Hi Guys,
I am facing a little issue in my S5 (indian exynos variant) whenever I put the device on charging and with just a little touch to device, it is showing this popup (attached below) i.e, whenever i place the device on charging and with very little movement to device in hands it shows the popup! I cant use device while charging because with every minute disturbance in hands error comes.... tried using device in safemode too but the problem is same.
Hoping for helpful replies..
Thanx in advance
Related
Hello All,
It has been a while since my last post, but I need help once again.
My Magician has taken a turn for the worse. The power connector has broken off and I had it repaired by a great company.
My issue is now the device is coming up with multiple colors on the display (primarily Orange, Light Blue, and White) vertically). This is different from the color test where it is Red, Blue, Green.
When I attempt to load the ROM all I get are connection issues on the MaUpgradeUt. I am not positive I have gotten the device into the correct mode as the display is not working. Speaking of displays, the company that attempted to repair my device did try a new screen and experienced the same results. Also they placed the original screen on a new Magician and the screen worked great.
Does anyone have any suggestions? I would love to have my Magician back.
Thank you,
John
John,
Try maupgradeut_noid.exe from the ftp, instead of maupgradeut.exe. It may help. I don't advice you to run down the battery cause some are complaining that it won't charge without OS. BTW does the led come up constantly when you plug in the power or usb? If so you probably still got an OS.
Guess you know how to put it into bootloader, just try & hold for a second or 10 & connect usb & try to flash with the no_id. Must be difficult without confirmations on your screen, but a SD flash will be even harder.
Hope this helps, otherwise I see only one solution left: have it serviced again :-(
Regards, M
Thank you for the info.
I tried the new MaUpgradeUt_noID but now I am getting the error on the PC saying Error 150: ROM Upgrade Utility Error.
The device appears to be fully functional with the exception of the screen.
John
Did you ran the noid once or twice. It needs to be running twice, my guess is that in the first run it alters the RUU file (adds the first line devicecheck or something) & the second it really upgrades.
Was the screen problem present before you had the power-connector serviced? Maybe something is loose or broken now...
Cheers, M
HI ! In the firsth place sorry for my bad english.
I have had a titan for about 6-7 months and a week ago it stopped working without a reason.
It stopped responding and after a reset it only shows the starting logo, and after that the screen slowly shifts to pure white colour and I can hear a one "beep" sound.
I tried to hard reset it and everything but without any luck. It charges the battery fine when connected to a USB port (orange light),
after turning it on i get the green ligh, main branded logo and some numbers (M05 S04 B06 D 3.60 and 2 lines of other numbers but they show only for like half a second and disappear so i cant write them down)
after that nothing, the logo screen goes all white, with some "notification" sound and thats all.
When connected to PC It gets detected as "something" and I cant use any flashing software because it says that it did not detect the device,
one time It got detected as some modem device. Is there any way to bring it back to life ? or is it bricked permanently ?
Please Help
And Thank You in Advance !!
Update: I managed to make a connection between my PDA and PC
it is detected as "Microsoft windows mobile adapter #2", and my PDA_PC is detected in My Computer,
but when I try to flash it the software detects it i get the message to wait 5 min till the flash is over but
as soon as this message appears my PDA is getting disconnected and i get an connection error...
help ;(
Ah... and one more thing, I dont know if it matters but when i open my PDAs memory the windows folder appears to be deleted...
can any one zip their windows folder and give me a link to it... maybe that will help ;(
I have the same problem on my Mogul with connecting to my Computer! For some odd reason it won't sync and restarts my computer automatically!! WEIRD!? Just go check out some of the Unbricking posts or Google it- they may help you!
Hi Bros & Pals!
I have an issue on my trusty Samsung Omnia Pro B7610 running on Windows Mobile. Recently it failed me badly and it was just trying to to read a sms and it hangs from there.
Therefore I tried Soft-Reset by pressing the reset button on the phone and it will reboot and stays at "Samsung Logo" screen.
Nothing can be pressed and seemed working even after re-insert the battery.
When I plugged the phone to a wall charging outlet, it will shows a big battery in the centre but doesn't show the "Blue" Bars moving or show signs of recharging. So if I plug it out, it will just stays at that "Battery" screen forever.
I tried searching for Hard-Reset Method but don't seem to work at all.
Pressed: (Reset) + (W&L + Lock + Start Call + End Call)
Tried to Re-flash the phone but the problem is that I can't even switched it on for "initial" Active Sync detection and this phone was never connected to my computer at all.
I hope any kind useful information that could bring my phone back to life would be great help
Thanks for spending time reading my thread.
Hmmm.... Waiting for some useful information...
Same problem, any solution?
I've exactly the same problem, any one has any idea how to overcome this problem?
i have flashed my schist rom 23034 with schist_21189 but the my phone is not working properly.the problems are as follows
1.phone starts very late.
2.if i keep it on the stand by mode and want to close the screen it wont do it.
3.with in 3 to 4 minutes of stand by mode the screen starts to wash out and turns white with nothing happening on it.no key will work in this stage.
4.the usb while starting gives the charging lite but when it starts the usb is not recognizable not by active sync.it wont work at any cost
please help me guys i am in BIG TROUBLE!!!!!!!!!!!!!!
So I recently got back into my s7 edge because my s8 plus screen broke and I had to order a new one. This is my issue:
I stopped using my s7 edge like 8 months ago because the battery got inflated and the cover came off. I bought a new battery today and replaced it myself. But when I conected my s7 to the charger it just shows a small blue message on the upper left corner "Recovery Booting" It flashes. I can get no commands to work. Ive tried them all. Hard reset, download mode, etc none work. I never did nothing risky on my device. I just used it for whatsapp, messenger, and youtube. My pc doesnt recognizes the phone and It wont power on. Not even to the samsung display logo. It doesnt even show the green battery charging animation (when the phone is off, and charging).
Really hope someone can help me. I really need to fix this ASAP cause of my work.
After some researching I think I might have a hard bricked s7 . I will buy a jig tomorrow. Hopefully that will help
You should think about changing the thread title.
Most people wont open a thread with "Please help" as the title...