Database Users

[Q] G2 d800 with d802 rom/firmware bad flash

I bought a broken AT&T G2 that the buyer did a bad flash or something with. Doing some playing around on the phone I see that the phone is d800/ AT&T G2, with what to appears to be a d802 firmware in it. Phone turns on and boots up to main screen but touch screen doesn't respond well and it reboots after maybe 1 min or two.
I have tried lg flash tool but get failed because it reads the phone as d802 and the dll/tot file are for the d800 and doesn't give me an option to proceed. Also tried LGMLauncher but doesn't download the software, gets stuck at 11%.
Any other help will be appreciated, if not I'll resell this phone.

iredline5 said:
I bought a broken AT&T G2 that the buyer did a bad flash or something with. Doing some playing around on the phone I see that the phone is d800/ AT&T G2, with what to appears to be a d802 firmware in it. Phone turns on and boots up to main screen but touch screen doesn't respond well and it reboots after maybe 1 min or two.
I have tried lg flash tool but get failed because it reads the phone as d802 and the dll/tot file are for the d800 and doesn't give me an option to proceed. Also tried LGMLauncher but doesn't download the software, gets stuck at 11%.
Any other help will be appreciated, if not I'll resell this phone.
Click to expand...
Click to collapse
try using LGFlashTools 1.5
http://forum.xda-developers.com/showthread.php?t=2432476
in section
RETURN TO STOCK AT&T Version ONLY!
maybe you can describe detail why LGFlashTools fail to flash

bullghost said:
try using LGFlashTools 1.5
http://forum.xda-developers.com/showthread.php?t=2432476
in section
RETURN TO STOCK AT&T Version ONLY!
maybe you can describe detail why LGFlashTools fail to flash
Click to expand...
Click to collapse
Tried that, but it fails due to firmware and phone being different. thanks for the help

same problem need help
im in the same boat i accidentally loaded a d802 rom on a vs980 lg flash tool wont let me flash stock kdz because the phone now says d802 because of the bad rom flash and im stuck because i need to put a vz980 .dll but the program says that i need to use d802 because of the rom i accidentally installed
if anyone can help id be more that grateful im stuck with this brick for now and i dont even have a warranty on my phone so i cant get in replaced :crying::crying:

kenpachiramasam said:
im in the same boat i accidentally loaded a d802 rom on a vs980 lg flash tool wont let me flash stock kdz because the phone now says d802 because of the bad rom flash and im stuck because i need to put a vz980 .dll but the program says that i need to use d802 because of the rom i accidentally installed
if anyone can help id be more that grateful im stuck with this brick for now and i dont even have a warranty on my phone so i cant get in replaced :crying::crying:
Click to expand...
Click to collapse
You can still get into recovery right? You try sideloading a correct rom?
Sent from my LG-D802 using XDA Premium 4 mobile app

x714x said:
You can still get into recovery right? You try sideloading a correct rom?
Sent from my LG-D802 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Unfortunately not. It's in a boot loop and when I hold power and volume down it just goes to
[800] fast lot mode started
[850] udc_start()
And that's all I get can i force it into recovery another way

kenpachiramasam said:
Unfortunately not. It's in a boot loop and when I hold power and volume down it just goes to
[800] fast lot mode started
[850] udc_start()
And that's all I get can i force it into recovery another way
Click to expand...
Click to collapse
then you will need ADB to boot into recovery

ssreynolds said:
then you will need ADB to boot into recovery
Click to expand...
Click to collapse
Going give this a try again. But the issue is if my pc has enough time to sync with the phone before the phone reboots.

I've tried something along those lines but to no avail. My phone doesn't show up on my computer in its current status. How can I get map to recognize my phone I have the drives installed and lg upgrade tool can see it so I know it can kinda see it. When I ran Adb devices nothing comes up on the ASB command prompt

kenpachiramasam said:
im in the same boat i accidentally loaded a d802 rom on a vs980 lg flash tool wont let me flash stock kdz because the phone now says d802 because of the bad rom flash and im stuck because i need to put a vz980 .dll but the program says that i need to use d802 because of the rom i accidentally installed
if anyone can help id be more that grateful im stuck with this brick for now and i dont even have a warranty on my phone so i cant get in replaced :crying::crying:
Click to expand...
Click to collapse
try load d802 dll
you can get it from here
http://forum.xda-developers.com/showthread.php?p=48032783#post48032783
and flash it with vz rom

bullghost said:
try load d802 dll
you can get it from here
http://forum.xda-developers.com/showthread.php?p=48032783#post48032783
and flash it with vz rom
Click to expand...
Click to collapse
don't think that's going to work for my situation but I'll give it a try in a bit. So I would get a d800 rom and load d802 .dll? I think once the program sees the .dll file and the firmware, it will fail.

bullghost said:
try load d802 dll
you can get it from here
http://forum.xda-developers.com/showthread.php?p=48032783#post48032783
and flash it with vz rom
Click to expand...
Click to collapse
Tried that link it takes me to a Chinese website and it has a .zip and .txt the zip has a password and the .txt has a bunch of gibberish and some links couldn't figure it out

kenpachiramasam said:
Tried that link it takes me to a Chinese website and it has a .zip and .txt the zip has a password and the .txt has a bunch of gibberish and some links couldn't figure it out
Click to expand...
Click to collapse
http://121.10.243.135/file/MDAwMDAw...&p=&a=0-c6e4c8a5-48049-0/010166&mode=download
try that, I downloaded with my windows phone. Stupid windows phone doesn't have a file manger so I can't locate the .dll. Dont know if the link works. Can't test the dll and forward till later. Let me k ow if you have any success.

iredline5 said:
http://121.10.243.135/file/MDAwMDAw...&p=&a=0-c6e4c8a5-48049-0/010166&mode=download
try that, I downloaded with my windows phone. Stupid windows phone doesn't have a file manger so I can't locate the .dll. Dont know if the link works. Can't test the dll and forward till later. Let me k ow if you have any success.
Click to expand...
Click to collapse
No luck it redirects me to another site and tells me to sign into to a Chinese website and I haven't been able to find the .dll anywhere

kenpachiramasam said:
No luck it redirects me to another site and tells me to sign into to a Chinese website and I haven't been able to find the .dll anywhere
Click to expand...
Click to collapse
Tried it with the d802 dll file and d800. Still fails for me.
Here is the d802.dll
https://www.dropbox.com/s/77isqnkeuixkj6u/LGD802_20130912_LGFLASHv160.dll

well i tried it and it said i have the wrong bin now -_- guess i cant flash the stock .tot then since the phone actually thinks its a d802 now

kenpachiramasam said:
well i tried it and it said i have the wrong bin now -_- guess i cant flash the stock .tot then since the phone actually thinks its a d802 now
Click to expand...
Click to collapse
i think we need some one to hack the dll or the LGFlashTools to skip TOT checking

Ya if we could get someone to do that then I could get everything to go through. Unfortunately I don't know any one with much programming or coding skills. But thanks for the help so far man. It's nice to know not everyone on the Internet is an asshole

kenpachiramasam said:
Unfortunately not. It's in a boot loop and when I hold power and volume down it just goes to
[800] fast lot mode started
[850] udc_start()
And that's all I get can i force it into recovery another way
Click to expand...
Click to collapse
if you can stay longger in fastboot mode
try flash VZ laf.img
fastboot erase laf
fastboot flash laf laf.img
here how to and tool for fastboot
http://forum.xda-developers.com/showthread.php?t=2477595
i think this partition also the responsible for phone type ex D802 or VZ980 where LGFlashTools use it to detect phone type
laf partition will bring download mode to you

Hahaha tried this one to and the one it links me too. My phone isn't reconized my my computer so doing things throught the PCs CMD is out of the question for me and so is pushing the boot .img via ADB since my phone wasn't In debugging mode when I bricked it. But again thanks man. I think I've exhausted most of the conventional fix it threads on this since I've been looking through everything since Sunday

stuck....ls980 thinks it is the d800

my ls980 thinks it is the d800 and I can't seem to flash it back to the ls980.
I flashed a custom ROM thru twrp and I got an error. I tried restoring the backup and the system partition would not mount. after poking around for quite some time I tried restoring the phone in download mode. apparently the computer thought it was the d800 and flashed the system for that phone. when it restarted I saw the at&t boot screen and when it started up it was not working correctly.
I put it back in download mode and tried flashing the phone again. the computer was sure it was the d800. then I tried flashing manually using the DLL intended to convert this and the tot file for the ls980. I get the error saying I can't convert from the d800 to the ls980.
I then tried flashing thru adb from both windows and linux. both say they cannot find the phone regardless how I try connecting.
since I flashed the factory files the phone will not start in recovery mode I have no clue why.
so now I have a phone that:
will not flash the ls980 tot file,
will not connect to adb,
and will not boot into recovery.
now what?
-boxorandyos
<sent from my nexus4>

