Database Users

HTC magic bricked after update of Radio

hi everyone..
i think i bricked my phone yesterday.. after update of the radio (6.35.08.29) the phone now wont start...
the only thing i get is the htc hero boot logo (a phone with a green arrow on left side and a gray arrow on right, with the text HTC underneeth) and after some time it (about half an hour the phone turns off)
i am planning to take the phone to repair, and saying it happend during one of the htc updates..
but if someone out there could help me unbrick i would really appreciate it.
BTW, phone cant get into fastboot, HBoot and recovery mode.. i tried almost everything
heeelp me..
thx everyone i bow before the community

IstBarP said:
hi everyone..
i think i bricked my phone yesterday.. after update of the radio (6.35.08.29) the phone now wont start...
the only thing i get is the htc hero boot logo (a phone with a green arrow on left side and a gray arrow on right, with the text HTC underneeth) and after some time it (about half an hour the phone turns off)
i am planning to take the phone to repair, and saying it happend during one of the htc updates..
but if someone out there could help me unbrick i would really appreciate it.
BTW, phone cant get into fastboot, HBoot and recovery mode.. i tried almost everything
heeelp me..
thx everyone i bow before the community
Click to expand...
Click to collapse
I had almost exactly the same problem, nothing works for me. Phone keeps rebooting after HTC logo. recovery is no go.
HTC service center needs to replace the motherboard in the end.
good luck

Are you certain that you cannot even get into fastboot? Take battery out, unplug the usb cable and put the battery back in to stop it from getting stuck in a reboot cycle and then hold back and power on.
If you cannot even get into Fastboot then thats about as bricked as you can get i'm afraid.

I performed a SPL flash, the phone rebooted ,it took long time rebooting so i got panicked i pulled out the battery ( wasn't a smart move ).
tried to start the phone.. now i was stuck at the first splash screen.
-pulled out the battery and back again start the phone... stuck at the first splash screen or boot looping endlessly,
-did all possible key combinations to get in fastboot, recovery mode... nothing.
-cried for help, got directed to a post similar to mo my case... worked for me hope it dose for everyone else.
here is what i did (followed):
-On the PC, i ran the command 'fastboot boot recoveryimage.img'.
-At this point the command says 'waiting for device' (or something like that).
-I removed the battery.
-went sleep
-woke up in the morning, went back to my old duct taped SE phone
-came home in the evening
-I Connected USB.
-I inserted the battery.
-I booted the phone while holding the HOME key.
-The phone still froze at the first splash screen, but then suddenly, the waiting fastboot command detected the phone and booted the recovery image!
flashed again but this time checked all steps twice before i check them a third time, and flashed the SPL and radio and the rom.

IstBarP said:
hi everyone..
i think i bricked my phone yesterday.. after update of the radio (6.35.08.29) the phone now wont start...
the only thing i get is the htc hero boot logo (a phone with a green arrow on left side and a gray arrow on right, with the text HTC underneeth) and after some time it (about half an hour the phone turns off)
i am planning to take the phone to repair, and saying it happend during one of the htc updates..
but if someone out there could help me unbrick i would really appreciate it.
BTW, phone cant get into fastboot, HBoot and recovery mode.. i tried almost everything
heeelp me..
thx everyone i bow before the community
Click to expand...
Click to collapse
sounds like you may have not installed radio/spl in the proper order.. shouldnt be a problem if you can get into fastboot... please tell us exactly what you did, and in what order..

hey,.. sorry for the long time since last time..
i sended in my phone
i couln't get into either fastboot or nothing else.. the CMD said waiting for device when tried to fastboot while in logo..
the only thing i could get into (that booted otherwise) was the action + power
i first updated followed a toturial where i updated my phone.. first spl, then radio, and then recovery img..
but since i read about people having probs with a radio where the phone boots but after a 4 secs restart i installed a new radio and thats where the probs started happening.. and then i could not get past the boot logo..
thx for the many answers and sorry i first come back now to see ..
if they cant fix my phone i will try follow ur guide Ch3w

BTW
as soon as i get my phone back i am up for another go i think..
i got a sapphire 32a.. can anyone give a link to a good tutorial?
thx

From my limited knowledge, u are always supposed to update radio first then spl then recovery.
http://forum.xda-developers.com/showthread.php?t=605239

yeah
achillies400 said:
From my limited knowledge, u are always supposed to update radio first then spl then recovery.
Click to expand...
Click to collapse
I followed that exact one.. but when the 6.35.10.18 failed (kept reboot every 3-5 sec) i decided to install the 6.35.08.29 instead and thats where it failed.. :/

THIS! NOW! COME ON!
This is my problem also! Please help me to un-brick.
As I saw on youtube, it's a 'semi-brick'.

