Firmware 23.4.A.1.200 D5803 US stock rom + Preroot - Xperia Z3 Compact General

I create an FTF file via Flashtool.
D5803_23.4.A.1.200_Customized US 1289-7524
FTF stock rom: http://www.fshare.vn/file/6NG4Y6NKJS2N
Preroot+Recovery: http://www.fshare.vn/file/KT61EOYJHK4J

Thanks man, but can you use another website? Its all in Vietnamese, not sure which link to use....

You can easily change the language to english from Right Upper Corner..

Which recovery did you use?

it should be TWRP i think..

Can u confirm, that the wifi is not broken?

I downloaded the files myself from sony update and flashed it, no issues with wifi here.

Nummer35 said:
Which recovery did you use?
Click to expand...
Click to collapse
dual recovery Ver 2.8.21

Noob question. I have rooted, and have recovery installed per the How-to. Guide, but now I want to upgrade to the latest Firmware.
Are these the proper steps to follow? I am confused because people always reference back to the How-to Guide, but that was from a non-rooted phone without recovery, so what should I do now with rooted and recovery installed?
I have downloaded the preroot+recovery.zip file... Are the following steps correct?
1. Put the .zip file in the internal memory
2. Boot into recovery
3. Flash the .zip firmware
Is that it?

guys the link wont download. can someone mirror it for me or link me to another flashable zip?
Sent from my D5803 using Tapatalk

@ah_hin should work....but wipe only cache and dalvik...
another way a bit more time consuming is to back-up the apps using Titanium and then do a full wipe (always better than a dirty flash) flash the new build and then restore apps. i did it that way and have no issues...
@ zike .... use the flashtool to download the latest tft then use the guide on how to create your own prerooted flashable, is faster than to look for a mirror that is available and fast.

Hi i have a big problem i wanted to root my xperia z3 compact so i unlocked the boot loader & i installed CWM Recovery v 6.0.4.7 the problem is when the phone start a pink light show up i can access to recovery mode when i press vol up but when i let it, it will be orange & reboot & the pink light show up again so i wiped data/factory reset but nothing happening & a message appear : E:unknown volume for path [/sd-ext] what's the solution plz

zike47222 said:
guys the link wont download. can someone mirror it for me or link me to another flashable zip?
Sent from my D5803 using Tapatalk
Click to expand...
Click to collapse
I second this. Though it works, it's very slow.

Related

Greek generic pre-rooted 12.1.A.1.201 & 205 (CWM zip)

