PLEASE NOTE, INFORMATION BELOW DOES NOT BELONG TO ME, I AM SIMPLY SHARING SUCH INFORMATION WITH THE COMMUNITY
http://androidcustomrom1.blogspot.com/2015/08/samsung-galaxy-s6-edge-sm-g928c-twrp.html?m=1
Above is the link to a blogger which was given to me from a fellow YouTuber, goes by the name Matt McNamara
TWRP recovery for Galaxy S6 Edge+ is now a reality and if you are a pro user who thrives on root, custom ROMs and Xposed modules, you’d feel elated to hear that it’s available for Galaxy S6 Edge+.
Custom ROM fix ® provided a download and full guide on how to install Galaxy S6 Edge+ TWRP recovery below.
÷ Supported Devices
•SAMSUNG Galaxy S6 Edge+, model no. SM-G928C
•Don’t try this on other S6 Edge+ variants, like those at T-Mobile, Sprint, AT&T, Verizon, US Cellular, etc. or Canadian S6 Edge+, or any international S6 Edge+ whose model no. is not G928C.
•Don’t try on any other device whatsoever.
•Backup important files stored on your device before proceeding with the steps below, so that in case something goes wrong you’ll have backup of all your important files. Sometimes, Odin installation may delete everything on your device.
*Disclaimer:
Custom ROM fix ® provide various Firmware Updates and Rooting process along with Custom ROM,Modes,file are all belong to their owners/developers. The autor of this site or the developers are not responsible, if you damage or brick your device.Do it on your own risk and follow the instruction properly.
÷ How To Install:
Step 1: Download Odin and TWRP recovery file .
Step 2: Install Galaxy S6 Edge+ driver . Double click the .exe file of drivers to begin installation. (Not required if you have already done this.)
Step 3. Extract the Odin file. You should get this file, Odin3 v3.10.6.exe (other files could be hidden, hence not visible).
Step 4: Disconnect your Galaxy S6 Edge+ from PC if it is connected.
Step 5:Enable OEM unlock on your device.
Go to Settings > About device. And then tap on build no. 7 times or until your get the message "You’re now a developer"
Go back to Settings:, scroll down, and tap on Developer options
Look for Enable OEM unlock and use its toggle to enable it. Accept the warning by tapping on OK button.
Step 6: Boot Galaxy S6 Edge+ into download mode:
Power off your Galaxy S6 Edge+. Wait 6-7 seconds after screen goes off.
Press and hold the three buttons Power + Home + Volume down together until you see warning screen.
Press Volume Up to continue to download mode.
Step 7: Double click on extract file of Odin, Odin3 v3.10.6.exe to open the Odin window, Be careful with Odin, and do just as said to prevent problems.
Step 8: Connect your Galaxy S6 Edge+ to PC now using USB cable. Odin should recognize your Galaxy S6 Edge+. It’s a must. When it recognizes, you will see Added!! message appearing in the Log box in bottom left, and the first box under ID:COM will also show a no. and turn its background blue.
You cannot proceed until you get the Added!! message, which confirms that Odin has recognized your device.
If you don’t get Added!! message, you need to install/re-install drivers again, and use the original cable that came with the device. Mostly, drivers are the problem (look at step 2 above).
You can try different USB ports on your PC too, btw.
Step 9: Load the TWRP file into Odin. For this, click the AP button on Odin and the select the file: TWRP-2.8.7.1-Alpha_G928C.tar.md5.
Step 10.:Make sure Re-partition check-box is NOT selected, under the Options tab. Don’t use PIT tab either. Go back to Log tab btw, it will show the progress when you hit start button in next step.
Step 11: Click the Start button on Odin now to start flashing the firmware on your Galaxy S6 Edge+. Wait till installation is finished, after which your Galaxy S6 Edge+ will reboot automatically. You’ll get PASS message as upon successful installation from Odin.
