Hi,
Hoping someone may be able to help me please. Have had my S5 for 8mos, it's an unlocked Rogers phone on Bell network, working well. Recently bought new car, 2014 Civic EX, and trying to use "car mode."
When bluetooth not in use, it works great... voice command "Hi Galaxy" wakes it up, voice activated messages/calls sent/placed seamlessly. But, as soon as I connect to bluetooth device, it doesn't work! At first thought it was something to do with bluetooth system in my car, but connecting to my old blueant headset does same thing, as does connecting to my friend's car.
Saying Hi Galaxy will change the display to speak now with red mic symbol, but the audible beep that prompts you to say voice command is absent, and the phone doesn't recognize any voice commands at all. After ~ 4 seconds, the display reverts back to say "Hi Galaxy." I have looked through all settings I could think might have an impact on it's function, but can't get it to work.
Thanks very much for any help or insight.
Morvy
Related
Wondering if anyone has had this problem. I haven't pinned a time down yet. I use a motorola car kit. It will disconnect and end the call for no reason. Is there a timer to auto disconnect in the bluetooth stack? Any help is appreciated.
approx 4minutes or less
I was having a problem w/mda and bluetooth and sometimes without bluetooth, in that the entire network would just drop when the call gets close to 4 minutes.... I called tmo about it and they simply gave up and said maybe its the phone...so they sent me a replacement mda, used it today during one call and couldn't believe that the call lasted longer than an hour...
Mine is only with bluetooth. I guess a little more info is needed. If I hit the voice dial button on my car kit I get the voice command tone. I have also used bluetooth to play music over the car kit with the voice command controls(just for fun, horrible quality). It will disconnect while it's playing music no call involved. I have a feeling it's the bluetooth connection timing out but I'm not sure. It's frustrating.
so its not happening during phone calls???
see there might be a bluetooth timeout that tmo doesn't know about...I have to use bluetooth and it seems like every 4min or less it blanks out everything and sometimes I even have to re pair the two devices.... I would try making calls and using the bluetooth w/o car kit...mine did some of the samethings like streaming music thru bt headseat and it would blankout with that also even when not on a call..
Car Kit Not Staying Paired???
I guess I wasn't clear. It happens in both situations. I think i have to re-pair after as well. As far as I know it doesn't stay paired. When a call comes in I usually have to wait about 2 rings before it rings through the car kit. Also when I make a call by hitting the voice dial button on the car kit the blue light blinks for about 2 seconds then I get the voice command sound. I assume that the blinking is it re-pairing. I guess I need info on how to keep it paired.
Anyone? I have found that time dosen't seem to be a issue as it has done it a 1min 43 seconds and 2 mins 38 seconds.
GreggSymington said:
Wondering if anyone has had this problem. I haven't pinned a time down yet. I use a motorola car kit. It will disconnect and end the call for no reason. Is there a timer to auto disconnect in the bluetooth stack? Any help is appreciated.
Click to expand...
Click to collapse
Try turning on the bluetooth first while your phone is off. Once the bluetooth is on, then turn on your cell phone. I tried many times in frustration why it is saying "phone is disconnected" looking for problems. Then it works now and even the phone book in my Nokia and Garmin GPS. Hope it helps you too.
Turn on bluetooth device first while the cell phone is off. Once bluetooth is on, then turn on the latter. Hope it works. Do it everytime you use bluetooth device in your car.
Hello
I am trying to get my Hero to connect with my Lexus RX400h's bluetooth car-kit. I can pair the Hero with the car but it will not reconnect. Is there a way to authorize the Hero to alway reconnect without having to re-pair?
Any help would be great.
Thanks
Jon
It should remember it. I've never had a problem with my own bluetooth kit.
I get paired but not connected with my thb bury kit there are lots of posts on here about bluetoth issues 5 series bmws also have problems, htc support say they are waiting for an update from google
I'll add the Range Rover Sport to the list of cars with bluetooth issues.
I can connect OK, but as soon as the phone is connected it disables the phone keypad on the car dashboard so I can't use it to access voicemail and other menus.
Worked fine with my Diamond and Touch HD
Toyota TNS 510 carkit wont work either. It pairs ok, it even pairs the A2DP system. When pairing is finished a little message appears on the phone saying there was a problem with the bluetooth handfree thingy.
andy2111 said:
I'll add the Range Rover Sport to the list of cars with bluetooth issues.
I can connect OK, but as soon as the phone is connected it disables the phone keypad on the car dashboard so I can't use it to access voicemail and other menus.
Worked fine with my Diamond and Touch HD
Click to expand...
Click to collapse
What model year is your RRS ? My MY08 D3 works fine with the Hero... contact list navigation is far better than my 'old' Nokia N85. If your RRS is pre MY2008 there is an ECU update for the Bluetooth PTI I believe.
I'll add a Jaguar XF to the list. Hero will pair ok, then it will disconnect. it will disconnect a few times before it settles down. Whenever it tries to auto-connect, it will disconnect 2 or three times before it stays connected. sometimes it wont connect at all, a quick disable, then re-enable of bluetooh on the hero then gets it to connect again.
Didnt have any problems with any BlackBerry's, Touch Diamond, Nokia e52. Looks like we're waiting on Google for a fix. I wonder if their continual beta policy applies to updates as well as full blown applications?
Peugeot 407 SW ('07)- Pairing okay, connects okay too. On phone call the radio is muted, call picked up (on incoming), but the sound keeps coming through ear piece for 4-5 sec and then it eventually switches to speakers.
HTC cust support not very supportive... pointing me to go to the car manufacturer for support... :s
The Hero and/or Android does not support the bluetooth stack's remote Sim Access Profile (rSAP/SAP) required by many car kits (VAG, Lexus etc.). This might be the issue here.
http://en.wikipedia.org/wiki/Bluetooth_profile#SIM_Access_Profile_.28SAP.2C_SIM.29
Let your car do the pairing
Turn bluetooth on your phone and let your car discover and pair with the phone. Your carkit will suggest the passcode enter it in you phone and not the other way arround. That might work, It did for my Porshe.
How do you transfer bluetooth contacts??
Hi. I have my bluetooth car kit working fine, it is with a pioneer head unit. At first i would have to manually connect it, as the phone can only be made visible fo 120 seconds. Hoever after doing this 5 or 6 times, it then automatically conected every time. Just keep trying and see if it eventually does it.
Also.... How do you transfer your contacts lists to the bluetooth device?? I cannot find anyway!! please help!!
No Go on the Mazda 3
just bought a 2010 Mazda 3 sport and the bluetooth does not work with hero.
it pairs with the phone and then occasionally connects. however when you dial a number by voice or keypad the system in the car locks up completely for about 4 mins. tried other phones and works perfect.
Strange thing is it did work once for a day but then went all haywire after that.
would rooting the phone and installing a different rom open up the bluetooth any more so it can communicate better.
Dont want to get rid of the phone but unless i can find a remedy im gonna have to get a different phone.
I have Lexus ES350 2007, It's paired and auto connect with no issue! I have a tiny issue with incoming call in navi screen it display "not supported" instead of caller name!
Also it ringing in my Hero for 4 seconds then it ringing in my car?!
Thanks
Sorted
Well ive sorted th bluetooth problem.
once paired as long as i dont turn off bluetooth on the phone then it connects / reconnects just fine. if i do turn bluetooth profile off then when pairing i need to make phone visible before i get in the car and it picks it up again.
sorted.
2010 Mazda 3 and HTC Hero Bluetooth
Have the exact same problem as Wingy999 and if I leave the bluetooth switched on on the phone I have no problem.
But if I do switch it off/restart the phone, even if I make the phone visible when I get in the car, it does not connect and I have to delete and repair the phone to the car.
Can you help wingy999?
Yes/No
Well its a case of Yes it is and No it isnt.
Sometimes, for a few days i have no problems with phone. Then for no reason it decides to connect (picture of the phone on dash) but it cant communicate with the car. So when you dial it just hangs the system.
Got sick of pairing it to be honest so have left it for now. i wondering if rooting the phone might be a way forward.
yeah, no clue if rooting will help, but im def waiting for it to be possible. lots of cool things that can be done.
the bluetooth problem is to do with the android bluetooth api itself from what i understand. google haven't figured it out entirely yet and so only released it with basic functionality. even once modders are able to get inside the cdma hero, i dont think they can get at the low level bluetooth functionality and make changes. I could be wrong, but if it were the case, we'd see things like obex object transfer available on the GSM Hero's already.
I also have the same problem with my 2010 Mazda 3 and my sprint HTC hero.
I am probably going to have to return the phone. I was hoping for an update or a fix.
It is critical that the bluetooth feature works.
Another annoyance is that I cannot turn the bluetooth streaming audio. Even though the car and phone both have this feature, I do not want it on. I want to be able to turn on bluetooth for phone but not bluetooth streaming audio.
The HTC touch pro 2 (windows mobile) could turn each of the 2 bluetooth services off independently (and worked for both), the HTC Hero does not allow this (and doesn't work with the car anyway).
Huge thumbs down for an otherwise great phone.
My issue is with a Jabra SP700 Bluetooth speakerphone. My phone is paired, is detected and the phone even says 'Bluetooth Headset Connected'.
However, sound is not routed to the speakerphone, it just comes out of the phone speaker...
FYI I'm running MCR 2.8.
BMW 1 series 08 and HERO
Before I buy an HTC Hero does anyone know if it will work with my BMW 1 series
Hi all. I need some expert help. I am not as technical, but I am willing to try. My son helped me get the MX quad as I wanted a high end Android that I could hold in one hand to replace my ageing Samsung Vibrant. I got the phone a few days ago, and it will not connect properly to my motorola H730 bluetooth earpiece. It will receive, but not allow me to make calls with the earpiece. I get a double beep when I try to press the button to dial by voice on the earpiece. I can hold the button and get it to redial only. Bluetooth and voice dialing is a must as I am on the road a lot. No problems with my headset and my Samsung Vibrant, any ideas? When connected the bluetooth settings states "connected to phone audio"
PLEASE HELP Thanks
Note--for what it is worth when the phone and earpiece auto paired, although the bluetooth device prompted for the 0000 code, before I could enter it the earpiece announced that it was connected and the phone indicated that it was paired and connected.
Wish I could tell you what's wrong there but I can't.
Have you tried asking the folks over at the official Meizu forums yet?
I've seen a bunch of bluetooth related discussions there.
Bluetooth issues
MrColdbird said:
Wish I could tell you what's wrong there but I can't.
Have you tried asking the folks over at the official Meizu forums yet?
I've seen a bunch of bluetooth related discussions there.
Click to expand...
Click to collapse
I might not be at the correct Meizu help forum. Which one should I contact? I contacted one and received several replies that the phone does not support voice dialing and to download an app. I had already downloaded Vlingo, which works, but requires touching the phone--so not really handsfree, and not really through the bluetooth. Am I incorrect in expecting a phone running ICS with bluetooth 2.1+EDP to be able to both receive calls via bluetooth and initiate calls thru voice dilaing via bluetooth? I read all the reviews before I purchased from HK, and no one indicated that bluetooth only received calls. I can live with the other limitations as I am not a real customize, nerdy type; but I do need my bluetooth to phone home when I say so!!!
forum.meizu.com ?
Hi,
Sorry if this has been asked but I couldn't find an answer.
Is there a way to get S-Voice working when the screen is off and locked with a pattern/pin using a bluetooth headset? When I press the call button on the bluetooth headset to activate voice commands to the phone, I can't get S-Voice to work. It seems like the call button wakes up the phone. S-Voice works when I put the phone near me and just say "Hi Galaxy", but I would like to say "Hi Galaxy" through the bluetooth mic. I've tried 4 different pairs of bluetooth headset, but they all don't work with S-Voice. Is there a setting I'm missing? Any way of getting around this? Or is there a bluetooth headset that will work with S-Voice when the phone is locked?
Thanks
Hi All
I have installed the Poland 6.0.1 Rom on my Note 4 and everything seem to be working correctly
When I connect my phone to my Car (Ford Ranger 2016 model) its sync's correctly, downloads the phonebook and everything. I can even from the car make a call and it pushes it to the phone correctly as the phone initiates the call and connects the call when they pick up.
The problem is that there is no audio on the speakers. I can mid call select speaker (on the phone) and can then have a conversation with someone over speaker phone but when I push it back to Bluetooth there is no audio.
This worked 100% on 5.1.1 but since the update to 6.0.1 I cannot hear anything on the car speakers even though all the other functions work correctly.
Is this something that can be fixed?
Did you factory reset after upgrade?
nemesis.sisemen said:
Did you factory reset after upgrade?
Click to expand...
