First let me start off by saying I am not responsible for YOU unlocking your boot loader and then flashing something that blows your phone up so please do all this under your OWN supervision haha.
NOW..
I have used this method sucsesfully on about 8 ultras now and works every time as long as steps are followed correctly.. If something does not make sense just ask instead if saying how it does not work.. See screen shots below of proof thanks
THIS MAY WORK ON ALL MOTOROLA DEVICES BUT DONT QUOTE ME ALLTHOUGH I HAVE ALSO DONE THIS ON A AT&T MOTO X AND A AT&T/CRICKET MOTO G BOTH FIRST GENS.. AND BOTH ON 4.4.4
1 use chrome
2 when you copy your key from fastboot make sure you copy ONLY I repeat ONLY the spaces that contain the numbers all the way to where the last line of 7 zeros remains that's it don't copy any extra spaces at all if you do it won't work and you'll have to start over DO NOT COPY THE LAST 7 ZEROS TYPE THEM IN MANUALLY
3 paste the number you copied from fastboot into the box on Motorola
4 type in the remaining 7 zeros manually
5 DO NOT FORGET THIS PART go through the number that has been now imputed into the box and make sure that there is no spaces in it BECAUSE I PROMISE YOU THERE IS AT LEAST 3
6 IMPORTANT when you feel like you have the number entered correctly DO NOT PRESS CHECK TO SEE IF MY DEVICE IS ELIGIBLE DO NOT DO NOT DO NOT DO NOT.. go down to the bottom click accept and hit enter and then something will pop up on the screen that will say this will void your warranty PRESS OK now you should be able to continue normally to unlock the boot loader
If for some reason you get any error codes like 404 or whatever you need to clear all your history and catch and stuff and try again REMEMBER THIS ONLY WORKS WITH CHROME FOR SOME REASON.
LINKS TO MINIMAL ADB/FASTBOOT AND MOTOROLA'S WEBSITE
MINIMAL ADB/FASTBOOT
http://forum.xda-developers.com/showthread.php?t=2317790
MOTOROLA'S WEBSITE
https://motorola-global-portal.custhelp.com/app/standalone/bootloader/unlock-your-device-a
Sent from my XT1080
could you maybe provide some links to the motorola where you can do this? and what number you're talking about? there's like at least 4 different numbers..
I've tried this a few times now and only get 404 error
darthdave said:
could you maybe provide some links to the motorola where you can do this? and what number you're talking about? there's like at least 4 different numbers..
Click to expand...
Click to collapse
Yes give me a few and I'll edit it and the numbers are the key that adb and fastboot generate
Sent from my XT1080 using XDA Free mobile app
calarco3 said:
I've tried this a few times now and only get 404 error
Click to expand...
Click to collapse
I noticed it happens when you try a lot make sure you clear all your catch and everything and keep trying if it still happens let me know also try restarting the computer
Sent from my XT1080 using XDA Free mobile app
no luck with that technique
Links added
Sent from my XT1080 using XDA Free mobile app
calarco3 said:
no luck with that technique
Click to expand...
Click to collapse
That's weird what are you trying to unlock I've done a bunch with it also what kinds computer are you using and are you signing in with google or Motorola on the website?
Sent from my XT1080 using XDA Free mobile app
Droid turbo, win 7, Google
sent from my handcuffed droid turbo
calarco3 said:
Droid turbo, win 7, Google
sent from my handcuffed droid turbo
Click to expand...
Click to collapse
I've never tried it with a turbo
Sent from my XT1080 using XDA Free mobile app
androidreviewguy said:
I've never tried it with a turbo
Sent from my XT1080 using XDA Free mobile app
Click to expand...
Click to collapse
I just tried something a bit different with the Moto X 2014 and I am still getting the 404 error.
After typing in the unlock data I received in fastboot, I scroll down and click the radio button on I agree. Then right click and select inspect element. I can see the HTML code for the button to appear for request unlock code. I edit noshow to show and remove disable and the button appears. Still when I click it I get the 404 error. But at least I can make the button appear.
JulesJam said:
I just tried something a bit different with the Moto X 2014 and I am still getting the 404 error.
After typing in the unlock data I received in fastboot, I scroll down and click the radio button on I agree. Then right click and select inspect element. I can see the HTML code for the button to appear for get unlock code. I edit noshow to show and remove disable and the button appears. Still when I click it I get the 404 error. But at least I can make the button appear.
Click to expand...
