Hi,
so i tried to root my phone with a odin file and odin3 v3.07 so i clicked start and after like 20 seconds it said fail so it went to my phone and tried to exit download mode by holding the power button it then took me to a screen that said an error occurred while updating the device software Use the emergency recovery function in the smart switch pc software.is it possible to like use smartswitch so like my data is backed up and reinstall android 5.1.1 with the samsung skin.Or anyway to unbrick my phone.I got my odin file from here
http://forum.xda-developers.com/grand-prime/general/odin-5-1-1-sm-g530t1-oh9-metropcs-t3280445
Thank you all in advance
Hi, I recently became a Galaxy S6 Edge+ as a gift, which is stuck on the Samsung Logo (blinking). I am not new to flashing Firmware and Roms (came from the HTC HD2 and Dell Streak 5), but everything I do, I can not come through this. Now I need your help, since it's my first Samsung device. Maybe I have something forgotten?
My device:
SM-G928F with Regional Code AUT (free Switzerland firmware) --> Also Samsung Smart Switch shows me this AUT Version (but it wont recognize it, shows it after typing in the serial)
What have I done:
Samsung Smart Switch does not recognize it.
The last 24 hours I have downloaded the firmware through SamFirm 4 times, I have flashed the phone via Odin about 8 times, after the flashs I have wiped the cache and resettet data (full wipe) through the recovery. One time, the phone came to the android optimatization, but it was stuck on the last app (was 30 minutes on this), after reboot it was stuck on the Samsung logo.
Now I need your help. What can I do further? Do I missed something? Any ideas?
Something strange I noticed: When the phone is off and I plug it in to the wall, the battery drains. I have to put the phone to Download-Mode to charge it. Is it linked to the firmware problem? The charger is original Samsung.
So, I flashed TWRP, the Note7 Deodexed Rom and SkyHigh kernel, but it's the same... any sugestions?
I read about a pit file, what is that? May be this the solution?
What I did the last 3 houers was to test Smart Switch With the mac version, the rescue function did not work, the hole program crashed each time. On the windows version it suceed, but my phone is showing just the blinking Samsung logo. Every now and then it vibrates, but nothing happens, so I am at the start of the problem again. Any ideas?
Next update: I flashed the original firmware with a pit file 3 minutes ago. I learned a lot, learnt that the pit files are the partition-files. Now I'm hoping, that with the new partitions it will boot properly :good: . Stay tuned!
Still the same issue. Please help me
Whenever I start the Recovery, it says "installing system update" and then there is a dead Android, does this matter?
A 4 part firmware with pit file did not help. I downloaded another Firmware from another source, also the same. Now I will do a downgrade and look, if this helps. Pleeeeease, help me!
Infos from the download mode:
Produkt Name: SM-G928F
CA_Type: CA_3
Current Binary: Samsung Official
System status: Custom
Secure Download: Enabled
Know warrenty void: 1 (0x0203)
RP SWREV: B:3 K:0 S:1
Maybe the TWRP Log helps: There are errors in writing, is there something missing? It is the original firmware, with the newest TWRP and SuperSU installed. Still stuck on Samsung (animated) logo.
Listen do you have windows on ur mac i use parallels
but do you have windows anyhoe
Sent from my SM-N920G using Tapatalk
Same here
Hello,
I'm quite new here, but not with flashing.
My son got an S6 Edge plus too, with almost the same problem.
I tried also almost anything, the last few days.
ADB sideload, Odin several versions.
It started out with FRP lock.
After I tried al I could find I think it bricked.
And now it is in the state as described above.
Only first screen and draining the battery if not in download mode.
And when I put it on USB cable it says: "An error has occured while updating the device software. Use the Emergency recovery function in the Smart Switch PC software."
But Smart Switch doesn't recognise the phone!
I can however get the phone in download mode by pushing vol. down, power and home and then vol up.
But in Odin only works: Pit, CP and CSC.
With AP and BL I get errors and fails.
Please help?
For me AP and BL works with Odin. I am a step furhter now. First I flashed with the option: Erase All Nand. Then I installed TWRP and a made a repair for the System and the Caches partitions. With SuperSU installed, and the caches wiped (manual, dalvik and normal caches), it says "Android is starting, Optimizing Apps" and then "Androis is starting, Starting Apps" on a blue screen and when it loads to the end, it is stuck there.
.You get only the first Samsung S6 Edge+ Screen? Then the system files are missing, there is no OS to start (flashed with AP in Odin). Your flash problem sound quite strange. Did you test another cable?
If you want to do it with Smart Switch, the phone should be in download mode. I also had to try it several times. Did you installed the drivers?
@ KatariaMax: I have Windows and Mac PCs, no Parallels. Does it work with Parallels?
So, one problem less. With the Audax rom and kernel, the phone charges normally (but not with Quickcharge), so I don't have to put the phone to download mode. But here is the same problem, after "starting apps" it is stuck. I will do a log from the install, maybe this helps.
@ HugoGroot: Maybe the second post could be the solution for you: http://forum.xda-developers.com/galaxy-s6/help/s6-bricked-t3497687
I read about Sony devices, which are in a bootloop because of the battery. Could this be possible also for Samsung devices? I have bought a battery, just to be sure. Any other suggestions?
I found the problem here: https://talk.sonymobile.com/t5/Xperia-Z3-Compact/Continuous-Restart-and-Optimizing-Apps/td-p/1020656
Samsung Galaxy J5 Prime - SM-G570F
Build - MMB29K.G570FXXU1AQB5
OS - Android Marshmallow 6.0.1
I tried to root the OS. I managed to connect to ODIN and did a recovery from a recovery file shared over internet. However that recovery has a password pattern which didn't allow me to access my phone. After several attempts phone showed a message saying that phone will reset to factory settings. After which phone stuck at Initial LOGO.
Please provide some inputs in getting my phone operational.
Dear Experts, Please help!
android_sriniram said:
Samsung Galaxy J5 Prime - SM-G570F
Build - MMB29K.G570FXXU1AQB5
OS - Android Marshmallow 6.0.1
I tried to root the OS. I managed to connect to ODIN and did a recovery from a recovery file shared over internet. However that recovery has a password pattern which didn't allow me to access my phone. After several attempts phone showed a message saying that phone will reset to factory settings. After which phone stuck at Initial LOGO.
Please provide some inputs in getting my phone operational.
Click to expand...
Click to collapse
There may be two things which may be done
1. Since you've done factory reset The first boot may take some time so wait for 20min and make sure it's working
2. If it's not working yet . Then the recovery file you've have flashed is wrong or you've flashed in the wrong partition . There is also chance that you've interupted the process.
These flashing tools are somewhat complicated I've faced many problems because if any settings weren't set correctly then it would mess all your mobile and also the version you use is very important..
So, contact the developers who are working for the specified mobile for more help. Because they would have over come these issues .
Suggestion:- Never Experiment the odin on your mobile without knowing the every detail before
Help
Today I tried to root Samsung galaxy note 3 sm N900v using a root exe application that has two tar files 1.tar and 2.tar in application odin popup runs and provided 1.tar in ap button on completion it got stuck in Samsung logo
And boot into recovery automaticly
I restart phone in download mode and provide 2.tar which again succesfully done in odin screen
Phone booted kingroot(part of rooting software) has not installed
Simply a security notice is showing (unauthorized action has been detected .... )
Would anyone be like to solve my issue
Keeping in mind it has not rooted at yet
Thanks
Post your question here: https://forum.xda-developers.com/verizon-galaxy-note-3
Help
Today I tried to root Samsung galaxy note 3 sm N900v using a root exe application that has two tar files 1.tar and 2.tar in application odin popup runs and provided 1.tar in ap button on completion it got stuck in Samsung logo
And boot into recovery automaticly
I restart phone in download mode and provide 2.tar which again succesfully done in odin screen
Phone booted kingroot(part of rooting software) has not installed
Simply a security notice is showing (unauthorized action has been detected .... )
Would anyone be like tohelp me in solving my issue?
Keeping in mind it has not rooted at yet
Thanks :crying: