Related
So I'm on EB13 and I can't connect to USB storage. I hit the "connect USB Storage" button but there's no response. Any ideas?
1greek4u said:
So I'm on EB13 and I can't connect to USB storage. I hit the "connect USB Storage" button but there's no response. Any ideas?
Click to expand...
Click to collapse
Do you still have the USB debugging checked in your settings>applications>development?
I ask because when I flashed EB13, it defaulted to unchecked (security, I'm sure). I spent a few hectic minutes trying to decide if I wanted to just use my sd card adapter and my computer until a fix came out or flash back to the recovery I had made. Luckily, I took a few more breaths ( LOL ) and started with the "little" things it might have been!
Hope this helps!
No, lol USB debugging was off. I kept trying to get it to work by restarting the phone, it finally worked when I pulled the battery.
1greek4u said:
No, lol USB debugging was off. I kept trying to get it to work by restarting the phone, it finally worked when I pulled the battery.
Click to expand...
Click to collapse
I had the same issue and even though I restarted several times, the ONLY thing that worked was pulling the battery for a few seconds. Strange but effective. Thanks!
if pulling battery dont work flash back to earlier version before eb13 using cwm, and then re-odin eb13...worked for me
so i'm getting this same problem, i hit the button and nothing happens, but it works fine when usb debugging is activated. starting doing it with bonsai, i flashed acs and still doing it. so i have to pull the battery to fix it?
yeah... only works with debugging turned on. forgot to add that to the bug thread for EB13. no one tested that ****ing rom
well i'm on eb13 and it was working fine yesterday without using debugging so I don't think its the rom.
Hi, I had a dodgy usb port giving mn charging issues and intermintant loss of usb disk. I have replaced this now however I keep getting unkown device when I connect this to a PC laptop etc. this happened briefly before I replaced it too, but message would disappear almost as soon as it was wired to the pc (what I mean is it would should be storage briefly then vanish), now it doesn’t show my storage at all, but does show a device connected to my machine which is progress as I have a nice snug port now, but just says unknown device. I’ve reinstalled drivers I’ve disabled usb debugging, and enabled it, tried mtp, ptp no joy just cant see my usb device, but does charge ok.
In the background my device updated to 4.4. and hence my phone is no longer rooted, but im wondering if there is residue from the previous root that is causing the port to malfunction affectively so my thoughts were to completely unroot the device. I don’t have a custom rom installed, just root. How can I get back to the scratch? Or if anyone has any suggestions or tips. I also bought a new battery and that didn’t resolve it either
i rooted my phone using ncry toolkit previoulsy
Hoping someon canhelp
Thanks
gdallas said:
Hi, I had a dodgy usb port giving mn charging issues and intermintant loss of usb disk. I have replaced this now however I keep getting unkown device when I connect this to a PC laptop etc. this happened briefly before I replaced it too, but message would disappear almost as soon as it was wired to the pc (what I mean is it would should be storage briefly then vanish), now it doesn’t show my storage at all, but does show a device connected to my machine which is progress as I have a nice snug port now, but just says unknown device. I’ve reinstalled drivers I’ve disabled usb debugging, and enabled it, tried mtp, ptp no joy just cant see my usb device, but does charge ok.
In the background my device updated to 4.4. and hence my phone is no longer rooted, but im wondering if there is residue from the previous root that is causing the port to malfunction affectively so my thoughts were to completely unroot the device. I don’t have a custom rom installed, just root. How can I get back to the scratch? Or if anyone has any suggestions or tips. I also bought a new battery and that didn’t resolve it either
i rooted my phone using ncry toolkit previoulsy
Hoping someon canhelp
Thanks
Click to expand...
Click to collapse
Try this
http://forum.xda-developers.com/showthread.php?t=2010312
mrhiab said:
Try this
http://forum.xda-developers.com/showthread.php?t=2010312
Click to expand...
Click to collapse
but my computer doesn see my n4, well it does, but says unrecognized or unkown device so i will be unable to carryou ot thise steps you posted, but thanks anyway .
gdallas said:
but my computer doesn see my n4, well it does, but says unrecognized or unkown device so i will be unable to carryou ot thise steps you posted, but thanks anyway .
Click to expand...
Click to collapse
I have the same issue. Any solutions?
Same issue here. You guys also experiencing extreme battery drain?
Sent from my Nexus 4 using Tapatalk
magote said:
Same issue here. You guys also experiencing extreme battery drain?
Sent from my Nexus 4 using Tapatalk
Click to expand...
Click to collapse
Same Problem Here. And Yes i have too a extreme battery drain
danielmm1997 said:
Same Problem Here. And Yes i have too a extreme battery drain
Click to expand...
Click to collapse
Me too. Im using LMY48I. I cant figure out whats wrong...
Im having an issue with my phone connecting to computer. I'm trying to get back to stock but have no way in getting into odin without usb. I think their is a problem with something on the phone it isn't a pc or cable problem. I also had a new flex port recently installed. My phone will charge when connected to computer but it will not sync nor even recognized by device manager. I cant find any info anywhere with this issue. I try to enable mtp through hidden menu using *#0808# but it wont stay enabled resets after reboot. I also cant find menu under settings for usb. There use to be a menu in storage but it seems like its not there anymore. im on beans 4.4.2 nc4 with nc2 bootloader. can't find a solution nowhere.
I have the same problem, been trying to search online for few days, can't find the solutions.
Sammguy said:
Im having an issue with my phone connecting to computer. I'm trying to get back to stock but have no way in getting into odin without usb. I think their is a problem with something on the phone it isn't a pc or cable problem. I also had a new flex port recently installed. My phone will charge when connected to computer but it will not sync nor even recognized by device manager. I cant find any info anywhere with this issue. I try to enable mtp through hidden menu using *#0808# but it wont stay enabled resets after reboot. I also cant find menu under settings for usb. There use to be a menu in storage but it seems like its not there anymore. im on beans 4.4.2 nc4 with nc2 bootloader. can find a solution nowhere.
Click to expand...
Click to collapse
bryanling said:
I have the same problem, been trying to search online for few days, can't find the solutions.
Click to expand...
Click to collapse
Try dl'g the Sammy drivers directly from here and just click on the "See all Downloads", click "Send" and save the .exe file.
Run it as administrator, and once complete, plug in phone and that should correct the pc to phone issue.
shaggy_kobain said:
Try dl'g the Sammy drivers directly from here and just click on the "See all Downloads", click "Send" and save the .exe file.
Run it as administrator, and once complete, plug in phone and that should correct the pc to phone issue.
Click to expand...
Click to collapse
Actually it's my phone problem, i try on 10++ pc, all are not working :crying:
bryanling said:
Actually it's my phone problem, i try on 10++ pc, all are not working :crying:
Click to expand...
Click to collapse
Enable developer mode (tap on settings, about and then tap on the build number 7 times to enable developer mode).
Then back to settings, developer options and turn on usb debugging.
Sent from my Note 3 via Tapatalk
. I have original VZ driver installed. and i tried running as admin
Already tried this. On multiple computers. It's not a driver problem it has to do with something that happen after flashing to the leaked kitkat. I flashed beans kitkat and firmware through odin and since then wasnt able to connect to computer via usb. I read somewhere you could flash back to mje but not sure if i could do that without odin. I covered all the basics including enabling developer mode etc.... Kies doesn't work either and that was suppose to be bullet proof. I vaguely remember something similar happening when we got Root de la Vega some people lost usb after flashing and couldn't odin back but cant find that thread with what they did to fix it.
Sammguy said:
. I have original VZ driver installed. and i tried running as admin
Already tried this. On multiple computers. It's not a driver problem it has to do with something that happen after flashing to the leaked kitkat. I flashed beans kitkat and firmware through odin and since then wasnt able to connect to computer via usb. I read somewhere you could flash back to mje but not sure if i could do that without odin. I covered all the basics including enabling developer mode etc.... Kies doesn't work either and that was suppose to be bullet proof. I vaguely remember something similar happening when we got Root de la Vega some people lost usb after flashing and couldn't odin back but cant find that thread with what they did to fix it.
Click to expand...
Click to collapse
Did you disable the mtp application?
drewcam888 said:
Did you disable the mtp application?
Click to expand...
Click to collapse
Do you mean through hidden menu or should there be an app on the phone? I didn't disable it i tried to enable it through hidden menu because it wasn't working but it just resets after rebooting the phone. Also there use to be a menu in storage under settings i could get to but it no longer exists. If you go into settings- storage- it should be a button in the top right corner of your screen which leads you into settings for mtp but it's not there.
Sammguy said:
Do you mean through hidden menu or should there be an app on the phone? I didn't disable it i tried to enable it through hidden menu because it wasn't working but it just resets after rebooting the phone. Also there use to be a menu in storage under settings i could get to but it no longer exists. If you go into settings- storage- it should be a button in the top right corner of your screen which leads you into settings for mtp but it's not there.
Click to expand...
Click to collapse
I too am having this issue... it is quite frustrating. I rooted using towel root and that worked fine up until the beginning of September then USB was gone gone gone!. I was thinking of just doing a factory-restore of my phone, but I am not sure that is possible with having Towel rooted my phone. I just don't know what steps to take. Any help would be greatly appreciated!
i am going to the local verizon store today and if they can not fix this, then i see no reason for me to continue to pay for my phone. there obviously is something wrong with all these phones that people are complaining about. i have been on the phone with verizon and samsung for HOURS. i now am a pro at knowing what's wrong but no one can help me. It does not stay in MTP mode or PTP and goes back to charging. this is a phone problem that should not even exsist. plug your phone in, upload pics. has anyone gotten verizon to replace the phone????that's my goal today
It takes two to tango; how do you know the problem is not the PC?
Older versions of stock software actually put the phone in Airplane Mode when you were using USB 3.0, and had an inactivity timer or something that would turn the USB link off after a while. That didn't happen if you were operating on a USB 2.0 link.
So, if your PC has any non-USB 3.0 ports (the connector will not be blue) you could try using a USB 2.0 port.
Sometimes intermittent behavior is caused by bad cabling or a damaged connector, so a second thing to try is using a replacement cable and/or alternate ports. (Don't buy bargain basement eBay $2 cables btw - you will get what you pay for)
good luck
nancyvf8 said:
i am going to the local verizon store today and if they can not fix this, then i see no reason for me to continue to pay for my phone. there obviously is something wrong with all these phones that people are complaining about. i have been on the phone with verizon and samsung for HOURS. i now am a pro at knowing what's wrong but no one can help me. It does not stay in MTP mode or PTP and goes back to charging. this is a phone problem that should not even exsist. plug your phone in, upload pics. has anyone gotten verizon to replace the phone????that's my goal today
Click to expand...
Click to collapse
Is this a phone that you flashed a custom rom, rooted, or unlocked the bootloader?
I have google this for hours with nothing! I connect my Nexus 6P to my PC and it doesn't recognize it and not only that but the usb connection options doesn't show up on the phone either. I am completely lost!
I have installed the drivers multiple times, i have looked up the mtp inf drivers and nothing happens. When I connect it to the computer it only says chaging on the lockscreen thats it! I have no idea how to fix this. I am trying to go back to stock because i lost root flashing a custom nougat build. everything works except twpt won't boot up anymore and just hangs at the splash screen. and of course I don't have root. can anyone please help me! thanks
117micc said:
I have google this for hours with nothing! I connect my Nexus 6P to my PC and it doesn't recognize it and not only that but the usb connection options doesn't show up on the phone either. I am completely lost!
I have installed the drivers multiple times, i have looked up the mtp inf drivers and nothing happens. When I connect it to the computer it only says chaging on the lockscreen thats it! I have no idea how to fix this. I am trying to go back to stock because i lost root flashing a custom nougat build. everything works except twpt won't boot up anymore and just hangs at the splash screen. and of course I don't have root. can anyone please help me! thanks
Click to expand...
Click to collapse
Have you tried a different cord? If its not the cord the inspect the port on your phone to make sure no lint or crud is physically blocking some pins. Do you have developer options enabled? Maybe something got changed in there. Its never happened to me so these are just guesses. Maybe somebody smarter can help.
117micc said:
I have google this for hours with nothing! I connect my Nexus 6P to my PC and it doesn't recognize it and not only that but the usb connection options doesn't show up on the phone either. I am completely lost!
I have installed the drivers multiple times, i have looked up the mtp inf drivers and nothing happens. When I connect it to the computer it only says chaging on the lockscreen thats it! I have no idea how to fix this. I am trying to go back to stock because i lost root flashing a custom nougat build. everything works except twpt won't boot up anymore and just hangs at the splash screen. and of course I don't have root. can anyone please help me! thanks
Click to expand...
Click to collapse
Mine gives a notification that the phone is charging when I connect to computer but if I click the notification it gives me the option to transfer files instead. You do have USB Debugging enabled on the Developers Menu, correct?
Hello guys
I have the same problem on my phone i tried everything i found on google and other forums, and the last option that i couldn't do is to send my phone to replace the usb port, but i have no warranty as i bought it already used. It's a shame that no one can find a solution here especially that the other forums at least tried to fix for some people but not here on xda which is the first in the world.
driss.sadok said:
Hello guys
I have the same problem on my phone i tried everything i found on google and other forums, and the last option that i couldn't do is to send my phone to replace the usb port, but i have no warranty as i bought it already used. It's a shame that no one can find a solution here especially that the other forums at least tried to fix for some people but not here on xda which is the first in the world.
Click to expand...
Click to collapse
I've even changed my USB port and daughterboard twice. I am stumped. I got 3 laptops 2 running 10 and one running Ubuntu and mAid along with a tower running xp. I fix unfixable phones and resell them. I've tried EVERYTHING. I know this is an old thread but Any help would be appreciated.
Hi,
since one of the latest Oxygen OS updates, my OnePlus 5 is not able to connect to any PC anymore as long as USB-Debugging is enabled. It's not showing up in Device-Manager nor lsusb on multiple PCs, I've tried rebooting multiple times, safe mode, clearing settings data, but nothing seems to have changed it's behavior - when turning on USB Debugging, all USB connections seem to get lost, including data and charging. A curious thing I noticed is that the Android-System notification that lets you switch USB modes sticks around when unplugging in this state, even after disabling debugging again, until the phone is restarted.
Is this a common issue? I haven't been able to find anything about it on XDA or on their official product forums which seem to be pretty dead, but it's a pretty big problem for me since I need this phone for app development.
Thanks!
armibu said:
Hi,
since one of the latest Oxygen OS updates, my OnePlus 5 is not able to connect to any PC anymore as long as USB-Debugging is enabled. It's not showing up in Device-Manager nor lsusb on multiple PCs, I've tried rebooting multiple times, safe mode, clearing settings data, but nothing seems to have changed it's behavior - when turning on USB Debugging, all USB connections seem to get lost, including data and charging. A curious thing I noticed is that the Android-System notification that lets you switch USB modes sticks around when unplugging in this state, even after disabling debugging again, until the phone is restarted.
Is this a common issue? I haven't been able to find anything about it on XDA or on their official product forums which seem to be pretty dead, but it's a pretty big problem for me since I need this phone for app development.
Thanks!
Click to expand...
Click to collapse
Open beta or stable? Which version exactly?
strongst said:
Open beta or stable? Which version exactly?
Click to expand...
Click to collapse
I'm running the current stable Oxygen OS 5.1.5(ONEPLUS A500_23_180808), unrooted. I'll try installing the new beta, since fastboot mode still gets recognized by PCs.
Ok, so beta 19 didn't change anything about it - still the same issue and behavior when unplugging. Not sure what else to do other than trying to wipe it, which would be pretty annoying
I have the same problem and I can not solve it neither with usb debuginc or mtp and I see that Oneplus is not bothering att all about this problem. I need to transfer some data from my computer to my phone and I am stucked. I am thinking sending to warranty or sell it! I was a big fun but now........
lhoria46 said:
I have the same problem and I can not solve it neither with usb debuginc or mtp and I see that Oneplus is not bothering att all about this problem. I need to transfer some data from my computer to my phone and I am stucked. I am thinking sending to warranty or sell it! I was a big fun but now........
Click to expand...
Click to collapse
You have not the same problem... Op wants to transfer data while usb debugging is on. But it works only when usb debugging is off.
Yes I have. O tried all the combination but it is just not working, with debugging on or off. I should aopreciate litle help.
Thank you
lhoria46 said:
Yes I have. O tried all the combination but it is just not working, with debugging on or off. I should aopreciate litle help.
Thank you
Click to expand...
Click to collapse
The op can transfer files with USB debugging disabled. You can not. So you have another issue please read OP again
Thanks smart guy but can I solve this problem? Even op want to transfer data from pc to the phone and reverse with usb debugg off I can not. It is written usb not recognize.
Thank you in advance.
armibu said:
Ok, so beta 19 didn't change anything about it - still the same issue and behavior when unplugging. Not sure what else to do other than trying to wipe it, which would be pretty annoying
Click to expand...
Click to collapse
lhoria46 said:
Thanks smart guy but can I solve this problem? Even op want to transfer data from pc to the phone and reverse with usb debugg off I can not. It is written usb not recognize.
Thank you in advance.
Click to expand...
Click to collapse
I'm on OB19, rooted with magisk 17.2 and with USB debugging enabled or disabled im getting file transfer working on 2 win10 pc's.
The pop-up is immediately present after plugging into USB port(original cable or other USB cable).
Msybe: Toggling file transfer to charging and back can help you?
strongst said:
I'm on OB19, rooted with magisk 17.2 and with USB debugging enabled or disabled im getting file transfer working on 2 win10 pc's.
The pop-up is immediately present after plugging into USB port(original cable or other USB cable).
Msybe: Toggling file transfer to charging and back can help you?
Click to expand...
Click to collapse
I've tried this a few times, the options in that pop-up don't have any effect whatsoever after enabling USB debugging and unplugging/plugging the phone back in. Also tried changing the default setting, which doesn't seem to have any effect either though.
Same for me. No effect att all. I don't lnpw what to do. I have a lot of files in storage and I can not root my phone and try another Rom.
Help!!!
I have done all the possibel combinations.
armibu said:
I've tried this a few times, the options in that pop-up don't have any effect whatsoever after enabling USB debugging and unplugging/plugging the phone back in. Also tried changing the default setting, which doesn't seem to have any effect either though.
Click to expand...
Click to collapse
lhoria46 said:
Same for me. No effect att all. I don't lnpw what to do. I have a lot of files in storage and I can not root my phone and try another Rom.
Help!!!
I have done all the possibel combinations.
Click to expand...
Click to collapse
Have you tried another PC, checked your driver, firewall etc?
Common issue across all devices
Just a suggestion.
Yes I did it on two Pc and with two diffrent cables. One day it worked 3 minutes and the problem suddenly came back without takig off the cabel from Pc.
lhoria46 said:
Yes I did it on two Pc and with two diffrent cables. One day it worked 3 minutes and the problem suddenly came back without takig off the cabel from Pc.
Click to expand...
Click to collapse
And you have which oxygenOS version?
The latest update OEM 8.1.0 version OPC O2 19 BETA but the problems begun before loadin this uodate. The reason I put this one was exact that I wasn't able to do nothing.
lhoria46 said:
The latest update OEM 8.1.0 version OPC O2 19 BETA but the problems begun before loadin this uodate. The reason I put this one was exact that I wasn't able to do nothing.
Click to expand...
Click to collapse
Really strange... OOS 5.1.5 and OB19 and before.
Never had any issues and also others not report such issues