Click to collapse
That originally was happening to me and and I was doing the same thing you are doing and it was showing that it was in fact working but something was blocking it giving me the error and then one day it just stopped doing it and it worked from then on if people continue to have the issue I may do em for everyone on my free time
Sent from my XT1080 using XDA Free mobile app
If you guys are getting an error send me your code and via pm and I'll give it a try for you also and if it works I'll send you your code
Sent from my XT1080 using XDA Free mobile app
Please help me unlock the bootloader~~~
androidreviewguy said:
If you guys are getting an error send me your code and via pm and I'll give it a try for you also and if it works I'll send you your code
Sent from my XT1080 using XDA Free mobile app
Click to expand...
Click to collapse
I've tried this a few times but just 404 error.
This is my code without the last 7 zeros
9900049602667400#5441363236304250414700000000000000000000#EEBC2AD0F2E99048148235D6C68FED0DDD7D544C#A64C5C050C000100000000000
full code:
9900049602667400#5441363236304250414700000000000000000000#EEBC2AD0F2E99048148235D6C68FED0DDD7D544C#A64C5C050C0001000000000000000000
This is my email: [email protected]
Whatever it would work or not, but thank you for your help!
I will get around to all of your pms throughout the week and try for you guys idk why it would only work with me but if that's the case I'll do it for everyone over time
Sent from my XT1080
androidreviewguy said:
I will get around to all of your pms throughout the week and try for you guys idk why it would only work with me but if that's the case I'll do it for everyone over time
Sent from my XT1080
Click to expand...
Click to collapse
Waiting for your good news.
I'm getting the same error,
404 Page Not Found
The page 'standalone/bootloader/.php' was not found.
Oh well, it was a long shot. Happy that it worked for the OP.
androidreviewguy said:
If you guys are getting an error send me your code and via pm and I'll give it a try for you also and if it works I'll send you your code
Sent from my XT1080 using XDA Free mobile app
Click to expand...
Click to collapse
this method isnt working for me either "ERROR 404" i dont know how you did it......
My Code
androidreviewguy said:
If you guys are getting an error send me your code and via pm and I'll give it a try for you also and if it works I'll send you your code
Sent from my XT1080 using XDA Free mobile app
Click to expand...
Click to collapse
Droid Ultra. My Code:
9900051080022500#5441393631304333453600585431303830000000#A5743E6ACDD952438643903E9A98A6D96F5EA1E0#8E2F43050C0001000000000000000000.
Complete code and gettin 404 error with chrome and firefox. Please help. Thanks
Bruce
Rather skeptical. Tricking jquery to show a button doesn't force the system to generate an unlock code for you. That would work if it was generated client side, which of course it is not.
Related
Head over to Swype's site, register for the beta, and you should quickly receive an email (that you should open on your Android device) sending you to the beta download site. Once Swype is installed, you'll be led through setting it up and enabling it on your phone—if that doesn't work, press and hold on any input field, select "Input method," then choose Swype.Better act fast it might close soon !!!!
http://beta.swype.com/
deleted
That should do it
Sent from my Nexus One using XDA App
Is that better
Sent from my Nexus One using XDA App
Hmm, it installs and opens, says the data network experienced a problem then does nothing. I guess their server is swamped?
This thing is such a pain in the butt, it better amaze me.
let me check in to that
hold on
fubaya said:
Hmm, it installs and opens, says the data network experienced a problem then does nothing. I guess their server is swamped?
This thing is such a pain in the butt, it better amaze me.
Click to expand...
Click to collapse
servers are up try again worked for me ?
Thanks Op!
.
thanks for the heads up man now my sister can get in on it
Even GMail only took 5 years to exit beta...
paco909 said:
servers are up try again worked for me ?
Click to expand...
Click to collapse
Actually, it was my fault, I guess. I have Droidwall installed to block a few apps from connecting to the net. I opened it to find the swype installer was blocked. I don't know how because, you have to open droidwall, select the app and apply the rule to block it. I haven't opened droidwall in weeks, so I have no idea how it got blocked. Anyway, i have swype working. Am prepared to be wowed..
PhantomRampage said:
thanks for the heads up man now my sister can get in on it
Click to expand...
Click to collapse
Your welcome man
paco909 said:
Is that better
Sent from my Nexus One using XDA App
Click to expand...
Click to collapse
yup, 3x thanks for you
Awesome. Loving Swype!
Sent from my Nexus One using Tapatalk
problem here:
sent link to my gmail
opened link https://beta.swype.com/android/get/
swype says:
"Sorry! This is not an Android Phone."
Nexus One with CM6.1
any ideas?
zmodp said:
problem here:
sent link to my gmail
opened link https://beta.swype.com/android/get/
swype says:
"Sorry! This is not an Android Phone."
Nexus One with CM6.1
any ideas?
Click to expand...
Click to collapse
you need to install the swype-installer on your phone using your phone it self in gmail do not try to install it from your computer and transfer it to your phone. it will not work
so what is the new version number
apratomo said:
so what is the new version number
Click to expand...
Click to collapse
i'm running 2.15.56.14870.t100
although i was running a non official version for a while, and i'm not quite sure if it upgraded correctly or not.
Mine's 2.17.59.15552
Sent from my Nexus One using XDA App
zmodp said:
problem here:
sent link to my gmail
swype says:
"Sorry! This is not an Android Phone."
Nexus One with CM6.1
any ideas?
Click to expand...
Click to collapse
Make sure the User Agent of your browser is Android instead of Desktop.
I used Method A for installing google wallet on my Bell SGH-I337M and it installed successfully, but I got an error on the terminal when trying to pay (something like tap not recognized) and I have attached a screenshot of what came up on my phone. Has anyone been successful in paying anywhere in Canada with Google Wallet?
Bump
Bump
Guess I'm the only one trying this....oh well
f4s7d3r3k said:
Guess I'm the only one trying this....oh well
Click to expand...
Click to collapse
Guess not. Too many loonies, eh
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
did you get it to work im trying too in toronto
...would love to get it working any update?
humzat said:
did you get it to work im trying too in toronto
...would love to get it working any update?
Click to expand...
Click to collapse
I haven't had any changes to my setup yet so I haven't tried again. Did you follow the same steps and have the same result as me?
f4s7d3r3k said:
I used Method A for installing google wallet on my Bell SGH-I337M and it installed successfully, but I got an error on the terminal when trying to pay (something like tap not recognized) and I have attached a screenshot of what came up on my phone. Has anyone been successful in paying anywhere in Canada with Google Wallet?
Click to expand...
Click to collapse
I'd love it if this was working. Haven'y seen any confirmation of it working anywhere yet. Won't be trying it myself until there is.
I've been trying to get it to work. Sometimes can past secure elements required sometimes not. Really wish it would work. This is the top of the line phone. Why no wallet.
Sent from my SGH-I337M using xda app-developers app
So I got my SGS4 from BestBuy and they gave me a print out with my "Master Lock Code" on it, but there was another different 6-digit number just called "Lock Code." They both say the exact same thing after: "For accessing advanced features of your phone." (paraphrased)
What is this mystery Lock Code?
I'm not 100% but that sounds like your MSL code.
krnfrk6663 said:
I'm not 100% but that sounds like your MSL code.
Click to expand...
Click to collapse
I know the "master" one is, but what's the other one?
Sent from my SGS4.
Dial-codes ##LockCode# and ##MasterLockCode# both work; however, dial-code ##3282# only accepts the Master Lock Code. I'm thinking one is less secure than the other.
Lock code allows you to edit the data settings after dialing #3282#. Be careful when messing with those. Hope that helps
Sent from my SPH-L720 using xda app-developers app
GingerBread_Man said:
Lock code allows you to edit the data settings after dialing #3282#. Be careful when messing with those. Hope that helps
Sent from my SPH-L720 using xda app-developers app
Click to expand...
Click to collapse
That requires the Master and I'm well aware of that.
Sent from my SGS4.
It was probably the OTLK, its like a master lockcode, but only used for programming as it will not work a second time after it has been used.
TonyTurboII said:
It was probably the OTLK, its like a master lockcode, but only used for programming as it will not work a second time after it has been used.
Click to expand...
Click to collapse
You're right (I assume), dialing ##LockCode# no works. It says "invalid lock code" whereas any other 6-digit number just gets ignored.
I spent many hrs on the phone with sprint and was able to get my msl only they didnt know that I would recognize what it was. Also I just realized that I can see my msl using the android root https://play.google.com/store/apps/details?id=sa.root.toolkit&hl=en toolkit by scary alien.
Sent from my SPH-L720 using xda app-developers app
GingerBread_Man said:
I spent many hrs on the phone with sprint and was able to get my msl only they didnt know that I would recognize what it was. Also I just realized that I can see my msl using the android root https://play.google.com/store/apps/details?id=sa.root.toolkit&hl=en toolkit by scary alien.
Sent from my SPH-L720 using xda app-developers app
Click to expand...
Click to collapse
Uh... the question has been answered. Even if it wasn't answered, you wouldn't have answered it. I wasn't asking how to get the MSL. I wasn't asking what the MSL is. I was asking what the second 6-digit number was. I know how to get my MSL -- without calling Sprint and without Best Buy printing it on the bill -- and I know what it is. But thanks all the same. :good:
I've moved over from a Droid Razr MAXX to the Galaxy Note 3... Do I need to use the SQL edit hack to enable WiFi Tethering through the Verizon app? I haven't seen any guides for the Note 3 yet..
Thoughts?
Thank you!
EPiSKiNG said:
I've moved over from a Droid Razr MAXX to the Galaxy Note 3... Do I need to use the SQL edit hack to enable WiFi Tethering through the Verizon app? I haven't seen any guides for the Note 3 yet..
Thoughts?
Thank you!
Click to expand...
Click to collapse
I've been using the app called Foxfi from the play store which has been working great for me and that's without root! There is a free version that limits the amount of time you can use it or a paid version for like 7 bucks. A little costly but I've been happy so far. Only thing is once u go into the Foxfi app and turn on mobile hot spot u will get a pop up about needing to set up through verizon, DO NOT hit cancel, instead just push your home button and wha la!! You have working mobile hotspot! Hope this helps.
Sent from my SM-N900V using Tapatalk
Ibkevin said:
I've been using the app called Foxfi from the play store which has been working great for me and that's without root! There is a free version that limits the amount of time you can use it or a paid version for like 7 bucks. A little costly but I've been happy so far. Only thing is once u go into the Foxfi app and turn on mobile hot spot u will get a pop up about needing to set up through verizon, DO NOT hit cancel, instead just push your home button and wha la!! You have working mobile hotspot! Hope this helps.
Sent from my SM-N900V using Tapatalk
Click to expand...
Click to collapse
Thanks for the reply! I'll try that for the time being... Although I'd like to see if there's a way to use the Built-In Verizon WiFi Tether app, as it's quite stable... Maybe I'll try android-wifi-tether too...
Thanks!
-EP
EPiSKiNG said:
I've moved over from a Droid Razr MAXX to the Galaxy Note 3... Do I need to use the SQL edit hack to enable WiFi Tethering through the Verizon app? I haven't seen any guides for the Note 3 yet..
Thoughts?
Thank you!
Click to expand...
Click to collapse
Yes that will work. There is a guide in the general section.
dirtyfingers said:
Yes that will work. There is a guide in the general section.
Click to expand...
Click to collapse
Hmm... I spent a couple minutes in there looking and I didn't see anything about the SQL hack... Link?
Thanks in advance!!
-EP
EPiSKiNG said:
Hmm... I spent a couple minutes in there looking and I didn't see anything about the SQL hack... Link?
Thanks in advance!!
-EP
Click to expand...
Click to collapse
Just add the hot spot toggle... http://forum.xda-developers.com/showthread.php?t=2482867
Any way to possibly get rid of the Verizon subscription error message? It's more annoying than anything
Sent from my SM-N900V using Tapatalk
thorn11166 said:
Any way to possibly get rid of the Verizon subscription error message? It's more annoying than anything
Sent from my SM-N900V using Tapatalk
Click to expand...
Click to collapse
Yah... That's the problem i'm running into...
-EP
EPiSKiNG said:
Yah... That's the problem i'm running into...
-EP
Click to expand...
Click to collapse
Just press the home button and it will go away while leaving tethering on... As long as you have used the widget or toggle to turn it on.
Sent from my SM-N900V using xda app-developers app
adoublearonn said:
Just press the home button and it will go away while leaving tethering on... As long as you have used the widget or toggle to turn it on.
Sent from my SM-N900V using xda app-developers app
Click to expand...
Click to collapse
Well holy heck! Looks like that did the trick!
Thank you kindly!!
-EP
EPiSKiNG said:
I've moved over from a Droid Razr MAXX to the Galaxy Note 3... Do I need to use the SQL edit hack to enable WiFi Tethering through the Verizon app? I haven't seen any guides for the Note 3 yet..
Thoughts?
Thank you!
Click to expand...
Click to collapse
You must be looking for this. Was in General:
http://forum.xda-developers.com/showthread.php?t=2482867
FoxFi really works great. Just hit the Home key once you enable it and you're golden!
EPiSKiNG said:
I've moved over from a Droid Razr MAXX to the Galaxy Note 3... Do I need to use the SQL edit hack to enable WiFi Tethering through the Verizon app? I haven't seen any guides for the Note 3 yet..
Thoughts?
Thank you!
Click to expand...
Click to collapse
Not sure. But I noticed something in SQLite.
Settings storage
settings.db
Global
51 Wifi_watchdog_on 1
I'm thinking - hoping- that that is the entitlement/subscription check. Anyone willing to find out?
Changed it to 0... Still getting Use of this service requires a subscription...
I think the Wifi Watchdog setting is to alert you when a WiFi network is in range....
I've just been using the notifications panel toggle hack, then pressing the Home button when the error comes up: http://forum.xda-developers.com/showthread.php?t=2482867
Would be great to get rid of the notification though
-EP
EPiSKiNG said:
Changed it to 0... Still getting Use of this service requires a subscription...
I think the Wifi Watchdog setting is to alert you when a WiFi network is in range....
I've just been using the notifications panel toggle hack, then pressing the Home button when the error comes up: http://forum.xda-developers.com/showthread.php?t=2482867
Would be great to get rid of the notification though
-EP
Click to expand...
Click to collapse
Thanks for the heads up and trying it out. I'd change it back to 1, though. I did some searching and it seems that watchdog is a security measure to try and keep hackers from accessing your phone through wifi. So either what you were thinking is right or the info I have found is. But I'm no expert. So I don't know which it is. Lol. Either case is seems cruicial or important. So probably best to not mess with that.
I have the toggle going, also. I just figured it was worth a shot, at least. I just get a little annoyed having to press the Home button every time. But at least we have tether. I can deal with that until such time that they figure it out.
Thanks again for trying that!
I have actually investigated this a bit, and like new devices, the check is now built in Framework-res.apk. You need to decompile, edit the lines that call the command to check for subscription, and recompile. I have tried quite a few times but could never get the signing right and replace the file on the device without a bootloop, so I gave up. I think I have more specific information on like the 2nd page of the we have root thread.
Sent from my SM-N900V using Tapatalk
changt34x said:
...I think I have more specific information on like the 2nd page of the we have root thread.
Sent from my SM-N900V using Tapatalk
Click to expand...
Click to collapse
Will you please post a link, as genius here is having a hard time finding it? Lol
?
____________________
"King Of The 'Self-Edit'"
____________________
"They who can give up essential liberty to obtain a little temporary safety deserve neither liberty nor safety." --Benjamin Franklin
firefighterguy said:
Will you please post a link, as genius here is having a hard time finding it? Lol
?
____________________
"King Of The 'Self-Edit'"
____________________
"They who can give up essential liberty to obtain a little temporary safety deserve neither liberty nor safety." --Benjamin Franklin
Click to expand...
Click to collapse
It had been made into a flash able zip in safestrap, check the Original Development section. The instructions for the actual changes in Framework-res.apk are also stated there, they are the same as what I would have done.
Sent from my SM-N900V using Tapatalk
guys
today i have reset my wife's G4 plus from recovery and stuck to lock screen asking to sync with owner's account.
I have tried doing it few times already and even resetting the password and doing it again.
but it just comes back to the same prompt again.
in the gmail it showed as it prevented access from a device and i have confirmed it as me but still it doesnt let me sign into the phone.
any idea?
cheers
dying4004 said:
guys
today i have reset my wife's G4 plus from recovery and stuck to lock screen asking to sync with owner's account.
I have tried doing it few times already and even resetting the password and doing it again.
but it just comes back to the same prompt again.
in the gmail it showed as it prevented access from a device and i have confirmed it as me but still it doesnt let me sign into the phone.
any idea?
cheers
Click to expand...
Click to collapse
http://www.rootjunky.com/motoreaper-frp-removal-tool/
Sent from my XT1254 using Tapatalk
sd_shadow said:
http://www.rootjunky.com/motoreaper-frp-removal-tool/
Sent from my XT1254 using Tapatalk
Click to expand...
Click to collapse
thanks mate. i will give it a try.
sd_shadow said:
http://www.rootjunky.com/motoreaper-frp-removal-tool/
Sent from my XT1254 using Tapatalk
Click to expand...
Click to collapse
had a look at this.
that website says it is only available for it's paid students and will need to pay $40 to enroll in the course.
i am a bit confused.
dying4004 said:
had a look at this.
that website says it is only available for it's paid students and will need to pay $40 to enroll in the course.
i am a bit confused.
Click to expand...
Click to collapse
I'm wondering if you try removing the device from your Gmail account will work.
You can try though..