If Odin gets stuck at setup connection, then you need to do this all again. Disconnect your device,close Odin, boot device into download mode again, open Odin, and then select the firmware and flash it again as said above.
If you get FAIL in the top left box, then also you need to flash the firmware again as stated just above.
That’s it. Enjoy the TWRP recovery v2.8.7.1 on your Galaxy S6 Edge+.
File: TWRP-2.8.7.1_Alpha_G928C.tar.md5 (25.3 MB)
https://userscloud.com/da9qfg78alzb
Alex-V Custom Kernel S6 Edge:
https://www.androidfilehost.com/?fid=24052804347765201
Stock Kernel
https://www.androidfilehost.com/?fid=24052804347808951
Chainfire SuperSU:
https://download.chainfire.eu/696/SuperSU/UPDATE-SuperSU-v2.46.zip
Custom ROMs:
http://www.androidbeat.com/2015/07/best-custom-roms-samsung-galaxy-s6-edge/
Hi! This version of twrp works in the 928g? Thanks
Is the posted stock kernel, 100% stock? Just wanted to make sure, if I use custom kernels, and I opt to go back to stock, I can flash this
Hi,
so i tried to root my phone with a odin file and odin3 v3.07 so i clicked start and after like 20 seconds it said fail so it went to my phone and tried to exit download mode by holding the power button it then took me to a screen that said an error occurred while updating the device software Use the emergency recovery function in the smart switch pc software.is it possible to like use smartswitch so like my data is backed up and reinstall android 5.1.1 with the samsung skin.Or anyway to unbrick my phone.I got my odin file from here
http://forum.xda-developers.com/grand-prime/general/odin-5-1-1-sm-g530t1-oh9-metropcs-t3280445
Thank you all in advance
Need help with samsung galaxy S6 edge plus "Custom Binary Blocked by FRP Lock"
Hello Everyone
I am in a serious trouble with my Samsung galaxy s6 edge plus
I bought one in the market used one. i bring it home and it was ok .
The next day from settings i give a reset but now the phone start and giving me message """ Custom Binary Blocked by FRP Lock""" at the start and phone goes shutdown.
I put the phone in Recovery mode and connect the USB cable but neither windows ( 7 and 10) recognise the device error " Device Descriptor Request Failed"
I watched some youtube videos suggesting different techniques but still device is not recognized by Windows.
What should i do i need help Please.
I know you may have already tried, but what happens if you follow the guide for flashing a stock Rom in Odin (so follow the pre-requisits for USB drivers and what not) then put it into download mode (Power Home Vol down then vol up)
I had an FRP issue which soft bricked my s6 edge+, Samsung Switch, Lies and even ADB tools wouldn't detect the device but Odin detected the phone on Com Port 3. If after the device driver installation fails, maybe go into Device Manager, right click on the phone and update drivers manually.. extract the Samsung drivers and point to that directory.
Help
Today I tried to root Samsung galaxy note 3 sm N900v using a root exe application that has two tar files 1.tar and 2.tar in application odin popup runs and provided 1.tar in ap button on completion it got stuck in Samsung logo
And boot into recovery automaticly
I restart phone in download mode and provide 2.tar which again succesfully done in odin screen
Phone booted kingroot(part of rooting software) has not installed
Simply a security notice is showing (unauthorized action has been detected .... )
Would anyone be like tohelp me in solving my issue?
Keeping in mind it has not rooted at yet
Thanks
Help
Today I tried to root Samsung galaxy note 3 sm N900v using a root exe application that has two tar files 1.tar and 2.tar in application odin popup runs and provided 1.tar in ap button on completion it got stuck in Samsung logo
And boot into recovery automaticly
I restart phone in download mode and provide 2.tar which again succesfully done in odin screen
Phone booted kingroot(part of rooting software) has not installed
Simply a security notice is showing (unauthorized action has been detected .... )
Would anyone be like tohelp me in solving my issue?
Keeping in mind it has not rooted at yet
Thanks :crying: