Database Users

A quick tutorial on how to flash the new Rotohammer roms (these have no bootstraps)

Ok here is a simple tutorial for any new to this tab stuff like I was yesterday.
I take no credit for this just wanted to help compile an easy solution.
It is so simple once you figure it out.
First download Odin v1.7 here unzip it and stick it on your desktop,
http://forum.xda-developers.com/attachment.php?attachmentid=478059&d=1293895557
Then download these files.
http://files.deodexed.com/ModADroid-Galaxy-Tablet/Rotohammer/JME/
These zips need to be unpackaged to get to the .tar files. Pay attention as Winrar will see .tar as a .zip too. (read the file extensions or you can't select them in Odin.) Stick the 3 files (pit, modem,FmInsSD) into a folder on your desktop. (You no longer use the "Jme-hidden" file shown in the pic.)
Attach your tab to your computer, if you have windows 7 the drivers will be installed for you. If you don't you'll need to get them from here.
http://downloadcenter.samsung.com/c...G_USB_Driver_for_Mobile_Phones_v1.3.350.0.exe
launch Odin v1.7(if you get an error about some missing .dll file then you need to install the Microsoft .Net framework)
It should look like this once configured correctly:
MAKE SURE BEFORE YOU ADD YOUR FILES-THE TAB IS PLUGGED IN-YOU WILL HAVE A YELLOW COM BOX CIRCLED IN THE PIC IF IT IS CORRECTLY CONNECTED AND READY TO FLASH.
ALSO YOU MUST HAVE A BIG TRANGLE ON YOUR TAB WITH A DIGGING ANDROID (to do this power up the tab while holding down the down volume button)
Looks like this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LOAD THE FILES AS SHOWN IN THE PIC THEY ARE CIRCLED IN RED
MAKE SURE REPARTITION IS CHECKED THE OTHER BOXES ARE CHECKED BY DEFAULT-LEAVE THEM HOW THEY ARE.
ONLY IF YOU HAVE EVERYTHING DONE. (DOUBLE CHECK)
HIT START
Do not touch anything or use your computer it takes about 5 mins to reboot your tab to the kies sync screen.
your done enjoy!
HIT ME SOME THANKS IF THIS WORKED FOR YOU.

Nice work.
You might want to specify that this is for gsm only as many may not be aware.
I on sprint so I guess I have to wait but it's good too see this kind of work being put out there.
Thanks

Back To Stock
Can someone just list the settings in odin to flash the T-mobile stock I want to get back asap tried to flash from pda and got error do you need to re-partition Please give me a hand??

JeffR714 said:
Can someone just list the settings in odin to flash the T-mobile stock I want to get back asap tried to flash from pda and got error do you need to re-partition Please give me a hand??
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=855851
no repartition no pit file just pda and modem.

Thanks for the tutorial ianandamy,
Where did you get the jme-hidden.tar? I found the hidden.pit from your link but no hidden.tar.
Oh...and what is the difference between v1 and v2?

Hi Guys,
I'm from austria and have only one question: since i have flashed my tab to jm6 and higher, the bootloader is protected and it's not possible to go back to stock (in my case: hutchinson 3g austria).
now i have flashed to roto's jme, it work very fine! but he's writing, that's possible to go back to t-mobile stock (usa), no matter the bootloader was signed (protected) before flashing or not.
is there also a way to go back to others stock arround the world??? or is it only possible for t-mobile usa-users? thanks a lot!

Lucky_Charms said:
Thanks for the tutorial ianandamy,
Where did you get the jme-hidden.tar? I found the hidden.pit from your link but no hidden.tar.
Oh...and what is the difference between v1 and v2?
Click to expand...
Click to collapse
Same question here. What does JME-hidden.tar do? Do we need it? It's not in the link you provided (but all other files are).

naddie said:
Same question here. What does JME-hidden.tar do? Do we need it? It's not in the link you provided (but all other files are).
Click to expand...
Click to collapse
I think he edited it out it was the add on apks included in the stock rom you don't need it it is 2 samsung apps

Thanks for the info ianandamy, I'm running jj3 with kies pushing no updates, if I run this will I receive updates if and when they're pushed my way?

gillebob said:
Thanks for the info ianandamy, I'm running jj3 with kies pushing no updates, if I run this will I receive updates if and when they're pushed my way?
Click to expand...
Click to collapse
Real sure about that

Lucky_Charms said:
Thanks for the tutorial ianandamy,
Where did you get the jme-hidden.tar? I found the hidden.pit from your link but no hidden.tar.
Oh...and what is the difference between v1 and v2?
Click to expand...
Click to collapse
I update the first post of the firmware thread with all the changes.

gillebob said:
Thanks for the info ianandamy, I'm running jj3 with kies pushing no updates, if I run this will I receive updates if and when they're pushed my way?
Click to expand...
Click to collapse
I doubt it. You either flash custom firmware and enjoy it, or sit in front of your computer hoping/waiting for Kies to update you
I think XDA has provided way more updates than Kies so far.

sorry, i am not able to find the CMC file, where can i download it ?

rotohammer said:
I doubt it. You either flash custom firmware and enjoy it, or sit in front of your computer hoping/waiting for Kies to update you
I think XDA has provided way more updates than Kies so far.
Click to expand...
Click to collapse
+1 to Roto's answer. Kies reads your firmware version when you connect the Tab and will only offer you an update if it recognises that there is an upgrade available for the firmware it sees on your Tab. This generally means that if you have flashed pre-release firmware which has development / test codes it won't offer you any of the official production upgrades (or any upgrades usually!). It is possible to fake your Tab's signature in Kies to make it flash official releases over dev/test firmware, do a search on the Samsung Galaxy S forums for how to do this.

Don't think so. So far kies have give me 2 updates. It work amazingly. Now is smother. Just my opinion.
Sent from my GT-P1000 using XDA App

zakwak said:
sorry, i am not able to find the CMC file, where can i download it ?
Click to expand...
Click to collapse
+1 I also cannot find the Addon-JME-Hidden.tar

it tried it without it and it works

I am new on the Android OS, Will this ROM enable the voice call feature?
I am getting a new ATT Tab and want to use my existing SIM.

ready to go?
Hi,
I want to flash, and have configured like following screenshot
I have actually rooted, stockrom
Can I start with these settings?
Thx & Regards,
Kangaroo

kangaroo72 said:
Hi,
I want to flash, and have configured like following screenshot
I have actually rooted, stockrom
Can I start with these settings?
Thx & Regards,
Kangaroo
Click to expand...
Click to collapse
Me too , i have same options i can t found CSC hidden.tar....what i have to do?
What file i have to put on CSC?

[Nandroid Backup] XXDLH6 Jelly Bean 4.1.1

Read instructions before ask silly questions!
This is the latest Jelly Bean Leak - XXDLH6.
Lots of the users couldn't install the OTA, so here's the full version.
How to install:
Extract the zip in SDCard --> clockworkmod --> folder (for example JB) --> files here
Go to CWM --> Backup & Restore --> Restore from internal storage
The ROM is NOT rooted.
You should root it yourself.
Enjoy
Google Drive download: https://docs.google.com/open?id=0B03kuDevWNTFUkgzY2hPWDZQYm8
Multiupload download: http://www.multiupload.nl/D958B28I97
Please say thanks If this helped you!
I recommend you to wipe dalvik cache, battery stats & cache partition before you run the rom (for best smoothness and no FC)
If for some reason you can't find clockworkmod folder (to restore the backup), make a new backup and then replace the files from your backup with the files from the ZIP I provided.
MD5 checksum mismatch only happens when you try to install the whole zip file which is wrong! Extract like it's stated in the instructions.
You can restore this backup over every rom you want.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Credits: Samsung-Updates.com

could you share XXDLH6' modem.bin also please?
thanks.

