[Q] Install 4.4.2 from another region - Galaxy S3 Neo Q&A, Help & Troubleshooting

Purchased a Note 3 Neo in Hong Kong last year.
Model Number: SM-N7505
Android Version: 4.3
Baseband Version: N7505ZHUAND2
Currently running:
http://www.sammobile.com/firmwares/download/29517/N7505ZHUAND2_N7505ZZHAND2_TGY/
KNOX is already flipped, so I don't care.
Browsing http://www.sammobile.com/firmwares/database/SM-N7505/, I see that there are some 4.4.2 for various regions, but I need to have a 4.4.2 base in order to install a custom ROM correct?
I get a "Device has been modified. Software updates are not available" message when clicking "Check for Updates" - so my assumption is I'm going to have to do this manually? But do I just need to wait?
Edit:
This may answer my question: http://forum.xda-developers.com/note-3-neo/general/to-flash-bulgaria-firmware-german-sm-t3035794
Thanks for the help!

jbcholdings said:
Purchased a Note 3 Neo in Hong Kong last year.
Model Number: SM-N7505
Android Version: 4.3
Baseband Version: N7505ZHUAND2
Currently running:
http://www.sammobile.com/firmwares/download/29517/N7505ZHUAND2_N7505ZZHAND2_TGY/
KNOX is already flipped, so I don't care.
Browsing http://www.sammobile.com/firmwares/database/SM-N7505/, I see that there are some 4.4.2 for various regions, but I need to have a 4.4.2 base in order to install a custom ROM correct?
I get a "Device has been modified. Software updates are not available" message when clicking "Check for Updates" - so my assumption is I'm going to have to do this manually? But do I just need to wait?
Edit:
This may answer my question: http://forum.xda-developers.com/note-3-neo/general/to-flash-bulgaria-firmware-german-sm-t3035794
Thanks for the help!
Click to expand...
Click to collapse
ahahah you are in incorrect section (you Note 3 neo | this : s3 neo )
but i can reply you correctly!...
no, you can't, your modem version have only JB 4.3 android, if you install other rom (4.4) heva other modem.. then you can use phone.. (it can bug your Call, sms (sim) as it can brick your note 3....) i'm really sorry for you

