Hi, my rom got messed up not long ago.
It got stuck in the HP logo without being able to boot up.
Anyway, from what I've see from the HP support site, the official released firmware is still V13.
That sucks since you're not able to use that to flash your slate 7 extreme once you're installed any OTA updates after that.
I've managed to locate V19 of the firmware (KOT49H.17795_415.0374) located in the FTP server of HP (I was desperate).
I believe this might be able to help some people who got stuck without being able to flash their ROM using what's been provided by HP.
ftp://ftp.hp.com/pub/softlib/software12/COL57518/ob-138163-1/update.zip
I hope that helps.
Thanks for reading.
Hello
Thank you very much for the contribution, but you will have the updte.zip in another site that you can pass me, the FTP is incomplete.
thank you very much
Related
hi guys
having real problems with my spv m1000,i got an wm5 upgrade from eBay (worst idea of my life) and followed full instructions provided wich included bucking up my old OS with xda image tool. after installing wm5 i was not pleased with it at all so i tried to go back to my old os but xda image tool said it could not see my device. so i decided to go back to wm2003se as i new there was a rom available but now iv still got bugs and xda image tool is still not seeing my device on top of all that i found a newer rom of wm5 and thought its worth a try but now my computer wont see my device in boot loader mode.
if any one can help me out here it would be great. would be brilliant if i could just go back to wm2003 that i had originally
thanks
Just wondering, I am not returning it just yet... Still having a go trying to solve the problem i'm going through. But just in case i have to replace my Pocket PC HP Ipaq 612c because i have dead pixel on my screen plus the centre of the screen is relatively raised higher compared to the rest of the screen (making me have to press harder to register presses), should i have to restore the roms i've upgraded here back to it's original version? Also the Firmware back to v.0.81 from this new one of v.0.89?
My current updated version is:
Rom Date: Jun212008
Rom Version: MP-1.01.04
Bootloader: MP-1.00.03
Where can i find old rom version MP. 1.01.01??
PLEASE HELP. I am really worried i cant return this defective machine
You need to flash this official rom update and go to service.
Of course, no custom roms
thanks so much, i'm a bit relieved...
So just to confirm. It's ok to flash rom as long as it's the ones officially released by hp like link you gave me?
is this custom rom?
http://forum.xda-developers.com/showthread.php?t=425536
sabertooth said:
is this custom rom?
http://forum.xda-developers.com/showthread.php?t=425536
Click to expand...
Click to collapse
Of course they are....
ok then i will install the one from hp's website before returning the device.
Thx
Hey im new around the forums, and i just tried out a wm6.5 ROM, I don't remember who it was from tho, but i woke up today (7/1/09) and there was a message
'this concludes the beta test of the software release. thank you very much for your time and effort in helping make this a great product for our customers.
to obtain a newer release or further information, please revisit the website that you used to obtain your current beta release.'
now i wasn't aware that this was a beta, but now im looking for another ROM to replace it, but since that message is up my phone is locked and is in airplane mode and i cant get out of it so my phone wont sync with my computer to flash a new ROM on it. any help on how to do this is greatly appreciated. thank you.
Start the Bootloader then you can flash a new one with micro sd method or via usb.
Same problem here, I just made a post about it. The rom is JustHome I believe
Hi, I'm going out of my mind trying to get to 2.1 but I need to update to the .66 from February.
I'm using Windows 7 32bit and once or twice I have managed to get the phone to start to update but it comes back with error 170. I've tried everything I can think of. Downloaded the drivers and updated but in Device Manager I have either 'HTC Dream ADB Composite Interface' or in disk drives 'HTC Android Phone USB'.
Is there any way I can boot the update from my SD card?
Any help will be fantastic.
I'm having this exact same problem, tried updating the drivers but to no avail. Any help would be appreciated.
Greetings folks,
Try the following :
http://forum.xda-developers.com/showpost.php?p=7404108&postcount=94
Make sure you have the right settings under " USB debugging "
Settings - Applications - Development
Or why not root and use another rom like SenseHero B5.1
This is the one i like the most by far,
Means you have to downgrade your ROM version to 2.73.61.5Â
More information :
http://theunlockr.com/2009/08/27/how-to-root-your-htc-hero-in-one-click/
Nice and easy to follow and ever time i go back to a RRU file from orange only ever lasts about 2 days at the most,
http://www.htcdevscene.co.uk/
Regards
Steven
Thanks for the reply Steven.
Can I just clarify that if I follow the www.theunlockr.com method by rooting the phone I can then load the official .66 firmware? If this is the way to do it, where can I get that firmware from?
To be honest, I'm not wanting to put on any other custom firmwares and I want to update to the HTC official 2.1 firmware only.
Thanks again for any help.
blackg1000 said:
Thanks for the reply Steven.
Can I just clarify that if I follow the www.theunlockr.com method by rooting the phone I can then load the official .66 firmware? If this is the way to do it, where can I get that firmware from?
To be honest, I'm not wanting to put on any other custom firmwares and I want to update to the HTC official 2.1 firmware only.
Thanks again for any help.
Click to expand...
Click to collapse
No no rooting was only to use custom roms,
How ever if it comes to it flash to another rom and then back to .66
First you need to get orange RRU ROM version 2.73.61.5 from
http://www.htc.com/uk/SupportDownload.aspx?p_id=283&cat=2&dl_id=675
Flash this and on first boot you should get a message to advise of a update,
No need to finish setting the phone up but go a head with the download,
Once downloaded it will flash a new radio and reboot,
Then you should have .66
I was still trying to get 2.1 from orange last night,
Ever time i asked it to check for updates it said it was up to date all ready yet still on 15
Back to using a custom rom again today,
Hope your able to get sorted soon folks.
Sorted. Updated it with my mates laptop running Vista. Updating to 2.1 now. THANK GOD!!!
blackg1000 said:
Sorted. Updated it with my mates laptop running Vista. Updating to 2.1 now. THANK GOD!!!
Click to expand...
Click to collapse
Glad your all up and running man,
Can you inform us on how you did it for the information of others !
Any chance of screenies of 2.1 orange rom ?
And is it that much better ?
Regards
Steven
Hi peeps, I've asked this in a couple of threads but the posts look a little dead.
I need help which i know the answer is out there somewhere but mostly in Spanish. Thats what it seems when it comes to the ZTE devices.
Ok so i rooted my L2 and put a custom recovery on that I first come across but never used before Carliv Touch 2.2.
I made a back up and then found a KK ROM. I installed the ROM but it didn't give me any UK network, so I used my back up and all was fine.
A couple of weeks later I done a stupid thing and completely wiped my device android along with it. I can still get in to the recovery but my backup says MD5 mismatch. I downloaded a custom ROM to my desktop and tried to sideload it in but that kept on failing.
I need help please, I have no idea what is going on. I know a little about these things but not so much when it comes to MTK devices.
Can anyone help, If someone can do a lil step by step for me with links to what I would need, I would be very grateful.
There's loads of tut's on the web but all in Spanish with links to firmware for their networks.
Again...... Please and Thanks