. Trying next one
07/036/2015 18:36:58 - INFO - No proxy found for java. Trying next one
07/036/2015 18:36:58 - INFO - Syncing devices from github
07/036/2015 18:36:58 - INFO - Scanning devices folder for changes.
07/037/2015 18:37:02 - INFO - Changes have been found. Doing a hard reset (removing user modifications).
07/037/2015 18:37:02 - INFO - Pulling changes from github.
07/037/2015 18:37:04 - INFO - Devices sync finished.
07/037/2015 18:37:09 - INFO - Selected Bundle for E2105. FW release : 24.0.A.3.8. Customization : Customized CE1
07/037/2015 18:37:09 - INFO - Preparing files for flashing
07/037/2015 18:37:09 - INFO - Device disconnected
07/038/2015 18:38:15 - INFO - Please connect your device into flashmode.
07/038/2015 18:38:22 - INFO - Device connected in flash mode
07/038/2015 18:38:22 - INFO - Opening device for R/W
07/038/2015 18:38:22 - INFO - Reading device information
07/038/2015 18:38:22 - INFO - Unable to read from phone after having opened it.
07/038/2015 18:38:22 - INFO - trying to continue anyway
Then it never continues. I can wait all day but nothing happens.
Also flashtool does not support my model. What a shame. there are all the xperia e models apart from e4.
May be not yet support, i do not see E21xx on device list,
Try go to androxyde flashtool thread: http://forum.xda-developers.com/showthread.php?t=920746
Or you can try flashing with sony pc companion, or with sony flashtool emma (unlocked devices)
Why, when I try to flash my xperia e4 e2105, it gives me error which says, : (Unable to read from phone after having opened it)?
Try re flash using sony pc companion,
I can't because I had unlocked the boot loader and pcc won't let me. I tried flash to system in fastboot mode and bricked it. It only boots up to sony and reboots. I can't see the reason why it is not letting me flash the files in flash mode. When I create a bundle there is my phone model number but it won't let me flash the ftt. It's like flashtool is not recognize my device. Also when you go to flashtool, devices, manage, cdfID Editor, my model is not listed.
How with emma flashtool?