Related

[Q] Question About Stock firmware build number

Hi,
A couple of months ago i rooted my Samsung Galaxy Note 3 LTE and now i have decided i wanted to unroot.
I wanted to unroot so i could easily update my phone again through samsung update as it wont let me if phone is rooted.
I went into SuperSU and pressed Full Unroot and rebooted my phone. After reboot i had lost root as planned, but when i tryed updating through
the update on my phone it still said my device was rooted.
I decided i wanted to go back to original factory stock firmware through odin.
I am able to find my firmware but cant find the same build number.
i wanted to ask does the build number change when samsung bring out an update or will my build number always be the same?
Here my phone details
Samsung Galaxy Note 3 LTE
Im on EE
UK
Model number: SM-N5005
Android version: 4.3
Baseband version: N9005XXUDMJ7
Build number: JSS15J.N9005XXUDMJ
Im trying to search the internet for the Original Stock firmware but all im finding on websites (Including this website)
is this firmware
Region: EVR (everything everywhere) UK
PDA: N9005XXUDML3 (different to my Current)
Changelist: 2019540
Android: 4.3
Build date: 12/12/2013
i havent updated since october 2013 due to being rooted and i hope to go to kitkat soon.
Am i able to use this firmware with a different build number?
Thank you for any help.
proberly a silly question but i need to ask before i do something wrong that could have been prevented.
Phoenix2014 said:
Hi,
A couple of months ago i rooted my Samsung Galaxy Note 3 LTE and now i have decided i wanted to unroot.
I wanted to unroot so i could easily update my phone again through samsung update as it wont let me if phone is rooted.
I went into SuperSU and pressed Full Unroot and rebooted my phone. After reboot i had lost root as planned, but when i tryed updating through
the update on my phone it still said my device was rooted.
I decided i wanted to go back to original factory stock firmware through odin.
I am able to find my firmware but cant find the same build number.
i wanted to ask does the build number change when samsung bring out an update or will my build number always be the same?
Here my phone details
Samsung Galaxy Note 3 LTE
Im on EE
UK
Model number: SM-N5005
Android version: 4.3
Baseband version: N9005XXUDMJ7
Build number: JSS15J.N9005XXUDMJ
Im trying to search the internet for the Original Stock firmware but all im finding on websites (Including this website)
is this firmware
Region: EVR (everything everywhere) UK
PDA: N9005XXUDML3 (different to my Current)
Changelist: 2019540
Android: 4.3
Build date: 12/12/2013
i havent updated since october 2013 due to being rooted and i hope to go to kitkat soon.
Am i able to use this firmware with a different build number?
Thank you for any help.
proberly a silly question but i need to ask before i do something wrong that could have been prevented.
Click to expand...
Click to collapse
go to www.sammobile.com download firmware you need flash with odin factory reset should be good to go
MJ7 --> M= 2013 J= October
ML3 --> M=2013 L= December
M= 13ª letter
J= 10ª letter
L= 12ª letter
You can upgrade from MJ7 to ML3 like I made from MJ7 to ML2.
Downgrade from MJ7 for one before not.
Phoenix2014 said:
Hi,
A couple of months ago i rooted my Samsung Galaxy Note 3 LTE and now i have decided i wanted to unroot.
I wanted to unroot so i could easily update my phone again through samsung update as it wont let me if phone is rooted.
I went into SuperSU and pressed Full Unroot and rebooted my phone. After reboot i had lost root as planned, but when i tryed updating through
the update on my phone it still said my device was rooted.
I decided i wanted to go back to original factory stock firmware through odin.
I am able to find my firmware but cant find the same build number.
i wanted to ask does the build number change when samsung bring out an update or will my build number always be the same?
Here my phone details
Samsung Galaxy Note 3 LTE
Im on EE
UK
Model number: SM-N5005
Android version: 4.3
Baseband version: N9005XXUDMJ7
Build number: JSS15J.N9005XXUDMJ
Im trying to search the internet for the Original Stock firmware but all im finding on websites (Including this website)
is this firmware
Region: EVR (everything everywhere) UK
PDA: N9005XXUDML3 (different to my Current)
Changelist: 2019540
Android: 4.3
Build date: 12/12/2013
i havent updated since october 2013 due to being rooted and i hope to go to kitkat soon.
Am i able to use this firmware with a different build number?
Thank you for any help.
proberly a silly question but i need to ask before i do something wrong that could have been prevented.
Click to expand...
Click to collapse
The build number is the firmware that come with. It will not harm your devices as long as the firmware is updated version. If your are updating to KitKat, you will not be able to downgrade to 4.3. Save your EFS file.
Thank you. I managed to find my MJ7 build and used odin and it worked.
but thank you for your comments i have a better undestanding for the future
You can go MJ7 > MK2 and return to MJ7 again also.

Baseband quick question

Hi
I just have a quick question regarding installing a 4.4.2 update with a different baseband to what is currently on my sm-n9005 as i am a impatient creature. Will it be possible and will i run into any issues doing this (e.g. modem differences etc) i also plan to install Sweet Rom once i can update the boot loader from 4.4.2
Current device
Baseband- N9005XXUDMJ7 (Saudi region i believe)
Build number- JSS15J.N9005XXUDMJ7
Update details
N9005XXUENB3_N9005OXXENB1_XEO (POLAND)
I have tried to find a answer via the almighty google but couldn't find a similar situation, any help greatly appreciated!!!!!
pavlo89 said:
Hi
I just have a quick question regarding installing a 4.4.2 update with a different baseband to what is currently on my sm-n9005 as i am a impatient creature. Will it be possible and will i run into any issues doing this (e.g. modem differences etc) i also plan to install Sweet Rom once i can update the boot loader from 4.4.2
Current device
Baseband- N9005XXUDMJ7 (Saudi region i believe)
Build number- JSS15J.N9005XXUDMJ7
Update details
N9005XXUENB3_N9005OXXENB1_XEO (POLAND)
I have tried to find a answer via the almighty google but couldn't find a similar situation, any help greatly appreciated!!!!!
Click to expand...
Click to collapse
Shouldn't be any issues flashing KK via Odin. -- So long as your note is not a Hong Kong variant. (which yours appears to not be)
radicalisto said:
Shouldn't be any issues flashing KK via Odin. -- So long as your note is not a Hong Kong variant. (which yours appears to not be)
Click to expand...
Click to collapse
Thank you for clarifying

...

