[ROOT-FLASHABLE] Lollipop [UPDATE] - Moto E General

Lollipop Update for rooted Moto Es. This is the final update package as no changes have been made to the ROM by Motorola after the soak test.​This is the Lollipop update for rooted XT1021s, XT1022s and XT1023s.Download links below. Please read the notes carefully before you do anything. Credits to the people who uploaded the soak OTA.
---------------------------------------
Read this carefully.
This update is only for the XT1022 running stock firmware and not CM11.
Make sure that you haven't modified anything inside the internal (system) partitions or removed any packaged apps. If you have done so, undo those changes or customize the package as per the instructions given at the end.
This ROM has been tested by more than 1000 users and is working. Of something fails, that's because you messed it up, not the ROM.
Place the ZIP on your SD card, boot up your custom recovery and flash (I think that this is self-explanatory). (You may also side-load).
I suggest that you uninstall Link2SD and then reinstall it after you update, it causes debuggerd issues.
---------------------------------------
Download link: http://filestorm.cf/rM.
DevHost: XT1022_root-flashable-update-5.0.2_signed.zip - 341.40 MB
---------------------------------------
Use TWRP, here. Thanks to @gaurav2009 for pointing this out.
Do not use a deodexed/modified/debloated ROM. Use this ROM. Thanks again to @gaurav2009 and @luvk1412 for pointing this out.
---------------------------------------
Customizing the update package
You need a bit of experience to do anything listed below.
TAKE A NANDROID BACKUP!
Flash the ZIP mentioned in this post.
If an error occurs, copy the ZIP to your PC and extract it.
Go to 'extracted_folder/META-INF/com/google/android'
Edit the updater-script and remove the assert, 'apply_patch' and 'apply_patch_check' and 'sha1_check' lines that refer to the files mentioned in the error you saw.
ZIP the folder again (Make sure that you don't change the directory structure).
Download ZipSigner for Windows and sign the package.
Flash the signed ZIP and repeat the procedure for all errors you see.
---------------------------------------
Troubleshooting
Errors with 3c_main/LatinIME/*.apk-Try and find the stock application and install it. That's it.
Errors with debuggerd- Uninstall link2sd. If issues persist, find a stock KitKat debuggerd.
ADB Sideload - device not found- (WINDOWS) Install drivers -> Go to Device Manager -> Find XT1022/Unidentified Device->Update Driver->Select Manually From List->Android Device->Motorola USB Interface->Install it.
Generic Advice- If something errors, restore a stock version. If everything seems too complex, flash back to stock.
---------------------------------------
I've tried my best to make sure that you don't brick your device but as always, you do this at your own risk and please don't hold me responsible. For noobs who can't manage a nandroid backup, go and revert to stock.​---------------------------------------
Post any errors you can't solve here and I'll try and fix them ASAP.

Sure mate. All the best.

tech_master said:
I'm working on a root-flashable Lollipop update. It'd be ready by this evening. I'd be grateful if someone could give me error logs when they try to flash the soak test ZIP. It'd make by job much easier. Cheers and enjoy the sweet new lollipop.
Click to expand...
Click to collapse
Root flashable mean the rom which can b flashed in custom recovery n which is pre rooted
correct me if i'm wrong

akash.mahadeshwar said:
Root flashable mean the rom which can b flashed in custom recovery n which is pre rooted
correct me if i'm wrong
Click to expand...
Click to collapse
Yeah. That's it. Could anyone give me those error logs?

tech_master said:
Yeah. That's it. Could anyone give me those error logs?
Click to expand...
Click to collapse
Yup i'll give it a try to flash your rom n tell you the error if i get any...

tech_master said:
I'm working on a root-flashable Lollipop update. It'd be ready by this evening. I'd be grateful if someone could give me error logs when they try to flash the soak test ZIP. It'd make by job much easier. Cheers and enjoy the sweet new lollipop.
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I tried to sideload via stock recovery and got this error.

tech_master said:
I'm working on a root-flashable Lollipop update. It'd be ready by this evening. I'd be grateful if someone could give me error logs when they try to flash the soak test ZIP. It'd make by job much easier. Cheers and enjoy the sweet new lollipop.
Click to expand...
Click to collapse
so that means, it will work even if we have made some changes in the rom and have custom recovery??
Will this work if I am on CM11 ?? or I have to install the stock rom??

shivamg95 said:
so that means, it will work even if we have made some changes in the rom and have custom recovery??
Will this work if I am on CM11 ?? or I have to install the stock rom??
Click to expand...
Click to collapse
You can't flash stock 5.0.2 files on CM . Either installation will be aborted or you will be in bootloop !

prince.d.emperor said:
You can't flash stock 5.0.2 files on CM . Either installation will be aborted or you will be in bootloop !
Click to expand...
Click to collapse
So we need to flash unmodified stock kikat rom for it??

