Related
CyanogenMod 9.0
CyanogenMod 7.2.0
"The only rule of CyanogenMod: You dont ask for ETAs."
Dear All,
This thread is created to separate non development post inside CyanogenMod by Team FreeXperia Development thread and to keep it clean.
What can you post here?
-Anything related to FXP & CyanogenMod
-Installation problem
-Non-FXP kernels for FreeXperia CM
-possibly bug? (before forwarded to FXP, which its might not from the ROM)
-problem with installation
-previous version of FXP release.
-All noob questions
What you should NOT post in development thread?
-Thanks, Thank you or +1 (just hit button THANKS if someone else helped you)
-Reporting the same bug that already been raised (please use/view BUGTRAKER before posting/reply)
-Reporting bug on previous version (J & Team are development for latest version, not old )(you can post it here)
-If you plan on downloading new release/the ROM (no need to mention, just download and report the bug)
I hope J / FXP and Team FreeXperia don't mind if i made this thread.
CyanogenMod Development Thread:
{X10}[DEVELOPMENT] - CM7.2.0 - FreeXperia Project
CyanogenMod 7.2 Installation Guide by colossus
{X10}[DEVELOPMENT] - CM9.0 - FreeXperia Project
CyanogenMod 9.0 Installation Guide by colossus
Official CyanogenMod Website:
CyanogenMod
If you like to donate:
FXP paypal
and always hit THANKS to FXP and Team FreeXperia for a great ROM.
Fix for:
{CM9.0} Unofficial Camera hack/fix. thanks to zdzihu
getprop" error... HERE , THANKS TO Hzu
DATA BUG FIX CM9 Thanks to G-par
uploaded.to working in U.S. Solution. Thanks to TAL333
Now let the discussion begin
Cheers
honestly
wts the difference between z & j cm7 rom
apparently there're fewer bugs in z's rom
but everyone (including me just install j's rom)
anakinlam95 said:
honestly
wts the difference between z & j cm7 rom
apparently there're fewer bugs in z's rom
but everyone (including me just install j's rom)
Click to expand...
Click to collapse
One is CM7.0.3 and one is CM7.1 lol
Well J's rom is a build, while Z's rom is a port, and hence this is why Z's rom has far fewer bugs.
Can somebody post or pm me a working link to fxp030?
Thanks
big_raji said:
Can somebody post or pm me a working link to fxp030?
Thanks
Click to expand...
Click to collapse
There is no download link for FXP30 at the moment.
Read this for more info
and by the way, we are not allowed to make a mirror of J's ROM
FXP said:
PLEASE DO NOT MIRROR MY ROMS !
Click to expand...
Click to collapse
Cheers
Arnold.Alexius said:
There is no download link for FXP30 at the moment.
Read this for more info
and by the way, we are not allowed to make a mirror of J's ROM
Cheers
Click to expand...
Click to collapse
Ok, thanks for the info
plz show me a link on how to install fxp043 for x10i
plz post a link showing me how to install fxp043 for x10i
Anyone have their wifi working? i get "error" when i try to turn it on.
Heres what im running;
Android 2.3.7
Basband: 2.1.71
Kernal: 2.6.29-modFXP-DooMKernel-v05a-FS [email protected] #1
Mod Version: CyanogenMod-7.1.0-es209ra-KANG
Now i did install dooms wifi zip using CWM recovery and still nothing. This is a copy&paste from his post of the files i downloaded and installed..
for CM7-FXP ROM (and ROMS based on CM7-FXP ROM)
x10_FXP_DooMKernel-v05-FS.ftf (with CWM recovery integrated in kernel)
[ MD5HASH : 0c40335ccbb11524ca356a2918c7c73e ]
CM7FXP-DooMKernel-v05-FS_wifi_CWM.zip (can be flashed via CWM recovery)
Click to expand...
Click to collapse
jsehgal said:
plz post a link showing me how to install fxp043 for x10i
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=17998666&postcount=12446
Please credit to colossus for the guide.
cheers
Would you consider adding a changelog to the first page of the Development thread?
Thank you.
redfire2002 said:
Anyone have their wifi working? i get "error" when i try to turn it on.