Having a problem on the link
Edit: Nevermind . Silly me

Repulsa said:
Having a problem on the link
Click to expand...
Click to collapse
Link is working.

radeonxt said:
could you share XXDLH6' modem.bin also please?
thanks.
Click to expand...
Click to collapse
I've just tried to extract it and get some ridiculous sizes sort of 76 MB (second time was 114). So probably I'm making mistake somewhere.
Let's wait for CyanogenMod Team to release the modem.

support chinese language ?
THX

To root this after doing the nandroid backup, I should use CF-Root for SGS3 v6.4 and flash using desktop odin?

dereknas said:
To root this after doing the nandroid backup, I should use CF-Root for SGS3 v6.4 and flash using desktop odin?
Click to expand...
Click to collapse
I don't know how many times this have been repeated. Yes!

dereknas said:
To root this after doing the nandroid backup, I should use CF-Root for SGS3 v6.4 and flash using desktop odin?
Click to expand...
Click to collapse
Yes

yangkwong said:
support chinese language ?
THX
Click to expand...
Click to collapse
The last language is with some symbols - looks like chinese or japanese (I don't make difference sorry). I'm not sure.

Jack Barrett said:
The last language is with some symbols - looks like chinese or japanese (I don't make difference sorry). I'm not sure.
Click to expand...
Click to collapse
OK, let me try it

thanks man...the other download was damn slow.!!!

Can somebody confirm it's working? WiFi issues?

very sad to say......no chinese language support:crying:
---------- Post added at 05:33 PM ---------- Previous post was at 05:28 PM ----------
Jack Barrett said:
Can somebody confirm it's working? WiFi issues?
Click to expand...
Click to collapse
no problem for wifi.....

yangkwong said:
very sad to say......no chinese language support:crying:
---------- Post added at 05:33 PM ---------- Previous post was at 05:28 PM ----------
no problem for wifi.....
Click to expand...
Click to collapse
Don't worry. 1 more week until we get the final official version.:laugh:

can this be flashed on the latest I9300XXBLH1_I9300ODDBLG2_INU ?

Jack Barrett said:
Don't worry. 1 more week until we get the final official version.:laugh:
Click to expand...
Click to collapse
I hope so.....
---------- Post added at 05:39 PM ---------- Previous post was at 05:38 PM ----------
lastword112 said:
can this be flashed on the latest I9300XXBLH1_I9300ODDBLG2_INU ?
Click to expand...
Click to collapse
Any kind of firmware, use CWM recovery:good:

lastword112 said:
can this be flashed on the latest I9300XXBLH1_I9300ODDBLG2_INU ?
Click to expand...
Click to collapse
Questions like this are answered in the first post. People who don't read make me sick.

Jack Barrett said:
Questions like this are answered in the first post. People who don't read make me sick.
Click to expand...
Click to collapse
couldn't of said it better

pls can someone make a flashable XP of the new modem pls thanks
Sent from my GT-I9300 using xda premium

TAR files to flash MF3 via ODIN

I had another thread for this, but I figured it would be good to repost it since I didn't know what I had stumbled upon at first.
For all of those who have soft bricked their phones, I present to you to the MF3 TAR files to flash it back to stock via ODIN.
https://mega.co.nz/#!WEEzSA7Z!aB46731_AwM7P83eMdDlmFYd1hUZfFBcQAZjc1X7wAE
And for those that aren't sure as to where to put the files when flashing via ODIN, while it should be obvious, I have attached a picture that @xrandallx posted to help those that need it.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I[/IMG]

Sticky????