It's not a brick if you can go into fastboot.

Riffbox unbrick
Sent from my HTC Desire using XDA App

Sorry to hear mate, hope it gets fixed. Don't really have any helpful suggestions for the un-bricking part, but next time upgrading radio etc., I'd suggest using Eyegor's radio switcher. Although if you sent it to the dealer, you'll probably have to re-root if they fixed it (but I know, that you know how to do that, you helped me in my early days )
I'll keep my fingers crossed!

Try this. i tried and it worked for me. press the power button and home together and push the battery in at that time. it would take you to recovery .

Ok, the guy I sent it to, couldn't make something, so the phone will return to me, possibly tomorrow.

rensenin said:
Try this. i tried and it worked for me. press the power button and home together and push the battery in at that time. it would take you to recovery .
Click to expand...
Click to collapse
It didn't work :\

Hi i had the same prblem with mine ,, push power when you see the Htc logo push the Back button and hold it there until you get in to Fastboot ,, worked for me

Whiskas2009 said:
Hi i had the same prblem with mine ,, push power when you see the Htc logo push the Back button and hold it there until you get in to Fastboot ,, worked for me
Click to expand...
Click to collapse
Didn't work for me.

I'm also stuck after flashing Radio update....
Now i got this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
And now nothing else shows up. Not fastboot, not recovery, nothing. Just this damn icon.
Ideas?

Phk said:
I'm also stuck after flashing Radio update....
Now i got this:
And now nothing else shows up. Not fastboot, not recovery, nothing. Just this damn icon.
Ideas?
Click to expand...
Click to collapse
try installing a normal RUU .. that should do it .. depends on your computer some times finding the phone though..
this thread died more than a half year ago when i created it :/.. in the end I send my phone to the repair shop

[HELP] S7 edge G935F bricked

Hi Guys,
After trying to start my s7 edge, i have got a frozen screen and bootloop to samsung logo... Blue light still like this and Green light flashing slowly behind the blue light.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
So i tried to force restart it by pushing Volume Down+Power Button, not any response...
Today i did a flash firmware ( G935FXXU1DPLT_G935FOXA1DPLT_BTU_FULL_SAMFIRM.NET) by Odin and all seems to be ok by Odin... See the screenshots. S7 got restarted but still freezes as in the beginning.
Any help please??

Go to recovery volume up+ home button. Hold volume up and home button before pressing power go to recovery and factory reset.

gAracUh said:
Go to recovery volume up+ home button. Hold volume up and home button before pressing power go to recovery and factory reset.
Click to expand...
Click to collapse
I've tried but, after showing installing update message, i've got the android logo with as message "No command"...

Try to boot again in recovery, if happen again try to use original firmware. Just try to boot recovery again.
---------- Post added at 01:05 PM ---------- Previous post was at 12:56 PM ----------
Anyway what did you do? Why you encoutering that problem?

gAracUh said:
Try to boot again in recovery, if happen again try to use original firmware. Just try to boot recovery again.
---------- Post added at 01:05 PM ---------- Previous post was at 12:56 PM ----------
Anyway what did you do? Why you encoutering that problem?
Click to expand...
Click to collapse
I tried to boot recovery again, same issue... I didn't install new application or something added to phone for more than 2 weeks, from then i haven't observed issues with my s7 edge.

I tried back to flash it now, but with my 7% low battery, i couldn't hope more than this ! i'm letting it charging now until his 100% then i'll retry to flash it.

It doesn't charge or shows any sign of life... what the hell! what must I do???