12/06/2014: I created a Greek generic pre-rooted 12.1.A.1.205 made with @quetzalcoatl2435 guide.
Download.
07/04/2014: 12.1.A.1.201 made with @quetzalcoatl2435 guide. Includes be2_album for Bravia Engine fix.
Download.
Mirror but with zipped file (needs unzipping to get the flashable zip).
To root --> Follow this guide.
To CWM --> Follow this guide.
To flash Rom:
-------------
1. Boot in CWM.
2. Clear dalvik cache, wipe cache, wipe data.
3. Flash the Rom zip.
4. Flash SuperSU 1.93.
5. POWER OFF <-- Very important or you will get bootloop!.
6. (Old:Flash .201 kernel with flashtool in flashmode). Flash .205 kernel with flashtool in flashmode from a .205 ftf firmware file choosing first to exlude everything but kernel. Or you can flash .205 kernel sin file with flashtool in fastboot mode, guide.
subwrc said:
I created a Greek generic pre-rooted 12.1.A.1.201 made with @quetzalcoatl2435 guide.
Download.
To root --> Follow this guide.
To CWM --> Follow this guide.
To flash Rom:
-------------
1. Boot in CWM.
2. Clear dalvik cache, wipe cache, wipe data.
3. Flash the Rom zip.
4. Flash SuperSU 1.93.
5. Power off.
6. Flash .201 kernel with flashtool in flashmode.
Click to expand...
Click to collapse
Is the kernel same for all country's and Models ?
Rushaan™ said:
Is the kernel same for all country's and Models ?
Click to expand...
Click to collapse
According to this post i think so, but I can' t tell you for sure.
Thanks
subwrc said:
According to this post i think so, but I can' t tell you for sure.
Click to expand...
Click to collapse
Thanks for answering my question
Have a nice day
If it's a flash able zip, then why does your title says FtF
Sent from my C5303 using Tapatalk
neXus PRIME said:
If it's a flash able zip, then why does your title says FtF
Sent from my C5303 using Tapatalk
Click to expand...
Click to collapse
Oh sorry! I corrected it!
subwrc said:
I created a Greek generic pre-rooted 12.1.A.1.201 made with @quetzalcoatl2435 guide. Includes be2_album for Bravia Engine fix.
Download.
To root --> Follow this guide.
To CWM --> Follow this guide.
To flash Rom:
-------------
1. Boot in CWM.
2. Clear dalvik cache, wipe cache, wipe data.
3. Flash the Rom zip.
4. Flash SuperSU 1.93.
5. Power off.
6. Flash .201 kernel with flashtool in flashmode.
Click to expand...
Click to collapse
Thanks for this ,but for newbies the how to is a bit scant
for example -
Where is the Rom. zip as per -
3. Flash the Rom zip.
and is this all i have to do, as in will i then have Greek 12.1.A.201 on my phone after this -
6. Flash .201 kernel with flashtool in flashmode.
also, as this is a Greek rom, will i be able to read the menus as i am not Greek?
...please pardon all the noob questions, just wanna be sure so i dont brick my phone
b00b said:
Thanks for this ,but for newbies the how to is a bit scant
for example -
Where is the Rom. zip as per -
3. Flash the Rom zip.
and is this all i have to do, as in will i then have Greek 12.1.A.201 on my phone after this -
6. Flash .201 kernel with flashtool in flashmode.
also, as this is a Greek rom, will i be able to read the menus as i am not Greek?
...please pardon all the noob questions, just wanna be sure so i dont brick my phone
Click to expand...
Click to collapse
In (3) i mean to flash the downloaded rom from the link i gave, witch is a zip file.
Yes you can change language and read the menus.
Here is a detailed guide but for another rom file.
subwrc said:
In (3) i mean to flash the downloaded rom from the link i gave, witch is a zip file.
Yes you can change language and read the menus.
Here is a detailed guide but for another rom file.
Click to expand...
Click to collapse
Most appreciated subwrc
Please delete it.. wrong section..
Is this for C5302 or C5303?
Also, do you have to "wipe data" or can you keep your data so when you start the phone after completing the installation, all your apps still remain?
Xadious said:
Is this for C5302 or C5303?
Also, do you have to "wipe data" or can you keep your data so when you start the phone after completing the installation, all your apps still remain?
Click to expand...
Click to collapse
It's for C5303.
I think you can keep your data partition but haven't tried though. Do a backup first.
I am running 121A1201 official.What should i do to install this rom .I ask this because as i see this guide is referred to people who have not already updated to 201...
Thanks in advance!
Theorw said:
I am running 121A1201 official.What should i do to install this rom .I ask this because as i see this guide is referred to people who have not already updated to 201...
Thanks in advance!
Click to expand...
Click to collapse
You have to do everything from the beginning as described in the first post. Root, install recovery and flash rom.
Thank you for the kernel itself. My C5303 (Central Europe) now works flawlessly with ROOT. DooMLoRD kernel had problems with RAM.
I bit the bullet and done this upgrade (from android v4.12 to now android v4.3) and it went well
So now i have android 4.3 on my xperia sp and i also have my data intact too as i chose not to 'wipe data' before flashing, however i did clear dalvik cache and wipe cache.
Most important though, is that i can now use three (3 uk) 4g (LTE), which i couldnt use without upgrading to android v4.3
For the curious this is what I used (and i followed the instruction here -http://forum.xda-developers.com/showpost.php?p=51654818&postcount=1) -
- pre-rooted.C5303_12.1.A.1.201_Generic GR_1272-4887.zip - (the rom in this thread using the link provided by the OP in the 1st post in this thread)
- UPDATE-SuperSU-v1.93.zip - (using the link provided by the OP in the 1st post in this thread)
- recoverys_signed_040414_162006.zip --- (my new recovery - for more see here - http://forum.xda-developers.com/showpost.php?p=50359355&postcount=1)
Now that i am happy with the upgrade, my question to those who have upgraded to android v4.3 is this -
(1). for security i used to use LBE Security Guard in v4.12 and it worked okay, however the version i have does not seem to be working properly on android v4.3, especially the blocking of apps from using the internet (4g/LTE) ...any known solutions with regards to this app?
(2). Likewise for security i used to use Xprivacy on android 4.12 but however it too does not seem to be working properly all the time now and i suspect that its because i still have installed the version i had before upgrading to v4.3, any suggestions as to the version of Xprivacy that anyone on v4.3 are now using please?
correction
just realised no wifi after upgrade
wifi does turn on but no router shows up and i am surrounded with routers and even if i manually add a router or access point, it does not do anything when i click on the newly created access point.
Anyone having this issue and any suggestion pls?
b00b said:
correction
just realised no wifi after upgrade
wifi does turn on but no router shows up and i am surrounded with routers and even if i manually add a router or access point, it does not do anything when i click on the newly created access point.
Anyone having this issue and any suggestion pls?
Click to expand...
Click to collapse
You may have to try a clean install.
subwrc said:
You may have to try a clean install.
Click to expand...
Click to collapse
Actually the problem has been traced back to the ROM, something to do with symlink, see here for fix after upgrade -
http://forum.xda-developers.com/showthread.php?p=52662520
Thanks to the OP in that post, his post and subsequent solution saved me a lot of headache and maybe me posting this here will help others in a similar situation
Updated to .205.

