[Q&A] [ROM][Official] CyanogenMod 12 - Droid RAZR M Q&A, Help & Troubleshooting

Q&A for [ROM][Official] CyanogenMod 12
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][Official] CyanogenMod 12. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!

endless boot
I tried two different nightlies and the phone will not boot. It just goes to the CM boot screen forever.
I just upgraded to the KK bootloader and this is the first ROM I've tried since then so hopefully I didn't do something else wrong.
I had to modify the scripts because I got an error saying the ROM was for a different phone.
help?

Nightly of jan07th is flashing fine and i am using it ..
Tried flashing jan12th and jan13th and both got stuck at the boot logo ..
Then tried jan15th built and that too got stuck but this time at the boot animation screen ..
Now i am back on jan07th ..
Heard jan14th is flashing fine, will try and update ..

duplicationcube said:
I tried two different nightlies and the phone will not boot. It just goes to the CM boot screen forever.
I just upgraded to the KK bootloader and this is the first ROM I've tried since then so hopefully I didn't do something else wrong.
I had to modify the scripts because I got an error saying the ROM was for a different phone.
help?
Click to expand...
Click to collapse
Try to flash jan14th nightly ..
Its flashing fine for me ..

xt901 upgrade to KK bootloader?
I am using a Motorola Electrify M (xt901) on US Cellular.. It is basically the same as the RAZR M (xt907) from Verison. I am able to flash any ROMS designed for xt907 successfully. But my xt901 is on the JB Bootloader. Anyone successfully upgraded to KK boatloader on this phone. The Lollipop builds using JBBL are just starting to appear, but I am having trouble finding them. Can anyone point me in the right direction, or know how I can update to KKBL, so I can use the official CM12 releases?

thege128 said:
I am using a Motorola Electrify M (xt901) on US Cellular.. It is basically the same as the RAZR M (xt907) from Verison. I am able to flash any ROMS designed for xt907 successfully. But my xt901 is on the JB Bootloader. Anyone successfully upgraded to KK boatloader on this phone. The Lollipop builds using JBBL are just starting to appear, but I am having trouble finding them. Can anyone point me in the right direction, or know how I can update to KKBL, so I can use the official CM12 releases?
Click to expand...
Click to collapse
CM12 for JBBL > https://twitter.com/dhacker29/status/553873983465332736

CM12 JBBL for xt901
Thanks for the link.
Is there a link where I can download nightlies, or just the one ROM linked from dhackers twitter account?
I found some Lollipop on JBBL builds on Vanir.co for the xt901 (actually unified msm8960 builds),
but touch screen does not seem to work for me, so I can flash and boot OK, but touch screen does nothing.

thege128 said:
Thanks for the link.
Is there a link where I can download nightlies, or just the one ROM linked from dhackers twitter account?
I found some Lollipop on JBBL builds on Vanir.co for the xt901 (actually unified msm8960 builds),
but touch screen does not seem to work for me, so I can flash and boot OK, but touch screen does nothing.
Click to expand...
Click to collapse
As far as I know the only ones that work are dhacker29's and the ones from Chinese dev Mijuu. Both are unofficial status and have some bugs that prevent them from going nightly. That's what you get for owning a JBBL device...
Well, at least dhacker indeed said that after SELinux is resolved there will be a possibility for JBBL to go nightly, so stay tuned.
Sent from Google Nexus 4 @ CM12
[WARNING: XDA Premium 4.0.13+ lacks Signature function - do not update]

bugs wi-fi and bluetooth
If bluetooth headset is connected wi-fi does not connect

Do I need to be on a specific version of TWRP to flash this?

AKShotgun said:
Do I need to be on a specific version of TWRP to flash this?
Click to expand...
Click to collapse
2.8.x.x (KK BL) is highly recommended.
Sent from Google Nexus 4 @ CM12
[WARNING: XDA Premium 4.0.13+ lacks Signature function - do not update]

Android lollipop on droid razr m
I want to update my droid Razr M android version Lollipop because i very Like this Android version but i don't Know how to install this...please any person help me...with full detail please....

Stable Enough for a Daily Driver?
I was trying to decipher through the comments whether or not this ROM is functional enough to bring someone through an average day, but I couldn't find a definitive bugs list or anything. Some people are saying that there are some minor bugs but most of them sound pretty obscure so that has me thinking that I'll be fine but I was just wondering if someone could reassure me. I'm pretty literate with this kind of stuff, I'm just wondering if any major features are down like wifi, phone, SMS, MMS, camera, normal stuff. (as of 2/15/15 or afterwards)
Thanks

All major functions work. There is some battery drain reported and I have had issues with using Bluetooth while on wifi (stays connected but data stops working)

michaelnv710 said:
I was trying to decipher through the comments whether or not this ROM is functional enough to bring someone through an average day, but I couldn't find a definitive bugs list or anything. Some people are saying that there are some minor bugs but most of them sound pretty obscure so that has me thinking that I'll be fine but I was just wondering if someone could reassure me. I'm pretty literate with this kind of stuff, I'm just wondering if any major features are down like wifi, phone, SMS, MMS, camera, normal stuff. (as of 2/15/15 or afterwards)
Thanks
Click to expand...
Click to collapse
WiFi, check.
Phone, check.
SMS, check.
MMS, haven't used at all, waiting on verification from others.
Data, sure, been using this baby as a hotspot for half a year til this day.
Camera, check.
Sent from Google Nexus 4 @ CM12
[WARNING: XDA Premium 4.0.13+ lacks Signature function - do not update]

and how can I tell if I have the jelly bean or kitkat boot loader? I've been looking everywhere on how to figure it out

f2fs support?
I've read that the f2fs filesystem is faster than ext4 in most cases, and on TWRP there is an option to switch to f2fs. But does the ROM support it?

Has anybody tried encryption with CM12? Any problems?
Has anybody successfully installed the Motorola camera(the one from Moto G/X where you touch the screen anywhere to take photo)? I was using it on AOSPA kitkat.

Buenas, ¿esta ROM funciona con bootloader bloqueado?

iPelirrojo said:
Buenas, ¿esta ROM funciona con bootloader bloqueado?
Click to expand...
Click to collapse
None of the ROMs would work with a locked bootloader. Give it up of you're on 18x.46.15.
And English please.
Sent from Google Nexus 4 @ CM12
[WARNING: XDA Premium 4.0.13+ lacks Signature function - do not update]

Related

[Q] xt907 / cm11 msm8960 m10 snapshot wifi

Okay, This is my second post...Again, sorry if it's in the wrong area.
Super excited, Got CM11 flashed today. Worked on it the best way, at work. Problem arises when I got home. Having wifi connection issues.
I read about this problem before, cannot find the post. The problem is not ALL wifi, only my access points. Both wifi routers (wired) work fine. I do however, have two access points that I use more often than any other situation. Neither of which will connect. Both are being recognized, and get to "connecting..." for about half a second. Both of which worked perfectly on my 4.4.2.
I'm running on the snapshot of the msm8960 20140916, twrp recovery 2.7.1, kernel 3.4.103, xt907
Mobile data works fine, but shows up LTE only, seems like the connection is still 4G however.
Any advice?
Thanks for any input!
My advice? Downgrade to JB BL and use CM11 JB BL for the time being.
Sent from Google Nexus 4 @ CM11
[WARNING: XDA Premium 4.0.13 lacks Signature function - do not update]
AndyYan said:
My advice? Downgrade to JB BL and use CM11 JB BL for the time being.
Sent from Google Nexus 4 @ CM11
[WARNING: XDA Premium 4.0.13 lacks Signature function - do not update]
Click to expand...
Click to collapse
well, i already had kit kat, 4.4.2, aren't there extra steps to downgrading? just wondering.
thanks
EDIT: 09-25
Something tells me, this must be an issue between this particular build of CM and my access point. I'm wondering what the differences are in the way this build has configured the wifi, and the way it is while stock on xt907. (since i have used the recommended msm8960)
Based on some people's comments before, wifi hasn't been an issue. It's not technically all wifi giving me a problem, just any access point.
Sorry, thinking out loud here, but maybe someone will hear my call for help and point me in the right direction lol.

[Q] Droid RAZR M xt907 Cyanogenmod Installer?

after hard bricking my old phone, and killing it i found this suerdooper phone for only 75e, because i am scare a bit to flash this phone i was thinking to use the Cyanogenmod Installer and install the lates Cyanogenmod.
does anybody tried this method on razor m? does the phone get reconized by the installer?
thanks
cheers
No, you need to install it the way described on the CM page, just replace the recovery with this one (6.0.4.9), as the old 6.0.4.4 is for the JB bootloader.
ok i am i noob but isnt this a recovery img? shouldnt i have stock KK on my phone before using this recovery img?
dont forget i am a noob dont use fancy words
cheers m8
Um, I'm saying that you should use CM11 for JB BL (msm8960_jbbl) instead of the version for KK BL (you don't need to understand this thoroughly) if you want to avoid WiFi and GPS hassle. If you haven't upgraded to stock KitKat yet, good for you - might as well just follow the CM page guide without replacing recovery.
Sent from Google Nexus 4 @ CM11
[WARNING: XDA Premium 4.0.13 lacks Signature function - do not update]
AndyYan said:
Um, I'm saying that you should use CM11 for JB BL (msm8960_jbbl) instead of the version for KK BL (you don't need to understand this thoroughly) if you want to avoid WiFi and GPS hassle. If you haven't upgraded to stock KitKat yet, good for you - might as well just follow the CM page guide without replacing recovery.
Sent from Google Nexus 4 @ CM11
[WARNING: XDA Premium 4.0.13 lacks Signature function - do not update]
Click to expand...
Click to collapse
ok thanks, got it
and avoid KK for this phone :cyclops:
thank you all so much for the fast respond, i love this community
cheers

[Q&A] [AOSPA 4.4.4 KTU84P] ParanoidAndroid 4.4+ G2 [06/28]

Q&A for [AOSPA 4.4.4 KTU84P] ParanoidAndroid 4.4+ G2 [06/28]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
One simple question.
The builds from aospa are 4.4 sources or 4.2?
Thanks in advance.
NEO2598 said:
One simple question.
The builds from aospa are 4.4 sources or 4.2?
Thanks in advance.
Click to expand...
Click to collapse
@houstonn was originally developing but stopped in June due to computer failures which is being resolved soon. His last build of 6/29 was on 4.4 sources and required the modem of stock 4.4.
The current builds supplied by @ayysir and now @jakew02 are on 4.2 sources which would require that specific modem.
Which ones exactly not sure as I am not familiar with every carrier version only sprint.
Sent from my LG-LS980 using Tapatalk
MeestaAytch said:
@houstonn was originally developing but stopped in June due to computer failures which is being resolved soon. His last build of 6/29 was on 4.4 sources and required the modem of stock 4.4.
The current builds supplied by @ayysir and now @jakew02 are on 4.2 sources which would require that specific modem.
Which ones exactly not sure as I am not familiar with every carrier version only sprint.
Sent from my LG-LS980 using Tapatalk
Click to expand...
Click to collapse
It has been stated in the ROM thread multiple times that you must use a 4.2 STOCK JB MODEM for best compatibility. Any other modems you guys use is solely at YOUR OWN DISCRETION. @MeestaAytch they should know what to use at this point but thanks for clarifying again for those who don't want to search before posting :highfive:
@jakew02 no problem. I know it's tiring repeating the same information but from what I've seen in my time using XDA.... It'll never change.
I'm glad you devs still continue doing what you're doing for us though knowing this nonsense goes on.
Sent from my LG-LS980 using Tapatalk
A few bugs
Hi,
The thread is too big for me to go thru it post by post so I'll just make a few questions and hopefully I'll get some answers. I flashed this ROM and it was working flawlessly. I only found very few bugs like not being able to set up multiple recurrent alarms because the app would freeze and there was another bug but I can't remember. The problem I find frustrating is with the text messages or SMSs. At first I was not receiving SMSs. Then I was receiving them but I couldn't send any. I returned back to stock VS98024a and I'm still having the same problem but at least I'm getting a pop-up when "General problems: cause code 96". I have googled this several times in several ways and can't seem to find a solution, not even on the Verizon site or help app on the phone. I need help with this please.
How to keep the back home task manager buttor on the screen?
battery life? i want to install on lg d800 and its beta only..
dori kernel
Hi,
From where you get Dorimanx kernel for AOSP ROMs ?
My phone says it can't connect to the camera, and the torch. Does anyone know how to solve this?
Sent from my LG-LS980 using XDA Free mobile app
LG G2 D802 SIM not recognized
ok, so im quite familiar with flashing roms etc, ive had cyanogenmod and cloudy g3 installed on my d802 without any problems however when i flashed paranoid android 4.4 (i used the appropriate one for my model) i am left with no service, it seems that my sim is not recognised . ive tried reflashing several times and even reflashed my old rom which worked (calls, texts data) please could someone help me as i love the look and feel but cant use my phone without radio.
im using twrp recpvery aswell
Alex
a13xch1 said:
ok, so im quite familiar with flashing roms etc, ive had cyanogenmod and cloudy g3 installed on my d802 without any problems however when i flashed paranoid android 4.4 (i used the appropriate one for my model) i am left with no service, it seems that my sim is not recognised . ive tried reflashing several times and even reflashed my old rom which worked (calls, texts data) please could someone help me as i love the look and feel but cant use my phone without radio.
im using twrp recpvery aswell
Alex
Click to expand...
Click to collapse
Please state exact filename and order of wipe/flash.
Just tried the test build for D802. Booted at LG logo for a while then screen turned black with 2 red lines and one green vertical line. I was so sure I was gonna get the permanent black lines but then again I read that the damaged screens are caused by already faulty hardware under high heat.
Anyways, I panicked and then I restarted the phone by pressing power + down. Then I got the weird boot sequence like everyone above describes and it boots into the OS. Thank God I got no black lines! However it wasn't stable for me as the phone rebooted itself twice within the span of 20 minutes. I'm going back to 13/10 build for now.
Any d802 users flashing latest twitter released rom can you please report here if jdi or lgd and whether or not weird logo appeared?
I'm on jdi and had weird logo appeared after clean flash. I did not let the rom boot and reflashed previous version without further problems
FYI, houston's latest works great so far on the VS980. Clean flash, using RenderKernel R24.
So i have the vs980 and i currently have xdabbebs rom on my phone, but i want to try PA. Can someone explain how to flash a rom over another rom, or is there something else i should do. i tried it once by flashing with twrp and it just hung on the lg sreen. luckily i had a back up
jclemens23 said:
So i have the vs980 and i currently have xdabbebs rom on my phone, but i want to try PA. Can someone explain how to flash a rom over another rom, or is there something else i should do. i tried it once by flashing with twrp and it just hung on the lg sreen. luckily i had a back up
Click to expand...
Click to collapse
Migrating from one ROM to another is for me like this:
1. Nandroid backup
2. Wipe all except sdcard (yes, wipe system)
3. Flash new ROM
Be sure to always have a Nandroid backup!
And always check what baseband (aka radios or modem) your new ROM is requiring.
-___-
If you are UPDATING your current ROM, I.e. flashing a new build of let's say paranoid android, you can flash the updated file right on top of your old system. That is called DIRTY FLASHING and it's actually risky, so please, always do Nandroid backups!
-____-
Peace
Thank you for the reply. I tried doing it the way you suggested again and i get the same results. I wipe everything that is necessary and when i try to install the zip it immediately says failed
jclemens23 said:
Thank you for the reply. I tried doing it the way you suggested again and i get the same results. I wipe everything that is necessary and when i try to install the zip it immediately says failed
Click to expand...
Click to collapse
Ok
I would;
Update my custom recovery to the latest
Download recommended baseband, to be on the safe side
Redownload the ROM
Check the md5-checksum
Retry to install it
Flash the recommended baseband, better safe than sorry
Never give up
Peace
Hi guys i just flashed the newest build and out of all the roms i have flashed i have never seen this problem. After i flashed i have no sim service at all. Done a clean install still no good.

[Q&A] [ROM] [AOSP] Lollipopalooza | manta/Nexus 10 | LRX21T | 2014/11/16

Q&A for [ROM] [AOSP] Lollipopalooza | manta/Nexus 10 | LRX21T | 2014/11/16
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM] [AOSP] Lollipopalooza | manta/Nexus 10 | LRX21T | 2014/11/16. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
CazeW said:
For those needing to update their bootloader, I've attached a zip that flashes the new bootloader.
Installation instructions:
1. Extract the archive
2. Reboot tablet to bootloader
3. Connect the tablet to PC
4. Run bat file
I'm not responsible for any damage to your device if something goes wrong!
Click to expand...
Click to collapse
Can I flash the Bootloader posted by u on Custom Android 4.4.4?
Has anyone been able to get xposed installer to work on this ROM? I have tried redownloading it (xposed) and cannot get it to work. Something about xposed is not (yet) compatible with Android SDK version 21 or your processor architecture.
lilsweepr said:
Has anyone been able to get xposed installer to work on this ROM? I have tried redownloading it (xposed) and cannot get it to work. Something about xposed is not (yet) compatible with Android SDK version 21 or your processor architecture.
Click to expand...
Click to collapse
i hate to be the one to break it to you.....xposed is not compatible with Lollipop as it cannot run on art (at least for now although i wouldn't expect anything anytime soon).....surprised you haven't seen anything mentioned previously
damngood98 said:
i hate to be the one to break it to you.....xposed is not compatible with Lollipop as it cannot run on art (at least for now although i wouldn't expect anything anytime soon).....surprised you haven't seen anything mentioned previously
Click to expand...
Click to collapse
Well darn. I will admit I haven't looked too hard on information before I flashed this rom. I have been thru several versions of this developers rom and like to stay with what I know. I have tried different ones but have always come back to craig.
I wasn't using too much out of exposed, just chromepie(which i had just found), Play Store Changelog and Heads Up Notifications.
Chromepie helped me use Chrome like Browser and I am/was starting to move to it. looks like I will have to try to find a working version of Browser for lollipop so I can get pie controls back.
Can someone reply to my query?
champ1311 said:
Can someone reply to my query?
Click to expand...
Click to collapse
there's simply no need if you're staying on 4.4.4
damngood98 said:
there's simply no need if you're staying on 4.4.4
Click to expand...
Click to collapse
No. I meant that I'm currently on Android 4.4.4 n I want to flash Lollipop whose prerequisite is the latest Bootloader... So should I flash the latest Bootloader while I'm on Android 4.4.4 itself before flashing Lollipopalooza?
I am a newbie n any help would be great!!!
I flashed this rom, but didn't flash the new bootloader and it works. The latest bootloader isn't necessary.
champ1311 said:
No. I meant that I'm currently on Android 4.4.4 n I want to flash Lollipop whose prerequisite is the latest Bootloader... So should I flash the latest Bootloader while I'm on Android 4.4.4 itself before flashing Lollipopalooza?
I am a newbie n any help would be great!!!
Click to expand...
Click to collapse
i would flash the bootloader, reboot recovery and then flash lollipopalooza
How do I know if I need to update my bootloader?
Plus 1
armandosal said:
How do I know if I need to update my bootloader?
Click to expand...
Click to collapse
did you update to L ota? then no.....but rooted running kitkat and flash L...yeah, your bootloader is not current.....results appear to vary, some have issues others do not when not updating
Is there a trick to getting root. I flashed the latest suoer su but still have no root
Sent from my SM-N910V using XDA Premium HD app
I'm getting all the files ready to flash this but the only thing I can't find is the new bootloader already got the latest twrp , all I need is the new bootloader, I'm going to flash it with the old bootloader and see how it behaves, until I can get the new one.
RoloRacer on KillerKat Note 3
I was rooted with kik kat and just flash LP with no problems. It took about 10 minutes to boot up but that's it.
I cannot receive any Bluetooth or NFC files? Can someone check as I can connect to Bluetooth devices just fine but just came receive any files?
After 2 days of having this lollipop rom, so far everything works smooth as butter, the only two things I've encountered is the Wi-Fi speed is slow at times , and disconnects at times but reconnects shortly after and the system.ui fc when clearing all recent. I've also noticed dolphin browser is laggy when scrolling, but that's an app issue and Google keyboard just fc'ed on me while I was typing this using swipe feature on it. But regardless I always enjoy a new version of android when it comes out, I'm sure things will get ironed out with a few updates, or a Dev here fixing them.
Sent from my Nexus 10 using Tapatalk
Same here. Wifi drops a bit. Love it though. Thx craig
Thank you for the Thunderkat roms they were the best (in fact I'm still using the latest version) especially coupled with ktoonsez kernels, unfortunately with the latest version Lollipopalooza I wasn't able to do what I usually reducing the brightness to 2 (because I exclusively use my tablet in darkness), I proceeded as usual decompiled the framework-res and changed the Lux and brightness values recompiled but unfortunately I'm getting a bootloop, whether I flash the rom with the modified framework or afterwards by copying the new framework in TWIN.

[Q&A] [AOSPA 5+][ALPHA][OFFICIAL][G2][ALL VARIANTS][Paranoid Android]

Q&A for [AOSPA 5+][ALPHA][OFFICIAL][G2][ALL VARIANTS][Paranoid Android]
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [AOSPA 5+][ALPHA][OFFICIAL][G2][ALL VARIANTS][Paranoid Android]. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
As I can install this ROM from ROM cloudyg3 my ls980?
scary voice in voip calls (Skype etc....)
I have experience this thing with every the AOSP lollipop builds i have tried till date.
What VZW baseband does this ROM work with?
NVM FOUND IT... JB baseband for anyone else looking....
D802 Skype etc.
Been having problems with skype, viber and such apps on both CM12 unofficial and PA on my d802. would appreciate if it was listed as a known problem if its happening to other dudes.
Guys really waited for this rom! I used it on older devices and is one of the best!
Can we have a bug list or there are no bugs?
Can't wait for full PA features!
vs980 dialer locking up
clean flashed on jb baseband on vs980 and when make first call can't make another as if call is still in progress is there any help for would like to test rom
No
Deleted
It seems that battery life on my D802, 2014-12-05 build is seemingly better.
Placebo or real - who knows?
AND! Pull-down-on-right to get all toggles and settings works also.
I love the work by Mike and the Gang!
First off, thanks to the devs for all the hard work!
But I have a quick question.
On the latest LS980 build, I can't seem to access APN settings. And I also get 3G but no LTE. Any advice?
If we're using a bumped kernel and recovery can we use this with KitKat boot loader or do we still need to use jelly bean boot loader unless the ROM is bumped as well?
Just using this for 1 hour ...wiped everything before install...installed 4 times to be sure.this rom is lagging a lot and force closing some apps...i was using cm 12 04/12 with no problem ...installed this cause of 5.0.1 update ...i ll try it a little more and see if the problem is fixed.
Sent from my LG-D802 using XDA Free mobile app
abdel12345 said:
If we're using a bumped kernel and recovery can we use this with KitKat boot loader or do we still need to use jelly bean boot loader unless the ROM is bumped as well?
Click to expand...
Click to collapse
Unfortunately you need to use the jb bootloader.
Enviado do meu LG-D802 através de Tapatalk
isaias1983 said:
Just using this for 1 hour ...wiped everything before install...installed 4 times to be sure.this rom is lagging a lot and force closing some apps...i was using cm 12 04/12 with no problem ...installed this cause of 5.0.1 update ...i ll try it a little more and see if the problem is fixed.
Sent from my LG-D802 using XDA Free mobile app
Click to expand...
Click to collapse
What device are you using and what bootloader and baseband?
How can we get the battery charging led turned off? It's really annoying at night when using the phone while charging. Or is that not possible yet? I tried doing it through an app like light flow and another one called led control but it didn't do anything so I don't think they work on lollipop yet.
So anyway to shut it off through ROM or not yet?
Just for giggles I updated my TWRP to 2.8.1.9, flashed D802 2014-12-08 build and gapps and supersu, all in one strike.
-Works well! Recent Apps-list now functioning and all is HappyPuppy.
Peace
Edit: Clean flashed today's update and all's good now
Why it say binery error on lg g2 d803 ??
Very low audio output to car
I first noticed this issue with cm12, and now still occurs here on PA.
With my volumes maxed on both my stereo and phone, it is still fairly quiet. I have tried multiple different volume boosters, zips, and nothing fixes it. On CM12, it was working amazing for a day then just stopped again, and i have no idea why lol.
It may be a general lolipop issue, but ive been googling for days on this and im stumped.
Is anyone else having an issue with overheating when SuperSU is flashed? I'm on D800 and have tried several modems and only seem to have the problem when rooted.

Categories

Resources