The Mega site isnt working, the download keeps on stopping randomly.

nabears101 said:
The Mega site isnt working, the download keeps on stopping randomly.
Click to expand...
Click to collapse
It's known issue with MEGA, it works best if your using Firefox or Chrome. If the download keeps freezing keep reloading it will eventually work...
Once somebody can grab the files I suggest they be uploaded to several locations, and perhaps a torrent file.
---Edit---
Maybe a mod can edit the title to include something like [Release]? As is stands now people might miss the thread by thinking it's a question being asked.

Shockndrop said:
I had another thread for this, but I figured it would be good to repost it since I didn't know what I had stumbled upon at first.
For all of those who have soft bricked their phones, I present to you to the MF3 TAR files to flash it back to stock via ODIN.
https://mega.co.nz/#!WEEzSA7Z!aB46731_AwM7P83eMdDlmFYd1hUZfFBcQAZjc1X7wAE
And for those that aren't sure as to where to put the files when flashing via ODIN, while it should be obvious, I have attached a picture that @xrandallx posted to help those that need it.
I[/IMG]
Click to expand...
Click to collapse
AWESOME, simply fantastic! It seems that the picture has been moved, however. Any chance we can get a re-up?
EDIT: The only reason I'm asking is because I have been on MF3 since I purchased my phone. I assume, that if anything happens, I can use the existing guides for MDL, and just replace the files with MF3, right...?

rayburne said:
Sticky????
Click to expand...
Click to collapse
Yes firefox and try the mega mobile app if you don't have it already.use in combo
Sent from my SAMSUNG-SGH-I337 using xda app-developers app

attached is the picture
FrozenDragoon said:
AWESOME, simply fantastic! It seems that the picture has been moved, however. Any chance we can get a re-up?
EDIT: The only reason I'm asking is because I have been on MF3 since I purchased my phone. I assume, that if anything happens, I can use the existing guides for MDL, and just replace the files with MF3, right...?
Click to expand...
Click to collapse

FrozenDragoon said:
AWESOME, simply fantastic! It seems that the picture has been moved, however. Any chance we can get a re-up?
EDIT: The only reason I'm asking is because I have been on MF3 since I purchased my phone. I assume, that if anything happens, I can use the existing guides for MDL, and just replace the files with MF3, right...?
Click to expand...
Click to collapse
The files are pretty self explanatory. Platform in PDA, modem in Phone, csc in csc, bootloader in bootloader. Only have auto-reboot checked. Ignore the dll file.
Edit, even better ^^^, haha posted while I was typing :good:

FrozenDragoon said:
The only reason I'm asking is because I have been on MF3 since I purchased my phone. I assume, that if anything happens, I can use the existing guides for MDL, and just replace the files with MF3, right...?
Click to expand...
Click to collapse
No, if you on MF3 and attempt to load any firmware below it such as MDL you'll end up with a brick (which this will fix, grant it). This has more use for people brick their MF3 devices using MF3-based firmwares.
Don't mind me, I misread your post... - Thanks for clearing that up @jd1639.

NighthawkXL said:
No, if you on MF3 and attempt to load any firmware below it such as MDL you'll end up with a brick (which this will fix, grant it). This has more use for people brick their MF3 devices using MF3-based firmwares.
Click to expand...
Click to collapse
You won't end up with a brick and the Odin guide for mdl firmware will work just fine. It's a guide. If you don't know what you're talking about don't post

worked perfectly. trading this phone for an lg. I'm on windows 8.1 pro 64bit and used odin v1.85

This worked great for me as well. The only issue I have is when I first boot up my phone, it hangs in the middle of the AT&T logo until I pull the battery then it boots fine. That only happened in the first boot after odin and first boot after doing a factory restore.

recovery
so, with this MF3 image, are we that much closer to a custom CWM or TWRP for i337 MF3s?
wasting away in safestrap land

Deamonicone said:
so, with this MF3 image, are we that much closer to a custom CWM or TWRP for i337 MF3s?
wasting away in safestrap land
Click to expand...
Click to collapse
Hate to burst your bubble, but this doesn't seem like the case. Although we have access to the TAR files now the fact is the MF3 bootloader remains locked. Unless we can convince AT&T or Samsung to hand over the keys it's going to be a long wait (if ever) before we find a means to circumvent it's encryption.

