Related
I create an FTF file via Flashtool.
D5803_23.4.A.1.200_Customized US 1289-7524
FTF stock rom: http://www.fshare.vn/file/6NG4Y6NKJS2N
Preroot+Recovery: http://www.fshare.vn/file/KT61EOYJHK4J
Thanks man, but can you use another website? Its all in Vietnamese, not sure which link to use....
You can easily change the language to english from Right Upper Corner..
Which recovery did you use?
it should be TWRP i think..
Can u confirm, that the wifi is not broken?
I downloaded the files myself from sony update and flashed it, no issues with wifi here.
Nummer35 said:
Which recovery did you use?
Click to expand...
Click to collapse
dual recovery Ver 2.8.21
Noob question. I have rooted, and have recovery installed per the How-to. Guide, but now I want to upgrade to the latest Firmware.
Are these the proper steps to follow? I am confused because people always reference back to the How-to Guide, but that was from a non-rooted phone without recovery, so what should I do now with rooted and recovery installed?
I have downloaded the preroot+recovery.zip file... Are the following steps correct?
1. Put the .zip file in the internal memory
2. Boot into recovery
3. Flash the .zip firmware
Is that it?
guys the link wont download. can someone mirror it for me or link me to another flashable zip?
Sent from my D5803 using Tapatalk
@ah_hin should work....but wipe only cache and dalvik...
another way a bit more time consuming is to back-up the apps using Titanium and then do a full wipe (always better than a dirty flash) flash the new build and then restore apps. i did it that way and have no issues...
@ zike .... use the flashtool to download the latest tft then use the guide on how to create your own prerooted flashable, is faster than to look for a mirror that is available and fast.
Hi i have a big problem i wanted to root my xperia z3 compact so i unlocked the boot loader & i installed CWM Recovery v 6.0.4.7 the problem is when the phone start a pink light show up i can access to recovery mode when i press vol up but when i let it, it will be orange & reboot & the pink light show up again so i wiped data/factory reset but nothing happening & a message appear : E:unknown volume for path [/sd-ext] what's the solution plz
zike47222 said:
guys the link wont download. can someone mirror it for me or link me to another flashable zip?
Sent from my D5803 using Tapatalk
Click to expand...
Click to collapse
I second this. Though it works, it's very slow.
XT1022 Stock 5.1 version 23.26.8 Backup !
Download : https://drive.google.com/file/d/0B05Crz57q4zgMHJBZ1BHUlVrMWc/view?usp=sharing
Copy the file to TWRP directory!
Reboot to recovery!
Restore!
Latest ota
Latest one ?
Not able to download ... Ur link is in sharing view make it downloadable .
shankarsj said:
Latest one ?
Not able to download ... Ur link is in sharing view make it downloadable .
Click to expand...
Click to collapse
Yup, it is the latest one.
Check the link, it is working !
Bro make it zip and upload again plz can't able to download one by one plzzzzz
Shaikh Arbaaz said:
Bro make it zip and upload again plz can't able to download one by one plzzzzz
Click to expand...
Click to collapse
Done !
Thanks
I'm gonna try it
prince.d.emperor said:
XT1022 Stock 5.1 version 23.26.8 Backup !
Download : https://drive.google.com/file/d/0B05Crz57q4zgMHJBZ1BHUlVrMWc/view?usp=sharing
Copy the file to TWRP directory!
Reboot to recovery!
Restore!
Click to expand...
Click to collapse
what is the version of twrp u used then?? i've tried your your backup but it is failed,stuck in bootloop
Hey I restored twrp backup of yours but whenever I check for updates ,a screen show up of update available size 12 mb. Can u tell why this occurs if the backup is latest.
hitesh21 said:
Hey I restored twrp backup of yours but whenever I check for updates ,a screen show up of update available size 12 mb. Can u tell why this occurs if the backup is latest.
Click to expand...