Heres what im running;
Android 2.3.7
Basband: 2.1.71
Kernal: 2.6.29-modFXP-DooMKernel-v05a-FS [email protected] #1
Mod Version: CyanogenMod-7.1.0-es209ra-KANG
Now i did install dooms wifi zip using CWM recovery and still nothing. This is a copy&paste from his post of the files i downloaded and installed..
Click to expand...
Click to collapse
U have to flash wifi modules from xrecovery not from CWM recovery.
Sent from my Xperia X10 using Tapatalk
HELP!!!
I just wanted to reinstall FXP043, and I guess I have wiped bit too much.
Now when I try to install FXP from CWM recovery I get:
assert failed: getprop("ro.product.device") == "X10i" || getprop("ro.build.product") == "X10i"
and so on...
Any ideas hot to fix it? I tried to reinstall with stock, but SE Companion doesn't seem to work.
Ok. I've managed to recover my installation. But... I'd like to have fresh, clean FXP043. And now...
First I tried to reinstall update-cm-7.1.0-es209ra-KANG-signed and gapps with recovery.
I've ended up with nothing changed.
Then I flashed SE rom with SE Companion. Runed it once, flashed FXP kernel, installed update and gapps with CWM.
I've ended up with FXP043 hanging up on CyanogenMod logo.
So now... I have a choice. Either use SE stock rom, or FXP that I have backed up.
I'm desperate.
mpolanski said:
Ok. I've managed to recover my installation. But... I'd like to have fresh, clean FXP043. And now...
First I tried to reinstall update-cm-7.1.0-es209ra-KANG-signed and gapps with recovery.
I've ended up with nothing changed.
Then I flashed SE rom with SE Companion. Runed it once, flashed FXP kernel, installed update and gapps with CWM.
I've ended up with FXP043 hanging up on CyanogenMod logo.
So now... I have a choice. Either use SE stock rom, or FXP that I have backed up.
I'm desperate.
Click to expand...
Click to collapse
are you already unlocked your bootloader? and another question is are you already flash FXP tft file using flashtool? please follow colossus installation guide.
Z3US911 said:
U have to flash wifi modules from xrecovery not from CWM recovery.
Sent from my Xperia X10 using Tapatalk
Click to expand...
Click to collapse
Just tried that and nothing. Says Error when i try to turn it on.
Arnold.Alexius said:
are you already unlocked your bootloader? and another question is are you already flash FXP tft file using flashtool? please follow colossus installation guide.
Click to expand...
Click to collapse
Sure I did. I have FXP working, but I restored with titanium, so now I wanted fresh copy to eliminate possible bugs from programs.
Something strange happened on first time I tried to make it clean, and I couldn't install update zip. Finally I tried factory reset from CWM, and it worked fine. I've got fresh install, and... seems that data bug is gone for now.
Anyway, case closed.
mpolanski said:
Sure I did. I have FXP working, but I restored with titanium, so now I wanted fresh copy to eliminate possible bugs from programs.
Something strange happened on first time I tried to make it clean, and I couldn't install update zip. Finally I tried factory reset from CWM, and it worked fine. I've got fresh install, and... seems that data bug is gone for now.
Anyway, case closed.
Click to expand...
Click to collapse
Well how is your phone doing?
Is it still " data bug " free?
Hi. Why is there no bug on the locked bootloader port?
Sent from my X10i using Tapatalk
guys is there a way to install the latest sony ericsson launcher (2.1..., with the new folder) on fxp 45?
i tried per root explorer and cwm ( zip format not supported or so, worked fine with xrecovery on stock/wb).
any ideas?
thanks in advance
cikomiko said:
guys is there a way to install the latest sony ericsson launcher (2.1..., with the new folder) on fxp 45?
i tried per root explorer and cwm ( zip format not supported or so, worked fine with xrecovery on stock/wb).
any ideas?
thanks in advance
Click to expand...
Click to collapse
Flash it through xRecovery from DooMKernel
I used to update ROMs on my Motorola Defy, but I never had to reinstall Gaaps.
When you update PA, you have to reinstall Gaaps (if I have understand well), is it the same for ofther Nexus 4 ROMs ?