The update is up!
Just uploaded the update. Refer to the first post.

this filehosting site is very slow,can you upload in another site ?

tech_master said:
Just uploaded the update. Refer to the first post.
Click to expand...
Click to collapse
You have reached the maximum concurrent downloads. Please wait for your existing downloads to complete or register for a premium account above. error given by website any miror
---------- Post added at 04:21 PM ---------- Previous post was at 04:21 PM ----------
raj.amalw said:
I tried to sideload via stock recovery and got this error.
Click to expand...
Click to collapse
get same eror found no solution

@ luvk1412, I'm now mirroring to dev-host. Just a few minutes.

tech_master said:
@ luvk1412, I'm now mirroring to dev-host. Just a few minutes.
Click to expand...
Click to collapse
can you help regarding sideloading eror in the above screenshot
nd how much time it will take to upload
EDIT: no wonder how but the update poped up automatically..doing fingerscrossed

@luvk1412
Just uploaded to DevHost.
XT1022_root-flashable-update-5.0.2_signed.zip - 341.40 MB

Should i unroot before flashing the zip? I have flashed stock rom with no modifications. The thing is it is rooted.

getting an error. " /system/app/ 3c_main.apk(sometimes LatinImeGoogle.apk)" has unexpected contents

I don't think that unrooting is needed. Also, any updates by people who downloaded? The file's been downloaded 25+ times and yet everyone is silent. And yeah, take a backup before you proceed. Now fixing issue reported by @chaithu5.

I have cm11 rom . Can I still flash this ? Or do I need to flash stock rom and then flash ?

tech_master said:
I don't think that unrooting is needed. Also, any updates by people who downloaded? The file's been downloaded 25+ times and yet everyone is silent. And yeah, take a backup before you proceed. Now fixing issue reported by @chaithu5.
Click to expand...
Click to collapse
check out my post http://forum.xda-developers.com/showpost.php?p=58797184&postcount=17