What about us Mac users. Will Heimdall work with this?

mf3 tars
I have to say u are a life saver! I thought my phone was bricked for sure. thanks

Can someone please re upload this, MEGA keeps stopping in middle of downloading.

kyrumo71 said:
Can someone please re upload this, MEGA keeps stopping in middle of downloading.
Click to expand...
Click to collapse
I will try uploading it to dev-host and then let Shockndrop add it to his OP if he wants. It may take a long time to upload as I an being throttled on my data right now and my WiFi is not much better. Plus I couldn't get dev-host to upload yesterday. Will let everyone know once it is uploaded.
Sent From My Spiderman,Ironman,Red,Dark Blue,Green, GreyedOut BadAss Themed I337

To everyone using Mega, I thought it was crapping out in the middle too, until I realize that Chrome wanted to ask permission to download large files. After I allowed that permission, everything works fine.

Works perfectly! Thanks a lot! Had been waiting for this from long time! :good:

HELP!

I rooted my S4 SGH-1337 AT&T and then put safestrap on to flash custom ROMS. it was working good until i decided to flash another rom. We'll i flashed a bad one and it bricked my phone. I tried ging to the stock rom using safestrap but it just stops at the AT&T logo. I need help with this. do i need to unroot my phone to fix this or is there another method. Im a noob here so please help guys!

skateman274 said:
I rooted my S4 SGH-1337 AT&T and then put safestrap on to flash custom ROMS. it was working good until i decided to flash another rom. We'll i flashed a bad one and it bricked my phone. I tried ging to the stock rom using safestrap but it just stops at the AT&T logo. I need help with this. do i need to unroot my phone to fix this or is there another method. Im a noob here so please help guys!
Click to expand...
Click to collapse
Your best bet is to start over by flashing the stock MF3 files using ODIN. From there, re-root your phone, reinstall SafeStrap, and try again. You most likely flashed a non-TW based ROM... remember only TW roms work with SS right now.
If you have any other questions, I'll try to explain it in more detail.

NighthawkXL said:
Your best bet is to start over by flashing the stock MF3 files using ODIN. From there, re-root your phone, reinstall SafeStrap, and try again. You most likely flashed a non-TW based ROM... remember only TW roms work with SS right now.
If you have any other questions, I'll try to explain it in more detail.
Click to expand...
Click to collapse
Can you take me through the steps to flash the files in ODIN?

skateman274 said:
Can you take me through the steps to flash the files in ODIN?
Click to expand...
Click to collapse
First off, download ODIN 1.85 it seems to be the one that most people have the best luck with.
Grab the MF3 TAR files
Extract the MF3 files to a folder, say on your desktop. ie. MF3
Open ODIN and refer to this picture...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
For more information about how to use ODIN you can refer to here, and here.
I've personally never had to use it, so my steps are only from general observation. You might want to double check yourself. So if anyone has has any other info to help him feel free to post.

NighthawkXL said:
First off, download ODIN 1.85 it seems to be the one that most people have the best luck with.
Grab the MF3 TAR files
Extract the MF3 files to a folder, say on your desktop. ie. MF3
Open ODIN and refer to this picture...
For more information about how to use ODIN you can refer to here, and here.
I've personally never had to use it, so my steps are only from general observation. You might want to double check yourself. So if anyone has has any other info to help him feel free to post.
Click to expand...
Click to collapse
What you have here looks good. I use Odin every once in awhile just so I remember how to use it.

