I have been up all night trying to root my note 3 sm-n900w8 i dont get it , some things say it works and some say that you need super binary for it to work and i guess there isnt one for the note 3 , can someone please help me out it says in red on one side fail! And then green pass! I looked all over and i couldnt find what geting failed and pass at the same time ment
If u on 4.4.2 kitkat try Ghehot method towelroot apk from
https://towelroot.com/ no pc needed.
DAVID.GOOD14 said:
I have been up all night trying to root my note 3 sm-n900w8 i dont get it , some things say it works and some say that you need super binary for it to work and i guess there isnt one for the note 3 , can someone please help me out it says in red on one side fail! And then green pass! I looked all over and i couldnt find what geting failed and pass at the same time ment
Click to expand...
Click to collapse
Do you have 2 samsung phones/tablets attached to the PC? Odin recognises both but only flashes the one in download mode as it can't utilise download mode in the other. Therefore the one in download mode is a success but the one just attached failed....
note 4 n910h param.bin file ???
hi everyone
i need very fastly note 4 n910h param.bin file
when i rooted device wrongly install note 3 tar file (BL_HA3GZS_CLEAR_WARRANTY_BIT by sawgent.tar) so
note 4 start with in first screen (when start on button ) note 3 n900 boot screen
i tried to install full rom via odin from http://www.samfirmware.com/
but nothing changed,
but phone is working perferctly just start screen is note 3 (
there is two files in BL_HA3GZS_CLEAR_WARRANTY_BIT by sawgent.tar file
param.bin(note3)
sboot.bin(note4)
please help me ..
waiting your reply
Wrong Place to ask questions Dude......will be closed soon :-/
Hello to all boys,
about three days ago my notes 4 sm- n910f , has begun to restart , freeze and lag , I tried to flash the original FW , but the problem persists ,sometimes it enters into download mode and the following screen appears:
Could not boot normally,
mmc read faillure.
have to flash pit file manually with stock firmaware?
sorry for my bad english:angel:
and thanks all.
It seems hardware related, send it to service.
Does any one can help with this problem ?
I bricked my N910F (flashing to much with ODIN, playing with PIT files ....). last times I Remember I read an SBL1 error and aboot error message on ODIN after that my phone never turns on and when I plug the usb cable on laptop it shows a qualcomm hs-usb qdloader 9008 on device manager.
Any one please could help Because i wrote many threads with no response at all
:crying::crying::crying:
IronDrass said:
Does any one can help with this problem ?
I bricked my N910F (flashing to much with ODIN, playing with PIT files ....). last times I Remember I read an SBL1 error and aboot error message on ODIN after that my phone never turns on and when I plug the usb cable on laptop it shows a qualcomm hs-usb qdloader 9008 on device manager.
Any one please could help Because i wrote many threads with no response at all
:crying::crying::crying:
Click to expand...
Click to collapse
Take battery off, connect the phone to the charger, put the battery and press vol - and power for like 30sec and see if it vibrates, if it does vibrate just press vol up and then connect to odin and see if it gets recognized. If yes just flash stock rom.
---------- Post added at 11:35 PM ---------- Previous post was at 11:30 PM ----------
koka365 said:
Take battery off, connect the phone to the charger, put the battery and press vol - and power for like 30sec and see if it vibrates, if it does vibrate just press vol up and then connect to odin and see if it gets recognized. If yes just flash stock rom.
Click to expand...
Click to collapse
If it doesnt vibrate you can try this :
drive.google.com/file/d/0BwPrtCaRCo_AM2xCMlNPRGFXcnM/view?usp=sharing
Sad to hear about it. Try using "USB Jig". It has worked for the note 3 so hopefully it will work for the note 4 too. It will bring your phone to the download mode. Then you can flash the official firmware for your 910F model. http://www.ebay.com/itm/Micro-USB-J...ng-Galaxy-S4-S3-S2-S-Note-3-2-1-/331298393201
koka365 said:
Take battery off, connect the phone to the charger, put the battery and press vol - and power for like 30sec and see if it vibrates, if it does vibrate just press vol up and then connect to odin and see if it gets recognized. If yes just flash stock rom.
---------- Post added at 11:35 PM ---------- Previous post was at 11:30 PM ----------
If it doesnt vibrate you can try this :
drive.google.com/file/d/0BwPrtCaRCo_AM2xCMlNPRGFXcnM/view?usp=sharing
Click to expand...
Click to collapse
I think to perform this guide i should have a working Note N910F which I don't have .
IronDrass said:
I think to perform this guide i should have a working Note N910F which I don't have .
Click to expand...
Click to collapse
Well I think you just need some other samsung device to use in odin because that file flashes into the SD card and not the phone.
If you read carfuly the instructions you see that you need to enable one option to flash to SD Card that pit file (and the other files wich you need to download)
koka365 said:
Well I think you just need some other samsung device to use in odin because that file flashes into the SD card and not the phone.
If you read carfuly the instructions you see that you need to enable one option to flash to SD Card that pit file (and the other files wich you need to download)
Click to expand...
Click to collapse
Or it seems that you can use a USB JIG. I didnt know about the usb jig for note 4 but I guess there is one.
i bricked my note 4
Hello Everyone,
i have same problem with my "Samsung GALAXY Note 4" "5.1.1"
* 1st : the problems start whene i apply the "6.0.1" update (Could not do normal boot, ddi : mmc_read failed ...)
