Database Users

[Q] G2 d800 with d802 rom/firmware bad flash

I bought a broken AT&T G2 that the buyer did a bad flash or something with. Doing some playing around on the phone I see that the phone is d800/ AT&T G2, with what to appears to be a d802 firmware in it. Phone turns on and boots up to main screen but touch screen doesn't respond well and it reboots after maybe 1 min or two.
I have tried lg flash tool but get failed because it reads the phone as d802 and the dll/tot file are for the d800 and doesn't give me an option to proceed. Also tried LGMLauncher but doesn't download the software, gets stuck at 11%.
Any other help will be appreciated, if not I'll resell this phone.

iredline5 said:
I bought a broken AT&T G2 that the buyer did a bad flash or something with. Doing some playing around on the phone I see that the phone is d800/ AT&T G2, with what to appears to be a d802 firmware in it. Phone turns on and boots up to main screen but touch screen doesn't respond well and it reboots after maybe 1 min or two.
I have tried lg flash tool but get failed because it reads the phone as d802 and the dll/tot file are for the d800 and doesn't give me an option to proceed. Also tried LGMLauncher but doesn't download the software, gets stuck at 11%.
Any other help will be appreciated, if not I'll resell this phone.
Click to expand...
Click to collapse
try using LGFlashTools 1.5
http://forum.xda-developers.com/showthread.php?t=2432476
in section
RETURN TO STOCK AT&T Version ONLY!
maybe you can describe detail why LGFlashTools fail to flash

bullghost said:
try using LGFlashTools 1.5
http://forum.xda-developers.com/showthread.php?t=2432476
in section
RETURN TO STOCK AT&T Version ONLY!
maybe you can describe detail why LGFlashTools fail to flash
Click to expand...
Click to collapse
Tried that, but it fails due to firmware and phone being different. thanks for the help

same problem need help
im in the same boat i accidentally loaded a d802 rom on a vs980 lg flash tool wont let me flash stock kdz because the phone now says d802 because of the bad rom flash and im stuck because i need to put a vz980 .dll but the program says that i need to use d802 because of the rom i accidentally installed
if anyone can help id be more that grateful im stuck with this brick for now and i dont even have a warranty on my phone so i cant get in replaced :crying::crying:

kenpachiramasam said:
im in the same boat i accidentally loaded a d802 rom on a vs980 lg flash tool wont let me flash stock kdz because the phone now says d802 because of the bad rom flash and im stuck because i need to put a vz980 .dll but the program says that i need to use d802 because of the rom i accidentally installed
if anyone can help id be more that grateful im stuck with this brick for now and i dont even have a warranty on my phone so i cant get in replaced :crying::crying:
Click to expand...
Click to collapse
You can still get into recovery right? You try sideloading a correct rom?
Sent from my LG-D802 using XDA Premium 4 mobile app

x714x said:
You can still get into recovery right? You try sideloading a correct rom?
Sent from my LG-D802 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Unfortunately not. It's in a boot loop and when I hold power and volume down it just goes to
[800] fast lot mode started
[850] udc_start()
And that's all I get can i force it into recovery another way

kenpachiramasam said:
Unfortunately not. It's in a boot loop and when I hold power and volume down it just goes to
[800] fast lot mode started
[850] udc_start()
And that's all I get can i force it into recovery another way
Click to expand...
Click to collapse
then you will need ADB to boot into recovery

ssreynolds said:
then you will need ADB to boot into recovery
Click to expand...
Click to collapse
Going give this a try again. But the issue is if my pc has enough time to sync with the phone before the phone reboots.

I've tried something along those lines but to no avail. My phone doesn't show up on my computer in its current status. How can I get map to recognize my phone I have the drives installed and lg upgrade tool can see it so I know it can kinda see it. When I ran Adb devices nothing comes up on the ASB command prompt

kenpachiramasam said:
im in the same boat i accidentally loaded a d802 rom on a vs980 lg flash tool wont let me flash stock kdz because the phone now says d802 because of the bad rom flash and im stuck because i need to put a vz980 .dll but the program says that i need to use d802 because of the rom i accidentally installed
if anyone can help id be more that grateful im stuck with this brick for now and i dont even have a warranty on my phone so i cant get in replaced :crying::crying:
Click to expand...
Click to collapse
try load d802 dll
you can get it from here
http://forum.xda-developers.com/showthread.php?p=48032783#post48032783
and flash it with vz rom

bullghost said:
try load d802 dll
you can get it from here
http://forum.xda-developers.com/showthread.php?p=48032783#post48032783
and flash it with vz rom
Click to expand...
Click to collapse
don't think that's going to work for my situation but I'll give it a try in a bit. So I would get a d800 rom and load d802 .dll? I think once the program sees the .dll file and the firmware, it will fail.

bullghost said:
try load d802 dll
you can get it from here
http://forum.xda-developers.com/showthread.php?p=48032783#post48032783
and flash it with vz rom
Click to expand...
Click to collapse
Tried that link it takes me to a Chinese website and it has a .zip and .txt the zip has a password and the .txt has a bunch of gibberish and some links couldn't figure it out

kenpachiramasam said:
Tried that link it takes me to a Chinese website and it has a .zip and .txt the zip has a password and the .txt has a bunch of gibberish and some links couldn't figure it out
Click to expand...
Click to collapse
http://121.10.243.135/file/MDAwMDAw...&p=&a=0-c6e4c8a5-48049-0/010166&mode=download
try that, I downloaded with my windows phone. Stupid windows phone doesn't have a file manger so I can't locate the .dll. Dont know if the link works. Can't test the dll and forward till later. Let me k ow if you have any success.

iredline5 said:
http://121.10.243.135/file/MDAwMDAw...&p=&a=0-c6e4c8a5-48049-0/010166&mode=download
try that, I downloaded with my windows phone. Stupid windows phone doesn't have a file manger so I can't locate the .dll. Dont know if the link works. Can't test the dll and forward till later. Let me k ow if you have any success.
Click to expand...
Click to collapse
No luck it redirects me to another site and tells me to sign into to a Chinese website and I haven't been able to find the .dll anywhere

kenpachiramasam said:
No luck it redirects me to another site and tells me to sign into to a Chinese website and I haven't been able to find the .dll anywhere
Click to expand...
Click to collapse
Tried it with the d802 dll file and d800. Still fails for me.
Here is the d802.dll
https://www.dropbox.com/s/77isqnkeuixkj6u/LGD802_20130912_LGFLASHv160.dll

well i tried it and it said i have the wrong bin now -_- guess i cant flash the stock .tot then since the phone actually thinks its a d802 now

kenpachiramasam said:
well i tried it and it said i have the wrong bin now -_- guess i cant flash the stock .tot then since the phone actually thinks its a d802 now
Click to expand...
Click to collapse
i think we need some one to hack the dll or the LGFlashTools to skip TOT checking

Ya if we could get someone to do that then I could get everything to go through. Unfortunately I don't know any one with much programming or coding skills. But thanks for the help so far man. It's nice to know not everyone on the Internet is an asshole

kenpachiramasam said:
Unfortunately not. It's in a boot loop and when I hold power and volume down it just goes to
[800] fast lot mode started
[850] udc_start()
And that's all I get can i force it into recovery another way
Click to expand...
Click to collapse
if you can stay longger in fastboot mode
try flash VZ laf.img
fastboot erase laf
fastboot flash laf laf.img
here how to and tool for fastboot
http://forum.xda-developers.com/showthread.php?t=2477595
i think this partition also the responsible for phone type ex D802 or VZ980 where LGFlashTools use it to detect phone type
laf partition will bring download mode to you

Hahaha tried this one to and the one it links me too. My phone isn't reconized my my computer so doing things throught the PCs CMD is out of the question for me and so is pushing the boot .img via ADB since my phone wasn't In debugging mode when I bricked it. But again thanks man. I think I've exhausted most of the conventional fix it threads on this since I've been looking through everything since Sunday

Att & Spring " Fix boot loop or go back to stock!"

Disclaimer: I'm not responsible if your phone wants to die with this :angel:
Do this at you own risk !!!!!
If this help see how !!!
I only put everything together IF ANYTHING THANKS HIM.....
Original thread
HTML:
http://forum.xda-developers.com/showthread.php?t=2432476
RETURN TO STOCK AT&T & Sprint Version ONLY!
Download
1. LGFlashTools
HTML:
https://docs.google.com/file/d/0B_nizg6yUZ0NYjVBQmlLYkpkZ2c/edit
2. Drivers google it.
Att only for Spring download the zip from the below.
3. Download Both Stock AT&T Image File and DLL (Both Files)
HTML:
http://storagecow.eu/index.php?dir=Xda%2FLG+G2%2FStock%2FAT%26T%2F
Megalock DLL
HTML:
https://docs.google.com/file/d/0B_nizg6yUZ0NZVJmOUcybUpCRlE/edit
Credit to @madmack for making most of this Guide for the G Pro Which also works on our G2
3.1 - FOR SPRINT FIRMWARE " BOTH FILES ARE IN THERE"
HTML:
http://storagecow.eu/index.php?dir=Xda%2FLG+G2%2FStock%2FSprint+LS980%2F
Install
1. Install the LG drivers
2. Install LGFlashTools
3. Extract the TOT\ DLL file from the ZIP and the Megalock DLL and add it to your LGFlashTools folder.
Which is located at the root of the computer.
4. Run the lg tool
5. hit manual and add you files where they belong
6. hit the yellow arrow and all Done !!!
Drivers initialization
1. Put the phone into download mode. (Turn off device PRESS VOL UP while plugging in the micro usb cable. If this doesn't work, try holding both volume keys instead)
2. Let the phone initialize and install the drivers. Once done, in Device manager, you should see the LG phone listed under COM ports (something along these lines).
3. Find that LG entry in Device Manager, click on Properties, Advanced and then change the COM port to COM41 and close/save.
4. Unplug your phone! Important step.
LGFlashTools
Note: you need Megalock DLL file to open LGFlashTools
Flashing
5. There is a yellow arrow on the top left. Click on it to initialize the process. It will reboot and that's it .
6. Put the phone in download mode again, and plug it into the USB port. LG FLash Tools should start flashing it automatically. When it's done, it'll automatically reboot into your stock AT&T rom and all of your data and internal sdcard files are gone.

HELP!
i tried all of this everything is where it should be but it keeps saying download failed device model is different! check phone or DLL! 00000000 i have sprint g2 ls980 its been bricked for a few days now please help.

rhkidaon420 said:
i tried all of this everything is where it should be but it keeps saying download failed device model is different! check phone or DLL! 00000000 i have sprint g2 ls980 its been bricked for a few days now please help.
Click to expand...
Click to collapse
You need the spring download... It should work but you need to set you com to 41... you might have downloaded the att version. It should say lg_ls980 dll and lg ls 980 tot to work

Nicamarcel1 said:
You need the spring download... It should work but you need to set you com to 41... you might have downloaded the att version. It should say lg_ls980 dll and lg ls 980 tot to work
Click to expand...
Click to collapse
nope downloaded the sprint file and the .dll im on com 41 i need to find a way to change my device model name its just G2 when this program is looking for the device to be named lg-ls980.i went to sprint today and tryed to trade it in for a new one or have them fix it he seen that i have twrp on there and said nope cant do anything so if all else fails ill just drop it in water and get it repaired or pay 150 and say its lost or stolen that way i can keep it and have 2

rhkidaon420 said:
nope downloaded the sprint file and the .dll im on com 41 i need to find a way to change my device model name its just G2 when this program is looking for the device to be named lg-ls980.i went to sprint today and tryed to trade it in for a new one or have them fix it he seen that i have twrp on there and said nope cant do anything so if all else fails ill just drop it in water and get it repaired or pay 150 and say its lost or stolen that way i can keep it and have 2
Click to expand...
Click to collapse
There could be many reasons why it didn't work. Just have to be patient and see if you had missed any steps. Have you tried using a different computer? You have the right drivers installed for your carrier? Got into Download Mode with no problems? You have the stock rom and the correct dll files? Seems like you know what you're doing so I suggest try it on a different computer and remember to reboot your system after making any changes/installations of programs or drivers.
I was in a similar situation and panicked and did rush through some steps which luckily I calmed down long enough to realize my mistakes and got a successful flash. Good luck on getting your phone running stock again or able to exchange for a new one.

In the spring.zip file there is the dll file and the tot file make sure you put both file and not use the att dll file. If you got the right one there is others thread that shows how to vome out of boot loop with out having to go back.
Sent from my LG-LS980 using xda premium

rhkidaon420 said:
i tried all of this everything is where it should be but it keeps saying download failed device model is different! check phone or DLL! 00000000 i have sprint g2 ls980 its been bricked for a few days now please help.
Click to expand...
Click to collapse
Has anyone found a solution to this error? I have this problem on my At&T LGD800 as well. Would have thought there'd be a way to force it to install and ignore errors.

http://forum.xda-developers.com/showthread.php?t=2451696
If you are not brick just boot loop just this might help http://forum.xda-developers.com/showthread.php?t=2451696
Sent from my LG-LS980 using xda app-developers app

help
how do i get the sprint tot...dll files out of the download

kozmikkick said:
Has anyone found a solution to this error? I have this problem on my At&T LGD800 as well. Would have thought there'd be a way to force it to install and ignore errors.
Click to expand...
Click to collapse
it was the dll just make sure you have the ls980 which its the one that tells the computer what phone its working on.

[Q] [REQ] DLL for flashing D805 10B TOT file through LG Flash Tool 1.6 - Please help

Guys, I really need to find the LG DLL file database for flashing .TOT files.
The DLL file I need is for the LG G2 D80510B_00 or LG G2 D80510A_00 TOT file firmwares, to be used on 1.6 LGFlashTool, for Brazil unbranded variant of the phone. I believe it will work for all D805 models.
The .TOT file I intend to use is LGD805AT-00-V10a-724-05-AUG-23-2013-16G+0.tot
I have scoured the internet for over a week and found none other than in a chinese LG G2 forum, the link -- http://bbs.gaodi.net/forum.php?mod=viewthread&tid=662769&extra=page=1&filter=typeid&typeid=2381 -- and the file was no longer available for download. I registered on their forum, but the file was showing an error even after proper registration.
I have not found this DLL anywhere, is there a database for it? How did people come up with the AT&T and Vzn DLL versions? I haven't been able to extract it from the KDZ files either, and the DLLs generated from the KDZ during UpdateTool does not work.
I had bricked the phone originally by trying to use Scott's Clean Rom on it, and it bricked into fastboot mode. I flashed something wrong on fastboot, I can't even remeber what, and rebooted, and fastboot was no longer accessible...
I can get into download mode, and factory reset from stock recovery, no custom recovery available, it is gone. I try to flash KDZ files, many versions besides my D805 one, just for the sake of trying, but all of them get stuck on the 49% point. I have set up port 41, disabled modem, reset phone before trying, selected many different language combinations besides my own Portuguese one. Nothing works.
On LGFlashTool 1.6 it seems like it can work, but it errors at 1%, when I use the DLLs for D800 or D802. I need the DLL for D805. I even managed to find the proper TOT file.
I have also searched for about two days on how to reenter fastboot mode from where I currently am stuck.I even did a DIY Factory Cable on an micro USB I had lying around, soldered it all right, but it did not work, and the cable got very hot. I think these cables will not get G2 into fastboot mode, like it seems to do on Kindle fire and Motorola devices. Maybe my DIY was not that good, but I think it should have worked, I made sure the soldure was set and good.
I am downloading Android SDK to try to get back into fastbood mode from there, if there is a way, as it seems to be. I would try to reflash boot and other partitions in an attempt to fix my phone... Is there a way, or another faster path back into Fastboot?
Download mode does not show the version of the firmware on the phone in the box that displays information in the bottom while fdlashng KDZ files. It leaves a blank line where it should be. I believe it is part of my problem, that LGFlashTool does not see a version on the phone at some point, and fails. Or the phone rejects the PC pushes.
I am almost going to the tech support guy with a flash box downtown, but that would be my last resot, and then official LG support, if all else fails. I don't want to go to LG yet because download mode shows ROOTED in red, and they would see it probably, and my warranty become void.
Thanks for any ideas, guidance or help... Cheers guys.

Read this carefully may help you
http://forum.xda-developers.com/showthread.php?t=2477595

Yeah, that was the guide I used when I landed on fastboot after a bad flash from CleanROM... I flashed some boot.img and recovery.img that didnt work out well.
After I flashed these I rebooted and fastboot mode was no longer loading, instead, I am now on bootloop of the LG logo, with no animation, just the first logo that shows on boot, and I can access stock recovery to factory wipe and also access download mode. My download mode shows rooted warning, and while I am flashing a KDZ, does not show the firmware version I currently have in the middle of the box - before I flashed those .IMGs, it did show the version.
I now a, after a .DLL for D805 10A .TOT file, and I cannot find it. I think the flash method from LGFlashTools 1.6 will work, with .DLL and .TOT files, where the LGFlashTools 1.0.5 did not work for me, with .KDZ.
Or if anyone knows of a way to get into the fastboot mode for G2, pelase let me know. Then I could reflash some .IMG files and hopefully get my phone back online...

Try to flash other version even this is 802 or internetional version. At least you can proof your phone completly brick or not.
I only have all TOT file link of F320 and D802 if you need to try.
Sent from my LG-F320L using xda app-developers app

Hey Buddy.. Im from SP, Brasil... Does you fix it? Maybe I can help u...
Sent from my LG G2 Dev Edition

Hi guys, I finally managed to fix it a couple days after my thread.
I took long to post this, sorry, I had some interner problems...
Turns out there's already a thread explaining how to do it.
http://forum.xda-developers.com/showthread.php?t=2471370
I went to LG Mobile Support Tool and >Options on top right >Update Recovery.
It had to download, so I did it at a friend's who had 50Mbps internet house, to fix this.
I am sorry that I could not manage to do it offline. I even had the KDZ file to flash, but it was only possible through this option in LG Support Tool...
Best of luck to all in any similar problem, I know I was kinda without hope at some points. I spent 2 weeks trying to fix the phone.
Cheers,
Andrew

