Related
HEADS UP!
I am not responsible for a bad installation that will damage your device. So, follow the tutorial carefully and install successfully!
P.S¹: Need not be specifically with some firmware.
P.S²: This tutorial was translated with Google Translate!
SPECIFICATIONS
Official version Soak Test
Compatible with XT1068
Not Rooted
Size: 576MB
REQUIREMENTS
Bootloader Unlocked
Lollipop Backup 5.0.1 --> MEGA or Google Drive
TWRP v2.8.0.1 V2 --> Download
ADB+Fastboot.zip --> Download
BETA SuperSU v2.44.zip --> Download
CUSTOM RECOVERY INSTALLATION
Download the TWRP Recovery and ADB+Fastboot.zip
Unzip the ADB+Fastboot.zip
Place the TWRP file inside the unzipped folder ADB+Fastboot
Open a command window in the folder. To do this, hold the Shift key and click the right mouse button in a free field within the folder, select "Open command window here".
When the command window opens, type the seguinto command and press Enter:
Code:
fastboot flash recovery TWRP_2.8.0.1_Titan_v2.img
Ready, TWRP Recovery installed !
RESTORE LOLLIPOP 5.0.1
Download Backup Lollipop.
Extract the zipped file.
Go to the TWRP/BACKUPS/YOUR SERIAL NUMBER folder, and change the name of the folder for your device Serial Number, for this go to Settings - > About phone -> Status then look at your "Serial Number".
Then copy the TWRP folder and paste in the device memory.
Now, turn off the device.
Enter Bootloader mode, then go down with the volume button least until "Recovery" and confirm with the most volume button.
Within the TWRP Recovery, go to the "RESTORE", press on the "Lollipop 5.0.1" folder
Then confirm the restoration of the backup.
Wait until the restoration is complete.
ROOT - [UPDATED]
NOTE: THIS VERSION IS RUNNING SUPERSU 100% WITHOUT BOOTLOOPS.
Download the BETA SuperSU v2.44.zip
Put in the internal memory.
Install the SuperSU with TWRP Recovery.
When finished, wipe cache/dalvik.
Restart the device and wait a few seconds, then it will start normally without Bootloops.
STOCK RECOVERY LXB22.46-25 --> Download
AUTO INSTALLER OF THIS STOCK RECOVERY LXB22.46.25 --> Download
Thanks to Lucas Alves, for having made available this backup.
Thanks to Chainfire by execelente SuperSU!
Downloading to see if it can be...
Share some SS for the same, also specify the Firmware required to restore this? I.e. should be on 4.4.4 Braz Firmware or what? Pls put proper details to avoid any mistake from any user...
deeplyyoung said:
Share some SS for the same
sent From My XT1033{LP} using TapatalK
Click to expand...
Click to collapse
Seconded! Screenshots plzz... Specially the about page with Kernal Description and the Build date
Downloaded and installing.
Didn't wipe anything (I want to try upgrading). After the initial logo, the screen went black for about 2 mins and then started optimizing installed apps.
I' ll let you know as soon as I' ll be able to do some testing.
Thanks for sharing
PS. I own a XT-1068
gvala said:
Downloaded and installing.
Didn't wipe anything (I want to try upgrading). After the initial logo, the screen went black for about 2 mins and then started optimizing installed apps.
I' ll let you know as soon as I' ll be able to do some testing.
Thanks for sharing
PS. I own a XT-1068
Click to expand...
Click to collapse
Gr8, await for your reviews, but you should format system & clear cache for clean install, well now just tell us what you got, me to having XT1068 Dual Sim...:good:
Kernel version 3.4.42, Date Thu Dec 18 04:15:21 CST 2014
System version: 22.21.25.titan_retbr_dstv.retbr.en.BR reteu
Build number: LXB22.46-25
noemi.abril said:
Kernel version 3.4.42, Date Thu Dec 18 04:15:21 CST 2014
System version: 22.21.25.titan_retbr_dstv.retbr.en.BR reteu
Build number: LXB22.46-25
Click to expand...
Click to collapse
That we saw under SS, could you pls specify your Device Version & Dual Sim is Working or not??
deeplyyoung said:
Share some SS for the same, also specify the Firmware required to restore this? I.e. should be on 4.4.4 Braz Firmware or what? Pls put proper details to avoid any mistake from any user...
Edit: as per SS it's Braz Soak update for XT1069, @EduardoBoese update OP accordingly that one must be on Braz KK 4.4.4 XT1069 before restoring the same.
Click to expand...
Click to collapse
P.S¹: Need not be specifically with some firmware, just Wipe Dalvik Cache, Data, Cache and System, then you can restore.
Click to expand...
Click to collapse
Sorry, now explained
gvala said:
Downloaded and installing.
Didn't wipe anything (I want to try upgrading). After the initial logo, the screen went black for about 2 mins and then started optimizing installed apps.
I' ll let you know as soon as I' ll be able to do some testing.
Thanks for sharing
PS. I own a XT-1068
Click to expand...
Click to collapse
Wipe Dalvik Cache, Data, Cache and System, then you can restore
deeplyyoung said:
That we saw under SS, could you pls specify your Device Version & Dual Sim is Working or not??
Click to expand...
Click to collapse
Work OK on XT1068 reteu
noemi.abril said:
Kernel version 3.4.42, Date Thu Dec 18 04:15:21 CST 2014
System version: 22.21.25.titan_retbr_dstv.retbr.en.BR reteu
Build number: LXB22.46-25
Click to expand...
Click to collapse
just a quickie as still setting up XT1068 Dual sim UK
1)flashed with a full wipe and had to force a reboot as had been stuck in bootloop for 10mins +
2) it then booted with the upgrading android 1 to 50 screen , installed and booted to setup screen
3) 1st check was dialler and it works! (sort of!) you can dial AND you have dual sim selection , no FC's as had before,
but i dialled home phone, it rang and i hung up- great I thought - until i was checking phone settings and my home phone rang again, It was my xt1068 again BUT i wasnt showing any thing on phone to say I was dialling out. WTf?!!!
Maybe It a one off as not able to repeat this - but just a little warning - you could be connected to a number with NO indication.
4) plan to set up , root , remove brazil apps , edit build.prop to xt1068 friendly and make a new TWRP backup
@noemi.abril & @reefuge pls specify which version of TWRP you used to restored?? i.e. 2.8.0.1 or ______??
/sigh
How many times do OTA capturing how-to's have to be posted before people use them?
Installing someone else's installation backup is clearly Not a Clever Thing to Do®.
deeplyyoung said:
@noemi.abril & @reefuge pls specify which version of TWRP you used to restored?? i.e. 2.8.0.1 or ______??
Click to expand...
Click to collapse
TWRP 2.8.3.0
rufflove said:
/sigh
How many times do OTA capturing how-to's have to be posted before people use them?
Installing someone else's installation backup is clearly Not a Clever Thing to Do®.
Click to expand...
Click to collapse
yes it's clever thing to do cuz this is the only safest way to enjoy LP & we can easily revert to KK 4.4.4 anytime when official OTA release...:fingers-crossed:
deeplyyoung said:
@noemi.abril & @reefuge pls specify which version of TWRP you used to restored?? i.e. 2.8.0.1 or ______??
Click to expand...
Click to collapse
http://forum.xda-developers.com/moto-g-2014/development/recovery-images-install-recovery-images-t2987246
I used the No install TWRP
its 2.8.3.0. Fixed
Everything is OK
Everything works just fine
But upgrade path has problems with wifi.
Dual sim selector works fine, and data counters work fine.
what surprised me is that the old messages app, still exists and the new one Google Messenger is missing
Again, thanks for uploading
PS. It seems that it is a Brazilian rom. After factory reset, it starts with portuguese language and there is also a preintalled app "BR Apps" that says something for Brasil
gvala said:
Everything works just fine
But upgrade path has problems with wifi.
Dual sim selector works fine, and data counters work fine.
what surprised me is that the old messages app, still exists and the new one Google Messenger is missing
Again, thanks for uploading
PS. It seems that it is a Brazilian rom. After factory reset, it starts with portuguese language and there is also a preintalled app "BR Apps" that says something for Brasil
Click to expand...
Click to collapse
That's Rite, it's Braz Soak update for XT1069[emoji14]
Successfully upgraded...
Successfully Rooted too..
Request for new download links.
Sir I am from India. Here the mega.co.nz website is not opening i tried several different ways but due to large size of the file I was unable to download. Please provide us with googledrive download link.
I restore 5.1 TWRP 2.8.7 backup file from this thread. Now on 23.21.34
http://forum.xda-developers.com/moto-e/general/xt1022-indian-android-lollipop-5-1-stock-t3144999
I got update which is 23.26.1. But the file in the cache is 23.21.34 size 7.8 MB please check it. Not install with TWRP 2.8.7.
You need stock recovery for updating this
chaithanya0207 said:
I restore 5.1 TWRP 2.8.7 backup file from this thread. Now on 23.21.34
http://forum.xda-developers.com/moto-e/general/xt1022-indian-android-lollipop-5-1-stock-t3144999
I got update which is 23.26.1. But the file in the cache is 23.21.34 size 7.8 MB please check it. Not install with TWRP 2.8.7.
Click to expand...
Click to collapse
yeah even i got this...but m rooted... can any1 confirm the changelogs??
You need stock to recovery to update the phone.
You need stock recovery for updating the phone.If u want to use this update file which is in the cache folder on some other phone to install the 7MB update then u have to rename the file to Blur_version.23.26.1.condor_retaildsds.retaildsdsall.en.03.zip because the file name of the update file is always the older one.So u have to rename it.
I have a video on my YouTube channel on how to install lollipop 5.1 on Moto E 1st Gen officially. You can check out my channel by searching Tech4Joy on YouTube. Sorry I cannot add a link right now.
I'm on a custom Rom (Xoplaxos) and TWRP Recovery. I want to move back to Stock Rom 9, Kitkat or Lollypop. Can someone help me with step by step process in English.
Only link I got is http://www.amodindo.tk/2015/09/tutorial-downgrade-a6000plus-lollipop.html but this again isnt in English :angel:
77 views and not a single reply.... Wow
sonijd said:
77 views and not a single reply.... Wow
Click to expand...
Click to collapse
Its because there are a lot of solutions online. Try them.
If you still cant do it, PM me.
Iqbal Ansari said:
Its because there are a lot of solutions online. Try them.
If you still cant do it, PM me.
Click to expand...
Click to collapse
I'm slightly worried with Lenovo...last time I tried to upgrade rom from rooted stock Kitkat to stock lollypop, my phone got bricked.
I've never faced such silly issues with my earlier phones i.e. Samsung Galaxy 3 , Galaxy Nexus, Xolo etc.
I need a step by step process so that I can successfully go back to to stock and then take the phone to service center as there is some issue with Vibration
Step by Step
sonijd said:
77 views and not a single reply.... Wow
Click to expand...
Click to collapse
You post at the end of the year. People got their holliday
Ok, I'll try to help you.
Because you're using XOPLAX (LP), custom recovery (TWRP), and Lenovo A6000 Plus. Right?
I suggest you to flash stock LP.
The Steps:
Download stock LP ROM from HERE. (Latest S030). Save it to PC first.
Open your downloaded file (A6000-s_S030_151030_WCAF.zip) using extractor app, eg WinRAR, WinZIP, etc.
Extract file System.zip (The biggest file in A6000-s_S030_151030_WCAF.zip).
Open System.zip using extractor app.
Go To META-INF\com\google\android folder.
Replace update-script file with new update-script file (Link Below, Extract first). Save your System.zip
(Optional) Double check the update-script file. Make sure it has been replaced.
Save it (System.zip) to your external card.
Enter to custom recovery (TWRP).
Flash System.zip
FINISH
I hope this help your problem.
Mr. AW said:
You post at the end of the year. People got their holliday
Ok, I'll try to help you.
Because you're using XOPLAX (LP), custom recovery (TWRP), and Lenovo A6000 Plus. Right?
I suggest you to flash stock LP.
The Steps:
Download stock LP ROM from HERE. (Latest S030). Save it to PC first.
Open your downloaded file (A6000-s_S030_151030_WCAF.zip) using extractor app, eg WinRAR, WinZIP, etc.
Extract file System.zip (The biggest file in A6000-s_S030_151030_WCAF.zip).
Open System.zip using extractor app.
Go To META-INF\com\google\android folder.
Replace update-script file with new update-script file (Link Below, Extract first). Save your System.zip
(Optional) Double check the update-script file. Make sure it has been replaced.
Save it (System.zip) to your external card.
Enter to custom recovery (TWRP).
Flash System.zip
FINISH
I hope this help your problem.
Click to expand...
Click to collapse
Thanks a tonne Bro will try it today!!
sonijd said:
Thanks a tonne Bro will try it today!!
Click to expand...
Click to collapse
Guys I want to know that the stock kitkat version s017 ends with words WCAF. What does it stands for ?
I have downloaded same version which ends with WCEC.
Does it make any difference ? and the steps provided will be affected or what ?
I am using Lenovo A6000+ with lates 5.0.2 update given in around Dec 2015, but want to downgrade to 4.4.4.
sonijd said:
Thanks a tonne Bro will try it today!!
Click to expand...
Click to collapse
I tried following the steps you've mentioned bro..nut it gives an error and installation fails !
Error Message?
sonijd said:
I tried following the steps you've mentioned bro..nut it gives an error and installation fails !
Click to expand...
Click to collapse
What's error message?
Mr. AW said:
What's error message?
Click to expand...
Click to collapse
Skipping MD5 Check: no MD5 file found
Error flashing zip'/external_sd/system.zip'
updating partition details...
...Done
Failed
Thats the error message in all :/
sonijd said:
Skipping MD5 Check: no MD5 file found
Error flashing zip'/external_sd/system.zip'
updating partition details...
...Done
Failed
Thats the error message in all :/
Click to expand...
Click to collapse
Which recovery are you on.
You can also flash the system file with stock kk recovery.
Iqbal Ansari said:
Which recovery are you on.
You can also flash the system file with stock kk recovery.
Click to expand...
Click to collapse
I'm on TWRP and currently on Lollypop Mokee Rom
sonijd said:
I'm on TWRP and currently on Lollypop Mokee Rom
Click to expand...
Click to collapse
You want to downgrade to kk or want to flash stock lollipop.
Iqbal Ansari said:
You want to downgrade to kk or want to flash stock lollipop.
Click to expand...
Click to collapse
Either of them...I just want tp take the phone to the service center to be able to get it repaired as it has stopped vibrating...
sonijd said:
Either of them...I just want tp take the phone to the service center to be able to get it repaired as it has stopped vibrating...
Click to expand...
Click to collapse
Then flash a stock recovery of kk or LP.
Then flash stock rom of either kk or lp frm recovery by making a factory reset.
If I were in your situation i would do the following.
1. Flash stock LP recovery.
2. Go to recovery.
3. Make a factory reset.
4. Flash stock lollipop rom.
DONE.
I am not able to understand anything guys.
Iqbal Ansari said:
Then flash a stock recovery of kk or LP.
Then flash stock rom of either kk or lp frm recovery by making a factory reset.
If I were in your situation i would do the following.
1. Flash stock LP recovery.
2. Go to recovery.
3. Make a factory reset.
4. Flash stock lollipop rom.
DONE.
Click to expand...
Click to collapse
Please tell me..................i had twrp recovery with custom rom (XenonHD 5.1.1)
After your guidance i have flashed stock LP recovery .
But i want to install kit kat rom in my phone.
and want to install kitkat rom from lollipop recovery, can this is possible or i have to do anything extra
hotboyz01234 said:
Please tell me..................i had twrp recovery with custom rom (XenonHD 5.1.1)
After your guidance i have flashed stock LP recovery .
But i want to install kit kat rom in my phone.
and want to install kitkat rom from lollipop recovery, can this is possible or i have to do anything extra
Click to expand...
Click to collapse
you can flash kitkat rom but after that flash a twrp recovery for kitkat using adb otherwise you won't be able to boot into recovery
Hi... Iqbal ansari..... I need a Help
Iqbal Ansari said:
Then flash a stock recovery of kk or LP.
Then flash stock rom of either kk or lp frm recovery by making a factory reset.
If I were in your situation i would do the following.
1. Flash stock LP recovery.
2. Go to recovery.
3. Make a factory reset.
4. Flash stock lollipop rom.
DONE.
Click to expand...
Click to collapse
1st of all please read full......
I want to backup my stock firmware from my lenovo a6000plus. But the back up should BEFORE ROOTED...! is it complicated task ?. I had done a rom dumb backup of one of my mtk(media tek) device (intex aqua marvel) using mtk droid tool and converted it into a flashable file and flashed with the help of sp flash tool( faild at the first time but after finding a suitable version of this tool, the operation succeed.) On the behalf of this delightful experience for me, i am asking dear iqbal is it possible to take up a firmware or rom dump backup of qualcomm devices ( lenovo a6000plus is a Qualcomm device... Right?) BEFORE ROOTING.
Please don't say it is not possible or say the reason of why not.
I cannot find a solution for this On all over the internet.
If you can't would you please reach me into the right person.?
If you want any help about my question please ask me and i have some screen shot when i was connected the lenovo a6000 plus on mtk droid tool or you can do that.
Believes you can...
I found this rom on offical flymeos site
flyme.cn/ firmwarelist-56.html
Flyme 6.1
Yes I'm on ..
Its really good rom
Good battery life
so stable
2 bugs (File manager not working+lock screen password not working)
btw the rom updated yesterday but not yet on the official site the dev said lock screen is working now !
It my daily driver rom now ( Stabler than any aosp or los rom)
And I like that there is no over heat like aosp roms
And yes today I'm today on The new version
Perfect
Lock screen password works !
Hi,
Anyone care to share the download links, please? Looks really good!
Thanks in advance
binary_boy01 said:
Hi,
Anyone care to share the download links, please? Looks really good!
Thanks in advance
Click to expand...
Click to collapse
Yes Sure, here is the official site http://www.flyme.cn/firmwarelist-56.html
Flyme 6.7.5.19R beta http://openrom-dl.flyme.cn/16309793...36/flyme_GT-N7100_SiFooYee_6.7.5.19R-beta.zip
Note: there is a new version Flyme 6.7.6.5R beta but I receive it via the OTA updater!!!
Steps:
1- download it
2- boot into recovery
3- flash it
4- boot up system
5- complete the setup
6- back to recovery
7- flash MM Micro gapps from here http://opengapps.org/
8- boot up
9- sign in your google account
10- Enjoy =)
Firmware is suitable for daily use?
Any bugs?
Message application force closed how fix it?
daffefwegfsdf just greate.tried to install latest version did not work.just said error 7 or something like that.than I tried second time finished installing but it did not boot got stuck on boot screen of flyme OS bla bla...then I wiped everything and tried older previous version and now its stuck on "patching system unconditionally" what do i do?
