[Q] CWM Recovery for AT&T I337UCUFNJ4 possible? - Galaxy S 4 Q&A, Help & Troubleshooting

Hey guys/gals I know this might be a noob question but I've been looking for a solution all evening.
I recently decided I wanted to install Cyanogen Mod on my GS4 from AT&T but I had already upgraded to 4.4.4 KitKat... (I337UCUFNJ4)
Is it still possible for me to install CWM Recovery? I managed to Root the phone using this guide
unfortunately trying to install ROM Manager just results the phone booting into the default recovery mode and not CWM Recovery.
Any help is greatly appreciated.
Thank you!
Phil

Look for SafeStrap in the AT&T Galaxy S4 forums. It is the only recovery that will work with your S4 as AT&T's bootloader is encrypted, a.k.a. locked. The encryption means no custom ROMs. SafeStrap gets around that problem.

Related

[Q] Please help me flash an upgraded OS to my device

Hi all, I want to install a 4.4.4 ROM. I haven't been around the forums for a while (I've been satisfied with my rooted stock 4.2.2 MDL), but now I feel it is time to upgrade.
First off, the recovery I have right now is CWM 6.0.3.2 touch recovery. Is that OK? Or is it outdated? Does it have auto-loki?
Secondly, will I still be rooted after upgrading to 4.4.4? If not, is there a known root process?
Thanks to all! I really want to get back into the stock Android scene.

[Q] Unable to install custom recovery on Note 3

Hi guys,
Not sure of this wss covered already but i was unable to locate anything that helps
I currently have a Galaxy Note 3 n9005 international LTE version with stock kitkat installed 4.4.2. The phone is rooted which i did upon receiving it and have super user 2.0 installed. i have confirmed root with titanium back.
Now i wanted to try a custom rom and tried to install the new phillz touch recovery but observed that it kept failing in odin (tried several times) i even tried to install a custom recovery via ROM Manager which it said the update was complete but when ever i boot into recovery mode i keep get the stock android recovery.
i have search and cannot find anything that help so here i am.
My Android version N9005XXUENC2 AND Kernel version is 3.4.0-636608 dpi @SWDD5619 #1
From my understanding once u root it should have install a custom recovery. When i got the phone it came with Jelly bean 4.3 and i rooted then updated to kitkat, could this be the issue. Does that mean i have root again?
Any assistance given is greatly appreciated.
I have the same Problem rooted with towelroot work fine with knox 0x0 and i have testet it with Rom Manager and with Rom installer have installed twrp and cwm all Not work sorry 4 the Bad english.
Sent from my SM-N9005 using XDA Premium 4 mobile app
FarDablinG said:
Hi guys,
Not sure of this wss covered already but i was unable to locate anything that helps
I currently have a Galaxy Note 3 n9005 international LTE version with stock kitkat installed 4.4.2. The phone is rooted which i did upon receiving it and have super user 2.0 installed. i have confirmed root with titanium back.
Now i wanted to try a custom rom and tried to install the new phillz touch recovery but observed that it kept failing in odin (tried several times) i even tried to install a custom recovery via ROM Manager which it said the update was complete but when ever i boot into recovery mode i keep get the stock android recovery.
i have search and cannot find anything that help so here i am.
My Android version N9005XXUENC2 AND Kernel version is 3.4.0-636608 dpi @SWDD5619 #1
From my understanding once u root it should have install a custom recovery. When i got the phone it came with Jelly bean 4.3 and i rooted then updated to kitkat, could this be the issue. Does that mean i have root again?
Any assistance given is greatly appreciated.
Click to expand...
Click to collapse
If you have updated via Kies, i think you lost the root access. Download a root checker app and check the root status.

[Q] G900R7 problem

I have a Samsung Galaxy S5 G900R7 rooted with towelroot. I want to flash twrp custom recovery but I'm not sure which way I should do this. I tried to use twrp's Google play app but it didn't have my phone's "codename". I had a rooted s4 with twrp and cm so I'm not a complete newbie. I just need a little help figuring out how I should do this.
Please help.
So far, only Dev. Edition S5 with an unlocked bootloader can flash a custom recovery like TWRP. More than likely you have yourself a retail version of the phone with a locked bootloader like the rest of us. The closest to a custom recovery we can get is Safestrap. I dont really know if the g900r7 is identical to the g900v so i would use caution of you want to try any of the methods here in this forum for root or to flash safestrap. A quick google search for your phone didnt provide much detail about it.

Few questions on TWRP install and 6.0 flashing

Hi all, I wanted to get some info on this topic, I have done allot of searching/reading and still have a bit of confusion. Currently I have a SGH-I337 AT&T S4 that is running 5.0.1 that I rooted. I want to update to the custom 6.0 ROM, which I downloaded from the JDC Team along with Gapps and superSU 2.52. I am going to follow the directions on their thread, but my issue is flashing the latest correct version of TWRP. I am able to boot into recovery and when Im flashing the TWRP version they have on their site (recovery,flash from SD, TWRP-2.8.7.2-F2FS.ZIP) I get a footer and authenticate error. Im assuming this version of TWRP is not compatible with this ver. S4? Or is there another way I have to flash it to the phone. Please point me to a thread that has the steps to do this if possible.
jgig73 said:
Hi all, I wanted to get some info on this topic, I have done allot of searching/reading and still have a bit of confusion. Currently I have a SGH-I337 AT&T S4 that is running 5.0.1 that I rooted. I want to update to the custom 6.0 ROM, which I downloaded from the JDC Team along with Gapps and superSU 2.52. I am going to follow the directions on their thread, but my issue is flashing the latest correct version of TWRP. I am able to boot into recovery and when Im flashing the TWRP version they have on their site (recovery,flash from SD, TWRP-2.8.7.2-F2FS.ZIP) I get a footer and authenticate error. Im assuming this version of TWRP is not compatible with this ver. S4? Or is there another way I have to flash it to the phone. Please point me to a thread that has the steps to do this if possible.
Click to expand...
Click to collapse
Your phone has the newer bootloader which is locked. Only variants with older bootloader, mdl and mdb will be able to flash twrp.
You can still use flashfire but your options are limited and marshmallow isn't one of them.
Airtioteclint said:
Your phone has the newer bootloader which is locked. Only variants with older bootloader, mdl and mdb will be able to flash twrp.
You can still use flashfire but your options are limited and marshmallow isn't one of them.
Click to expand...
Click to collapse
Thanks..
jgig73 said:
Hi all, I wanted to get some info on this topic, I have done allot of searching/reading and still have a bit of confusion. Currently I have a SGH-I337 AT&T S4 that is running 5.0.1 that I rooted. I want to update to the custom 6.0 ROM, which I downloaded from the JDC Team along with Gapps and superSU 2.52. I am going to follow the directions on their thread, but my issue is flashing the latest correct version of TWRP. I am able to boot into recovery and when Im flashing the TWRP version they have on their site (recovery,flash from SD, TWRP-2.8.7.2-F2FS.ZIP) I get a footer and authenticate error. Im assuming this version of TWRP is not compatible with this ver. S4? Or is there another way I have to flash it to the phone. Please point me to a thread that has the steps to do this if possible.
Click to expand...
Click to collapse
Currently I have the same phone and carrier...
If you are still interested in a custom recovery our only option is SafeStrap Recovery, you might want to check out this thread: http://forum.xda-developers.com/showthread.php?t=2448925. I was able to install SafeStrap and utilize NC1 Flasher to facilitate booting into SafeStrap Recovery with no problems whatsoever. Once you have SafeStrap Recovery operational on your phone you can also flash custom TouchWiz ROM's.
I hope that helps and, I'm far from an expert but, don't hesitate asking any questions!
PEACE

Sprint s4 sph l720 GOK3 5.0.1 root help

Hello everyone, I have the sprint sph l720 5.0.1 GOK3 lollipop OTA. Could someone please point me in the direction of how to get it rooted and how to flash custom roms. I've rooted and flashed before. But that was before bootloaders started being locked and what not. Is this build available to have the bootloader unlocked , and flash custom recovery and roms? I don't care about warranty so I just need some help doing this please. Thank you for your time and help in advance
Im also looking for a rom for my s4 sph-l720t 5.0.1 GOK3. Im running on ringplus and see plenty of roms for l720 but not for l720t. Thanks to all the devs.
rainprophet said:
Im also looking for a rom for my s4 sph-l720t 5.0.1 GOK3. Im running on ringplus and see plenty of roms for l720 but not for l720t. Thanks to all the devs.
Click to expand...
Click to collapse
Pull battery from phone, put it back in and go directly into download mode. Flash TWRP via Odin, (uncheck reboot and the set time option. Once flashed unplug from computer, pull battery, put battery back in and go directly to recovery and flash latest working SuperSU and reboot phone. You might also have to install the SuperSU app from play store as well

Categories

Resources