Related

[ROM] [4.4.x] CyanFox Rom [OFFICIAL]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Credit to @vedantgp (me!)
http://www.cyanfox-rom.com/
CyanFox is a light-weight Android 4.4.x custom ROM, which is based on AOSP/Android (4.4) and CyanogenMod (11.0) source bases.
CyanFox features:
- Dark UI mode
- Paranoid Halo notifications
- Screen Recording
- NavBar settings and native enabling
Features in progress:
- Unread notifications count-icons with new 4.4 API for any app/launcher
- Apps sidebar-launcher
- Advanced Recent Apps RAM bar
- Multi-color/alpha status/nav bars
- Network speed indicator in status bar
- List view animations
- More new features coming soon...
https://github.com/CyanFox
https://github.com/CyanogenMod/android_kernel_samsung_jf/tree/cm-1110/kernel
Email us at: [email protected]
Download at http://www.cyanfox-rom.com/downloads/
Please submit bugs to: https://code.google.com/p/cyanfox/issues/list
And feature requests to: http://cyanfox.uservoice.com/forums/220748-general
Help us out!
http://forum.xda-developers.com/donatetome.php?u=5302565
Our current build server:
- 96 GB RAM
- 24 Cores
- 960 TB HDD
Credits to:
Mantas Zilius [MNT]
http://www.cyanfox-rom.com/
https://plus.google.com/u/0/communities/103538505102439103284
Wanna Help?
We need help from designers to help us make our logo and other elements. If you are interested, please follow the link below, made by my friend SystemErrorOne
http://forum.xda-developers.com/showthread.php?t=2484228
​
Instructions for Installation
[May vary on firmware, i will be vague]
Make sure your handset is on 100% battery
PREREQUISITES:
-Root
-Custom Recovery [CWM/TWRP]
1. Download latest zip file and GAPPS from http://cyanfox-rom.com/downloads/
2. Place these two zip files in the SD of your handset [internal or external]
3. Backup all of your data using Titanium Backup, or any other backup software you might have, as the device will be wiped in the process.
4. Reboot to Recovery by pressing and holding Volume Up and Down while pressing the power button while the device is turned off
5. Perform a factory reset
TWRP
6a. Press Install and guide yourself to where you put your Cyanfox zip file
6b. Press add more zips and guide yourself to where you put the GAPPS zip file
6c. Press Install
CWM
6a. Use volume keys to "Install zip"
6b. Navigate to your cyanfox zip file
6c. Repeat step 6b for Gapps file
If upgrading from a previous version or switching from CM11
6a. Dirty flash
6b. Flash Gapps
7. Wipe Cache
8. Reboot and enjoy
Screenshots​
Images are courtesy of @varben
Version numbers subject to change due to OS version
FAQ
"Omigod I'm stuck in a bootloop!"
Code:
Don't panic. Just factory reset and try again...
"I accidentally wiped everything including the internal SD!"
Code:
Just load the ROM onto an SD card and pop it into your phone
"I accidentally wiped everything including the internal SD and i don't have an SD card!"
Code:
adb sideload
"Where can i report bugs?"
Code:
Device specific bugs go to the CyanogenMOD maintainer. Overall bugs come to us
Feel free to post though to see if there is a quick fix, or a workaround
"What does the fox say?"
Code:
ring-a-ding-ding-ding-ding-a-ding
"Why isnt there more FAQ?"
Code:
Not alot of people have encountered issues beyond this... They have been fixed btw...
Nice job...
Seems interesting!
Sent from my SGH-I897 using xda app-developers app
keller.jeff said:
Seems interesting!
Sent from my SGH-I897 using xda app-developers app
Click to expand...
Click to collapse
It's a very smooth and stable rom..
Must try... :laugh:
my i96 thats the rogers version keeps failing with a status 7
xanda143 said:
my i96 thats the rogers version keeps failing with a status 7
Click to expand...
Click to collapse
Try Redownload rom.... Maybe bad download....
Sent from my GT-I9100 using Tapatalk 4
Been using this ROM since yesterday, and so far everything is running great. Good job. :good:
xanda143 said:
my i96 thats the rogers version keeps failing with a status 7
Click to expand...
Click to collapse
i will try to find a fix. the i896 is a carbon copy of the i897, with the rogers logo. it shouldnt be too much of a problem.
can you give me details on your current rom? recovery? any other variables?
vedantgp said:
i will try to find a fix. the i896 is a carbon copy of the i897, with the rogers logo. it shouldnt be too much of a problem.
can you give me details on your current rom? recovery? any other variables?
Click to expand...
Click to collapse
i see you most likely have an outdated kernel try flashing this one: http://forum.xda-developers.com/showthread.php?t=1816087
tell me what happens
can somebody give me another link for download, i am unable to download the rom, have tried multiple times... it just stops in the middle.
thankyou.
My efs folder became blank after installing this ROM. I do have a backup but when I copy it to the root of the phone and restart it my IMEI stays unknown, and cant get service? Am I supposed to set some permissions or something?
I came from 4.1.2 MIUI ROM, now I flashed back to that ROM and everything is fine. This is really weird.
sleeper994 said:
My efs folder became blank after installing this ROM. I do have a backup but when I copy it to the root of the phone and restart it my IMEI stays unknown, and cant get service? Am I supposed to set some permissions or something?
I came from 4.1.2 MIUI ROM, now I flashed back to that ROM and everything is fine. This is really weird.
Click to expand...
Click to collapse
yeah that happens..
whenever you flash 4.3 over 4.1.2 or 4.0.4 then the IMEI no becomes invalid..
In your case you need to flash the rom again after you restored the files in the efs folder..
that is why your IMEI no got restored when you flashed back to MIUI....
:laugh:
I wont be able to do it for a while, but is it possible anyone can upload their own screenshots? i will post it on the OP, and give credit to you. thanks in advanced
amit.mastermind90 said:
can somebody give me another link for download, i am unable to download the rom, have tried multiple times... it just stops in the middle.
thankyou.
Click to expand...
Click to collapse
it does? weird... its working fine for me... try on a different computer, or try at starbucks (use their wifi).
I've got to say this is great ROM!!! I have used A LOT of different ROMs, but this one is probably the smoothest and fastest one ever. Thanks Cyanfox
vedantgp said:
it does? weird... its working fine for me... try on a different computer, or try at starbucks (use their wifi).
Click to expand...
Click to collapse
yea, i am on a relatively slow connection...!! so i guesss i will have to download this file else where....!!!
---------- Post added at 09:16 PM ---------- Previous post was at 09:13 PM ----------
also, i read in the features list, this rom has network speed indicator in statusbar.. can anybody tell me the position of it. i mean extrem left or extreme right or right before signal bars..!! thanku.
got it.. nd after some patience i was finally able to download the rom. and this rom is awsome:good::good:
i flashed cyancore kernel and everything is good.
sleeper994 said:
I've got to say this is great ROM!!! I have used A LOT of different ROMs, but this one is probably the smoothest and fastest one ever. Thanks Cyanfox
Click to expand...
Click to collapse
sweet, glad you like it. i dont know why, but people seem to say that this is faster than stock cm... keep updated for the v1 update....
http://www.cyanfox-rom.com/2013/10/06/big-changes-comming/
videos arnt workin in default video player, they r working fine in mx player but with sw encoder, is it because i flashed custom kernel ??

[STOCK][ODIN] ! ! New GT-P3113UEUCMK3

THIS IS FOR USE WITH ODIN ONLY!
If you do not know what I'm talking about in this post or understand exactly what performing this will do, I HIGHLY recommend you educate yourself on the use of ODIN before going any further.
NEW LINK: GT-P3113UEUCMK3
This does not belong to me. You do not need permission to use this! And since myself (and others) have a hard time downloading from those 3rd and 4th party Samsung firmware sites, I uploaded it to a much more stable/secure/reputable host site.
PIT file can be downloaded here. BE SURE to hit thanks on mythi's OP!
ENSURE you choose the correct file to download! It's labeled : 7.0p311x.zip
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thanks a lot!
Does it fix the lag?
Luigi2012SM64DS said:
Does it fix the lag?
Click to expand...
Click to collapse
I noticed that it does. I won't say definitively until I've run this thru a few battery discharges first. It includes an updated kernel as well.
♢NoteIII♢
This thread need to be in general section
I don't see any development in this thread....
Any way uploading to a good host is good and sharing is best....
Sent from my GT-N7100 using XDA Premium 4 mobile app
Edit: UC is for Cellular USA (The name is correct)
Thanks for the update
PM sent to mod to switch to the general section. Thanks Adi
♢NoteIII♢
That was quick. LOL
♢NoteIII♢
Is the source code for this kernel anywhere?
Derp nevermind
Sent from my One using XDA Premium 4 mobile app
If you like a StockBased Rom use MicroDelta from @Tsjoklat --- > http://forum.xda-developers.com/showthread.php?t=2405410
(for P3110 and P3113)
---------- Post added at 11:47 PM ---------- Previous post was at 11:42 PM ----------
daavvis said:
Is the source code for this kernel anywhere?
Derp nevermind
Sent from my One using XDA Premium 4 mobile app
Click to expand...
Click to collapse
http://opensource.samsung.com/ ?
---------- Post added at 11:49 PM ---------- Previous post was at 11:47 PM ----------
btw. http://opensource.samsung.com/reception/receptionSub.do?method=sub&sub=F&searchValue=gt-p3113 ?
Can anyone please tell me what's new over august's 4.2.2 update (P113UECMH2)?
Thank you.
i feel like a complete noob ... but does this just get loaded onto the tab with odin as if it were being rooted?
xRogueXxSniperX said:
i feel like a complete noob ... but does this just get loaded onto the tab with odin as if it were being rooted?
Click to expand...
Click to collapse
Not quite sure what you mean... This is the latest full stock ROM (not rooted), flashed with Odin using a standard procedure.
kt-Froggy said:
Not quite sure what you mean... This is the latest full stock ROM (not rooted), flashed with Odin using a standard procedure.
Click to expand...
Click to collapse
ok, i have mine rooted but i want to update it from android 4.1.1 to 4.2.2 ... how would i go about doing that?
xRogueXxSniperX said:
ok, i have mine rooted but i want to update it from android 4.1.1 to 4.2.2 ... how would i go about doing that?
Click to expand...
Click to collapse
Couple of options come to mind... You can flash this stock 4.2.2, but you'll have to root it again afterwards (and install a custom recovery, if you want). Otherwise, you can go with MicroDelta by @Tsjoklat -- it's a very nice ROM, and the latest version of it is built on this exact base. It will be a full wipe in both scenarios, though.
ok so if a take this file and flash it with odin ill have to wipe the tab first ... or are you saying that the tab will automatically be wiped?
i dont have anything important on it so it doesnt really matter to much
thanks for any and all help
xRogueXxSniperX said:
ok so if a take this file and flash it with odin ill have to wipe the tab first ... or are you saying that the tab will automatically be wiped?
Click to expand...
Click to collapse
If you flash this package via Odin, it will wipe everything -- you don't have to do it manually. It will also revert the recovery back to stock, if you have a custom one installed now.
Make sure you read carefully how to use Odin, if you haven't used it before -- there are ways to screw up your device pretty badly.
kt-Froggy said:
If you flash this package via Odin, it will wipe everything -- you don't have to do it manually. It will also revert the recovery back to stock, if you have a custom one installed now.
Make sure you read carefully how to use Odin, if you haven't used it before -- there are ways to screw up your device pretty badly.
Click to expand...
Click to collapse
i have read up on Odin before but ill do it again.
do you have any idea on why my computer wont unzip the file?
xRogueXxSniperX said:
do you have any idea on why my computer wont unzip the file?
Click to expand...
Click to collapse
Which file? The actual Odin-flashable package linked in the OP? I don't know... It's in TAR format, but the extension is *.tar.md5, so your OS may not recognize it. But you don't need to unzip it -- Odin will process this file as is. It's a good idea to verify the MD5 checksum (it's on the download page) before flashing, to make sure your download is not corrupt.
kt-Froggy said:
Which file? The actual Odin-flashable package linked in the OP? I don't know... It's in TAR format, but the extension is *.tar.md5, so your OS may not recognize it. But you don't need to unzip it -- Odin will process this file as is. It's a good idea to verify the MD5 checksum (it's on the download page) before flashing, to make sure your download is not corrupt.
Click to expand...
Click to collapse
ok so i downloaded the file and opened it .rar archiver to check the file and has a .tar.md5 file and .dll file.
ODIN wont recognize a .zip though and i get a file is invalid.
im gonna try the other method you mentioned.

[6.0][OFFICIAL]Indian SOAK OTA zip captured + TWRP backup + Root[XT1068][retail]

all credits to @forus90 , THANK YOU!
DISCLAIMER
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you. Hard. A lot.
*/
This rom is for retail dualsim version of XT1068 [retaildsdsall]
Installing method same as here: http://forum.xda-developers.com/moto-g-2014/general/official-lollipop-indian-ota-captured-t3002674
OTA ZIP Google Drive
OTA ZIP Mega
OTA ZIP Dev-Host @salkollizz
OTA ZIP Mediafire @salkollizz
md5 ffb5e77611928a3638277f23814f1e8e @Kramar111
TWRP BACKUP
If you don't know how to restore it, check out this guide.
So to everyone here. After updating to 6.0 I don't think it's a good idea to downgrade to 5.0.2 and update it with stagefright update over the air.
I made it and it hardbricked my phone.
5.0.2 bootloader version is 48.83
6.0 bootloader version is 48.86
So, don't downgrade your bootloader, it can cause hardbrick!
How to Root
Don't flash SuperSU from recovery, it will cause bootloop!
1. Connect your phone in Bootloader mode to PC
2. Download the modified boot.img.
3. Run the ROOT.bat file
4. Reboot your phone
5. Flash SuperSU V2.52 from TWRP
6. Enjoy
thanks to @mandar91 for the video
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Not working too, cant share with google drive???
Should have put SOAK in the title, lol.
Anyway, thanks for uploading a mirror.
Also, have you installed it?
ForgottenDude said:
Should have put SOAK in the title, lol.
Anyway, thanks for uploading a mirror.
Also, have you installed it?
Click to expand...
Click to collapse
Yes I have, will add google drive link.
Says update cancelled after reboot, maybe because I was rooted before. I will try to flash stock 5.0.2 and then try to update again. I will report...
@zman01, can you add this to the OP:
http://forum.xda-developers.com/showpost.php?p=64942999&postcount=68
My build number is 22.99-16.3
Does it update if I download soak and try to flash it? Soak build number is 24.X im not sure if that is even a problem
maximuns said:
My build number is 22.99-16.3
Does it update if I download soak and try to flash it? Soak build number is 24.X im not sure if that is even a problem
Click to expand...
Click to collapse
Check your system version. It needs to be "22.56.3_retaildsds.retaildsdsall.en.03 retin"
ForgottenDude said:
Check your system version. It needs to be "22.56.3_retaildsds.retaildsdsall.en.03 retin"
Click to expand...
Click to collapse
it is reteu, im in europe, will it work?
Dropbox link not work (ERROR 404)
maximuns said:
it is reteu, im in europe, will it work?
Click to expand...
Click to collapse
Ahh, I don't know about that man. Perhaps someone from EU will flash and let you know!
---------- Post added at 05:54 PM ---------- Previous post was at 05:53 PM ----------
eta82 said:
Dropbox link not work (ERROR 404)
Click to expand...
Click to collapse
Use torrent link, it's working!
PLEASE someone from EUROPE who flashed SOAK report the result
maximuns said:
PLEASE someone from EUROPE who flashed SOAK report the result
Click to expand...
Click to collapse
Flashing it right now... so far so good. I'm at the "installing system update" screen.
Flashing! Thank you so much OP
vladpogo said:
Flashing it right now... so far so good. I'm at the "installing system update" screen.
Click to expand...
Click to collapse
Ok thats seems good, can you report when it is done? thanks
vladpogo said:
Flashing it right now... so far so good. I'm at the "installing system update" screen.
Click to expand...
Click to collapse
Gaulent said:
Flashing! Thank you so much OP
Click to expand...
Click to collapse
Both of you please report back after that!
vladpogo said:
Flashing it right now... so far so good. I'm at the "installing system update" screen.
Click to expand...
Click to collapse
did you install LP XT1068_TITAN_RETAILDSDS_5.0.2_LXB22.99 before installing update ? i have german version and the update failed to install,
i will download XT1068_TITAN_RETAILDSDS_5.0.2_LXB22 rom and try again
walidham said:
did you install LP XT1068_TITAN_RETAILDSDS_5.0.2_LXB22.99 before installing update ? i have german version and the update failed to install,
i will download XT1068_TITAN_RETAILDSDS_5.0.2_LXB22 rom and try again
Click to expand...
Click to collapse
I have updated from XT1068 5.0.2 LXB22.99-16.3 RETDSDS. Right now android is optimising my apps )
maximuns said:
My build number is 22.99-16.3
Does it update if I download soak and try to flash it? Soak build number is 24.X im not sure if that is even a problem
Click to expand...
Click to collapse
Works with retdsall 22.99.16.3 from here https://mega.nz/#F!29RX1L6I!gfxcXgqkAhf5GDhr_aPGYg!m5xmEZpA
vladpogo said:
I have updated from XT1068 5.0.2 LXB22.99-16.3 RETDSDS. Right now android is optimising my apps )
Click to expand...
Click to collapse
ok report good news pls!
Indian Users, Please make a TWRP Nandroid Backup. It will be great ease and Help.

[Tutorial] MEIZU MX5 BL UNLOCK!

sorry.my english is poor.
I'm not responsible for any damage, bootloop, bricked or broken handsets.
pictures
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
1.backup your things.
2.root you phone
3.install supersu from http://forum.xda-developers.com/showthread.php?t=1538053 by chainfire
4.install flashfire from http://forum.xda-developers.com/general/paid-software/flashfire-t3075433 by chainfire
5.download Unlocked BL flashable zip from http://forum.xda-developers.com/meizu-mx/general/recovery-twrp-3-0-meizu-pro5-t3349888 by faust93
6.use flashfire to flash it.
JUST FOR THE PHONE.NOT WORK FOR FASTBOOT.
if you do not konw thether you unlocked,
just flash it again. if what you see is as same as the video.you did it.
https://pan.baidu.com/s/1c2JWrSW
then you can use flashfire flash recovvery.img,like this.
https://pan.baidu.com/s/1eSuPDNO
enjoy it
OOOh !!!!!
Really ???
Very Good News
One Developper can Go to develop Recovery and Custom Rom : MIUI, Cyanogenmod , etc ...
What you use ? Flash Zip or OTA ? Mount /System read/Whrite ? i have use this for flash bl unlocker ....
How can i see if my bootloader is unlocked after Flash with Flashfire ????
my meizu is ok after reboot but i don't see any info on my bootloader if is unlocked or not ....
Renaf2 said:
OOOh !!!!!
Really ???
Very Good News
One Developper can Go to develop Recovery and Custom Rom : MIUI, Cyanogenmod , etc ...
What you use ? Flash Zip or OTA ? Mount /System read/Whrite ? i have use this for flash bl unlocker ....
How can i see if my bootloader is unlocked after Flash with Flashfire ????
my meizu is ok after reboot but i don't see any info on my bootloader if is unlocked or not ....
Click to expand...
Click to collapse
just flash it again. if what you see is as same as the picture.you did it.
https://pan.baidu.com/s/1c2JWrSW
then you can use flashfire flash recovvery.img,like this.
https://pan.baidu.com/s/1eSuPDNO
I try it again and it work
Script succeeded : result was [Done.]
And no problem here reboot : ok and phone work : ok
Thank you very much
Renaf2 said:
I try it again and it work
Thank you very much
Click to expand...
Click to collapse
A lot of custom roms is coming
tzzzz said:
A lot of custom roms is coming
Click to expand...
Click to collapse
I'm so excited ....
i'm not a developper i have try to build cyanogenmod on Note 3 neo but it's to hard for my knowledge (i try that with source and i have create directories , etc but it's very hard without developpement training
Are you a Developper of Custom Rom ?
Test this
Please test this someone with pc And fastboot
laorynas said:
Please test this someone with pc And fastboot
Click to expand...
Click to collapse
Really ???!!!!!!!
If you read the first post it's writing black on white " NOT WORK ON FASTBOOT "
OMG
Renaf2 said:
Really ???!!!!!!!
If you read the first post it's writing black on white " NOT WORK ON FASTBOOT "
OMG
Click to expand...
Click to collapse
Sorry didn't seen that
i have ever made some roms recovery and kernel for samsung other phones,but i have not post it in foreign forum.
sorry i don not have so much time for this. i have to study.examination in china is very important(ㅎ.ㅎ)
I am a Chinese?My Meizu MX5 is using the latest version of the firmware?Why does it feel to brush into this useless
EDIT: I used Flash ZIP or OTA (the other option didn't worked), phone restarted everything is the same and stable (so I suppose it worked.
But can anyone give some detailed info about how to flash this? There are multiple options in flashfire, maybe a vide on youtube so everyone can see it?
thx
killerbie said:
EDIT: I used Flash ZIP or OTA (the other option didn't worked), phone restarted everything is the same and stable (so I suppose it worked.
But can anyone give some detailed info about how to flash this? There are multiple options in flashfire, maybe a vide on youtube so everyone can see it?
thx
Click to expand...
Click to collapse
and so? Does it work? right? Unlock success? recovery can be used?
Xiao Shan said:
and so? Does it work? right? Unlock success? recovery can be used?
Click to expand...
Click to collapse
Yes it works, but I haven't installed a custom recovery yet. No need for as long as there is no good custom rom in my opinion. I'm actually really hoping developers can cook a nice working android 7 rom in the coming weeks.
Yes you can flash this with zip or ota in flashfire
No change in option for flash
If you see : succeeded [Done] like the picture on first post it's ok
For me it's work on second flash
I waiting a custom recovery and good custom rom...
---------- Post added at 04:33 AM ---------- Previous post was at 04:31 AM ----------
tzzzz said:
i have ever made some roms recovery and kernel for samsung other phones,but i have not post it in foreign forum.
sorry i don not have so much time for this. i have to study.examination in china is very important(ㅎ.ㅎ)
Click to expand...
Click to collapse
It's ok your study is much more important than compilation :fingers-crossed: Good luck
killerbie said:
Yes it works, but I haven't installed a custom recovery yet. No need for as long as there is no good custom rom in my opinion. I'm actually really hoping developers can cook a nice working android 7 rom in the coming weeks.
Click to expand...
Click to collapse
Yes, there will be a custom ROM, only a matter of time, take a look CM14 bar. But I still want to know whether the recovery can be used?
do you sure it is working?i have making a recovery. but flashing it not working
You unlock operation was done on AOSP?
What?! No on flyme latest firmware. I HAVE DOWNLOADED the recovery it is ready but I don't now a way to check for 100% if it had worked so I don't want to flash it until there is a video or good custom rom. I don't have the cash to take a risk of brick in my phone
tzzzz said:
i have ever made some roms recovery and kernel for samsung other phones,but i have not post it in foreign forum.
sorry i don not have so much time for this. i have to study.examination in china is very important(ㅎ.ㅎ)
Click to expand...
Click to collapse
Not so long ago I built a cwm for MX5. Try this as a custom recovery http://forum.xda-developers.com/meizu-mx/general/recovery-meizu-mx5-t3306177

Qualcomm Crash Dump Mode

can't do anything
i reboot it go into fastboot
but then what ?? what i do ??
Please help
thanks
What did you do? What were you trying to do before this happend? Installing a ROM, etc?
I would likely use the Fastboot ROMs at this point. (link)
What did you do? What were you trying to do before this happend? Installing a ROM, etc?
I would likely use the Fastboot ROMs at this point. (link)
OhioYJ said:
What did you do? What were you trying to do before this happend? Installing a ROM, etc?
I would likely use the Fastboot ROMs at this point. (link)
Click to expand...
Click to collapse
i don't know what happen i tried to install rom it was o2 beta
how can i go to the global one where it has everything
i was trying to update it while keeping my root but i did something stupid i rebooted the device before it finishs, so it happened
now i am trying to go back to the global rom stock i can't
thanks a lot
OhioYJ said:
What did you do? What were you trying to do before this happend? Installing a ROM, etc?
I would likely use the Fastboot ROMs at this point. (link)
Click to expand...
Click to collapse
now my system on
op6t_O2_Beta_33
bulid number : A6013_41_200103
i want to go to the global one where all languages
how can I do it ?
Truly i have no idea what I've done but when I install the new system it shows like this some languages not recognize
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
yahaa08 said:
Truly i have no idea what I've done but when I install the new system it shows like this some languages not recognize
Click to expand...
Click to collapse
seems like reserve.img partition is not properly flashed.
do u use fastboot or recovery? i think this problem occur if you using recovery.
if root, you can flash reserve.img in magisk, font will fixed
lockmunk said:
seems like reserve.img partition is not properly flashed.
do u use fastboot or recovery? i think this problem occur if you using recovery.
if root, you can flash reserve.img in magisk, font will fixed
Click to expand...
Click to collapse
the problem is i have no idea what's I am doing :laugh:
now I installed the last 10.3.1 ox
but still no Arabic language
now I am trying to root it again
yahaa08 said:
the problem is i have no idea what's I am doing :laugh:
now I installed the last 10.3.1 ox
but still no Arabic language
now I am trying to root it again
Click to expand...
Click to collapse
i use this file to flash in magisk
https://androidfilehost.com/?fid=1899786940962618515
yahaa08 said:
the problem is i have no idea what's I am doing :laugh:
now I installed the last 10.3.1 ox
but still no Arabic language
now I am trying to root it again
Click to expand...
Click to collapse
Reflash your OOS ROM with 'local update' feature, like if it was a regular ROM update.
It will restore all those partitions needed for language and emji's
Best to do that than flash an .img file found on the net
Use the Man download tool, just read instructions and you'll be fine, worked for me several times. It's in the Guides forum.
Striatum_bdr said:
Reflash your OOS ROM with 'local update' feature, like if it was a regular ROM update.
It will restore all those partitions needed for language and emji's
Best to do that than flash an .img file found on the net
Click to expand...
Click to collapse
pandollar said:
Use the Man download tool, just read instructions and you'll be fine, worked for me several times. It's in the Guides forum.
Click to expand...
Click to collapse
thanks a lot, I didn't know that Android is kinda complicated
the original ROM that comes with the phone where can I download it? ( i looked the op site couldn't find it ) because I've download one it was for O2 UK
I don't understand yet, maybe i am more an IOS guy.
I want to format it and restore to the original rom came with the device.
Like I said, use Msm download tool. It will install global ROM and also format to new, and after that you can update.
pandollar said:
Like I said, use Msm download tool. It will install global ROM and also format to new, and after that you can update.
Click to expand...
Click to collapse
could you please provide the link so i can download it?
i couldn't find the tool it refers me to Microsoft tool.
thanks a lot
Here you go
https://forum.xda-developers.com/oneplus-6t/how-to/tool-6t-msmdownloadtool-v4-0-oos-9-0-5-t3867448
pandollar said:
Here you go
https://forum.xda-developers.com/oneplus-6t/how-to/tool-6t-msmdownloadtool-v4-0-oos-9-0-5-t3867448
Click to expand...
Click to collapse
thanks a lot but i think the link is something wrong with it
the 1st one too long on searching
Download
6T_MsmDownloadTool_v4.0.59_OOS_v9.0.13.rar
for the OnePlus OnePlus 6T, by iaTa
Standby...
Searching for mirrors...
the drive
Download
QUD.WIN.1.1 Installer-10037.3 Setup.zip
for the OnePlus OnePlus 6T, by Dark Nightmare
OOPS!
no mirrors found.
Sorry, not sure what you mean. Just download the 1st zip file, works fine just tried it.
pandollar said:
Sorry, not sure what you mean. Just download the 1st zip file, works fine just tried it.
Click to expand...
Click to collapse
i meant the links are down deleted i guess :good:
Downloads fine for me, not sure what your problem is.
pandollar said:
Downloads fine for me, not sure what your problem is.
Click to expand...
Click to collapse
Really !when i saw you'r comment i've tried and it's working :fingers-crossed::good:
before i think the links were down or something wrong with it.
thanks i've download the 1st one
and the driver
so i just connect it and run it ? simple as that ?

Categories

Resources