Dang dude. Harsh. I almost ended up in this same situation after downloading files for the wrong device and noticed literally at the last second and was able to pull the plug, literally, and save my device.
I've been looking for ways to fix it in case it happens again and I don't catch it in time, so if I find the answer I'll let you know. There has to be a way to trick the computer into thinking it's a LS980 like it's supposed to be the same way it thought the phone was a d800.
Sent from my LG-LS980 using XDA Premium 4 mobile app

I was told that there was a DLL file that could be used when flashing it to trick it into thinking it's the ls980 but all I get is an error message I forget exactly what the message says but something to the extent that I don't have the right files for the phone that I have.
-boxorandyos
<sent from my nexus4>

yo
boxorandyos said:
I was told that there was a DLL file that could be used when flashing it to trick it into thinking it's the ls980 but all I get is an error message I forget exactly what the message says but something to the extent that I don't have the right files for the phone that I have.
-boxorandyos
<sent from my nexus4>
Click to expand...
Click to collapse
yo man have you tried using LGNPST, we're in the same boat, i'm waiting for my some downloads on firmwares to try, i'm using LS980 but it thinks it's a VS980 still working on figuring out from my end. i've also heard that the LG mobile support tools can be used to restore the firmware but you gotta do some funny hot swap lol

vegito6 said:
yo man have you tried using LGNPST, we're in the same boat, i'm waiting for my some downloads on firmwares to try, i'm using LS980 but it thinks it's a VS980 still working on figuring out from my end. i've also heard that the LG mobile support tools can be used to restore the firmware but you gotta do some funny hot swap lol
Click to expand...
Click to collapse
woops im a little slow here. what is LGNPST ? I solved the issue by manually editing the build.prop file and that tells the lg mobile support tool that it is a different phone. that was a whole different complicated story of its own but it worked.
sorry I didnt see your comment until now.

def sounds like you used the wrong dll or just the stock lg dll which works with some phones, but others need their specific dll to match the tot and such to make a proper bootloader flash over i believe.

[Q] Soft Brick help me please!!!

PLEASE READ EVERYTHING FOR BETTER UNDERSTANDING
Hey fellow LG Owner(s) I am writing this asking for some help. I know that majority of LG Phones use the same software and flashing tools regarding taking your phone back to stock. I currently own an LG G Flex (LS995 Sprint Variant) and I managed to soft brick my phone. I have posted this same message over at the LG G Flex Threads but so far I have gotten no one to provide me some sort of solution on how to un-brick or factory reset my phone.
The status of my phone before it got bricked was it had Root (IOROOT method), Busy-Box (by Jrummy), Build.Prop was edited to display as a Nexus 5, and boot-loader locked along with no custom recovery. If you’re wondering why my boot-loader was locked and why there wasn’t any type of custom recovery was due to the sad fact that Developers are having a hard time on cracking it.
Now to explain on how I soft bricked my phone. I was changing my font style by using a tool called ROM Toolbox (by Jrummy). I managed to change my font once and I attempted to change it a second time, since I was looking for something that displayed it wider and bolder. So as I applied install on the new font I got an automatic reboot.
The reboot consisted of the normal LG Logo display, followed by a black screen and staying as a black screen. On the upper left of my phone the notification indicator was flashing multiple colors (red, white, blue etc). This is the current state of my phone, black screen with a multicolor notification.
My attempts to fix:
- Simple reboot of the phone ((fail))
- Let the phones battery drain out then charge for a few minutes and restart ((fail))
- Managed to get into STOCK recovery and perform clean partition ((fail)
- Managed to get into STOCK recovery and apply factory reset ((fail))
- I got into some weird mode which also gave me the option to apply factory reset ((fail))
- I followed this tutorial (LG Flash Tool) on how to revert back to stock (by hyelton) ((fail))
Link to tutorial: http://forum.xda-developers.com/showthread.php?t=2644083
The tutorial by hyelton was almost successful to reverting back to stock firmware until I got to the last step (Number 6). The error that occurred by using the LG Flash Tool was when the tool attempted to flash the stock firmware it gave me a Download FAIL!! “Device Model is different“ notification (Images below). I did this tutorial at least seven times and I got no luck. Every single time that I attempted to do this I kept getting the same notification. I have now ran out if ideas on what to do.
My theory, I believe that by changing my build prop to display as a nexus 5 is the reason why I keep getting this fail notification. On the phone it-self when I put it into download mode it even displays as a Nexus 5 (Images below).
I was wondering since it’s possible to get into STOCK RECOVERY, I saw that it had an option for “ADB SIDELOAD” is it possible to push something thru ADB??? Any type of help is greatly appreciated and thanked. Please do not get upset that you see this in multiple LG threads, I am just trying to find a solution to UNBRICK this very expensive phone that I bought and I cannot afford to just use it as a paper weight. THANK YOU AND GOD BLESS
Here is a Link to all my files regarding STOCK tot,dll,lg flash tools,aboot, buildprop, lg usb drivers and adb drivers that are for my phone
Link: https://drive.google.com/folderview?id=0B1D8UNLjuTB6TWpCQ1pJME5qWk0&usp=sharing
i hope these files help anyone that are attempting to help me put my phone back to stock
Alright yall, I am almost official screwed. I purchased this phone about a month ago from Best Buy and they stated that I am out of there 15 day window so I cannot exchange or replace for the same phone. I then went to Sprint on whom I have phone insurance for and they stated that they cannot do anything and that I have to go to one of their Sprint repair stores. I went to one of the repair stores and the gentlemen that assisted me plugged my phone to his computer and immediately knew that my phone was rooted. So from there I played the dumb blonde card acting like I don’t know what he’s talking about and from there he directed me to call LG and see what they can do. So now the current status is I filed a repair request and now I am awaiting a reply from LG. Does anyone have any suggestion???
**SOLUTION** hey yall i got the solution to my problem and it was simply by downloading this universal custom .dll from
http://forum.xda-developers.com/show....php?t=2663369
and i managed to flash back to stock recovery using this guide. instead using the dll on the the guide i used the custom one.
*GUIDE BACK TO STOCK*
http://forum.xda-developers.com/show....php?t=2644083

BUMP

well not sure about g flex but for my g2 I had same problem when flashing back to stock it kept saying wrong firmware finally I found I downloaded an updated firmware and so did not match error, try downloading and flashing the firmware the phone came with but not updated, in my case my phone came with d80010d and I was trying to flash updated d80010o, downloaded d80010d and all went fine, not sure if it's the same for you I too changed my phone model in build.prop and my phone went into fastboot mode on restart. Hope it saves u too.
Sent from my LG-D800 using xda app-developers app

can you link me to where I can find the dll you are using?

XxZombiePikachu said:
can you link me to where I can find the dll you are using?
Click to expand...
Click to collapse
its the second oneeeeeeee
http://storagecow.eu/index.php?dir=Xda/LG+G+Flex/Stock/Sprint+LS995/

lingarajug said:
well not sure about g flex but for my g2 I had same problem when flashing back to stock it kept saying wrong firmware finally I found I downloaded an updated firmware and so did not match error, try downloading and flashing the firmware the phone came with but not updated, in my case my phone came with d80010d and I was trying to flash updated d80010o, downloaded d80010d and all went fine, not sure if it's the same for you I too changed my phone model in build.prop and my phone went into fastboot mode on restart. Hope it saves u too.
Sent from my LG-D800 using xda app-developers app
Click to expand...
Click to collapse
thanks for your response but unfortunately there is only one firmware for the sprint flex at the current moment.

christiam.coronado said:
its the second oneeeeeeee
http://storagecow.eu/index.php?dir=Xda/LG+G+Flex/Stock/Sprint+LS995/
Click to expand...
Click to collapse
ok then try this modified dll hopefully it will work https://www.dropbox.com/s/akcn2b3skv9h4pa/LGLS995_20140116_LGFLASHv151.dll
please do so at your own risk