...
randomid4 said:
Hey guys..
So I was trying to install a Korean Note 3 4.2.2 firmware (SM-N900S) on my Australian Note 3 (SM-N9005) using ODIN but was a failure.. It wouldn't proceed, saying "failed" so I gave up and instead of that I've installed UK Note 3 4.2.2 (SM-N9005)..
But I still want to install Korean firmware on my phone!!
So does anyone have any idea why this was a failure??
Is it because the model name is different?? (Will changing the model name by rooting help?)
From my past experience, I was able to install international firmware even without changing the model name..
About my device:
AP: N9005XXUEND3
CP: N9005XXUENC2
CSC: N9005OXAEND1
If you need any information about my phone (version etc.) Please ask!!
So I'm currently on UK BTU 4.2.2 (SM-N9005) and trying to install Korean SKT 4.2.2 (SM-N900S).
*This isn't a custom rom!!
Please help..
Thanks!!
Click to expand...
Click to collapse
The boot sequence in modern phones is secure/restricted (and Odin also tries to enforce it even before the boot - to stop you from writing bad stuff).
Basically the bootloader is different (something that you can also see even on the same N9005 model when going from 4.3 to 4.4 - 4.4 does not work with old 4.3 bootloader and currently there is a restriction which stops you from downgrading the bootloader).
...
randomid4 said:
But I'm not trying to downgrade.. Will it still not work..?
Also then, is there any other way to break this restriction?
Click to expand...
Click to collapse
No, you can't flash Korean rom on your N89005...

[Q] Issues updating firmware to 4.4.2

So I have checked far and wide across the net as to what I am suppose to do. First of all here is my device info:
Bootloader version: I337UCUEMK2
Baseband version: I337UCUEMK2
PDA version: I9500XXUEMJ9
CSC version: I9500XXUEMJ9
Product code: Not Active
Phone Model: GT-I9500
Build number: ORG.I9500XXUEMJ9
Modem Board: MDM8215M
Android Version: 4.3
I would like to update to KitKat 4.4.2 as I checked sammobile and there is a 4.4.2 firmware for my country despite not purchasing the device in my country (Jamaica). The dilemma I face though is that I'm not sure if it is a GT-I9500 firmware should be installed or a SGH-I337 firmware as you can see the bootloader is that of a I337 and the PDA version is I9500. Also would it affect me if I flash a different firmware from the one I have. I've tried updating through Kies but there is no update and I also tried OTA which proved unsuccessful as well as there were no updates. What should I do?
What is written in download mode? That's your phone model.
jojosilvera said:
So I have checked far and wide across the net as to what I am suppose to do. First of all here is my device info:
Bootloader version: I337UCUEMK2
Baseband version: I337UCUEMK2
PDA version: I9500XXUEMJ9
CSC version: I9500XXUEMJ9
Product code: Not Active
Phone Model: GT-I9500
Build number: ORG.I9500XXUEMJ9
Modem Board: MDM8215M
Android Version: 4.3
I would like to update to KitKat 4.4.2 as I checked sammobile and there is a 4.4.2 firmware for my country despite not purchasing the device in my country (Jamaica). The dilemma I face though is that I'm not sure if it is a GT-I9500 firmware should be installed or a SGH-I337 firmware as you can see the bootloader is that of a I337 and the PDA version is I9500. Also would it affect me if I flash a different firmware from the one I have. I've tried updating through Kies but there is no update and I also tried OTA which proved unsuccessful as well as there were no updates. What should I do?
Click to expand...
Click to collapse
It seems like you can install i9500 roms and firmwares, because in your bootloader it shows that your phone is this
Lennyz1988 said:
What is written in download mode? That's your phone model.
Click to expand...
Click to collapse
So I booted into download mode or odin mode and it says this:
Product name: SGH-I337
Current Binary: Samsung official
System status: Official
Knox Kernel: 0x0
Knox Warranty Void: 0x0
CSB-Config-LSB: 0x30
Write protection: Enable
eMMC Burst Mode enabled
How can the phone be an I9500 and then in odin mode say it is a SGH-I337. Also of note when I tried updating via OTA it was the AT&T update checker came up and said there was no update. Was it that the phone was flashed with an AT&T rom?
Any updates for this? I suffer from the same problem. Thanks!
comexx said:
Any updates for this? I suffer from the same problem. Thanks!
Click to expand...
Click to collapse
It's not really a problem. My guess is that you are running a custom rom where someone just edited the device info to a i9500. Or you are running stock but someone just changed the model name. No big deal. I can also name my phone anything that I want.
I bought my phone on ebay, which comes with AT&T rom. However, baseband and pda version is the same as jojosilvera. When I check online it seems that device is from Israel where KitKat update hasn't been released there (wtf). So I don't know what to do.
comexx said:
I bought my phone on ebay, which comes with AT&T rom. However, baseband and pda version is the same as jojosilvera. When I check online it seems that device is from Israel where KitKat update hasn't been released there (wtf). So I don't know what to do.
Click to expand...
Click to collapse
If you boot in download mode and it says you have a I337, then that is your model. Use roms for that model.
Lennyz1988 said:
If you boot in download mode and it says you have a I337, then that is your model. Use roms for that model.
Click to expand...
Click to collapse
It does say SGH-I337. But since it's different in baseband I can't update the phone neither using Kios or on-fly AT&T updater. Any ideas?
Thanks!
comexx said:
It does say SGH-I337. But since it's different in baseband I can't update the phone neither using Kios or on-fly AT&T updater. Any ideas?
Thanks!
Click to expand...
Click to collapse
Flash with Odin.
That was something I wanted to avoid. The seller offered me a return. Why would untouched firmware would be like this? Should I return it when I have the chance or just root & flash with another ROM? Thanks btw

Update

Hello i have a Samsung galaxy note 3 on three network , i am new to all this and i have googled my question many times only to become more confused. I was curious when my phone will get the lollipop update for uk phone. Future thanks to anyone who can give me any information. P.s im not rooted
zaravacher said:
Hello i have a Samsung galaxy note 3 on three network , i am new to all this and i have googled my question many times only to become more confused. I was curious when my phone will get the lollipop update for uk phone. Future thanks to anyone who can give me any information. P.s im not rooted
Click to expand...
Click to collapse
Hi,
What model of phone do you have? The LTE SM-N9005? If so (and I hope someone could either second this or correct me if i'm wrong) I believe you could flash via odin (and you do not need to be rooted to do this) the lollipop update that O2 has. 5.0 is available for the UK via the sammobile website, so if the basebands remain the same and the phone is the same model, I believe you could just download the 5.0 update from sammobile and flash it via odin.
Since you would be flashing an official version of sammy's rom, you won't need to be rooted, nor have a custom recovery.
Cheers
zaravacher said:
Hello i have a Samsung galaxy note 3 on three network , i am new to all this and i have googled my question many times only to become more confused. I was curious when my phone will get the lollipop update for uk phone. Future thanks to anyone who can give me any information. P.s im not rooted
Click to expand...
Click to collapse
We need know your model and firmware that you are using. Install this APP and add some screenshots here.
reply
Ok phone model is SM-N9005 And firmware is N9005xxugng1
zaravacher said:
Ok phone model is SM-N9005 And firmware is N9005xxugng1
Click to expand...
Click to collapse
so, you are using the sm-n9005, and the firmware u have is the same one as the firmware that the 02 UK version runs in 4.4.2.
Unless I'm mistaken, and if anyone sees I am please correct me, you could flash the 5.0 version with odin for o2 UK. I don't see why it wouldn't work, since it seems you have the same phone and firmware currently in 4.4.2
cheers
zaravacher said:
Ok phone model is SM-N9005 And firmware is N9005xxugng1
Click to expand...
Click to collapse
Your device is using of UK (with CSC: BTU). It still without Lollipop update. I recommend don't flash via ODIN any firmware and wait for future updates (via OTA) if you aren't rooted.
zaravacher said:
Ok phone model is SM-N9005 And firmware is N9005xxugng1
Click to expand...
Click to collapse
You have
Model SM-N9005 Model name GALAXY Note 3 LTE Country United Kingdom Version Android 4.4.2 Changelist 1955971 Build date Mon, 28 Jul 2014 12:56:29 +0000 Product code BTU PDA N9005XXUGNG1 CSC N9005OXAGNJ3
BTU no current update and likely to skip to the next build of Android .
O2 UK firmware can be used on this phone flashed via Odin .
http://www.sammobile.com/firmwares/download/45137/N9005XXUGBOB6_N9005O2UGBOC1_O2U/

Categories

Resources