The best solution for that is bring your phone to samsung service center or wait for other member reply in this thread. Maybe some other could help you with your problem. Anyway i'm sorry couldn't help you.
Did your phone is rooted before? Its strange that happened to your phone. Or did you flash anything or something in your phone before?

gAracUh said:
The best solution for that is bring your phone to samsung service center or wait for other member reply in this thread. Maybe some other could help you with your problem. Anyway i'm sorry couldn't help you.
Did your phone is rooted before? Its strange that happened to your phone. Or did you flash anything or something in your phone before?
Click to expand...
Click to collapse
Hi man,
Thanks for the reply.
I didn't flash berfore or tried to root it. i just used Lucky patcher for non root user.. don't know what it could do to the s7 edge knowning that it hasn't privilege to change anything in the software of samsung.
Problem with samsung warranty, is that about 10 months ago s7 edge felt on the ground, got back cover little bit broken. so the local shop told me that sure they will ask for reparation because there is a crack behind the phone so certainly that the issue comes from the crack... so i think i'll just repair the cover and send it properly to samsung, 'cause it stills under warranty.

i've got him back but problem is when i launch the odin flash, it reboots the phone and makes a fail for the flashing rom... it does a bootloop...

I'm not sure bro but sounds like your eMMC phone is broken that's why you're not allowed to flash firmware. But try to contact other expert member here try to send a pm message maybe they can help you out.

gAracUh said:
I'm not sure bro but sounds like your eMMC phone is broken that's why you're not allowed to flash firmware. But try to contact other expert member here try to send a pm message maybe they can help you out.
Click to expand...
Click to collapse
Can you give me some members name that sounds "experts" for you? thank you

Try to pm this member thread starter https://forum.xda-developers.com/s7-edge/how-to/guide-how-to-fix-check-drk-imei-issues-t3379516

I have had similar issues.
If the phone does not react to any pushing of buttons, I suggest you completely let the battery drain. Just leave it for 28 hours without charge. Then charge and try again.
Second, if you can get into download mode, use samsung smart switch and or Kies to get emergency firmware recovery going. This also worked for me.
If the phone does not react after powerdrain and recharge, hand it in to a service center.

surfer3000 said:
I have had similar issues.
If the phone does not react to any pushing of buttons, I suggest you completely let the battery drain. Just leave it for 28 hours without charge. Then charge and try again.
Second, if you can get into download mode, use samsung smart switch and or Kies to get emergency firmware recovery going. This also worked for me.
If the phone does not react after powerdrain and recharge, hand it in to a service center.
Click to expand...
Click to collapse
Thanks for help, i'll try it, can i use Smart Switch from Computer? because i know i won't access into smart switch from my phone.

zefashion said:
Thanks for help, i'll try it, can i use Smart Switch from Computer? because i know i won't access into smart switch from my phone.
Click to expand...
Click to collapse
Yes SmartSwitch on the PC.
It has the recovery option. You must be able to get into Download mode on the S7

I did it. It works to drain it and recharge so i have flashed with the official nougat firmware but then bootlop at samsung logo. When i tried to force reset it. It came bacl to the blue light so now im forced to wait until it ďisappear and then recovery mode to see if i can access into it

zefashion said:
I did it. It works to drain it and recharge so i have flashed with the official nougat firmware but then bootlop at samsung logo. When i tried to force reset it. It came bacl to the blue light so now im forced to wait until it ďisappear and then recovery mode to see if i can access into it
Click to expand...
Click to collapse
Sorry if I am over simplifying but it is important to be very accurate. As you state that "you" flashed the nougat software? Sounds like you used odin or
Did you:
1) Put your phone in download mode? (not recovery)
2) Did the PC recognise your phone?
3) Did you use Samsung Smart Switch on the PC?
4) Did you use the Menu in Smart Switch on the PC: "More", "Emergency Software Recovery and Initialization" option?
5) and then choose Device initialization
6) Input your model name exactly (on the back of your samsung eg SM-G935F?)
7) Hit "OK"
Let me know what happens

surfer3000 said:
Sorry if I am over simplifying but it is important to be very accurate. As you state that "you" flashed the nougat software? Sounds like you used odin or
Did you:
1) Put your phone in download mode? (not recovery)
2) Did the PC recognise your phone?
3) Did you use Samsung Smart Switch on the PC?
4) Did you use the Menu in Smart Switch on the PC: "More", "Emergency Software Recovery and Initialization" option?
5) and then choose Device initialization
6) Input your model name exactly (on the back of your samsung eg SM-G935F?)
7) Hit "OK"
Let me know what happens
Click to expand...
Click to collapse
I'll try it this evening, because 100%'s battery to drain take about 28hrs like you said.
Hopefully your method will work for me
See you soon

He is right try to use Samsung Smart Switch it's officiall software.