NighthawkXL said:
First off, download ODIN 1.85 it seems to be the one that most people have the best luck with.
Grab the MF3 TAR files
Extract the MF3 files to a folder, say on your desktop. ie. MF3
Open ODIN and refer to this picture...
For more information about how to use ODIN you can refer to here, and here.
I've personally never had to use it, so my steps are only from general observation. You might want to double check yourself. So if anyone has has any other info to help him feel free to post.
Click to expand...
Click to collapse
ODIN becomes unresponsive when I hit start. I read you have to disable kies? do you know how to do that? thanks for the resposes though!

skateman274 said:
ODIN becomes unresponsive when I hit start. I read you have to disable kies? do you know how to do that? thanks for the resposes though!
Click to expand...
Click to collapse
Uninstall it. You'll find kies is pretty useless anyway.

I got it thanks a bench man!!
Sent from my SAMSUNG-SGH-I337 using xda app-developers app

skateman274 said:
I got it thanks a bench man!!
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
Glad to be of a service, here's to your future endeavors with your S4.

NighthawkXL said:
Glad to be of a service, here's to your future endeavors with your S4.
Click to expand...
Click to collapse
you da man, Nighthawk.....good job sir...more patience than me for sure, nice of you to help.

[ROOT-FLASHABLE] Lollipop [UPDATE]

Lollipop Update for rooted Moto Es. This is the final update package as no changes have been made to the ROM by Motorola after the soak test.​This is the Lollipop update for rooted XT1021s, XT1022s and XT1023s.Download links below. Please read the notes carefully before you do anything. Credits to the people who uploaded the soak OTA.
---------------------------------------
Read this carefully.
This update is only for the XT1022 running stock firmware and not CM11.
Make sure that you haven't modified anything inside the internal (system) partitions or removed any packaged apps. If you have done so, undo those changes or customize the package as per the instructions given at the end.
This ROM has been tested by more than 1000 users and is working. Of something fails, that's because you messed it up, not the ROM.
Place the ZIP on your SD card, boot up your custom recovery and flash (I think that this is self-explanatory). (You may also side-load).
I suggest that you uninstall Link2SD and then reinstall it after you update, it causes debuggerd issues.
---------------------------------------
Download link: http://filestorm.cf/rM.
DevHost: XT1022_root-flashable-update-5.0.2_signed.zip - 341.40 MB
---------------------------------------
Use TWRP, here. Thanks to @gaurav2009 for pointing this out.
Do not use a deodexed/modified/debloated ROM. Use this ROM. Thanks again to @gaurav2009 and @luvk1412 for pointing this out.
---------------------------------------
Customizing the update package
You need a bit of experience to do anything listed below.
TAKE A NANDROID BACKUP!
Flash the ZIP mentioned in this post.
If an error occurs, copy the ZIP to your PC and extract it.
Go to 'extracted_folder/META-INF/com/google/android'
Edit the updater-script and remove the assert, 'apply_patch' and 'apply_patch_check' and 'sha1_check' lines that refer to the files mentioned in the error you saw.
ZIP the folder again (Make sure that you don't change the directory structure).
Download ZipSigner for Windows and sign the package.
Flash the signed ZIP and repeat the procedure for all errors you see.
---------------------------------------
Troubleshooting
Errors with 3c_main/LatinIME/*.apk-Try and find the stock application and install it. That's it.
Errors with debuggerd- Uninstall link2sd. If issues persist, find a stock KitKat debuggerd.
ADB Sideload - device not found- (WINDOWS) Install drivers -> Go to Device Manager -> Find XT1022/Unidentified Device->Update Driver->Select Manually From List->Android Device->Motorola USB Interface->Install it.
Generic Advice- If something errors, restore a stock version. If everything seems too complex, flash back to stock.
---------------------------------------
I've tried my best to make sure that you don't brick your device but as always, you do this at your own risk and please don't hold me responsible. For noobs who can't manage a nandroid backup, go and revert to stock.​---------------------------------------
Post any errors you can't solve here and I'll try and fix them ASAP.

Sure mate. All the best.

tech_master said:
I'm working on a root-flashable Lollipop update. It'd be ready by this evening. I'd be grateful if someone could give me error logs when they try to flash the soak test ZIP. It'd make by job much easier. Cheers and enjoy the sweet new lollipop.
Click to expand...
Click to collapse
Root flashable mean the rom which can b flashed in custom recovery n which is pre rooted
correct me if i'm wrong

akash.mahadeshwar said:
Root flashable mean the rom which can b flashed in custom recovery n which is pre rooted
correct me if i'm wrong
Click to expand...
Click to collapse
Yeah. That's it. Could anyone give me those error logs?

tech_master said:
Yeah. That's it. Could anyone give me those error logs?
Click to expand...
Click to collapse
Yup i'll give it a try to flash your rom n tell you the error if i get any...

tech_master said:
I'm working on a root-flashable Lollipop update. It'd be ready by this evening. I'd be grateful if someone could give me error logs when they try to flash the soak test ZIP. It'd make by job much easier. Cheers and enjoy the sweet new lollipop.
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I tried to sideload via stock recovery and got this error.

tech_master said:
I'm working on a root-flashable Lollipop update. It'd be ready by this evening. I'd be grateful if someone could give me error logs when they try to flash the soak test ZIP. It'd make by job much easier. Cheers and enjoy the sweet new lollipop.
Click to expand...
Click to collapse
so that means, it will work even if we have made some changes in the rom and have custom recovery??
Will this work if I am on CM11 ?? or I have to install the stock rom??

shivamg95 said:
so that means, it will work even if we have made some changes in the rom and have custom recovery??
Will this work if I am on CM11 ?? or I have to install the stock rom??
Click to expand...
Click to collapse
You can't flash stock 5.0.2 files on CM . Either installation will be aborted or you will be in bootloop !

prince.d.emperor said:
You can't flash stock 5.0.2 files on CM . Either installation will be aborted or you will be in bootloop !
Click to expand...
Click to collapse
So we need to flash unmodified stock kikat rom for it??

The update is up!
Just uploaded the update. Refer to the first post.

this filehosting site is very slow,can you upload in another site ?

tech_master said:
Just uploaded the update. Refer to the first post.
Click to expand...
Click to collapse
You have reached the maximum concurrent downloads. Please wait for your existing downloads to complete or register for a premium account above. error given by website any miror
---------- Post added at 04:21 PM ---------- Previous post was at 04:21 PM ----------
raj.amalw said:
I tried to sideload via stock recovery and got this error.
Click to expand...
Click to collapse
get same eror found no solution

@ luvk1412, I'm now mirroring to dev-host. Just a few minutes.

tech_master said:
@ luvk1412, I'm now mirroring to dev-host. Just a few minutes.
Click to expand...
Click to collapse
can you help regarding sideloading eror in the above screenshot
nd how much time it will take to upload
EDIT: no wonder how but the update poped up automatically..doing fingerscrossed

@luvk1412
Just uploaded to DevHost.
XT1022_root-flashable-update-5.0.2_signed.zip - 341.40 MB

Should i unroot before flashing the zip? I have flashed stock rom with no modifications. The thing is it is rooted.

getting an error. " /system/app/ 3c_main.apk(sometimes LatinImeGoogle.apk)" has unexpected contents

I don't think that unrooting is needed. Also, any updates by people who downloaded? The file's been downloaded 25+ times and yet everyone is silent. And yeah, take a backup before you proceed. Now fixing issue reported by @chaithu5.

I have cm11 rom . Can I still flash this ? Or do I need to flash stock rom and then flash ?

tech_master said:
I don't think that unrooting is needed. Also, any updates by people who downloaded? The file's been downloaded 25+ times and yet everyone is silent. And yeah, take a backup before you proceed. Now fixing issue reported by @chaithu5.
Click to expand...
Click to collapse
check out my post http://forum.xda-developers.com/showpost.php?p=58797184&postcount=17