Click to collapse
Yes I did. I factory reset just now and tried using it without installing any apps. I can steam music fine. Its just when you make a call that there is no audio. Everything else seem to be working perfectly. I can scroll the address book I can choose and change music, I can place calls with the exception that there is no audio when on a call.....
Did you go to bluetooth settings
nemesis.sisemen said:
Did you go to bluetooth settings
Click to expand...
Click to collapse
Yes I did and both Music and Phone is enabled for it.
I might have the same issue
Hi.
I think this is a general problem plaguing this update.
I have Plantronics E50 Headset. Worked great with 5.1.1.
I use headset as hands-free and usually place calls by holding button on headset for 2 seconds and then issuing voice command "call <contact name>".
This is not done via S Voice but via standard Google app voice.
Like said, all worked great, no issues in 5.1.1.
What I get now after the update to 6.0.1(also Poland 910C, yes, I wiped all after update, but still same behavior), is that I can place calls using the headset + Voice command ("call <contact name>") and I get two outcomes:
1. if phone is unlocked(even if screen is turned off), call is placed, I get audio in the Bluetooth headset - normal behavior.
2. if phone is locked(either auto-locked after timeout and screen off, or locked after pressing power button), call is placed after voice command, but audio remains on the phone and is not transferred to Bluetooth. I need to pick up the phone and talk from it, or press the "bluetooth" button on the dialer window.
Strange is that if I pick up the phone, while locked, and place a call using emergency/favorites contacts, I do get audio in the Bluetooth headset every time.
Problem is that hands free is not usable anymore, since you need to do something on the phone after placing the call.
I think that in your case, call being placed via car Bluetooth system, the thing should be the same.
What I can suggest is to try and see if this works in your case when phone is unlocked.
Anyway, Samsung screwed up something either related to the Phone app, or related to the lock-screen... or both
Solution would be to go back to 5.1.1 or wait for next update, hoping that Samsung fixes this...
Cheers!
ghisisan said:
Hi.
I think this is a general problem plaguing this update.
I have Plantronics E50 Headset. Worked great with 5.1.1.
I use headset as hands-free and usually place calls by holding button on headset for 2 seconds and then issuing voice command "call <contact name>".
This is not done via S Voice but via standard Google app voice.
Like said, all worked great, no issues in 5.1.1.
What I get now after the update to 6.0.1(also Poland 910C, yes, I wiped all after update, but still same behavior), is that I can place calls using the headset + Voice command ("call <contact name>") and I get two outcomes:
1. if phone is unlocked(even if screen is turned off), call is placed, I get audio in the Bluetooth headset - normal behavior.
2. if phone is locked(either auto-locked after timeout and screen off, or locked after pressing power button), call is placed after voice command, but audio remains on the phone and is not transferred to Bluetooth. I need to pick up the phone and talk from it, or press the "bluetooth" button on the dialer window.
Strange is that if I pick up the phone, while locked, and place a call using emergency/favorites contacts, I do get audio in the Bluetooth headset every time.
Problem is that hands free is not usable anymore, since you need to do something on the phone after placing the call.
I think that in your case, call being placed via car Bluetooth system, the thing should be the same.
What I can suggest is to try and see if this works in your case when phone is unlocked.
Anyway, Samsung screwed up something either related to the Phone app, or related to the lock-screen... or both
Solution would be to go back to 5.1.1 or wait for next update, hoping that Samsung fixes this...
Cheers!
Click to expand...
Click to collapse
Yes the same behavior on the Car audio system as you describe except that the audio system regardless of how the call originates from says "Privacy Mode Enabled" and you cannot hear anything or they hear you until you disable the Bluetooth or enable the speaker (that disconnects the Bluetooth)
I have downgraded to 5.1.1 official for my country and yesterday while driving home on the phone with my wife mid call it cut the voice and enabled "Privacy Mode". I could not call again or receive calls over the Car Audio and it persisted even after I rebooted the phone, Turned the radio on and off and even unpaired the phone and paired it again. The call regardless of where of how its made directly goes into "Privacy mode" and you cant disable it
I got home and turned the car off and on again and only when the audio system completely reset after pairing the phone again it could make calls from the phone and car without defaulting to the "Privacy Mode"
Dis is definitely a Android issue with the calling as its a feature in Android and not on the car audio. Music streaming works flawlessly that use the same Bluetooth connection. Its just on calls that it does this and at random