Is my S7edge broken or bricked?

Had been rooted my phone before, didn't like it because I couldn't use my banking apps. Back to official firmware via Kies, been using for few months... no problem until yesterday. I charged my phone up to 92%, I unplugged and unlocked my phone, it restarted itself then never come back live again.
I used Smart Switch for another stock firmware flashing with no luck. The software skipped downloading from 85% to 100% immediately, it was ok installing system update on Smart Switch but when the phone completed and restarted, on the screen it shown "erasing" and "installing system up to 32%", it won't get pass above 32% except a blue dead android with loading icon, it freezes every time.
Full Album here, so you might get some ideas of what's going on...
http://imgur.com/a/Ad6dV
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I went to Samsung store yesterday, however once they see knox has been tripped, they refused to fix my phone unless I pay for a new motherboard which will cost me £220. :crying:
I have been trying to flash any official firmware using both Smart Switch, Samsung Kies and Odin, Android 6.0 or 7.0 and every tools lead to blue led black screen or boot looping. I have tried at least 10 times of each methods, even ADB mode, but ADB won't offer much choices except 'adb sideload' commands but it verify each package. So I cannot install TWRP recovery and so on... Odin won't install TWRP recovery as well, it failed every time.
It is sad to see this phone die on me. I have never dropped this phone and it has 0 scratch on it... still looks brand new! If anyone of you could help me out getting this baby alive, I could pay you little money.
Thanks for your time!

lovetv said:
Had been rooted my phone before, didn't like it because I couldn't use my banking apps. Back to official firmware via Kies, been using for few months... no problem until yesterday. I charged my phone up to 92%, I unplugged and unlocked my phone, it restarted itself then never come back live again.
I used Smart Switch for another stock firmware flashing with no luck. The software skipped downloading from 85% to 100% immediately, it was ok installing system update on Smart Switch but when the phone completed and restarted, on the screen it shown "erasing" and "installing system up to 32%", it won't get pass above 32% except a blue dead android with loading icon, it freezes every time.
Full Album here, so you might get some ideas of what's going on...
http://imgur.com/a/Ad6dV
I went to Samsung store yesterday, however once they see knox has been tripped, they refused to fix my phone unless I pay for a new motherboard which will cost me £220. :crying:
I have been trying to flash any official firmware using both Smart Switch, Samsung Kies and Odin, Android 6.0 or 7.0 and every tools lead to blue led black screen or boot looping. I have tried at least 10 times of each methods, even ADB mode, but ADB won't offer much choices except 'adb sideload' commands but it verify each package. So I cannot install TWRP recovery and so on... Odin won't install TWRP recovery as well, it failed every time.
It is sad to see this phone die on me. I have never dropped this phone and it has 0 scratch on it... still looks brand new! If anyone of you could help me out getting this baby alive, I could pay you little money.
Thanks for your time!
Click to expand...
Click to collapse
Take a look here https://forum.xda-developers.com/s7-edge/help/s7-edge-bug-t3331878/page12
post #114

mrsmtt said:
Take a look here https://forum.xda-developers.com/s7-edge/help/s7-edge-bug-t3331878/page12
post #114
Click to expand...
Click to collapse
I've tried this solution more than 10 times with no luck

Have you tried flashing the boot.img recovery.img ect separately? I had this kind of thing on a different Samsung and i fixed it by flashing each one separate.

Clarkiieh said:
Have you tried flashing the boot.img recovery.img ect separately? I had this kind of thing on a different Samsung and i fixed it by flashing each one separate.
Click to expand...
Click to collapse
That's good idea, which option should I use in Odin? Should be AP option right?

The files should work with their own options I'm not too sure which ones work with which, and there is a set order to flash in as well which I'm not sure about either.
---------- Post added at 03:47 PM ---------- Previous post was at 03:38 PM ----------
They all have their own button I think pal

What about fastboot flash?

I finally revived my phone!!! I'm so happy right now
I'll provide these solutions if anyone has the same issue like me. What I did altogether was:
1.0) Remove devices from your Google accounts (I had 2), wait for 48 hours to cool down? Although not sure if this option caused the bootloop, might be useful for someone...
1.1) Downloading the oldest firmware from https://www.sammobile.com flash it using Odin 3.11.1
1.2) Upload BL, AP, CP and CSC files, but I uploaded the correct Pit file too! WARNING: Be sure you know what you doing before trying to mess with this! Otherwise don't try pit file! Leave the options by default! Unless you ran out of choices!!! but I've ticked auto reboot, re-partition, f.reset time, nano erase all and bootloader update for my case. Then start to flash of course.
2.0) Phone were still crashing upon system update... I waited out the battery to drain up. Until next day... Tips: If there's no led light, try to sense it with your face if there's any temperature
2.1) Plugged in ur phone and see if there's the battery charging icon. If there is, you're in luck.
2.2) Charge until 100%, turn it on. Hopefully you can boot up now but I couldn't...
3.0) My phone was still in boot looping (Samsung Logo), I had to turn on recovery mode and wipe + format system then mount /system for whatever reason... then restart using the recovery mode...
3.1) At this time, I finally past through the boot loop which I'll be in the Google sign in screen!
4.0) Phone was in the oldest firmware, of course I will update the official firmware automatically, however the first update didn't make it, and stucked on Samsung logo again!
4.1) All I did was wait a little bit about (25mins) and reset again... somehow it fixed the issue and boot back in.
4.2) Then system update every single firmware up to the latest, boom! I'm on the latest firmware again and everything is up and running!
5.0) Extra tips: Make sure you have up to 60% battery life before turning on recovery mode, but I had to charge up to 100% for my case.
5.1) Remove FRP lock (google accounts, remove devices) might help?
5.2) On recovery mode, wipe cache and format system again might help too!
Good luck guys, I was about to give up trying after 20 flashes (Smart Switch, Kies, and Odin with different pc too!) and had to wait for battery to drain everytime if it stucks! Which annoys me but I made it!!

Glad you got it sorted ?
I would recommend Batman ROM if your willing to flash again.

Same happen to my Phone many times!
Solution!
After a few Reboots your Phone will stuck with screen of or may a blue led on (pulsing) or without any reaction (black screen, all led off) !
Now you have to wait until your battery will be empty compl. Can be up to 18 hours and more! depend how much your Mobile was loaded! or until Led light is off! is your phone still warm? Than it is still draining!You have to wait untill it is complet off and getting cool. Or, if u can, get it in the download mode, with sreen on it will be decharged faster! but mostly your phone will stay death.
After all that, Phone is cold and no Led is illuminated, plug your Phone to usb charging! Wait a little time until you can see the normal charging screen and orange Led is illuminated! (if charging screen will not upper, you have to wait longer!for decharging battery)
let it charge untill it is complet full! Dont touch! Wait at leasst 8 hours and more with charger still connected ! Best is overnight.
after this usely your phone will start normaly , without loosing any data!
Thats what helped me many times!
All my tries with bootloader, software brought nothing, just lots of waisted time and lost Data! you not need to del your phone at google!
Try this, it will work

Vollidiot said:
Same happen to my Phone many times!
Solution!
After a few Reboots your Phone will stuck with screen of or may a blue led on (pulsing) or without any reaction (black screen, all led off) !
Now you have to wait until your battery will be empty compl. Can be up to 18 hours and more! depend how much your Mobile was loaded! or until Led light is off! is your phone still warm? Than it is still draining!You have to wait untill it is complet off and getting cool. Or, if u can, get it in the download mode, with sreen on it will be decharged faster! but mostly your phone will stay death.
After all that, Phone is cold and no Led is illuminated, plug your Phone to usb charging! Wait a little time until you can see the normal charging screen and orange Led is illuminated! (if charging screen will not upper, you have to wait longer!for decharging battery)
let it charge untill it is complet full! Dont touch! Wait at leasst 8 hours and more with charger still connected ! Best is overnight.
after this usely your phone will start normaly , without loosing any data!
Thats what helped me many times!
All my tries with bootloader, software brought nothing, just lots of waisted time and lost Data! you not need to del your phone at google!
Try this, it will work
Click to expand...
Click to collapse
My phone turned out to be a faulty motherboard, went to Samsung support centre and they repaired for me within 3 working days. Now I got a sort of a new phone, it has 0 scratch since I bought it last year Feb, so it's like a new phone to me :laugh::good:
But yeah, motherboard was acting weird, was lasting a week then breaks again... finally motherboard was dead, so I could repair it without seeing the knox being triggered. Phew

x722 revive

Hello guys, i am the newest member of your commuity.
Recently i bought a leeco le pro 3 elite (x722). Now it has a problem. I was taking a snapshot of the screen in the morning and in notification are it kept showing saving screenshot (phone continued to work just ok, i an 4g video call through messenger, surfing the web, playing some games all day). Even after trying to close forcibly the notification about the save it wouldn't dissapear. In the evening i tried to do a restart and the phone shutted down and now can't turn it on. Only i can get is this when i plug it in computer:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If i put it to charge , the phone is getting charged i think, because it's starting to gain a little bit temperature (normal, like everytime when was charging) , but no blinking light or anything else. i tried a lot of combination to start up: Vol up+ power, vol down+ power, all three pressed, power button for 3 minutes, power + vol down for 2 minutes etc...
I don't get nothing not a vibration or even a blink - 0 reaction.
Can you give me an advice how to bring it back to life?

tudorm91 said:
Hello guys, i am the newest member of your commuity.
Recently i bought a leeco le pro 3 elite (x722). Now it has a problem. I was taking a snapshot of the screen in the morning and in notification are it kept showing saving screenshot (phone continued to work just ok, i an 4g video call through messenger, surfing the web, playing some games all day). Even after trying to close forcibly the notification about the save it wouldn't dissapear. In the evening i tried to do a restart and the phone shutted down and now can't turn it on. Only i can get is this when i plug it in computer:
If i put it to charge , the phone is getting charged i think, because it's starting to gain a little bit temperature (normal, like everytime when was charging) , but no blinking light or anything else. i tried a lot of combination to start up: Vol up+ power, vol down+ power, all three pressed, power button for 3 minutes, power + vol down for 2 minutes etc...
I don't get nothing not a vibration or even a blink - 0 reaction.
Can you give me an advice how to bring it back to life?
Click to expand...
Click to collapse
Need more information.
Sorry to hear about this issue.
Does it have stock software or did you attempt to install a custom Rom?
Can you boot into Recovery? (Stock or TWRP)
Can you boot to fastboot mode?
If it has stock and you just bought it, you need to immediately return it for a exchange, it sounds like its bricked. Hopefully you can get to recovery or fastboot. There is no fix for a bricked X722. If the bootloader is unlocked and you can get to fastboot there is hope.
Answering the questions above will help determine whether or not there is any solution for your X722

tsongming said:
Need more information.
Sorry to hear about this issue.
Does it have stock software or did you attempt to install a custom Rom?
Can you boot into Recovery? (Stock or TWRP)
Can you boot to fastboot mode?
If it has stock and you just bought it, you need to immediately return it for a exchange, it sounds like its bricked. Hopefully you can get to recovery or fastboot. There is no fix for a bricked X722. If the bootloader is unlocked and you can get to fastboot there is hope.
Answering the questions above will help determine whether or not there is any solution for your X722
Click to expand...
Click to collapse
no i never tried to unlock or to see status of bootloader.
i can't get anything on the screen and on computer i only get de Qualcomm qLoader driver (status). no matter what buttons i try combine when trying to power on the device i get nothing not a light or a vibration. Even the led on the upper side isn't lightning up, even if if put it to charge.

tudorm91 said:
no i never tried to unlock or to see status of bootloader.
i can't get anything on the screen and on computer i only get de Qualcomm qLoader driver (status). no matter what buttons i try combine when trying to power on the device i get nothing not a light or a vibration. Even the led on the upper side isn't lightning up, even if if put it to charge.
Click to expand...
Click to collapse
Does it have stock software?
Did you attempt installing a custom ROM, or manually update stock EUI?
If it still has the stock software and you never flashed custom software nor tried to install 5.8.26s, incorrectly then Your battery is probably dead. Possibly caused by a faulty USB C cable. You can order a battery for about $20.
Have you tried charging with another cable?
On the other hand if you attempted flashing software without unlocking the bootloader, the phone is hard bricked and there is no resolution at this moment.
Sent from my LEX727 using XDA Labs

tsongming said:
Does it have stock software?
Did you attempt installing a custom ROM, or manually update stock EUI?
If it still has the stock software and you never flashed custom software nor tried to install 5.8.26s, incorrectly then Your battery is probably dead. Possibly caused by a faulty USB C cable. You can order a battery for about $20.
Have you tried charging with another cable?
On the other hand if you attempted flashing software without unlocking the bootloader, the phone is hard bricked and there is no resolution at this moment.
Sent from my LEX727 using XDA Labs
Click to expand...
Click to collapse
No i didn't try to update or to install custom roms or enter some special mods. i just used the phone to make 4g call and some small games. I didn't even tried to put some hacked games or soft.
My phone was on a repairing center so they tried another cable, but i still get only this status Qloader 8006.

tudorm91 said:
No i didn't try to update or to install custom roms or enter some special mods. i just used the phone to make 4g call and some small games. I didn't even tried to put some hacked games or soft.
My phone was on a repairing center so they tried another cable, but i still get only this status Qloader 8006.
Click to expand...
Click to collapse
Since the battery is obviously working, somehow you phone is bricked. Maybe a shop rom was installed by the vendor?
You need to file a claim for a warranty exchange from whoever you bought the phone from., we do not have the needed Qfil software for the Leeco X722, and there is no way to repair without it. However in a worst case scenario, you can replace the motherboard.

poco m3 does not turn on anymore

I recently updated my Poco M3, it updated correctly but after that, it doesn't turn on anymore, I searched about it and I found that it was a problem with the update. I managed to turn on my phone again by pressing 13 seconds the power button, after that, I received a new update so I thought the update fixed that but when the phone rebooted to install the new update it doesn't turn on anymore. I've tried to enter fast boot mode but doesnt't works.
I don't know what should I do, I've tried again to hold on the power button and I also tried to enter fast boot but as I said it doesn't work. Also when I plug my phone to charge it, nothing happens
I hope someone can help me, and sorry for my bad English.

you need to drain your battery first. same happen to my poco m3. after that you need to flash your firmware or else it will happen again after you reboot.

vinzikidz said:
you need to drain your battery first. same happen to my poco m3. after that you need to flash your firmware or else it will happen again after you reboot.
Click to expand...
Click to collapse
And how can I flash the firmware? I've tried using the Xiaomi Flash tool but it asks me for a Mi account that is valid for the process.

charecktowa said:
And how can I flash the firmware? I've tried using the Xiaomi Flash tool but it asks me for a Mi account that is valid for the process.
Click to expand...
Click to collapse
unlock bootloader. install twrp. flash firmware

charecktowa said:
I recently updated my Poco M3, it updated correctly but after that, it doesn't turn on anymore, I searched about it and I found that it was a problem with the update. I managed to turn on my phone again by pressing 13 seconds the power button, after that, I received a new update so I thought the update fixed that but when the phone rebooted to install the new update it doesn't turn on anymore. I've tried to enter fast boot mode but doesnt't works.
I don't know what should I do, I've tried again to hold on the power button and I also tried to enter fast boot but as I said it doesn't work. Also when I plug my phone to charge it, nothing happens
I hope someone can help me, and sorry for my bad English.
Click to expand...
Click to collapse
Drain out your battery and then just plug the charger then wait.
I had this happen to me 2 times now,it would take days if your phone fully charged like mine,it takes 5 days.
After that,
make sure to backup your phone,unlock your bootloader and then re-flash the stock rom with Mi-Flash or just use another rom to your liking.
The truth is I like the stock MIUI than any other rom but if this kind of problem keep happening,I rather just flash another rom.
Hopes this help fixing your phone,sorry for the rant there.

Biggest problem with this phone is , there's no way to force reset the phone. I literally tried everything from vol up + power and volume down + power and everything else Buying this phone is prolly one of the biggest regret of my life. And the youtuber xiaomi slaves didnt help. But my real question is.... Will flashing custom rom fix this problem?

yankee77 said:
Biggest problem with this phone is , there's no way to force reset the phone. I literally tried everything from vol up + power and volume down + power and everything else Buying this phone is prolly one of the biggest regret of my life. And the youtuber xiaomi slaves didnt help. But my real question is.... Will flashing custom rom fix this problem?
Click to expand...
Click to collapse
Same question...i have experienced deadboot in this poco m3 4 times already...the only option is to remove the battery and put it back again...then hold power button to turn it on...no fastboot...no recovery mode...i dont have a choice but to open it and remove the battery...now...my question is...What if i flashed a custom rom...will it fix deadboot issue on this phone?

charecktowa said:
I recently updated my Poco M3, it updated correctly but after that, it doesn't turn on anymore, I searched about it and I found that it was a problem with the update. I managed to turn on my phone again by pressing 13 seconds the power button, after that, I received a new update so I thought the update fixed that but when the phone rebooted to install the new update it doesn't turn on anymore. I've tried to enter fast boot mode but doesnt't works.
I don't know what should I do, I've tried again to hold on the power button and I also tried to enter fast boot but as I said it doesn't work. Also when I plug my phone to charge it, nothing happens
I hope someone can help me, and sorry for my bad English.
Click to expand...
Click to collapse
have you try test point?

Hopefully this doesnt happen to anyone.. saw this vid on youtube. Basically poco m3 doesnt turn on even when battery connectors removed.

yankee77 said:
yankee77 said:
Hopefully this doesnt happen to anyone.. saw this vid on youtube. Basically poco m3 doesnt turn on even when battery connectors removed.
Click to expand...
Click to collapse
It did happen to me and I did pull the battery connector even pull the display connector while doing it.I read a post on reddit about it,pull the battery and display connector and then try connect it back while pushing the power button,the guy said the phone did turned on but whenever he tried to restart,phone would not boot and he would repeat that unplug,plug,hold power thinggy .I did try the method but nothing happened.Plug in to pc would only detect it as in EDL mode,with a locked bootloader theres nothing I can really do as flashing it would only met with this and that error.Then I read someone on a forum said to just let the phone fully discharged and try to plug in charger and wait for the battery empty logo pop on screen then the phone would boot as normal.It did work for me but I gone through nearly 5 days as my phone was fully charged.Its been like 4-5 days now and eventhough I already downloaded the latest ota for miui global,Im still dreading to install it as Im afraid the same problem would occurs again.Maybe I should unlock my bootloader first so the next time my phone goes EDL mode again,things would get easier to do.Sorry if this rants of mine a bit too long.
Click to expand...
Click to collapse

i did a factory reset.... but the phone didnt turned back on. i did do the ota update three times prior to this one which failed three times. .. the first one prolly broke the recovery and fastboot mode ... im not sure what to do after this. since i cant go to recovery or fastboot mode. this is prolly the first time i experienced this. where the ota itself which is supposed to make the phone better broke the phone. it will prolly turn on after it got drained but im not sure how to update firmware without recovery or fastboot and yes this is a ****ty phone and company alright. i send my logs to xiaomi. and still no response from them.

tnx sa share boss malaking tulong

when i heat ( about 3 to 5 sec. or more with soldering iron and flux) camera power ic under ( Power Control IC PMI632-902 ) the phone boots up
HCBE AKD written on this ic
in some other m3 phones that text is different
it has 4*3 pin under lower left side of shield
phone boots up with this method one time
if you use flux phone will be good till 1 hour power off then problem comes back
i neeeeeed schematic diagram of this phone's motherboard...
in some cases when you unplug battery
then short circuit with power key
then plug pc usb till flashing screen
after that i connect battery with holding down power key and usb connected
phone powers on from edl mode to normal mode (in some cases lcd flashes in some other battery icon shows rapidly and gets off)
ow in cit mode #27-charger test some phones we have red text battery test fail insted blue text that ask reverse plug usb type c connection)
is there another test or somting else???
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

does the phone go to fastboot with adb

Any update on this?
I have this same problem

How can I drain the batter ?

vinzikidz said:
you need to drain your battery first. same happen to my poco m3. after that you need to flash your firmware or else it will happen again after you reboot.
Click to expand...
Click to collapse
after you reflashed, did you encounter the same problems again?

pidliget said:
does the phone go to fastboot with adb
Click to expand...
Click to collapse
no just edl mode
phone current in charge is about 100 mAmp
if you heat motherboard phone turns on get charge normally and every thing is ok till you get reboot or turn phone off

vinzikidz said:
you need to drain your battery first. same happen to my poco m3. after that you need to flash your firmware or else it will happen again after you reboot.
Click to expand...
Click to collapse
How do I drain the battery

ArcherXY said:
How do I drain the battery
Click to expand...
Click to collapse
Poco m3 drains battery by itself. General rule of the thumb
1-10% - 0 to 1 day
11-20% - 2 days
Basically 1 day is around 10% of battery
I think the motherboard is on but for some odd reason the display board and basically the whole thing doesnt turn on on. But it still is draining battery even when turned off. Removing the battery doesnt fix it. I tried several times