XxZombiePikachu said:
ok then try this modified dll hopefully it will work https://www.dropbox.com/s/akcn2b3skv9h4pa/LGLS995_20140116_LGFLASHv151.dll
please do so at your own risk
Click to expand...
Click to collapse
same results "device model is different" didnt work. Im willing to try anything. please shoot me some more of your modifications

christiam.coronado said:
same results "device model is different" didnt work. Im willing to try anything. please shoot me some more of your modifications
Click to expand...
Click to collapse
ill see what else I can try I am basically just trying to find out which are all the parts of the dll that check the device which is kind of difficult especially since yours is no longer a part of the g family ill keep looking when I finish the next one I'll let you know

XxZombiePikachu said:
ill see what else I can try I am basically just trying to find out which are all the parts of the dll that check the device which is kind of difficult especially since yours is no longer a part of the g family ill keep looking when I finish the next one I'll let you know
Click to expand...
Click to collapse
wow thanks i greatly appreciate your help. i am open to trial and error and whatever you can think of i will try.

christiam.coronado said:
wow thanks i greatly appreciate your help. i am open to trial and error and whatever you can think of i will try.
Click to expand...
Click to collapse
what did you add to your build prop to make it think it was a nexus 5?

XxZombiePikachu said:
what did you add to your build prop to make it think it was a nexus 5?
Click to expand...
Click to collapse
all that i did to the build prop was change the model to Nexus 5. luckily i have copied my original build prop to my computer. here is the ling to my google drive which i have saved my original build prop
https://drive.google.com/file/d/0B1D8UNLjuTB6UVBGZnhIaWEwNjg/edit?usp=sharing

XxZombiePikachu said:
what did you add to your build prop to make it think it was a nexus 5?
Click to expand...
Click to collapse
attached below is an image of what my original build prop looked like with its original model as ro.product.model = LG-LS995
the LG-LS995 was the part that i replaced with Nexus 5

Why not try to restore your default build prop
Sent from my LT25i using xda app-developers app

harrymason37 said:
Why not try to restore your default build prop
Sent from my LT25i using xda app-developers app
Click to expand...
Click to collapse
how remember that my bootloader is still locked and this model does not have a custom recovery. but i am able to access the stock recovery with an option to ADB SIDELOAD. I got word from a DEV stating that:
"Factory recovery won't let you adb sideload a package without a LG verified updater script so it won't work." (by XDA justinswidebody)
but if he is incorrect i wouldn't mind attempting trial and error. what do you think???

okay so I tried a different approach I grabbed a d820(nexus 5 model) dll and replaced everything inside with info from the ls995 dll hopefully this works heres the link https://www.dropbox.com/s/kh9ns4gzw3i4gq3/d820_ls995.dll

XxZombiePikachu said:
okay so I tried a different approach I grabbed a d820(nexus 5 model) dll and replaced everything inside with info from the ls995 dll hopefully this works heres the link https://www.dropbox.com/s/kh9ns4gzw3i4gq3/d820_ls995.dll
Click to expand...
Click to collapse
ok ill try it out give me a minute

XxZombiePikachu said:
okay so I tried a different approach I grabbed a d820(nexus 5 model) dll and replaced everything inside with info from the ls995 dll hopefully this works heres the link https://www.dropbox.com/s/kh9ns4gzw3i4gq3/d820_ls995.dll
Click to expand...
Click to collapse
no didnt load onto the lgflashtool. these are the notification that i got, images are below
-Failed to load factory s/w
-Failed PreviousLoad ()

christiam.coronado said:
no didnt load onto the lgflashtool. these are the notification that i got, images are below
-Failed to load factory s/w
-Failed PreviousLoad ()
Click to expand...
Click to collapse
what's the version of your flash tool
edit: after some reading to flash nexus tots you need lg flash tool 1.8
re-edit: I believe that the dll needs to be modified so that it accepts the device as a nexus 5 but once it's done flashing it needs to make the device and ls995 again, but for now it's 1am and I need to be up early later so I'll work on something later, also just some extra information on ther stuff: as for flashing the build prop if you can manage to make it into a flashable update.zip(which also places it in corresponding directory) which is also signed and you can sideload it should flash or just give an error, and another thing that could work with above method is flashing a corrupted kernel which will throw your phone into fastboot mode and with correct files and commands you can repartition the entire device to stock(this one is very dangerous/risky would not recommend it)