Click to collapse
it is the latest update next to 23.26.8.en.03 which is 23.201.3.en.03.
hitesh can you tell me the version of twrp u r using?and the steps u followed during restoration?
asking coz i'm having some trouble with this twrp backup
I used twrp 2.8.7
I was on stock ROM 5.1 , what I did is wiped data system cache. But first I had placed the backup inside twrp folder on external SD card. Than normal restore. But the whole process from Motorola bootanimation to preparing your device took about 20 minutes. That was normal as when I first unlocked my boot loader same thing occurred as I was on lollipop latest ota. And still if any problem occurs u can try format data option inside wipe tab in twrp ,but remember it would wipe your internal storage.
**************
*******************************************************************
Can we flash it like some other rom or we have to do something special for this??
PLEASE HELP!
This is fully a noob helping guide , Am just trying myself to help noobs instead of explaining them each time .
Method 1 :
Make a twrp backup soon after unlocking boot loader .
Am not going to explain how to unlock bootloader and also twrp flashing ,you can search different threads available in the same section .
Soon after unlocking bootloader , Just boot twrp before flashing it .
This can be done this way , Once you unlocked bootloader .
Upon firstboot ,just goto developer options and enable USB debugging and then Open the folder where you had setup minimal fastboot (Mfastboot v2 google for it) . You should have it as you can't unlock bootloader without minimal fastboot .
In any empty space in minimal fastboot exrracted folder , just press shift+right click and select "Open command prompt here" .
Now copy twrp recovery to Mfastboot folder .
Connect your phone to PC.
In command prompt type the below command
adb reboot bootloader
Hit enter ,
Now your phone reboots to bootloader .
Now type this command .
mfastboot.exe boot twrp.img
(Just rename the recovery to twrp.img before flashing )
Now just take a backup and keep it safe somewhere to access when required .
This is easy , but many may loose their twrp backup for some reasons or forgot to take a backup before stepping to custom ROMs , move to Method 2 if your in such group .
Method 2:
Download update.app from official site .
Extract and put dload folder in root of sdcard .
Power off the phone and press vol up+ vol down and power .
It will now fully flash stock ROM with all stock files .
(This method requires stock recovery so keep in mind to flash stock recovery before trying to update as twrp can't perform these tasks )
Method 3:
Its not hard and not easy too but you required to download some tools .
Huawei update extractor tool (google for it)
Once downloaded open the tool and choose the path where you placed update.app in your PC .
Now the tool opens update.app .
Extract system.IMG and boot.IMG from update.app
Put them in the minimal fastboot folder.
Boot your phn to fastboot using command adb reboot bootloader .
Now connecting your phone to PC in bootloader mode , type the below commands
mfastboot.exe flash system system.img
mfastboot.exe flash boot boot.img
mfastboot.exe reboot
That's it you are on stock ROM.
Method 4:
Flash the stock rom flashable zip posted by devs in your device specific threads and flash it .
Fully for noobs : METHOD 5:
Download the twrp backup posted in device specific threads and put it in sdcard and restore it. Its easy though .
Now your device is ready for flashing official updates "if you get them"[emoji14].
i try every method here and i found myself anytime with modaco custom rom in name build its normal ? ( sorry for my bad english )
yddek971 said:
i try every method here and i found myself anytime with modaco custom rom in name build its normal ? ( sorry for my bad english )
Click to expand...
Click to collapse
Cache & Cust partitions need wiping and reflashing. Had the same issue when I reverted a Modaco rom back to stock.
Easiest method for L21 users is to flash this stock ROM: http://www.modaco.com/forums/topic/377002-r3-custom-rom-starter-template-honor-5x-kiw-l21-b130/ then replace TWRP with the stock recovery image from http://forum.xda-developers.com/honor-5x/development/repository-honor-5x-file-depot-t3328288
yes, the rom says "custom rom starter template" but it's the stock B130 UK ROM repackaged into a flashable ZIP. Much easier than messing around extracting system images.
---------- Post added at 02:22 PM ---------- Previous post was at 02:21 PM ----------
I should mention one thing. If you have gone back to stock after a custom ROM then you may find the internal storage partition is the wrong size. Just do a full factory reset from Settings to resolve this.
flibblesan said:
Cache & Cust partitions need wiping and reflashing. Had the same issue when I reverted a Modaco rom back to stock.
Easiest method for L21 users is to flash this stock ROM: http://www.modaco.com/forums/topic/377002-r3-custom-rom-starter-template-honor-5x-kiw-l21-b130/ then replace TWRP with the stock recovery image from http://forum.xda-developers.com/honor-5x/development/repository-honor-5x-file-depot-t3328288
yes, the rom says "custom rom starter template" but it's the stock B130 UK ROM repackaged into a flashable ZIP. Much easier than messing around extracting system images.
---------- Post added at 02:22 PM ---------- Previous post was at 02:21 PM ----------
I should mention one thing. If you have gone back to stock after a custom ROM then you may find the internal storage partition is the wrong size. Just do a full factory reset from Settings to resolve this.
Click to expand...
Click to collapse
oh thanks i see the r3 updated to format partitions rather than delete so i dont need to wipping cust and cashe ?
---------- Post added at 03:28 PM ---------- Previous post was at 03:15 PM ----------
i just need to flash this rom ?
yddek971 said:
oh thanks i see the r3 updated to format partitions rather than delete so i dont need to wipping cust and cashe ?
---------- Post added at 03:28 PM ---------- Previous post was at 03:15 PM ----------
i just need to flash this rom ?
Click to expand...
Click to collapse
Yes, if you just flash that rom then you'll be fully restored to stock, but with TWRP still in place. If you flash the stock recovery.img after then this will put the phone completely at stock and you should be able to apply future updates as the rom is completely untouched.
flibblesan said:
Yes, if you just flash that rom then you'll be fully restored to stock, but with TWRP still in place. If you flash the stock recovery.img after then this will put the phone completely at stock and you should be able to apply future updates as the rom is completely untouched.
Click to expand...
Click to collapse
thanks a lot !
gopinaidu77 said:
This is fully a noob helping guide , Am just trying myself to help noobs instead of explaining them each time .
.
Click to expand...
Click to collapse
All the TWRP Backups in my Back to stock Guide include stock recovery
And also using the dload/update.app method does not delete your data but it will replace your custom recovery / boot.img and you can take OTA update afterwords
clsA said:
All the TWRP Backups in my Back to stock Guide include stock recovery
And also using the dload/update.app method does not delete your data but it will replace your custom recovery / boot.img and you can take OTA update afterwords
Click to expand...
Click to collapse
Yeah , thats what i mean device specifix threads .
And thanks for your repository , all the stuff in one place :cheers:
Hi Gopi,
Please help me getting back to stock on my L-22.
I am planning to go back to stock of L-24 available as (KIW-L24-B151-Stock (Boot.img - System - System/Priv-App Only)) posted by clsA.
1. Which method to follow????
2. Do I need to go back to stock Recovery???? If yes, then how??? where is stock recovery of L-22 posted?????
Please guide me I can cook it.
3. otherwise B140.debloated version -2. I tried to install through TWRP. NO success but a bootloop. is it ok this way???
Thanks in advance.
@subodhverma21 , L22 already got b150 update and i posted ota link .
Try downloading stock twrp backup posted by me and restore it along with stock recovery and then install ota .
Sent from my KIW-L22 using XDA-Developers mobile app
gopinaidu77 said:
@subodhverma21 , L22 already got b150 update and i posted ota link .
Try downloading stock twrp backup posted by me and restore it along with stock recovery and then install ota .
Sent from my KIW-L22 using XDA-Developers mobile app
Click to expand...
Click to collapse
Thanks man,
It worked. Now on stock with update 150 installed.
Sent from my KIW-L22 using XDA-Developers mobile app
When I try the dload folder method on the root of my SD card the process fails. Can someone please advise what to do? I am L21
Hello,
I have exactly the same problem on a KIW - L21 . Did you find a solution?
Sorry for my english, I'm french.
Thank you
faisalsiddiqui said:
When I try the dload folder method on the root of my SD card the process fails. Can someone please advise what to do? I am L21
Click to expand...
Click to collapse
newic2001 said:
Hello,
I have exactly the same problem on a KIW - L21 . Did you find a solution?
Sorry for my english, I'm french.
Thank you
Click to expand...
Click to collapse
it's a known issue the L21 update seems to be corrupt their are many posts about it
can you install a rom with TWRP ?
If yes this Rom will get you back to stock >> http://loadbalancing.modaco.com/download.php?file=customromtemplate-5x-plk21-b130-r3.zip
Hi I went from Cm13 to stock with emui 2.0 by restoring my twrp backup before I flashed my first huawei gr5 custom rom.
Now i am trying to restore back to stock rom to fully use OTA updates. Here's what I Did:
1. Restore twrp backup (emui 2.0 not rooted)
2. Flash system img and boot.img via adb using img file from update.app also by using update extractor.
Now i realized that im still in twrp. Do i need to flash recovery img first? Then can i do updates without problem? Or do i need to use the update.app via dload updating too?
good work bro, helps a lot of ppl @gopinaidu77
---------- Post added at 03:07 PM ---------- Previous post was at 03:05 PM ----------
s4h1k0 said:
Hi I went from Cm13 to stock with emui 2.0 by restoring my twrp backup before I flashed my first huawei gr5 custom rom.
Now i am trying to restore back to stock rom to fully use OTA updates. Here's what I Did:
1. Restore twrp backup (emui 2.0 not rooted)
2. Flash system img and boot.img via adb using img file from update.app also by using update extractor.
Now i realized that im still in twrp. Do i need to flash recovery img first? Then can i do updates without problem? Or do i need to use the update.app via dload updating too?
Click to expand...
Click to collapse
try restoring though twrp
clsA said:
it's a known issue the L21 update seems to be corrupt their are many posts about it
can you install a rom with TWRP ?
If yes this Rom will get you back to stock >> http://loadbalancing.modaco.com/download.php?file=customromtemplate-5x-plk21-b130-r3.zip
Click to expand...
Click to collapse
@gopinaidu77
Hello sir
Does method 3 will have to be done with unlocked bootloader or locked one?
Because nexuse devices need unlocking the bootloader before flashing factroy images
NAROUTO said:
@gopinaidu77
Hello sir
Does method 3 will have to be done with unlocked bootloader or locked one?
Because nexuse devices need unlocking the bootloader before flashing factroy images
Click to expand...
Click to collapse
Of course unlocked one.
gopinaidu77 said:
Of course unlocked one.
Click to expand...
Click to collapse
Bro
I want your help please?
I tried to flash stock rom. I first extracted update.app .then flashed stock recovery via fastboot and tried to flash stock rom from dload folder in my memory card but always fail to install/and stuck with 5% . Then tried fastboot to flash the rom but error cannot load system.img but boot.img and recovery.img flashed successful.
I am stuck now and don't know why flash system partitions from Adb fails and from stock recovery fail @clsA
Help
NAROUTO said:
Bro
I want your help please?
I tried to flash stock rom. I first extracted update.app .then flashed stock recovery via fastboot and tried to flash stock rom from dload folder in my memory card but always fail to install/and stuck with 5% . Then tried fastboot to flash the rom but error cannot load system.img but boot.img and recovery.img flashed successful.
I am stuck now and don't know why flash system partitions from Adb fails and from stock recovery fail @clsA
Help
Click to expand...
Click to collapse
Your update.app fail to flash at 5% right ?
Its easy .. Goto settings/storage and set sdcard as default .
And then try dload method .it will get flashed now
If you afraid to flash qpst rom, here a method which will update your baseband/bootloader without qpst tool.
1) flash vendor to factory ( if you already flashed factory to vendor )
2) flash zui 3.5.389 full ota which has firmware included ( not the deodexed one by hendibudi )
Link :https://drive.google.com/file/d/1knkZxUyLNZO7uS8u_CK7j4j5-UqqGs5l/view (don't reboot
3) flash hendibudi's twrp for zui and reboot to rom
( The step 2 will lock your bootloader/ update your firmware/ bootloader. So we need to unlock bootloader again. To avoid wiping of internal storage we use twrp recovery which will only wipe /data
4)unlock your bootloader by following this
https://forum.xda-developers.com/lenovo-zuk-z2/how-to/how-bootloader-zuk-z2-pro-t3415392
( You can use your old unlock image )
5) clean flash any nontreble rom( needed)
Reboot to rom.
6)Reboot to recovery, flash factory to vendor zip.
( Don't reboot )
7) install latest twrp from twrpbuilder.org for our device ( install--image -- select -- recovery-swipe to flash )
8) reboot to recovery
9) clean flash your fav 4.4. kernel ROMs.
Note:
I am not tested new twrp by twrpbuilder.org instead of hendibudi twrp at step 3.
If it doesn't encrypt internal storage, there is no need of step 5&7
I followed this and worked. Don't miss any steps
I've Lost my unclocked bootloader file. There is a way to extract It from my Zuk? Thanks?
Inviato dal mio Z2 Plus utilizzando Tapatalk
sandruman said:
I've Lost my unclocked bootloader file. There is a way to extract It from my Zuk? Thanks?
Inviato dal mio Z2 Plus utilizzando Tapatalk
Click to expand...
Click to collapse
You can request unlock .img again
The way I got it working was by
1. Flashing deodexed TWRP flashable ZUI 4.0.233 rom and then set it up along with magisk.
2. Flashed factory2vendor.zip
3. Flashed TWRP by z2_plus_treble-TWRP-3.2.2_kubersharma_v2.img available in his thread.
4. Clean Flashed AEX 5.8
5. After setup again in TWRP clean flashed a Beta version of AEX v6.0
6. Again after that clean flashed the Official version of AEX v6.0.
You can skip step 4 & 5. I followed those steps to avoid any Blue Screen issue recently reported by some users. I didn't face any Bootloader problem.
*Remember to use Kubersharma TWRP in step 3. I don't know why, but Treble TWRP compiled by Davide is not reading internal storage when flashed after ZUI deodexed.
*And I am not responsible for anything that happens during your adventures.
ShaktiSW said:
The way I got it working was by
1. Flashing deodexed TWRP flashable ZUI 4.0.233 rom and then set it up along with magisk.
2. Flashed factory2vendor.zip
3. Flashed TWRP by z2_plus_treble-TWRP-3.2.2_kubersharma_v2.img available in his thread.
4. Clean Flashed AEX 5.8
5. After setup again in TWRP clean flashed a Beta version of AEX v6.0
6. Again after that clean flashed the Official version of AEX v6.0.
You can skip step 4 & 5. I followed those steps to avoid any Blue Screen issue recently reported by some users. I didn't face any Bootloader problem.
*Remember to use Kubersharma TWRP in step 3. I don't know why, but Treble TWRP compiled by Davide is not reading internal storage when flashed after ZUI deodexed.
*And I am not responsible for anything that happens during your adventures.
Click to expand...
Click to collapse
Didn't you every flashed a 3.1+ zui via qpst before?
Because as far as i know the deodexed zui 4.0. 233 doesn't updates the bootloader
satyen_ said:
Didn't you every flashed a 3.1+ zui via qpst before?
Because as far as i know the deodexed zui 4.0. 233 doesn't updates the bootloader
Click to expand...
Click to collapse
I never needed to. And AEX 6.0 run pretty much smooth without blue screen issue. I just followed the above mentioned procedures.
Deleted.
senthamizhan said:
If you afraid to flash qpst rom, here a method which will update your baseband/bootloader without qpst tool.
1) flash vendor to factory ( if you already flashed factory to vendor )
2) flash zui 3.5.389 full ota which has firmware included ( not the deodexed one by hendibudi )
Link :https://drive.google.com/file/d/1knkZxUyLNZO7uS8u_CK7j4j5-UqqGs5l/view (don't reboot
3) flash hendibudi's twrp for zui and reboot to rom
( The step 2 will lock your bootloader/ update your firmware/ bootloader. So we need to unlock bootloader again. To avoid wiping of internal storage we use twrp recovery which will only wipe /data
4)unlock your bootloader by following this
https://forum.xda-developers.com/lenovo-zuk-z2/how-to/how-bootloader-zuk-z2-pro-t3415392
( You can use your old unlock image )
5) clean flash any nontreble rom( needed)
Reboot to rom.
6)Reboot to recovery, flash factory to vendor zip.
( Don't reboot )
7) install latest twrp from twrpbuilder.org for our device ( install--image -- select -- recovery-swipe to flash )
8) reboot to recovery
9) clean flash your fav 4.4. kernel ROMs.
Note:
I am not tested new twrp by twrpbuilder.org instead of hendibudi twrp at step 3.
If it doesn't encrypt internal storage, there is no need of step 5&7
I followed this and worked. Don't miss any steps
Click to expand...
Click to collapse
First of all, kudos for the great job! I'm anxious to test it.
But please forgive my stupidity.
Which hendibudi TWRP build you mean? I could only find a 3.2.1 but I'm not sure it can handle Treble.
renatohm said:
First of all, kudos for the great job! I'm anxious to test it.
But please forgive my stupidity.
Which hendibudi TWRP build you mean? I could only find a 3.2.1 but I'm not sure it can handle Treble.
Click to expand...
Click to collapse
Yes it doest support treble partition. But we need that twtp to avoid internal storage encryption problem.
So we can flash any non treble ROM, reboot yo ROM, reboot to recovery , flash factory to vendor zip, flash latest treble twrp, reboot to twrp then flash 4.4 ROMs.
My entire point is flashing vendor to factory and and full ota 3.5.389 zip will update bootloader, firmware ( it will work just as qfil flash )
My guide can be followed if someone having trouble with qfil . ( tested by at least 2 people )
Other steps are just to avoid encryption and internal storage wipe problems that may come after flash.
Hope it'll remove doubts
senthamizhan said:
Yes it doest support treble partition. But we need that twtp to avoid internal storage encryption problem.
So we can flash any non treble ROM, reboot yo ROM, reboot to recovery , flash factory to vendor zip, flash latest treble twrp, reboot to twrp then flash 4.4 ROMs.
My entire point is flashing vendor to factory and and full ota 3.5.389 zip will update bootloader, firmware ( it will work just as qfil flash )
My guide can be followed if someone having trouble with qfil . ( tested by at least 2 people )
Other steps are just to avoid encryption and internal storage wipe problems that may come after flash.
Hope it'll remove doubts
Click to expand...
Click to collapse
Thanks for your kindness!
Alright then, I'm next on line to test! I'll just backup (it sucks...) then I'll flash!
Out of luck, flashing via Mi Tool now...
renatohm said:
Out of luck, flashing via Mi Tool now...
Click to expand...
Click to collapse
What happened
senthamizhan said:
What happened
Click to expand...
Click to collapse
Blue screen. I'm stuck on Qfil too, it also resulted in blue screen. Starting from scratch.
renatohm said:
Blue screen. I'm stuck on Qfil too, it also resulted in blue screen. Starting from scratch.
Click to expand...
Click to collapse
There is baseband zip file of 3.5 zui (in guides and discussion section) you can flash that if you don't want to go through the long process of Qfil, I flash that zip and i am able to use 4.4 kernels
This will not lock your bootloader and can be flashed by official TWRP
satyen_ said:
There is baseband zip file of 3.5 zui (in guides and discussion section) you can flash that if you don't want to go through the long process of Qfil, I flash that zip and i am able to use 4.4 kernels
This will not lock your bootloader and can be flashed by official TWRP
Click to expand...
Click to collapse
Yes, that's the reason I tried this in the first place, but it didn't work for me.
Qfil did work, and I'm now on Bootleggers.
sandruman said:
I've Lost my unclocked bootloader file. There is a way to extract It from my Zuk? Thanks?
Inviato dal mio Z2 Plus utilizzando Tapatalk
Click to expand...
Click to collapse
Bro,if u had used your email address try checking in your inbox again for image, just search bootloader .
I've changed my mail with a Gmail one and it work. Now I've my unl files
Inviato dal mio Z2 Plus utilizzando Tapatalk
flash vendor to factory ( if you already flashed factory to vendor ) "
explain this line
In these forums there was a file for updating baseband to 1.70. I flashed it promptly and my phone also went into soft brick. Because accidentally my bootloader got locked and got revised also. By using certain key combinations I succeeded in again unlocking my bootloader without formatting my inner storage . now I am able to flash 4.4 ROMs. Without going through all the hassles of backup, formatting and again flashing twrp.
Your guide didn't work for me (but step 2 using your file didn't lock my bootloader). It would be nice if you gave direct link to items in your steps (for i.e factory to vendor.zip, twrp...). I guess I'll try using qfil unless someone has some tips... BTW I can't find a good qfil guide for 4.4 kernel roms, could anyone give me a link to a helpful thread for it if I can't get it working using this method?
I have a well working Note 7 with unlocked and rooted 10.3.5.0 Global PFGEUXM (TWRP recovery and magisk).
Today I got the OTA notification to update ROM to 10.3.6.0.
What I will lose if I update?
What's the best way to proceed?
Thank you
Nothing will be lost from a regular OTA Just check around for any bugs or problems that other people are having if any? And update if you like.
rockerduck said:
I have a well working Note 7 with unlocked and rooted 10.3.5.0 Global PFGEUXM (TWRP recovery and magisk).
Today I got the OTA notification to update ROM to 10.3.6.0.
What I will lose if I update?
What's the best way to proceed?
Thank you
Click to expand...
Click to collapse
You have to download the full rom then go to twrp and wipe cache and dalvik flash the rom and magisk without reboot to system. After the flash of magisk you can reboot to the system. If you don't flash magisk before rebooting MIUI overwrite the twrp with the stock recovery and you have to reinstall twrp with fastboot
---------- Post added at 02:14 PM ---------- Previous post was at 02:12 PM ----------
If you get a compatibility error when flashing the rom just delete from the rom zip the file compatibility.zip
darhma said:
You have to download the full rom then go to twrp and wipe cache and dalvik flash the rom and magisk without reboot to system. After the flash of magisk you can reboot to the system. If you don't flash magisk before rebooting MIUI overwrite the twrp with the stock recovery and you have to reinstall twrp with fastboot
---------- Post added at 02:14 PM ---------- Previous post was at 02:12 PM ----------
If you get a compatibility error when flashing the rom just delete from the rom zip the file compatibility.zip
Click to expand...
Click to collapse
Thank you very much darhma.
Should I reflash Disable_Dm-Verity before magisk?
rockerduck said:
Thank you very much darhma.
Should I reflash Disable_Dm-Verity before magisk?
Click to expand...
Click to collapse
You're welcome. I don't think it's needed the disable_dm-verity (but also i don't think that's a bad thing if you reflash it). If you want to thanks somebody in xda forum just press the thanks button (the ok button).
Hi!
I am new here so please don't be angry for my next questions
I just want root my Redmi Note 7 and keep OTP updates.
I read so many threads and this is my conclusion:
First I must apply for unlocking bootloader. Then flash TWRP recovery from here. After this flash Magisk through TWRP and that is it!
When phone notifies me that there is a new software update, I must download recovery rom from here, put it in internal memory, flash it and flash immediately Magisk again (flashing Magisk is mandatory after every software update to keep root).
Can anybody confirm that this is right way?
Thank You in advance.
wheelnut said:
Hi!
I am new here so please don't be angry for my next questions
I just want root my Redmi Note 7 and keep OTP updates.
I read so many threads and this is my conclusion:
First I must apply for unlocking bootloader. Then flash TWRP recovery from here. After this flash Magisk through TWRP and that is it!
When phone notifies me that there is a new software update, I must download recovery rom from here, put it in internal memory, flash it and flash immediately Magisk again (flashing Magisk is mandatory after every software update to keep root).
Can anybody confirm that this is right way?
Thank You in advance.
Click to expand...
Click to collapse
Yes that's the right way.
---------- Post added at 01:34 PM ---------- Previous post was at 01:26 PM ----------
Another thing: if you get a compatibility error when flashing the rom just delete from the rom zip the file compatibility.zip
darhma said:
Yes that's the right way.
---------- Post added at 01:34 PM ---------- Previous post was at 01:26 PM ----------
Another thing: if you get a compatibility error when flashing the rom just delete from the rom zip the file compatibility.zip
Click to expand...
Click to collapse
Can I do that in TWRP or I must unpack rom on computer and pack it as zip again?
wheelnut said:
Can I do that in TWRP or I must unpack rom on computer and pack it as zip again?
Click to expand...
Click to collapse
I think that you can do that from twrp but i'm not 100% sure. From computer you don't need to unpack and repack, just open the zip with 7zip or unrar (i'm on linux and don't know which program you use for zip files) and delete the file
darhma said:
I think that you can do that from twrp but i'm not 100% sure. From computer you don't need to unpack and repack, just open the zip with 7zip or unrar (i'm on linux and don't know which program you use for zip files) and delete the file
Click to expand...
Click to collapse
I'm using Windows and WinRAR. Will try after I download recovery rom (my dl speed is ****ty so it wont be soon)
I'm getting Error: 7 and am unable to update through TWRP on Redmi Note 7. Anyone else facing this?
thelastprime said:
I'm getting Error: 7 and am unable to update through TWRP on Redmi Note 7. Anyone else facing this?
Click to expand...
Click to collapse
Are you sure you downloaded the right rom? Error 7 is a mismatch of the firmware
Just come to say that everything went fine.
I didn't need to wait for unlock bootloader. I bought phone 2 weeks ago and using it normally and when I start unlock procedure it unlock without waiting time (I saw that someone must wait 720 hours!!).
I flash twrp and magisk (I had fingerprint lock so after flashing I did data erase) and now I have rooted phone
So, I have a my Redmi Note 7 keeps telling me that there is a new update which is V10.3.10.0.PFGMIXM
I didn't want to install it since I was happy with my phone. But now the notification is not going away and it is always there. So I tried to install it from OTA but since my phone is unlocked and has TWRP on it, the update can't be installed.
My questions are:
- Should I download the rom and flash it through TWRP?
- How should I flash it without being have to make a factory reset? Is it posible not to loose any data? And if so, is it bad to flash it just like that?
- There is a kernel which is called EVIRA that I want to flash, too. So the order should be:
Rom + Kernel + Minsk, is that correct?
Thanks in advance.
EDIT: There are 2 versions of the new rom:
Recovery Rom and Fastboor Rom.
https://c.mi.com/thread-2432115-1-0.html
What is the difference? Which one should I download?
kaplanfa said:
So, I have a my Redmi Note 7 keeps telling me that there is a new update which is V10.3.10.0.PFGMIXM
I didn't want to install it since I was happy with my phone. But now the notification is not going away and it is always there. So I tried to install it from OTA but since my phone is unlocked and has TWRP on it, the update can't be installed.
My questions are:
- Should I download the rom and flash it through TWRP?
- How should I flash it without being have to make a factory reset? Is it posible not to loose any data? And if so, is it bad to flash it just like that?
- There is a kernel which is called EVIRA that I want to flash, too. So the order should be:
Rom + Kernel + Minsk, is that correct?
Thanks in advance.
EDIT: There are 2 versions of the new rom:
Recovery Rom and Fastboor Rom.
https://c.mi.com/thread-2432115-1-0.html
What is the difference? Which one should I download?
Click to expand...
Click to collapse
1) download the full recovery rom
2) reboot to twrp
3) wipe dalvik art/cache and cache
4) flash the rom, the kernel and magisk in this order. Don't reboot to system until you have flashed magisk
5) reboot to system
6) enjoy
If you get a compatibility error when flashing the rom just delete the file compatibility.zip from the rom zip
Is updating ota with full recovery rom via twrp erase internal data or installed app?
darhma said:
1) download the full recovery rom
2) reboot to twrp
3) wipe dalvik art/cache and cache
4) flash the rom, the kernel and magisk in this order. Don't reboot to system until you have flashed magisk
5) reboot to system
6) enjoy
If you get a compatibility error when flashing the rom just delete the file compatibility.zip from the rom zip
Click to expand...
Click to collapse
Is installed app or data lost?
m.nav7854 said:
Is installed app or data lost?
Click to expand...
Click to collapse
If you do an update there should be no data loss however it is always recommended to have a backup of your data