I'm really confused, thanks
PS: Do you still have to update ROMs using recovery (flash .zip) ? Or is there apps which do that ? I heard CyanogenMod have now an OTA update function, is it the same for PA ?
on most roms you do have to reflash the gapps after flashing the rom, unless the rom includes a script that saves them. but, it takes a few seconds to reflash the gapps anyways.
simms22 said:
on most roms you do have to reflash the gapps after flashing the rom, unless the rom includes a script that saves them. but, it takes a few seconds to reflash the gapps anyways.
Click to expand...
Click to collapse
Thanks, Do you have an idea why it's not included in PA ?
RaphaelH1427 said:
Thanks, Do you have an idea why it's not included in PA ?
Click to expand...
Click to collapse
most dont include it, since its just a matter of a few extra seconds of flashing.
RaphaelH1427 said:
Thanks, Do you have an idea why it's not included in PA ?
Click to expand...
Click to collapse
You could make your own script to save them if you wanted. It's not difficult. However, I think occasionally the PA devs modify the gapps with their own changes so that is why they don't setup a script to save them since you would need the new custom versions.
btw, you're better off flashing in recovery. apps that flash occasionally mess up. goo manager can be used to download and flash roms/gapps/kernels.
Ok thanks guys !
RaphaelH1427 said:
Thanks, Do you have an idea why it's not included in PA ?
Click to expand...
Click to collapse
Hi,
It's like on all custom roms (CM, AOSP, AOKP). If I remember right Google requested that the Gapps should not be included in the roms. It was at the time of my Gnex if I'm not wrong.
At a moment LiquidSmooth rom included the Gapps and they remove them due to Google policy.
Maybe a dev can reply... Need to confirm but there was an history about the request from Google to not include the Gapps but as a separate package.
EDIT: more information here: http://wiki.rootzwiki.com/Google_Apps
viking37 said:
Hi,
It's like on all custom roms (CM, AOSP, AOKP). If I remember right Google requested that the Gapps should not be included in the roms. It was at the time of my Gnex if I'm not wrong.
At a moment LiquidSmooth rom included the Gapps and they remove them due to Google policy.
Maybe a dev can reply... Need to confirm but there was an history about the request from Google to not include the Gapps but as a separate package.
EDIT: more information here: http://wiki.rootzwiki.com/Google_Apps
Click to expand...
Click to collapse
Thanks you rocks !
aLeda said:
I used to update ROMs on my Motorola Defy, but I never had to reinstall Gaaps.
When you update PA, you have to reinstall Gaaps (if I have understand well), is it the same for ofther Nexus 4 ROMs ?
Click to expand...
Click to collapse
As the guys above said, it's mostly a license issue. You cannot include Gapps in a product you launch as your own because unlike other apps like Messaging and Camera, Gapps are not exactly a part of AOSP; they are made by Google. The thing is, developers like the one for your Motorola Defy get away with adding gapps in their ROMs because they are unofficial builds of CM and Google cannot keep a check on all the ROMs out there. The same way the case for my Samsung Galaxy Ace.
For official builds, however, you always require Gapps package to be flashed separately because Google has an eye on the official ones.
rhoadster91 said:
As the guys above said, it's mostly a license issue. You cannot include Gapps in a product you launch as your own because unlike other apps like Messaging and Camera, Gapps are not exactly a part of AOSP; they are made by Google. The thing is, developers like the one for your Motorola Defy get away with adding gapps in their ROMs because they are unofficial builds of CM and Google cannot keep a check on all the ROMs out there. The same way the case for my Samsung Galaxy Ace.
For official builds, however, you always require Gapps package to be flashed separately because Google has an eye on the official ones.
Click to expand...
Click to collapse
Ok I understand better now thanks
Hi! Im trying to install the new CM11 dev builds for the Galaxy Y and I keep getting:
Code:
Installing update...
set_metadata_recursive: some changes failed
E:Error in /sdcard/cm-11-2014-05-28-EXPERIMENTAL-totoro.zip
(Status 7)
Installation aborted.
Any ideas. I'm installing it upon the CM9 build re recently got and upon that kernel.
its recovery issue.
How can I fix it then? I guess that much. :L
sorry but i have no permission to share something.
So, can I or cant I fix it...
Boncey said:
So, can I or cant I fix it...
Click to expand...
Click to collapse
you need to use the correct cwm recovery v6.x
for that you need the new kernel
But I dont know why you want to - its for devs only - its experimental - has a high risk of bricking your phone - and nothing on cm11 works yet other than it boots
If you are a dev and want to develop all the details are on the cm11 thread in the dev section but I repeat - unless you are a dev please dont not post there or flash anything on your device
marcussmith2626 said:
you need to use the correct cwm recovery v6.x
for that you need the new kernel
But I dont know why you want to - its for devs only - its experimental - has a high risk of bricking your phone - and nothing on cm11 works yet other than it boots
If you are a dev and want to develop all the details are on the cm11 thread in the dev section but I repeat - unless you are a dev please dont not post there or flash anything on your device
Click to expand...
Click to collapse
Thanks and yes I know. I like to try out the newest things, I'm not in any major need of my phone for a while so I can do whateva.
Could you link me to the new CWM Recov. and the Kernel?
Unfortunately the devs are not in favour of releasing these things as yet. -CALIBAN666- and marcussmith2626 had put up links and attachments for the files but have since taken them down at bieltv.3's request.
Try and understand, they as devs do not want to hard brick your phone with their work.
Until we get a beta, don't even try.
Boncey said:
Thanks and yes I know. I like to try out the newest things, I'm not in any major need of my phone for a while so I can do whateva.
Could you link me to the new CWM Recov. and the Kernel?
Click to expand...
Click to collapse
their website is
http://androidarmv6.github.io/
Its a public website that is freely available via a google search so there is no permission required to post a link to it
Since it contains no advertising or is used for commercial profit to make money from xda users me posting it here does not violate xda rules
Where you go from there is entirely your choice
Hey there, proud owners of Redmi Note 3 Pro. Since, there are two cm13 variants, both currently under development, so I decided to start this thread, to compare both variants and help other users to decide which to flash. And, if they mess up or want to revert back or any other problem occurs, help them and guide them through the whole process.
I want other people to participate to and list the pros and cons of both the roms with their respective version name. It will help others to decide better about which rom to flash and all.
WARNING: By flashing the new/updated firmware, you might have trouble going back to miui7 based on 5.1.1. I tried flashing fastboot stable rom, and I was having wifi, no sime, etc issues. And when flashing CM13 again, the issue were resolved. This is because of the firmware change.
For those who are also having no sim/wifi issues on miui7 after flashing fastboot or recovery rom, do not immediately come to confusion that you have lost your imei or efs partition, try going back to CM13 to check whether the issues still exist or not.
ADVICE: Make a complete backup of your miui rom using twrp alka. NOTE: Official twrp will not help you create the backup of every single patition, so please download and flash twrp alka as your recovery. Even if you don't want to make a backup, I ADVICE you to backup atleast efs partition, it may come handy later.
Nope...You can restore the splash image from your previous mm backup to get MI spalsh image. eace:
Sent from my Redmi Note 3 using Tapatalk
CM13 by Santhosh M
Build date: 17 - 06 - 2016
1. Minor bluetooth related bugs.
2. Slow gps. But it works.
3. Some force close issues.
4. LED notification settings error. Led are working, only they seems to ignore the manual settings.
5. Other small things i may have not noticed.
There may or may not be camera force close, the patch for it is uploaded right below the downloading link in his thread. Everything thing else seems to be fine. The firmware/radio is from a leaked source and thus a bit unstable and may cause some problems. If it causes problems, flash some other Android M based radio for redmi note 3 pro. Make sure not to flash radio from some other device, you may end up getting bricked or loosing your imei.
HTML:
http://forum.xda-developers.com/redmi-note-3/development/rom-cyanogenmod-13-0-xiaomi-redmi-note-3-t3350656
Build by banmeifyouwant & thestrix
Build date: 19 - 06 - 2016
Bugs:
1. Wrong bluetooth address and mac address.
2. Some bluetooth services that i may have not noticed.
3. Some force close issues that can be solved by wiping the data/cache of the app or cache from recovery.
The rest seems be good. GPS working. Voice recognition in google app working. No com.android.phone force close. No music force close. If you have some problems, then flash the radio package after flashing the rom.
HTML:
http://forum.xda-developers.com/redmi-note-3/development/cyanogenmod-13-t3398789
Another bug in cm ROMs. Music app force closes if u have more than 250+ songs listed in ur music app.
Just tested by me. I had more songs and I was getting FCS. Just to verify, I created .nomedia file in some folders and music player plays well.
Some one needs to fix it. I tested with cm13 by banmelfyouwant and mokee.
Sent from my SHIELD Tablet using XDA-Developers mobile app
srihari210 said:
Another bug in cm ROMs. Music app force closes if u have more than 250+ songs listed in ur music app.
Just tested by me. I had more songs and I was getting FCS. Just to verify, I created .nomedia file in some folders and music player plays well.
Some one needs to fix it. I tested with cm13 by banmelfyouwant and mokee.
Sent from my SHIELD Tablet using XDA-Developers mobile app
Click to expand...
Click to collapse
I have exactly 589 songs and no fc in music app. If you are having fx, clear cache and dalvik and then try again.
This thread is not in the correct section.
Polls, Guides, Tips and Tricks should reside in General category.
Please refrain from creating such threads in the development section.
I have been noticing a lot of such threads here.
Cheers.
dagger said:
This thread is not in the correct section.
Polls, Guides, Tips and Tricks should reside in General category.
Please refrain from creating such threads in the development section.
I have been noticing a lot of such threads here.
Cheers.
Click to expand...
Click to collapse
Sorry about that, i am new at XDA and thus didn't knew on which section to post this, so i just posted it under snapdragon section. I didn't know this section was reserved for just development reason only.
Even Flour_Mo rom is highly stable with everthing working
http://www.miui.com/thread-4341855-1-1.html
June 7 build
What are the bugs in Santhosh's build?
Does GPS work in his build?
jain_pranav said:
What are the bugs in Santhosh's build?
Does GPS work in his build?
Click to expand...
Click to collapse
Yes gps works, but somebody complained that it was slow in his latest built 17
I have been using banmeifyouwant build. It's very smooth but GPS is an issue for me. Will be shifting to Santhosh's build now.
archit.bajpai.ab said:
Yes gps works, but somebody complained that it was slow in his latest built 17
Click to expand...
Click to collapse
The BanMeIfYouWant build would crash/reboot when I tried to use the gps for navigation.
I switched back to Santhosh's latest and the gps was slow. It wouldn't lock at first, but after 5-10 minutes I was able to connect and haven't had an issue connecting since.
Santhosh's build is more stable in my opinion, so that's what I recommend.
Yaranaika said:
The BanMeIfYouWant build would crash/reboot when I tried to use the gps for navigation.
I switched back to Santhosh's latest and the gps was slow. It wouldn't lock at first, but after 5-10 minutes I was able to connect and haven't had an issue connecting since.
Santhosh's build is more stable in my opinion, so that's what I recommend.
Click to expand...
Click to collapse
Can you list all the pros and cons of that rom here. It would really help other to know what they will get when they flash
archit.bajpai.ab said:
both the roms use MM bootloader
Click to expand...
Click to collapse
I use the userdebug bootloader form the leaked CAF rom. :silly:
jain_pranav said:
What are the bugs in Santhosh's build?
Does GPS work in his build?
Click to expand...
Click to collapse
Yeah his build is very much stanle. The only downgrade is that you will lose 4k recording that is only available in banmeifyouwant built
archit.bajpai.ab said:
Yeah his build is very much stanle. The only downgrade is that you will lose 4k recording that is only available in banmeifyouwant built
Click to expand...
Click to collapse
No, 4K recording also working on another CM13 ROM, it's made by TheStrix and you know, he's currently working with our device for the real Official CM13.
MOVZX said:
No, 4K recording also working on another CM13 ROM, it's made by TheStrix and you know, he's currently working with our device for the real Official CM13.
Click to expand...
Click to collapse
Glad to hear. I still can't understand why banmeifyouwant a d santhosh are working seperately for the same goal. Shouldn't they be working together for the official cm13, that way the updates will be made faster.
banmeifyouwant said:
I use the userdebug bootloader form the leaked CAF rom. :silly:
Click to expand...
Click to collapse
So, you rom is technically not using the mm bootloader, instead its more like custom one.
And one more thing. Why you and santhosh are working differently on the same rom. Wouldn't it be better to merge both and hence release a more better rom. If you both can work diiferently and create such a rom in a nich of time, then if you work together, you both can create a perfectly stable rom in no time.
MOVZX said:
No, 4K recording also working on another CM13 ROM, it's made by TheStrix and you know, he's currently working with our device for the real Official CM13.
Click to expand...
Click to collapse
Where did you get this build?
Sent from my kenzo using Tapatalk
Sorry, this thread is now closed.
I would suggest you to move this thread to the General Disucssion section
Moved.
well I think I found a bug so twrp thinks there is no os installed and the browser doesnt work and when you try to flash gapps for 7.1 it doesnt work how do we fix this
williambright80 said:
well I think I found a bug so twrp thinks there is no os installed and the browser doesnt work and when you try to flash gapps for 7.1 it doesnt work how do we fix this
Click to expand...
Click to collapse
For which ROM u talking about?? Aosp espressos'
Kunal Gautam said:
For which ROM u talking about?? Aosp espressos'
Click to expand...
Click to collapse
yes
TWRP :-OK it isn't that severe to be called a bug
GApps:- I know its a problem with the ROM that it doesn't deal with opengapps but still you can try PA GApps they are working fine with the ROM.
Thanks
Kunal Gautam said:
TWRP :-OK it isn't that severe to be called a bug
GApps:- I know its a problem with the ROM that it doesn't deal with opengapps but still you can try PA GApps they are working fine with the ROM.
Thanks
Click to expand...
Click to collapse
which gapps
link me to 7.1 ROM you promised, ty.
Boscep said:
link me to 7.1 ROM you promised, ty.
Click to expand...
Click to collapse
here is the link to 7.1 https://builds.unlegacy-android.org/aosp-7.1/espresso/ua_espresso-7.1.1-20170227.zip
Is this for pad 2 gt-p5100
JPSimon said:
Is this for pad 2 gt-p5100
Click to expand...
Click to collapse
Yes but to avoid confusion please call it by galaxy tab 2 10.1
hello @CCD
how are you?
comeback pls
tab 2 needs more dev, ty.
UPDATE 2.0
Builds are almost ready CM 14.1 once my exams are completed will start to test them.... Dont know why but still camera bug carry on almost no lags..... + CyanogenMod Features....
JPSimon said:
Is this for pad 2 gt-p5100
Click to expand...
Click to collapse
It could be but right now i haven't updated my device tree
For P3100's right now but i will do it soon but it could be faster if you could help me updating
williambright80 said:
which gapps
Click to expand...
Click to collapse
Sorry my mistake PA Gapps are now discontinued instead of them you could download dynamic gapps
Link-https://forum.xda-developers.com/android/software/gapps-dynamic-gapps-t3487192
Kunal Gautam said:
Introduction
At the end of 2016 I started to seek nougats for Tab 2, found AOSP by Ziyan and Android - Andi
flashed it, examined it, Discontinued it......
Here we gonna discuss it.
What is the need?
Tab 2 was released in 2012 and in mid 2014 was discontinued by Samsung thus resulted to get this to be called OLD but in my eyes its still new with great potential and great reliability so I just want to keep this device alive till 2019. So that's the reason....
CURRENT STATE
Nougat development is doing well and with the help of you I can or all devs can make it better.....
So just because of this learned porting and started porting, successfully ported 4 out 5 ROMs will upload them all......
DEVELOPING CIRCLE
Roms that are being supported by me are :-
AOSP
Lineage OS
AICP
Resurrection Remix
Thanks To @[email protected]
SlimKat Roms
CyanogenMod
LineageOS
You
Me of course
Click to expand...
Click to collapse
So hey, i'm nee to this forum and rooting in general but i will glad if some of you could help me out of this, here's the deal: i saw that AOSP roms are the best for performance (right?) and i also want the lastet version of android so that rom fit perfectly my needs, where i can download it? And is compatibile with my tab 2 10.1 WiFi only? Also where the hell is the guide to root that Device, i saw it once and i never found it back... (yeah i'm probably stupid)
LordReaperIV said:
So hey, i'm nee to this forum and rooting in general but i will glad if some of you could help me out of this, here's the deal: i saw that AOSP roms are the best for performance (right?) and i also want the lastet version of android so that rom fit perfectly my needs, where i can download it? And is compatibile with my tab 2 10.1 WiFi only? Also where the hell is the guide to root that Device, i saw it once and i never found it back... (yeah i'm probably stupid)
Click to expand...
Click to collapse
No need for guide
Steps
1. Download KingRoot.
2. Install it.
3. Root your device with it.
4. Enjoy
TO INSTALL CUSTOM RECOVERY TO INSTALL CUSTOM ROMS
1. Download official TWRP app from the Play Store.
2. Install recovery using the information on the screen.
INSTALL THE MODDED RECOVERY PLZ IF YOU DONT WANT TO GET YOU DEVICE BRICKED
1. Go to google search andi github
2. Open it
3. Go to the recovery section and then in TWRP download the common recovery and install the downloaded recovery using the current TWRP recovery
And AOSP are good but actually for Tab 2 it is really unstable right now. But if you really want to install it
Just go in the Tab 2 Development section
The AOSP must on top there will be links to the website
Just go to directory when you visit downloading website
AOSP 7.1/espresso/Download the latest one
And just copy to you device
Then go to the recovery (Power + Volume Up)
Then go into wipe/anvanced
Select
1. DALVIK
2. CACHE
3. SYSTEM
4. DATA
Then wipe
Then install the Rom
TADA Done than just reboot.
Kunal Gautam said:
No need for guide
Steps
1. Download KingRoot.
2. Install it.
3. Root your device with it.
4. Enjoy
TO INSTALL CUSTOM RECOVERY TO INSTALL CUSTOM ROMS
1. Download official TWRP app from the Play Store.
2. Install recovery using the information on the screen.
INSTALL THE MODDED RECOVERY PLZ IF YOU DONT WANT TO GET YOU DEVICE BRICKED
1. Go to google search andi github
2. Open it
3. Go to the recovery section and then in TWRP download the common recovery and install the downloaded recovery using the current TWRP recovery
And AOSP are good but actually for Tab 2 it is really unstable right now. But if you really want to install it
Just go in the Tab 2 Development section
The AOSP must on top there will be links to the website
Just go to directory when you visit downloading website
AOSP 7.1/espresso/Download the latest one
And just copy to you device
Then go to the recovery (Power + Volume Up)
Then go into wipe/anvanced
Select
1. DALVIK
2. CACHE
3. SYSTEM
4. DATA
Then wipe
Then install the Rom
TADA Done than just reboot.
Click to expand...
Click to collapse
Awesome dude, thanks for the tips, i'll wait that my tabet charge will be over 80% (just for safety) and the i'll root it. I downloaded both ".tar.md5" and ".zip" file but when i go to choose the file with TWRP in the directory that i put them, the app explorer don't see them... -> update, the TWRP app let me see only the 2..8.5.0 version of recovery, while the site on github start from 3.x.x.x. also i tried to flash the img files extracted from the 3.x.x.x. recoveries and it told me "flash failed".
Also my Galaxy Tab 2 just crashed while rooting with Kingroot (it was trying the could method) -> EDIT: i reset it and when i open the kingroot app it start from where it left , it was a "crash" because the stock rom have not the reboot function?
BTW i thought, you said that galaxy tab 2 is unstable, but i remember that the first stock rom was very well optimized with no lag, then i updated it via samsung and then it come to lag and IT IS VERY SLOW. so you mean that installing a custom rom will not solve the problem?
[b]"need alpha testers for cm 14.1"[/b]
Alpha testers wanted for CM 14.1
1st Build releasing today.. Stay Tuned!!!