JamesTSK said:
daffefwegfsdf just greate.tried to install latest version did not work.just said error 7 or something like that.than I tried second time finished installing but it did not boot got stuck on boot screen of flyme OS bla bla...then I wiped everything and tried older previous version and now its stuck on "patching system unconditionally" what do i do?
Click to expand...
Click to collapse
yea I got that error too. any ideas on how I could fix that? @alhaitha2020
Valkyrie146 said:
yea I got that error too. any ideas on how I could fix that? @alhaitha2020
Click to expand...
Click to collapse
You have to put the rom in internal storage after a full wipe by using file manager in twrp revovery after boot rom wait and wait the process take time
Test this and tell me if its ok
Sorry bad english
patching system image unconditionally
Valkyrie146 said:
yea I got that error too. any ideas on how I could fix that? @alhaitha2020
Click to expand...
Click to collapse
was not able to fix this problem.gave up and installed stock rom using odin.thas then only solution I could find!
zortadot said:
You have to put the rom in internal storage after a full wipe by using file manager in twrp revovery after boot rom wait and wait the process take time
Test this and tell me if its ok
Sorry bad english
Click to expand...
Click to collapse
thanks! this fixed it for me.
JamesTSK said:
was not able to fix this problem.gave up and installed stock rom using odin.thas then only solution I could find!
Click to expand...
Click to collapse
try @zortadot 's method it seems to work
tested flyme os 6
slymndkc said:
I found this rom on offical flymeos site
flyme.cn/ firmwarelist-56.html
Click to expand...
Click to collapse
This rom quit nice i already download most version from flyme 5 and flyme 6 and flashed succesfully . From my view for ur n7100 better use flyme os 5 that fit and all working in good order.:good:
here the link i download
http://webcache.googleusercontent.com/search?q=cache:http://www.flyme.cn/firmwarelist-56.html
What about chinese apps that are every where??. Are they now translated to english?
zortadot said:
You have to put the rom in internal storage after a full wipe by using file manager in twrp revovery after boot rom wait and wait the process take time
Test this and tell me if its ok
Sorry bad english
Click to expand...
Click to collapse
Which files i will delete in twrp file manager ?
DarkMountain said:
Which files i will delete in twrp file manager ?
Click to expand...
Click to collapse
No no no... no files are to be deleted..
He said that after you made a full wipe of your phone , open twrp file manager and place the rom zip into your internal storage
Gurkanwal Chauhan said:
No no no... no files are to be deleted..
He said that after you made a full wipe of your phone , open twrp file manager and place the rom zip into your internal storage
Click to expand...
Click to collapse
Thanks A lot of i succesffully flashed but i have another problem.
I come from linage os and i put to external_sd the flyme os ok.
i full wipe icluding internal storage ok
i put flyme os to internal storage by twrp file managar ok.
i flashed flyme now.
but when i press reboot button after succes flash twrp said NO OS installed do you want contiune.
i clicked yes but i stuck on samsung note 2 logo
i just google and a people said need flash from stock rom and unlocked bootlader is this true ?
I did, lost IMEI and Baseband
And to much lag
i tried it on n7105 it booted but ril not working at all. i tried to change ril file, edit build.prop but no lucky. someone can help me :x
Valkyrie146 said:
yea I got that error too. any ideas on how I could fix that? @alhaitha2020
Click to expand...
Click to collapse
Redownload the package
It happened to me too
And here is a fix for SMS messages app and File manager + Added Aosp keyboard
Enjoy =)
https://mega.nz/#!T5ZVwQJK!xl3J2f-Rwwg8Kh9RHHqSVPWz1JXQl4JQyQICzPlFgvY
---------- Post added at 12:13 AM ---------- Previous post was at 12:10 AM ----------
mahmoud.omar said:
I did, lost IMEI and Baseband
And to much lag
Click to expand...
Click to collapse
Old bootloader
This will restore your Indian variant Honor 7x back to stock, in case you have rooted or flashed TWRP before. After this you can get OTA updates and they will flash fine. If you want to manually flash OTA updates, you can continue to next video after watching this
I suggest you to watch it carefully and do same as I did to prevent any damages.
Downloads:
https://goo.gl/8TKYoT
Password for the zip is shared in telegram group:
MOD EDIT: LINK REMOVED
Also files access will be granted in the group for now, later they will be made public.
Text guide coming soon.
Watch on YouTube (not monetized)
Sudeep Duhoon said:
This will restore your Indian variant Honor 7x back to stock, in case you have rooted or flashed TWRP before. After this you can get OTA updates and they will flash fine. If you want to manually flash OTA updates, you can continue to next video after watching this
I suggest you to watch it carefully and do same as I did to prevent any damages.
Downloads:
https://goo.gl/8TKYoT
Password for the zip is shared in telegram group:
MOD EDIT: LINK REMOVED
Also files access will be granted in the group for now, later they will be made public.
Text guide coming soon.
Click to expand...
Click to collapse
Thanks for the helpfull information.
I have the files for BND-L24 uploaded and want to share same method of restore , for US version. As the method is the same.
Would it be ok to link to your thread from a new thread with L24 files attached , or add the backup here and just change the title?
mrmazak said:
Thanks for the helpfull information.
I have the files for BND-L24 uploaded and want to share same method of restore , for US version. As the method is the same.
Would it be ok to link to your thread from a new thread with L24 files attached , or add the backup here and just change the title?
Click to expand...
Click to collapse
Do as you like, I am good with anything.
Sudeep Duhoon said:
Do as you like, I am good with anything.
Click to expand...
Click to collapse
Ok. I like to keep thing simple. And to not complicate things as much as possible.
I will put this link to the L24 backed up images here.
File host folder with ==>BND-L24C567B140<== files
mrmazak said:
Ok. I like to keep thing simple. And to not complicate things as much as possible.
I will put this link to the L24 backed up images here.
File host folder with ==>BND-L24C567B140<== files
Click to expand...
Click to collapse
Thank you so much!! I've been looking for this all day yesterday!!
Will i have to flash all this file by twrp?
mrmazak said:
Ok. I like to keep thing simple. And to not complicate things as much as possible.
I will put this link to the L24 backed up images here.
File host folder with
Click to expand...
Click to collapse
Will i have to flash all this files by twrp? Liie flashing system.zip as system and flashing other images in partition? And if yes then there is other zip file 482 Mb how to flash it? Also in system ?
Will i be able to go to Emui 6 from Emui 8? I had manually flashed oreo.
Thanks
suryaxcharel said:
Will i have to flash all this files by twrp? Liie flashing system.zip as system and flashing other images in partition? And if yes then there is other zip file 482 Mb how to flash it? Also in system ?
Will i be able to go to Emui 6 from Emui 8? I had manually flashed oreo.
Thanks
Click to expand...
Click to collapse
All the post I see about manually flashing Oreo say you CAN NOT return to emui 5. So I would believe no
**EDIT**
I see now on firmware finder there are roll-back to emui 5.1 full-ota packages.
right now only for
BND-AL00
BND-AL10
BND-TL10
but perhaps after flashing that full ota to get partition table back , then follow this method from here to get correct regional specific parts back.
All still untested at this point
Suppose if I install Other rom first like AOSP or RR?
mrmazak said:
All the post I see about manually flashing Oreo say you CAN NOT return to emui 5. So I would believe no
Click to expand...
Click to collapse
Suppose if i install other rom RR or Aosp from Emui.and then can i ftry this method?
Thanks
suryaxcharel said:
Suppose if i install other rom RR or Aosp from Emui.and then can i ftry this method?
Thanks
Click to expand...
Click to collapse
I have no first hand information. Just that for RR you need to first update to Oreo, so same as before, the information at this point is, NO , roll-back is not able.
need help please
suryaxcharel said:
Will i have to flash all this files by twrp? Liie flashing system.zip as system and flashing other images in partition? And if yes then there is other zip file 482 Mb how to flash it? Also in system ?
Will i be able to go to Emui 6 from Emui 8? I had manually flashed oreo.
Thanks
Click to expand...
Click to collapse
What if you used recovery and went to stock but you don't have system updater and when you try to update firmware it keeps failing is there anyway to fix this on my bnd-l24?
P.S no longer have twrp
Can I try it on my Honor 7X BND-AL10 variant.??Please reply
riteshnaik77 said:
Can I try it on my Honor 7X BND-AL10 variant.??Please reply
Click to expand...
Click to collapse
Your other post show you are on Oreo. This method, files linked are Android nougat.
You need to replace twrp with stock recovery, then wipe cache from there. This should fix your bootloop ,caused by wipeimg cache in twrp. Unless there is more to the story than you tell.
mrmazak said:
Your other post show you are on Oreo. This method, files linked are Android nougat.
You need to replace twrp with stock recovery, then wipe cache from there. This should fix your bootloop ,caused by wipeimg cache in twrp. Unless there is more to the story than you tell.
Click to expand...
Click to collapse
OHHHHH!!!!..Thank you!
This is what I actually did so far.
1)I am on BND AL10 Oreo.
2)Unlocked the bootloader & rooted device.
3)Tried to flash Xposed using Magisk,Then my phone went to bootloop.
4)I tried to flash RR rom using fastboot mode.Then my phone gone mad, Now I can access TWRP ,But only for 10 sec.
5)PLEASE GUIDE ME TO A COMPLETE GUIDE WHERE I CAN FRESH START.
----------------------------------------------------------------------------------------------------------------------
riteshnaik77 said:
OHHHHH!!!!..Thank you!
This is what I actually did so far.
1)I am on BND AL10 Oreo.
2)Unlocked the bootloader & rooted device.
3)Tried to flash Xposed using Magisk,Then my phone went to bootloop.
4)I tried to flash RR rom using fastboot mode.Then my phone gone mad, Now I can access TWRP ,But only for 10 sec.
5)PLEASE GUIDE ME TO A COMPLETE GUIDE WHERE I CAN FRESH START.
----------------------------------------------------------------------------------------------------------------------
Click to expand...
Click to collapse
Well it twrp is not staying on, then fastboot will have to be the method to recover
Hope this will work
fastboot format cache
fastboot format userdata
If those not work, or not allowed try
fastboot -w
mrmazak said:
Well it twrp is not staying on, then fastboot will have to be the method to recover
Hope this will work
fastboot format cache
fastboot format userdata
If those not work, or not allowed try
fastboot -w
Click to expand...
Click to collapse
Thanks alot for your quick reply.Lemme try the method you have shared.
I did the steps in post. Was successfully able to downgrade from Oreon to Naugat. But Ota failed and phone into boot loop. Any suggestion
kavena78 said:
I did the steps in post. Was successfully able to downgrade from Oreon to Naugat. But Ota failed and phone into boot loop. Any suggestion
Click to expand...
Click to collapse
the downgrade is tricky , if not done with full downgrade files. It is pretty much a half full update, then restore a backup. There are many things that could cause trouble with this.
Did you try to factory reset after failed OTA?
mrmazak said:
the downgrade is tricky , if not done with full downgrade files. It is pretty much a half full update, then restore a backup. There are many things that could cause trouble with this.
Did you try to factory reset after failed OTA?
Click to expand...
Click to collapse
Unfortunately I do not have backup (can you share it pls if you have) after factory reset also same issue.
kavena78 said:
Unfortunately I do not have backup (can you share it pls if you have) after factory reset also same issue.
Click to expand...
Click to collapse
backup files are linked in the op
mrmazak said:
backup files are linked in the op
Click to expand...
Click to collapse
Op is that 1st post? It has link to update files in rar format