KriegerBread said:
Hey Buddy.. Im from SP, Brasil... Does you fix it? Maybe I can help u...
Sent from my LG G2 Dev Edition
Click to expand...
Click to collapse
Andrew-droid said:
Guys, I really need to find the LG DLL file database for flashing .TOT files.
The DLL file I need is for the LG G2 D80510B_00 or LG G2 D80510A_00 TOT file firmwares, to be used on 1.6 LGFlashTool, for Brazil unbranded variant of the phone. I believe it will work for all D805 models.
The .TOT file I intend to use is LGD805AT-00-V10a-724-05-AUG-23-2013-16G+0.tot
I have scoured the internet for over a week and found none other than in a chinese LG G2 forum, the link -- http://bbs.gaodi.net/forum.php?mod=viewthread&tid=662769&extra=page=1&filter=typeid&typeid=2381 -- and the file was no longer available for download. I registered on their forum, but the file was showing an error even after proper registration.
I have not found this DLL anywhere, is there a database for it? How did people come up with the AT&T and Vzn DLL versions? I haven't been able to extract it from the KDZ files either, and the DLLs generated from the KDZ during UpdateTool does not work.
I had bricked the phone originally by trying to use Scott's Clean Rom on it, and it bricked into fastboot mode. I flashed something wrong on fastboot, I can't even remeber what, and rebooted, and fastboot was no longer accessible...
I can get into download mode, and factory reset from stock recovery, no custom recovery available, it is gone. I try to flash KDZ files, many versions besides my D805 one, just for the sake of trying, but all of them get stuck on the 49% point. I have set up port 41, disabled modem, reset phone before trying, selected many different language combinations besides my own Portuguese one. Nothing works.
On LGFlashTool 1.6 it seems like it can work, but it errors at 1%, when I use the DLLs for D800 or D802. I need the DLL for D805. I even managed to find the proper TOT file.
I have also searched for about two days on how to reenter fastboot mode from where I currently am stuck.I even did a DIY Factory Cable on an micro USB I had lying around, soldered it all right, but it did not work, and the cable got very hot. I think these cables will not get G2 into fastboot mode, like it seems to do on Kindle fire and Motorola devices. Maybe my DIY was not that good, but I think it should have worked, I made sure the soldure was set and good.
I am downloading Android SDK to try to get back into fastbood mode from there, if there is a way, as it seems to be. I would try to reflash boot and other partitions in an attempt to fix my phone... Is there a way, or another faster path back into Fastboot?
Download mode does not show the version of the firmware on the phone in the box that displays information in the bottom while fdlashng KDZ files. It leaves a blank line where it should be. I believe it is part of my problem, that LGFlashTool does not see a version on the phone at some point, and fails. Or the phone rejects the PC pushes.
I am almost going to the tech support guy with a flash box downtown, but that would be my last resot, and then official LG support, if all else fails. I don't want to go to LG yet because download mode shows ROOTED in red, and they would see it probably, and my warranty become void.
Thanks for any ideas, guidance or help... Cheers guys.
Click to expand...
Click to collapse
Andrew-droid said:
Hi guys, I finally managed to fix it a couple days after my thread.
I took long to post this, sorry, I had some interner problems...
Turns out there's already a thread explaining how to do it.
http://forum.xda-developers.com/showthread.php?t=2471370
I went to LG Mobile Support Tool and >Options on top right >Update Recovery.
It had to download, so I did it at a friend's who had 50Mbps internet house, to fix this.
I am sorry that I could not manage to do it offline. I even had the KDZ file to flash, but it was only possible through this option in LG Support Tool...
Best of luck to all in any similar problem, I know I was kinda without hope at some points. I spent 2 weeks trying to fix the phone.
Cheers,
Andrew
Click to expand...
Click to collapse
Hi Guys, I know this is a very very late answer but maybe it can help someone!
DarkSyrius said:
Hi guys, I know this is not the right spot to ask it, but it more visited than other.
I already installed this ROM and Worked all fine, but when I'm trying to install some Magisk Modules and rebooted my device it get stuck at LG logo... I can access Download mode but not my TWRp recovery.
Any solution to my problem? Just a little help...
Thank you so much anyway!
Click to expand...
Click to collapse
Thanks to all that tried to help me! I appreciate it a lot! Thank you so much!
My only solution was to try short the capacitors following this thread:
https://forum.xda-developers.com/lg-g2/general/lg-g2-unbrickable-fix-real-hard-brick-t2904404
Thanks God I don't need to mess with the board!
My problem was that I tried this ROM LineageOS 17.1 with latest version of TWRP Blastgator. Everything was running fine until I flashed Magisk and installed some Mods, then the device rebooted and I get stuck at logo!
No System and no Recovery access, only Download mode! :crying:
Then I followed this thread:
https://forum.xda-developers.com/showthread.php?t=2432476
I used to install some custom ROMs like Cloudy G2, LineageOS, Resurretion Remix and AOSPX Pie and tried to this new one. I never had any problems!
This time I realized that my device was forever bricked, my last hope was to short the capacitors but I tried all ways to back to Stock because in Downlaod Mode my device was recognized by Windows.
I tried this in Windows 10 x64 but no success, then I formatted an old HD with Windows 7 x64 to try again!
Old Flash Tool get me stuck at 2% or 4%... no success in both system with all LG drivers available... NO SUCCESS!
https://forum.xda-developers.com/showpost.php?p=53313255&postcount=5400
LGUp only gives Unknow Device and never start but it's seens the device on port 41 - that I changed following the tutorial.
My last hope was New Flash Tool but I needed TOT file for my Device - D805 not D802 and the correct DLL. initially I didn't find anywhere... Like this guy:
https://forum.xda-developers.com/showthread.php?t=2583851
I give a lot of tries... a lot of different files, DLLs, tried .KDZ and .DZ, only errors and errors... a lot of "Failed to Load()"...
I'm getting frustrated until I see this thread:
https://forum.xda-developers.com/showthread.php?t=2582142
And found this mine of gold of Downloads:
http://downloads.codefi.re/autoprime/LG/LG_G2/
And again, thanks to all, there is a hope in the D805 folder!
I get the TOT File: BIN_LGD805AT-00-V10a-724-05-AUG-23-2013-16G.zip and tried the LG Firmware Extractor (https://forum.xda-developers.com/showthread.php?t=2600575) to get a new DLL (LGUP8974.dll).
And voilà, like a charm that WORKED!!!!!!!!! :fingers-crossed::highfive:
It installed Jelly Bean the with the Official LG Updater I installed Kitkat and finally Lollipop.
Later I'll try this LineageOS Rom again!
I hope I can help someone in need like me!!
I thank this forum a lot!!
And please excuse my English!
Thank you so much!

Help... Imei null

Hi, first of all, this is my first thread on XDA... this is the best site to find any answer related to phones...
Im experiencing a very hard trouble here with my LG G2 D805
I bought it refurbished from a person who made a wrong flash to this device and he gave it to me bricked... so i decided to get into the task to fix this phone... first i made it power on in the first day... the phone on the back cover, says d805, but in hardware info says d802...
i read about about those changes and it was something "common" and "easy" to fix, but hey... then i checked and had Imei NULL... and it begun to restart almost every 3 minute... this is supposed to happen when there's a wrong modem.img on the phone....
the phone says on the back that its a 805, so i went into tutorials to make the 802 root and recovery,, i got it.. then i tried all of this:
- Try to change my build.prop model number, no success
- Tried flashing 805 modems (i found 3 different), no success
- I found other tutorial where it can be fixed with tot files, and i found dll and tot for 805. no success
- Tried normal flash on lg flashtool with 805 kdz, no success
- Tried CDMA>Cs_Emergency>CSE flash, no success
- Tried uninstalling all drivers and again the above, no success
I found just one way to make it "work" and as long as i had recovery, i flashed cloudy rom... it works, doesnt reboot or anything... But the only thing I'm missing is my IMEI... it shows NULL, and also i dont have baseband, but can use everything except simcard related
the KDZ's i've tried are here http://lg-phone-firmware.com/index.php?id_mod=36
I tried with:
D80510A_00.kdz
D80510B_00.kdz
D80210A_00.kdz
and its variables from countries
also tried all this steps and flashed that only tot file that i could get to find of 805: http://forum.xda-developers.com/showthread.php?t=2667258
jamm513 said:
@GTMoraes i think you choose the hard way, and i need to tell you,the phone is not a D802 now. and no one need to accept that, there are more easy ways (i past for this and i learn how to fix whithout flash a D802 kdz) than make your D805 a D802 G2:
1. Uninstall your drivers and install again
2. Just replace the the phone build.prop for a D805 build.prop reboot and flash your D805 kdz, done.
3. if you done have a D805 build.prop just edit the one you have and change all d802 lines for d805, reboot and flash your D805 kdz, done.
4. try the @monkey5i solution ( http://forum.xda-developers.com/showpost.php?p=50751778&postcount=9), it works too.
5. if the 2 past ways dont work for you, do this:
- follow this guide http://forum.xda-developers.com/showthread.php?t=2475045
- for the guide use this tot file http://downloads.codefi.re/autoprim...N_LGD805AT-00-V10a-724-05-AUG-23-2013-16G.zip and the attached dll file
- follow the guide and done, this guide unbrick any LG G2 Variant whit the proper tot and dll file.
6. share this post for any who have problem going back to stock or the 49% flash error.
Click to expand...
Click to collapse
I haven't sleep in days, and at this point I think i've read almost everything about this issue and nothing seems to work... please, i need help with this, this is my only phone.. and i dont want to have an expensive FMradio...
thanks in advance for the help

Anyone knows something? i really need this phone.. please

really?
nothing??
Im on my own on this???

Joanse said:
I bought it refurbished from a person who made a wrong flash to this device and he gave it to me bricked... so i decided to get into the task to fix this phone... first i made it power on in the first day... the phone on the back cover, says d805, but in hardware info says d802...
I found just one way to make it "work" and as long as i had recovery, i flashed cloudy rom... it works, doesnt reboot or anything... But the only thing I'm missing is my IMEI... it shows NULL, and also i dont have baseband, but can use everything except simcard related
Click to expand...
Click to collapse
If you truly have d802 hardware, you may have to flash a d802 modem in order to get your IMEI back. Do this at your own risk but it has worked for some of the d802 frankenphones that actually have d800 hardware. (d800 modem restores IMEI in their case)

iowabowtech said:
If you truly have d802 hardware, you may have to flash a d802 modem in order to get your IMEI back. Do this at your own risk but it has worked for some of the d802 frankenphones that actually have d800 hardware. (d800 modem restores IMEI in their case)
Click to expand...
Click to collapse
I already tried that, it didnt work... hardware says d805, but when i recieved it said 802... i know now how to change it from 805 to 802 and back, but flashing every baseband i found for 805 and 802 would not work, took every BB for those versions in this thread http://forum.xda-developers.com/showthread.php?t=2451426

Joanse said:
I already tried that, it didnt work... hardware says d805, but when i recieved it said 802... i know now how to change it from 805 to 802 and back, but flashing every baseband i found for 805 and 802 would not work, took every BB for those versions in this thread http://forum.xda-developers.com/showthread.php?t=2451426
Click to expand...
Click to collapse
You may have to attempt a fix with QPST then assuming you know your original IMEI.

iowabowtech said:
You may have to attempt a fix with QPST then assuming you know your original IMEI.
Click to expand...
Click to collapse
Already tried, but always get a error message that says something like cannot write Imei... i think it can be drivers issue because sometimes when i connect it says installing CDC serial and after minutes it gets error... do you know if this is making some conflict?

Joanse said:
Already tried, but always get a error message that says something like cannot write Imei... i think it can be drivers issue because sometimes when i connect it says installing CDC serial and after minutes it gets error... do you know if this is making some conflict?
Click to expand...
Click to collapse
I wonder if it needs to use a specific com port? I have honestly not attempted that fix.

iowabowtech said:
I wonder if it needs to use a specific com port? I have honestly not attempted that fix.
Click to expand...
Click to collapse
i tried also with EFS pro but it asks me to have super user on stock, but being on stock it doesnt stop rebooting, so its almost impossible to install it

Joanse said:
i tried also with EFS pro but it asks me to have super user on stock, but being on stock it doesnt stop rebooting, so its almost impossible to install it
Click to expand...
Click to collapse
But you are able to enable usb debugging and attempt a qpst fix without it rebooting? Do the reboots only occur when you try to open apps?

iowabowtech said:
But you are able to enable usb debugging and attempt a qpst fix without it rebooting? Do the reboots only occur when you try to open apps?
Click to expand...
Click to collapse
with the many attempts i've made i know now how to root it (without SU) and install recovery, i have usb debugging on... and it lets me have enough time to try it with qpst, but it doesnt even let me read phone info

Need EFS backup from an AT&T D800
Hi, I have the issue IMEI = null sinse I've done an update of a rebadged D802 (really D800) from KK to LP, I tried everything i found in forums but nothing changed.
I can't use NV tools or QPST because the phone is not recognised and the connection can't be maintained.
So, the last solution i didn't try yet is to flash an EFS backup from another AT&T D800.
so, where can I find an EFS backup (with IMEI 0 or real IMEI, i'll change it with mine)
It'll be very nice if someone helps me getting my phone back to work
Thanks

[Fixed]no IMEI,bad touchscreen after flashing D802 kdz.

I am not a dev or expert,I am just a regular guy who is suffering after buying franken D802.while trying to fix it,I have read a lot and saw that 70% users can't get there phone back.And TOT hex editing seems pretty hard to me as I could never pass previousload error.
So lets start from the beginning. I bought a D802,then I tried upgrading it by D802 kdz.now the phone has
1.No IMEI
2.bad touchscreen.
3.internal storage or MTP isn't shown on PC.
4.etc.
Now let's start.
1.open up the phone,see what's written in the motherboard.most of the time it's D800.
2.then get an OTG mouse and try to root it via apps like kingroot ,stumproot etc.because PC rooting method with IOroot doesn't work most of the time.
And don't worry if it shows error,keep trying.
Important:
*it's not possible sometimes to download apps via WiFi.I don't know why.if that happens,try installing them from a pendrive connecting via OTG HUB.
*If apps never gets installed,disable Verify Apps from settings>security
3.after rooting,change the model number and all D802 to your model(D800 in my case) via editing build.prop with any apps like es file explorer or build prop editor.
4.reboot device and see if software version,and model number changed.
5.flash D800 or your TOT or KDZ without any editing,from download mood.if your download mood shows secure boot error,use SRK tools to fix it,and SELECT D802,again SELECT D802 in SRK tools.
Because if you choose your model,like D800,your phone will go in fastboot mood.
Bingo!maybe your G2 is back! ✌?
Off topic:Took me 1.5 months to find a way to fix it! ?

I am stuck a fastboot mood after selecting D800 in SRK tools.
Fastboot devices aren't recognized and no QHSUSB_BULK .?
I am really afraid of tearing the phone up and shorten pins or something!

Jongla said:
I am stuck a fastboot mood after selecting D800 in SRK tools.
Fastboot devices aren't recognized and no QHSUSB_BULK .?
I am really afraid of tearing the phone up and shorten pins or something!
Click to expand...
Click to collapse
I don't think you have to shorten pins if you have fastboot!
What's your phone shown while connected to fastboot mood in PC?

Herny123 said:
I don't think you have to shorten pins if you have fastboot!
What's your phone shown while connected to fastboot mood in PC?
Click to expand...
Click to collapse
It's simply shown as "Android".

Jongla said:
It's simply shown as "Android".
Click to expand...
Click to collapse
Oh I had the exact same problem! ?
Uninstall all drivers,then installed updated LG drivers.and then install PDAnet.
Look at device manager.It should show your device as ADB interface or something and your phone should have a new line "fastboot processing commands"....

Herny123 said:
Oh I had the exact same problem! ?
Uninstall all drivers,then installed updated LG drivers.and then install PDAnet.
Look at device manager.It should show your device as ADB interface or something and your phone should have a new line "fastboot processing commands"....
Click to expand...
Click to collapse
Oh I don't know how to thank you!
Pdanet drivers did my work exactly as you say!! ?
Now what img should I flash?
D802 or D800?

Of course D802 as it thinks its a D802.
Then flash KDZ,then after booting up try doing as op..
Best of luck .. ?

You are a life saver!
Worked perfectly without any haste.
Thanks alot

Where do I will get D802 and D800 Rom kdz and what about flashing kernel
Where do I will get D802 and D800 Rom kdz and what about flashing kernel

go to'go back to stock' thread,you will find all kdz and tot.
And this kdz and tot includes kernels.

My phone model is D802 32GB - Flash KDZ Update to 5.0.2
Now
1.No IMEI
2.bad touchscreen.
3.no Signal
4.32GB Change to 10GB!
DownloadBoot ok - Read Storage in PC ok
What should I do? Please
KDZ & Tot D802 ( 4.2.2 (10f) - 4.4.2 (20d-20g) - 5.0.2 (30a) ) Tested!
I have flash ROM D800 totfile? Or No ?
if "Yes" : please link to my Download
I tried every way I got tired

avat2064 said:
My phone model is D802 32GB - Flash KDZ Update to 5.0.2
Now
1.No IMEI
2.bad touchscreen.
3.no Signal
4.32GB Change to 10GB!
DownloadBoot ok - Read Storage in PC ok
What should I do? Please
KDZ & Tot D802 ( 4.2.2 (10f) - 4.4.2 (20d-20g) - 5.0.2 (30a) ) Tested!
I have flash ROM D800 totfile? Or No ?
if "Yes" : please link to my Download
I tried every way I got tired
Click to expand...
Click to collapse
Open up the motherboard and see what's written there.
But most probably you have D800.
And if that is the model,here you go for the Tot.
http://storagecow.eu/index.php?dir=Xda/LG+G2/Stock/AT&T/
I flashed 10o version with the method above.

Herny123 said:
I am not a dev or expert,I am just a regular guy who is suffering after buying franken D802.while trying to fix it,I have read a lot and saw that 70% users can't get there phone back.And TOT hex editing seems pretty hard to me as I could never pass previousload error.
So lets start from the beginning. I bought a D802,then I tried upgrading it by D802 kdz.now the phone has
1.No IMEI
2.bad touchscreen.
3.internal storage or MTP isn't shown on PC.
4.etc.
Now let's start.
1.open up the phone,see what's written in the motherboard.most of the time it's D800.
2.then get an OTG mouse and try to root it via apps like kingroot ,stumproot etc.because PC rooting method with IOroot doesn't work most of the time.
And don't worry if it shows error,keep trying.
Important:
*it's not possible sometimes to download apps via WiFi.I don't know why.if that happens,try installing them from a pendrive connecting via OTG HUB.
*If apps never gets installed,disable Verify Apps from settings>security
3.after rooting,change the model number and all D802 to your model(D800 in my case) via editing build.prop with any apps like es file explorer or build prop editor.
4.reboot device and see if software version,and model number changed.
5.flash D800 or your TOT or KDZ without any editing,from download mood.if your download mood shows secure boot error,use SRK tools to fix it,and SELECT D802,again SELECT D802 in SRK tools.
Because if you choose your model,like D800,your phone will go in fastboot mood.
Bingo!maybe your G2 is back!
Off topic:Took me 1.5 months to find a way to fix it!
Click to expand...
Click to collapse
my touch is not working properply. so, how can i change model number any other solution?

what laf, recovery,boot and aboot img
what type of laf.img, boot.img and recovery.img i use for my lg g2.
when i open it i saw d800 AT&T near processor over a sink of processor.
so what type of file i flash to my device to get correct download mode.
the problem which happen's to me is this.
my device was on KITKAT when i try to update my device to lollypop using lg support tool (auto update using lg support tool to latest android version) after that i got no imei, no baseband and bad touch screen than i flash kdz file but same happend no imei,no baseband and badtouch.than i try to flash using TOT method and i wipe out everything.so know i try pin's touching method on which i get qhsusb mode and i am able to flash different img files.but i don't know which version of files i use..do you know than please help me specify the correct version that i flash and get download , recovery all at the same time than i will flash 10d or 10o ROM using TOT method.
but first i need to fix download mode (i don't know which img files i use).
thank you.

Try laf.img,boot.img of D802 if you used D802 as the model to update to lolipop.this will fix download mode.

Umar_khan said:
my touch is not working properply. so, how can i change model number any other solution?
Click to expand...
Click to collapse
The other solution is you have to edit the hex of D800 TOT file,which I could never succeed at.

HELP ME!
I have Lg g2 D80220b Kitkat 4.4.2, LgMobile Support Tools > Upgrade to D80230a Lollipop 5.0.2
now this my phone Touchscreen random clicked, Help me ALL
This phone NEW Phone
/Sorry, My English Language is BAD/

Hello,
My phone is a D800 in inside but i bought it as a D802 and after software update all those creepy things happened.... can you please briefly what i need to do to get it back?
Thanks
Zoheb

lg g2 brick issue
zakir_zoheb said:
Hello,
My phone is a D800 in inside but i bought it as a D802 and after software update all those creepy things happened.... can you please briefly what i need to do to get it back?
Thanks
Zoheb
Click to expand...
Click to collapse
have u solve ur issue bro.

kalpesh patil said:
have u solve ur issue bro.
Click to expand...
Click to collapse
No kalpesh.. i couldn't... looking forward for your help.