[Update][Latest][6.0.1][Prerooted][23.5.A.1.291][Z2 tablet][SGP511][SGP512]

Hi
Here are flashable zip file wich installs latest Sony stock 6.0.1 Marshmallow ROM 23.5.A.1.291_R3D (VMo AU-NZ), SuperSu v2.76 and latest TWRP 3.0.20 with read and write acces to system. Because device is Wi-Fi only region doesn´t matter. Only difference is bloatware. Since Sony hasn´t push update to SGP511 I use SGP512 firmware which is working fine on my device. If you want you can edit build.prop file in /system -folder to correct model number as shown in screenshot.
Here is the link for new 6.0.1 firmware:
https://mega.nz/#!VcxGyRZK!U4NqLOSeg1X_3KNC1_xXm2WnH4_i2OoZ6NwuyaIR6Hw
MD5 is: D3B78445485765AB7BD3A163F2A6C4BD
Make nandroid backup before flashing.
Install it by flashing whole zip file via custom recovery. TWRP recommend. If coming from .570 or .575 firmware dirty flash with art/dalvik cache wipe is okay.
If coming from older firmware factory reset is most likely necessary with cache and dalvik/art cache wipes but anyhow recommend. If you want you can restore your data with TWRP after installation and reboot. This install compatible busybox. If you install incompatible busybox you may loose acces to TWRP.
After flashing .zip file if you are getting bootloop you have atleast two choises.
- With pc and Flashtool use your firmware original ftf -file and flash it by excluding "FOTAKernel", "Partition" and "System". In other words in "exclude section" tick these and don´t wipe anything. (Credits @AlanDS)
- Or download "bootloop fix" from here: https://mega.nz/#!BUxFxSAR!bPVEEDnsPz962JQ1uA2PKJv9tYLKA47N0fhA80ltEvw
(Credits @niaboc79 and @machao44) and flash it with TWRP
Here is the old 23.1.A.1.28 (Customized NCB) FTF -file link:
For SGP511: https://mega.nz/#!sVIn1IJI!Ywqoksuej83vNkc__nNrBy-im6tfLjWr_mbonMd6PPk
MD5 is: aab7e5728dccb59d44d5ebe38c34c8da
This version of firmware should be rootable. For instructions and download go here: http://forum.xda-developers.com/crossdevice-dev/sony/root-how-to-root-5-0-lollipop-t3212108
Credits: @Androxyde @Chainfire @[NUT] @IaguCool @zxz0O0 @Wolfbreak @shoey63 @serajr @championswimmer @russel5
Any news on sgp512? or I can use this one? thanks in advance
Cocolopes said:
Any news on sgp512? or I can use this one? thanks in advance
Click to expand...
Click to collapse
At the moment latest for SGP512 is .726 firmware but you can use this one.
kulvertti said:
At the moment latest for SGP512 is .726 firmware but you can use this one.
Click to expand...
Click to collapse
good...I miss something if I use this? I think the only difference its the internal memory...
Cocolopes said:
good...I miss something if I use this? I think the only difference its the internal memory...
Click to expand...
Click to collapse
Nope. Only difference between devices is memory size and your device regognize correct size even if you use this. Only thing is your device shows as SGP511 but you can chance that in build.prop file if you like.
Er... on my Z2 Tablet with .726 firmware there is no "Ultra Stamina" mode... or am I missing something?
Or is "Ultra Stamina" introduced only with this new firmware version??
Thanks, I just noticed this version was offered as a 21 MB system update on my current ROM (23.1.A.0.690 NCB). But this is much better :good:
hasenbein1966 said:
Er... on my Z2 Tablet with .726 firmware there is no "Ultra Stamina" mode... or am I missing something?
Or is "Ultra Stamina" introduced only with this new firmware version??
Click to expand...
Click to collapse
You are right. Chancelog is copy/pasted from universal source so there is device specific differencies and because this device is wifi only there is no ultra stamina mode.
kulvertti said:
You are right. Chancelog is copy/pasted from universal source so there is device specific differencies and because this device is wifi only there is no ultra stamina mode.
Click to expand...
Click to collapse
hey man...if I flash this I will losse all my internal sd data? or I only need to backup my apps and nothing more? (sorry if I ask to much things)
Cocolopes said:
hey man...if I flash this I will losse all my internal sd data? or I only need to backup my apps and nothing more? (sorry if I ask to much things)
Click to expand...
Click to collapse
For to be safe I recommend to make nandroid backup including kernel, system and data. However if something go wrong system backup with kernel might be enough to bring your device back.
This ain't wipe your internal sd on it's own so it is your choice.
Thanks man, you're always so fast! We should be getting 5.1 next month I read somewhere
Tap to awake isnt working, is ghis a known bug?
BLiapis said:
Tap to awake isnt working, is ghis a known bug?
Click to expand...
Click to collapse
Nope. Double tap to wake work fine here.
Factory reset coming from KK, everything working perfectly, including root/SU and double tap to wake.
In case anyone has similar issues, I couldn't download from Mega directly to device (it kept disconnecting at around 10%), had to download using PC and transfer using SD card.
Thanks Kulvertti for all the work you do for our device, it is much appreciated! :good:
Hello !
I am already on Lollipop & rooted, does updating thanks to the Sony update center will keep my root or does this flashable zip is mandatory to keep root ?
Thanks
Angeal Hewley said:
Hello !
I am already on Lollipop & rooted, does updating thanks to the Sony update center will keep my root or does this flashable zip is mandatory to keep root ?
Thanks
Click to expand...
Click to collapse
This will keep your root. About OTA, maybe with small updates but haven't tested it with latest update.
kulvertti said:
This will keep your root. About OTA, maybe with small updates but haven't tested it with latest update.
Click to expand...
Click to collapse
Thanks for the reply!
I flashed your zip to be 100% sure to keep root
issue
hey man,
I just spent like 2 hours trying to get CWM installed for castor windy. finally ended up using a combo of ADB "fastboot reboot-bootloader" reboot-boot <lightning-bolt-symbol/fastboot mode/select kernal to flash> and put in an extracted boot.img for CWM (nightly build). i then did "fastboot reboot" and rapidly pressed the volume up button. it worked and im now in CWM. I put your zip on my sd card before, and I navigated to that <apply update/choose from sdcard1/flashablesomeupdatedetailsidontwanttocopy.zip> (strangly I noticed that there were 2 identical "choose from sdcard1" options)
cwm paused for a second, then outputted
Install failed​Finding update package...
Opening update package...
E:footer is wrong
E:signature verification failed
Installation aborted​
sorry about my formatting of what I did, Im new to xda devs
thanks in advance for the help, and thank you for supporting a tablet that very few people seem to use
joeyishar said:
hey man,
I just spent like 2 hours trying to get CWM installed for castor windy. finally ended up using a combo of ADB "fastboot reboot-bootloader" reboot-boot <lightning-bolt-symbol/fastboot mode/select kernal to flash> and put in an extracted boot.img for CWM (nightly build). i then did "fastboot reboot" and rapidly pressed the volume up button. it worked and im now in CWM. I put your zip on my sd card before, and I navigated to that <apply update/choose from sdcard1/flashablesomeupdatedetailsidontwanttocopy.zip> (strangly I noticed that there were 2 identical "choose from sdcard1" options)
cwm paused for a second, then outputted
Install failed​Finding update package...
Opening update package...
E:footer is wrong
E:signature verification failed
Installation aborted​
sorry about my formatting of what I did, Im new to xda devs
thanks in advance for the help, and thank you for supporting a tablet that very few people seem to use
Click to expand...
Click to collapse
Install Dualrecovery from here: http://forum.xda-developers.com/showthread.php?p=53661356 and use TWRP to flash .zip file.
kulvertti said:
Install Dualrecovery from here: http://forum.xda-developers.com/showthread.php?p=53661356 and use TWRP to flash .zip file.
Click to expand...
Click to collapse
First: Thanks to Kulvertti for all his work.
I am still confused. Do I need to root my device on forehand?
What I have understood so far:
You don't have to have root to flash NUT's [TABZ2][TWRP][PhilZ Touch][CWM] XZDualRecovery (It won't bring you root either).
So you can flash this recovery as long as you are on unrooted but rootable stock firmware (e.g. 17.1.2.A.0.314).
Then can flash this pre-rooted stock Lollipop ROM 23.1.A.1.28 and you will have root.
So only 3 steps to go from unrooted stock Lollipop to to this pre-rooted Lollipop?
1) flash rootable firmware (from PC, using flashtool).
2) flash "NUT's" recovery (from PC, using NUT's installer).
3) flash this pre-rooted stock Lollipop ROM (from sdcard1, using TWRP recovery)
Is this correct??

[FTF][PRF][C6902]XPERIA Z1 Customized INDIA 14.6.A.1.216 (both FTF & Pre-rooted)

Hi Guys,
I have uploaded the latest Xperia Z1 firmwire (14.6.A.1.216). This is Customized India version of the firmware. Happy Flashing.
FTF: Stock Firmwire from Xperifirm
Google Drive:https://drive.google.com/file/d/0By3wU4_J-OtSc1AzX1VGVHBGaWM/view?usp=sharing
Mega Link:https://mega.nz/#!Zl5G2L7a!ApEVE_cnByb8d6mGrdkfHShuJG8fw-fJ0O_NCJQaLTc
PRE-Rooted Firmwire: Added, with Dual recovery and SuperSU V2.48. The Zip is signed
Google Drive:https://drive.google.com/file/d/0By3wU4_J-OtSTzZFNlBPanhBdTQ/view?usp=sharing
Mega Link:https://mega.nz/#!ZoI3kSZT!Ka2yNisE_vN2bcsTTNHxvkR5NzWQ--uuhTJcfnoA10M
credits:
Sony- obviously!!, for the awesome Xperia Z1 and this update
IaguCool -for Xperifirm
Androxyde & DoomLord-for Flashtool
zxz0O0-for PRF creator
Pre-Rooted Firmwire added!!
Google Drive links soon...
Procedure:
Full wipes
Flash preroot
Flash supersu
Flash xzdualrecovery
Or
Only wipes and flash prerooted zip
Enviado desde mi C6902 usando Tapatalk 2
@ismaelghr Only wipe and flash Pre-Rooted Firmwire
Is for c6903 to? Or is only to c6902?
Enviado do meu C6903 através de Tapatalk
@Botandroid Only C6902..
Good.
Needed help on flashing
hi. i am new to this flashing stuffs. i currently run on generic 4.4.2 rooted on my Z1. i am looking for Pre-rooted stock 14.6.A.1.216. can someone help me how to flash my mobile step-by-step?
Siddharth Mahendran said:
hi. i am new to this flashing stuffs. i currently run on generic 4.4.2 rooted on my Z1. i am looking for Pre-rooted stock 14.6.A.1.216. can someone help me how to flash my mobile step-by-step?
Click to expand...
Click to collapse
@Siddharth Mahendran You should have a Recovery installed on your phone before flashing a Pre-Rooted firmware...
Use Xperia [Nut]'s Dual recovery installer for Xperia Z1: http://nut.xperia-files.com/?ql=162303ad4b67ec4f7c00159b1de0e18807279c4a
If the Procedure hasn't changed(Becoz its been long since I used it), It should have .bat file or some kind of command line script. Have USB debugging and unknown sources enabled on your device. Connect your phone to ur PC and execute the bat file. It should search for the device and it will install the Dual Recovery.
Then, Copy the pre-rooted firmware that you downloaded from here into your phone. Reboot your phone, while booting the notification LED will light up, and then press Volume Down/Up button, based on the recovery you want. Then, wipe system, data, cache and dalvik cache using the option like wipe/format based on the recovery you are using. Then, Choose install->search for the Pre-rooted Firmware you copied,select it and Confirm installation. Once Completed, Reboot device.
Remember That, First boot will take a long time, be patient...
Backup all data before, trying anything on XDA!!!!
I am not responsible, if you do anything wrong or something went wrong in the Procedure!!!
Gladwin_Prince said:
@Siddharth Mahendran You should have a Recovery installed on your phone before flashing a Pre-Rooted firmware...
Use Xperia [Nut]'s Dual recovery installer for Xperia Z1: http://nut.xperia-files.com/?ql=162303ad4b67ec4f7c00159b1de0e18807279c4a
If the Procedure hasn't changed(Becoz its been long since I used it), It should have .bat file or some kind of command line script. Have USB debugging and unknown sources enabled on your device. Connect your phone to ur PC and execute the bat file. It should search for the device and it will install the Dual Recovery.
Then, Copy the pre-rooted firmware that you downloaded from here into your phone. Reboot your phone, while booting the notification LED will light up, and then press Volume Down/Up button, based on the recovery you want. Then, wipe system, data, cache and dalvik cache using the option like wipe/format based on the recovery you are using. Then, Choose install->search for the Pre-rooted Firmware you copied,select it and Confirm installation. Once Completed, Reboot device.
Remember That, First boot will take a long time, be patient...
Backup all data before, trying anything on XDA!!!!
I am not responsible, if you do anything wrong or something went wrong in the Procedure!!!
Click to expand...
Click to collapse
thanks. I will try this once the .zip file got downloaded
Gladwin_Prince said:
@Siddharth Mahendran You should have a Recovery installed on your phone before flashing a Pre-Rooted firmware...
Use Xperia [Nut]'s Dual recovery installer for Xperia Z1: http://nut.xperia-files.com/?ql=162303ad4b67ec4f7c00159b1de0e18807279c4a
If the Procedure hasn't changed(Becoz its been long since I used it), It should have .bat file or some kind of command line script. Have USB debugging and unknown sources enabled on your device. Connect your phone to ur PC and execute the bat file. It should search for the device and it will install the Dual Recovery.
Then, Copy the pre-rooted firmware that you downloaded from here into your phone. Reboot your phone, while booting the notification LED will light up, and then press Volume Down/Up button, based on the recovery you want. Then, wipe system, data, cache and dalvik cache using the option like wipe/format based on the recovery you are using. Then, Choose install->search for the Pre-rooted Firmware you copied,select it and Confirm installation. Once Completed, Reboot device.
Remember That, First boot will take a long time, be patient...
Backup all data before, trying anything on XDA!!!!
I am not responsible, if you do anything wrong or something went wrong in the Procedure!!!
Click to expand...
Click to collapse
@Gladwin_Prince Thanks bro. Changed to Android 5.1.1. I see no amazing features in lollipop.thats disappointing
gonna port needed apps
lol i softbrick my device!
I tried to flash stock ftf using flashtool but still no use!
restarts on booting! what to do now?
I mean which files i do include or exclude? and what to do when it ask to use fsc script found?
Nagesh_Noddy said:
lol i softbrick my device!
I tried to flash stock ftf using flashtool but still no use!
restarts on booting! what to do now?
I mean which files i do include or exclude? and what to do when it ask to use fsc script found?
Click to expand...
Click to collapse
Just use the latest Flashtool, it should solve all the problems with the fsc script... To recover your device from softbrick, don't exclude anything, make sure all wipes are checked and you are good to go. hope that helps.
Gladwin_Prince said:
Just use the latest Flashtool, it should solve all the problems with the fsc script... To recover your device from softbrick, don't exclude anything, make sure all wipes are checked and you are good to go. hope that helps.
Click to expand...
Click to collapse
I flashed .108 by flashtool with user-data.sin and exclude some items! rooted by rootkit! install nut recovery now again ready to flash pre-rooted .216!
tysm for firmware
Installed this and deodexed as well, xposed doesnt work. Any solutions?
Thanks.
timvonlee said:
Installed this and deodexed as well, xposed doesnt work. Any solutions?
Thanks.
Click to expand...
Click to collapse
Xposed works with .216 firmware. Running it myself.
Have you downloaded the correct 2 files for running xposed on lollipop?
motorazrv3 said:
Xposed works with .216 firmware. Running it myself.
Have you downloaded the correct 2 files for running xposed on lollipop?
Click to expand...
Click to collapse
Can you Give the link for correct xposed? i reverted back to 4.4.2 since xposed didnt work fo me
Siddharth Mahendran said:
Can you Give the link for correct xposed? i reverted back to 4.4.2 since xposed didnt work fo me
Click to expand...
Click to collapse
I think the system isn't getting mounted as rw, and since xposed installer writes to system, it is failing to install. Kindly tell me how to mount system as rw since even after deodexing it isn't getting mounted.
timvonlee said:
I think the system isn't getting mounted as rw, and since xposed installer writes to system, it is failing to install. Kindly tell me how to mount system as rw since even after deodexing it isn't getting mounted.
Click to expand...
Click to collapse
Sorry. idk about that.maybe senior members would help
Hi! can you update this with the the latest release 236?

C6902 Z1 Stock Customized IN 14.6.A.1.236 Pre-Rooted Flashable ZIP

i could'nt find the flashable zip for .236 update so i'am sharing this
Instructions:
1. Wipe everything using recovery
2. flash the provided pre rooted zip file
Download Link
Xperia Z1-Customized IN-14.6.A.1.236 prerooted-signed.zip
you can find the DEODEX patch here
how to flash it
Please help me in flashing it. I don't know how to flash it. I'm new to it
sharathkumar said:
i could'nt find the flashable zip for .236 update so i'am sharing this
Instructions:
1. Wipe everything using recovery
2. flash the provided pre rooted zip file
Download Link
Xperia Z1-Customized IN-14.6.A.1.236 prerooted-signed.zip
you can find the DEODEX patch here
Click to expand...
Click to collapse
Is there a need to download and flash DEODEX after flashing your zip file?
and how do i update SuperSU & BusyBox ? as when i try to flash the 2.82 flashable using twrp i get into bootloop.
(am using C6902_14.6.A.1.236_XZDRKernel2.8.26 Kernal)
Rishabh ghai said:
Please help me in flashing it. I don't know how to flash it. I'm new to it
Click to expand...
Click to collapse
This is the zip file that needs to be flashed using Customer Recovery,
There are various post on how you can have custom recovery on your phone,
but make sure which is the exact model of Z1 you have first there are various types in it am using Z1 C6902 varient.
1. i used Kingroot to root my device
2. installed BusyBox
3. Backup DRM Keys using TA Backup tool and fallow the instructions
4. Unlock Bootloader
5. Flash Custom Recovery like TWRP/CWM/Philz.
as i havent found a suitable ftf for my c6902 yet so is flashing this zip different from flashing ftf in flashtool? can i flash it from lineage os 14? thanks
Hard Bricked, No powering on, No charging up, Not detectable in PC
Hi there,
I have hard-bricked my Sony Xperia Z1 C6902. Now I am not able to do anything with the set. I have tried to enter into emergency mode by using Testpoint and s1tool. It is successfully installed the drivers but when I tried flashing the firmware. I am getting an error "A device attached to this system is not functioning".
Does anyone have any idea of how to unbrick the set using testpoint and s1tool?? or any other alternate methods to bring the phone back into life??
Any help is much appreciated.
I need BR
My phone gets bricked everytime I use non-brazilian ftf's, can you please help me finding it?
P.S.: There's a post around, but the file is undownloadable...

[D6603][6.0.1][Customized DE] Stock Sony Pre-rooted + Recovery flashable 23.5.A.0.570

Hey,
here is the prerooted + recovery TWRP flashable zip of Android Marshmallow for the D6603 Xperia Z3!
Downloaded with newest Version of XperiFirm than extracted by flashtool and created the tft with the right excluded files.
Zip created by a own compiled build of PRF Creator.
It includes RecRootV3 Forum Link
So it has these feautures:
-New TWRP 3.0.2 Recovery from shoey63
-ByeSELinux
-RIC Defeat
-Fixed sqsh mount in Script
-Updated Busybox
-SuperSU 2.71 in System Mode
Click to expand...
Click to collapse
How to:
1. Boot in Recovery
2. Make a "Factory Reset"
3. Install zip downloaded here
4. Wipe Cache + Dalvik Cache
5. Restart
Download:
Part1
Part2
Have Fun!
Credits:
Wolfbreak for RecRootV3
Hi, thanks for your work, :good:
Why 2 part,
One part and mega link please,
blameSTART said:
created the tft with the right excluded files.
Click to expand...
Click to collapse
What is means? Which files are excluded? Can you share, please.
Gladyator23 said:
Hi, thanks for your work, :good:
Why 2 part,
One part and mega link please,
Click to expand...
Click to collapse
No Problem
2 Parts because free users can download it 2
I upload it there because i have a uploaded account and not a mega account ^^
artlov said:
What is means? Which files are excluded? Can you share, please.
Click to expand...
Click to collapse
I excluded the loader.sin and the *.ta files, they are not necessary.
Hi. Thanks for the flashable ZIP.
I've flashed it, but now I have no root and no recovery...
Is there a way to fix this?
Update: after few tries of updating the SU Binary and phone resets root started to work (still Binary is not up to date - "#" is being displayed over time)
How should I reinstall TWRP 3.0.2? There is no version for D6603...
doogie333 said:
Hi. Thanks for the flashable ZIP.
I've flashed it, but now I have no root and no recovery...
Is there a way to fix this?
Click to expand...
Click to collapse
Hi,
From my experience: No. You have to return to LP and to start over again with rooting etc.
On my personal device (D6603) none of the prerooted ROMs since the first LP variants provided here keeps Root and Recocery. Don't know why... I helped myself always with flashing:
1) ROM
2) SuperSU
3) Recovery
4) xPosed
over again one directly after the other. Of course you will need a rooted ROM with recovery for this, but it's much easier to get with older ROMs.
I think same will be here: Get the ROM, get Wolfbreak's RecRoot. Then flash both from a recovery one after the other, clear cache and Dalvik cache and reboot. That's it...
Cheers
Zap
Did you used a dummy file instead of SuperSu.zip? Wolfbreaks RecRoot has SuperSu built in...
http://forum.xda-developers.com/showthread.php?p=66569775
Sent from my Z3 Monster using XDA Free mobile app
I flashed exaclty this rom to my phone and i got root + Recovery.
It should work :/
Please upload it somewhere else where I don't have to wait 6 hours for downloading. And what is the difference between these two parts?
Flockrock said:
Please upload it somewhere else where I don't have to wait 6 hours for downloading. And what is the difference between these two parts?
Click to expand...
Click to collapse
Just download these 2 parts and you can unpack it with for example winrar
Deleted
post deleted

Categories

Resources