* but sometimes whene i remove and put the battery it turn on until 2 days whene i put it into charger (i found it dead)
* now it enter directy to Qualcomm Mode
so i made a search i found that there is one method to unbrick it (using SD Card)
"(14-96) Boot Recovery Guide_Qualcomm_APQ8084 (includes SM-N910F) Rev 3_0.pdf"
is there is anyone try this!!!
thanks.
I will try next week
salim333 said:
Hello Everyone,
i have same problem with my "Samsung GALAXY Note 4" "5.1.1"
* 1st : the problems start whene i apply the "6.0.1" update (Could not do normal boot, ddi : mmc_read failed ...)
* but sometimes whene i remove and put the battery it turn on until 2 days whene i put it into charger (i found it dead)
* now it enter directy to Qualcomm Mode
so i made a search i found that there is one method to unbrick it (using SD Card)
"(14-96) Boot Recovery Guide_Qualcomm_APQ8084 (includes SM-N910F) Rev 3_0.pdf"
is there is anyone try this!!!
thanks.
Click to expand...
Click to collapse
dyasten said:
I will try next week
Click to expand...
Click to collapse
Next week has passed, can we have the microsd image you have generated ?
rajkosto said:
Next week has passed, can we have the microsd image you have generated ?
Click to expand...
Click to collapse
I need to borrow a friends N910F but he broke his digitizer. So I'm waiting till he made it ...
You don't need the digitizer to work for this, only the microsd port, and hardware buttons.
dyasten said:
I need to borrow a friends N910F but he broke his digitizer. So I'm waiting till he made it ...
Click to expand...
Click to collapse
BROTHER.
I am waiting like hell.. Please do a whole world a favour and bring us that dbrick img. Or explain to me that how could i creat that img. I am working with mobile industry maybe i got my hand on any note 4 so i could make the img and share.
jawad.amjad said:
BROTHER.
I am waiting like hell.. Please do a whole world a favour and bring us that dbrick img. Or explain to me that how could i creat that img. I am working with mobile industry maybe i got my hand on any note 4 so i could make the img and share.
Click to expand...
Click to collapse
This guide might be of some help :
https://mega.nz/#!X1UQxAwI
Reporting Via N910G
yashthemw said:
This guide might be of some help :
https://mega.nz/#!X1UQxAwI
Reporting Via N910G
Click to expand...
Click to collapse
What's the decryption key ?
Usamad said:
What's the decryption key ?
Click to expand...
Click to collapse
Try this one
https://mega.nz/#!qt81HZiS!-XyNN1m_TEi8dvGrjnEQsxClpfzk7nT_0DliYFJDPew
Reporting via N910G
Thank you, but I already got those files and I couldn't flash them to the sd card, i used an S4, and it just hung when starting T-Flash.
If you can inform me and any other who have the same problem (hard bricked N910F) that will be great.
from what i understood, the method consists of making a bootable sd card using a :
- working phone, SD card, PC
- Odin, the pit file you provided and a bootloader.
I've two questions :
- how can I get the right bootloader file (I've a N910F but i don't know the exact model number BL_N910FXXXXXXXX since i bought my phone from the internet)
- do I need other files than the pit file and bootloader?
Thank you
Usamad said:
Thank you, but I already got those files and I couldn't flash them to the sd card, i used an S4, and it just hung when starting T-Flash.
If you can inform me and any other who have the same problem (hard bricked N910F) that will be great.
from what i understood, the method consists of making a bootable sd card using a :
- working phone, SD card, PC
- Odin, the pit file you provided and a bootloader.
I've two questions :
- how can I get the right bootloader file (I've a N910F but i don't know the exact model number BL_N910FXXXXXXXX since i bought my phone from the internet)
- do I need other files than the pit file and bootloader?
Thank you
Click to expand...
Click to collapse
It doesnt matters , what is there after n910f .
Flash the latest bootloader available for n910f .
Tsar3000 has recovery firmware for note 4 .
Search for "recovery firmware tsar3000 " on google.
In that file you will get a complete stock firmware (ap , bl , cp ,csc ,pit).
Download it and use the bootloader .
As far as i know , the flashing of those files on sd card , should be done via a functional
note 4 .
There is another method of creating debrick image , a tmobile user has already got one debrick image working .
Reporting via N910G
same problem bro, stuck at the t flash.
did anyone found a solution?
can we post a request to the guys that have a working N910F in the other threads (ROMS for example) so they make an image for our dead N910F.
Hey guys, i successfully created a Debrick.img for note 4 , used my own functional note 4 to create one .
http://forum.xda-developers.com/showthread.php?t=3488114
Don't forget to Press thanks .
Reporting Via N910G
Full Unbrick Solution N910F
Working solution: pastebin (dot) com/7KQxRRNF
^^ I'm not able to post outside links. So I had to improvise with pastebin.
Help
Today I tried to root Samsung galaxy note 3 sm N900v using a root exe application that has two tar files 1.tar and 2.tar in application odin popup runs and provided 1.tar in ap button on completion it got stuck in Samsung logo
And boot into recovery automaticly
I restart phone in download mode and provide 2.tar which again succesfully done in odin screen
Phone booted kingroot(part of rooting software) has not installed
Simply a security notice is showing (unauthorized action has been detected .... )
Would anyone be like to solve my issue
Keeping in mind it has not rooted at yet
Thanks
Post your question here: https://forum.xda-developers.com/verizon-galaxy-note-3