XxZombiePikachu said:
what's the version of your flash tool
Click to expand...
Click to collapse
Setup_LGFlashTool_1.6.01.0529
its on my drive should i downgrade??? https://drive.google.com/file/d/0B1D8UNLjuTB6ekthOGRVMWE3ejA/edit?usp=sharing

[Q] b2cappsetup wont install

im at my wits end!I bricked my phone. im trying to restore to stock using these instructions: http://forum.xda-developers.com/showthread.php?t=2432476, but I cant get the GD lgmobile support tool to install! ive tried disabling my firewall. any ideas?? also I have a vs980. which of the following KDZ files do I use: VS98010B_13.KDZ, VS98011A_01.KDZ, VS98012B_00.KDZ, or VS98024A_11.KDZ ? anyone know of a cheap, but reputable service for unbricking phones? thanks.

lokeycmos said:
im at my wits end!I bricked my phone. im trying to restore to stock using these instructions: http://forum.xda-developers.com/showthread.php?t=2432476, but I cant get the GD lgmobile support tool to install! ive tried disabling my firewall. any ideas?? also I have a vs980. which of the following KDZ files do I use: VS98010B_13.KDZ, VS98011A_01.KDZ, VS98012B_00.KDZ, or VS98024A_11.KDZ ? anyone know of a cheap, but reputable service for unbricking phones? thanks.
Click to expand...
Click to collapse
so I got lg support tool to install, but now it doesn't recognize my phone as being plugged in. in the directions it appears that you have to enable usb debugging, but I cant do that cause my phone wont boot past TWRP recovery.i already wiped everything on the phone. is there a way to flash to stock from twrp?
here is a screen shot. my model isn't listed in the available options for a driver.

lokeycmos said:
so I got lg support tool to install, but now it doesn't recognize my phone as being plugged in. in the directions it appears that you have to enable usb debugging, but I cant do that cause my phone wont boot past TWRP recovery.i already wiped everything on the phone. is there a way to flash to stock from twrp?
here is a screen shot. my model isn't listed in the available options for a driver.
Click to expand...
Click to collapse
Put your phone in download mode

Navigate to c:\windows\system32\drivers\etc
open hosts in notepad++ or whatever..
maybe you'll notice the lines 127.0.0.1 lg..blabla.., just delete them or put # in front of them (#127.0.0.1 lg.blablabla..)
This is in case you tried the automatic offline kdz installer and the vbs couldn't remove the lines itself.

[Q] Possible epic brick...read inside for details!

So, I fudged up here. I installed a BUMPed KK bootloader thinking my kernel and recovery were BUMPed. Was using Render Kernel, turns out the Lollipop version is BUMPed, not KK. Good job, me! Got secure boot error loop and I still had TWRP, so I flashed the JB baseband. No boot. Tried to restore a backup I had (Mahdi + Render). No boot. Well, might as well use LG Flash Tools to go back to stock. Like I haven't done it 80 times before....Failed! Failed! Failed! . . . Failed! (I can't remember how many times I've tried).
I've tried every which way and LG Flash Tool gives me this:
PID: NULL
IMEI: NULL
Model :
DLL : D800
BIN : LGD800AT-01-V10o-310-410-OCT-19-2013+0.tot
SWV :
SWOV :
Model Information Check FAIL!
00000000
So, am I royally screwed?

So you're stuck with black screen/frozen LG logo?
This guide should help.

I did try that guide, and couldn't get my phone to show up in any distro I tried (Ubuntu, Puppy, something else? I think?). I'm going the buy a working one, sell the borked one on eBay route. Oh well, can't win em all.

Moppusan said:
I did try that guide, and couldn't get my phone to show up in any distro I tried (Ubuntu, Puppy, something else? I think?). I'm going the buy a working one, sell the borked one on eBay route. Oh well, can't win em all.
Click to expand...
Click to collapse
Hello im from mexico, yesterday i almost epic brick my one day new LG G2 (AT&T D800) but there is a metod who works (sorry for the bad english)
1.- Download this file search in google ---- > LGD800AT-01-V10o-310-410-OCT-19-2013+0.tot (3.15 gb)
2.- Download the DLL ----------> LGD800_20130904_LGFLASHv160.dll (1389Kb)
3.- Download LGFlashTool
4.- Download LG Drivers
5.- Turn off your phone, then plug the cable from the computer to your phone but first press the "VOLUME UP" button
6.- You'll be now in download mode in your phone.
7.- Go to device manager (change the com of your phone to 41) this is very important
8.- Start LGFlashTool, place the .dll and .tot file then press ok
9.- Press the icon "PLAY"
10.- Wait until the bar progrees is 100%, then just press the red botton.
You will have Jelly Bean but this method just work perfect, maybe you can check this vide too
watch?v=BZVKQ5SZyUk&index=1&list=FLab1_SjFokmDNCNBt2DVPVw

Thanks for the information. The link for the video doesn't work or is incomplete. Can you repost the video link?
soyskyler said:
Hello im from mexico, yesterday i almost epic brick my one day new LG G2 (AT&T D800) but there is a metod who works (sorry for the bad english)
1.- Download this file search in google ---- > LGD800AT-01-V10o-310-410-OCT-19-2013+0.tot (3.15 gb)
2.- Download the DLL ----------> LGD800_20130904_LGFLASHv160.dll (1389Kb)
3.- Download LGFlashTool
4.- Download LG Drivers
5.- Turn off your phone, then plug the cable from the computer to your phone but first press the "VOLUME UP" button
6.- You'll be now in download mode in your phone.
7.- Go to device manager (change the com of your phone to 41) this is very important
8.- Start LGFlashTool, place the .dll and .tot file then press ok
9.- Press the icon "PLAY"
10.- Wait until the bar progrees is 100%, then just press the red botton.
You will have Jelly Bean but this method just work perfect, maybe you can check this vide too
watch?v=BZVKQ5SZyUk&index=1&list=FLab1_SjFokmDNCNBt2DVPVw
Click to expand...
Click to collapse

Moppusan said:
I did try that guide, and couldn't get my phone to show up in any distro I tried (Ubuntu, Puppy, something else? I think?). I'm going the buy a working one, sell the borked one on eBay route. Oh well, can't win em all.
Click to expand...
Click to collapse
It says model information check failed.
Did you maybe flashed another rom before or what because the LG Flash tool first checks as a safety measure or your phone is really D800, but you might have a mod or yeah I don't know what you all did but your phone Might is now D803 or some other number I don't know. But what you can do is edit the Dll with some hexeditor as far as I remember to D801, D803 etc Till flashing works.
So just edit the D800 DLL to think that it must check for another device model number which your rom has which you used last? And you should be fine with your issue and you can continue flash it to stock normally. I hope it's not too late for you yet cause it will spare you some bucks.
http://forum.xda-developers.com/showpost.php?p=56961336&postcount=251
Or just try to find the good dll file, or a DLL file without checking phone model is maybe the best. I hope you can still fix your problem. Goodluck mate,
-Wulsic

wulsic said:
It says model information check failed.
Did you maybe flashed another rom before or what because the LG Flash tool first checks as a safety measure or your phone is really D800, but you might have a mod or yeah I don't know what you all did but your phone Might is now D803 or some other number I don't know. But what you can do is edit the Dll with some hexeditor as far as I remember to D801, D803 etc Till flashing works.
So just edit the D800 DLL to think that it must check for another device model number which your rom has which you used last? And you should be fine with your issue and you can continue flash it to stock normally. I hope it's not too late for you yet cause it will spare you some bucks.
http://forum.xda-developers.com/showpost.php?p=56961336&postcount=251
Or just try to find the good dll file, or a DLL file without checking phone model is maybe the best. I hope you can still fix your problem. Goodluck mate,
-Wulsic
Click to expand...
Click to collapse
I LOVE YOU
I hex edited the DLL and TOT files. Turns out the TOT is what I needed to edit, not the DLL, as I could use the "universal" DLL. I started seeing the firmware being updated and said "O M G." My brain couldn't even comprehend it. :highfive:

Moppusan said:
I LOVE YOU
I hex edited the DLL and TOT files. Turns out the TOT is what I needed to edit, not the DLL, as I could use the "universal" DLL. I started seeing the firmware being updated and said "O M G." My brain couldn't even comprehend it. :highfive:
Click to expand...
Click to collapse
Nice to hear that you solved your issue, now have fun with your G2
Also nice to see your signature device change :good: