Related
Zagg Invinsible shield?
Brando?
CP SCREEN PROTECTOR?
Other?
Which one is least visible and leaves no bubbles?
Expert Shield is by far the best i have come across.
shouldn't this be posted in Blackstone accessories ?
The best screen protector is BRANDO protector,
always buying this and definitely the best.
Durable, you can wash them and reuse, etc...
here is link:
http://shop.brando.com.hk/prod_detail.php?prod_id=02912&dept_id=039&cat_id=0980
Proporta !!!
Hey ,
This one works realy fine for me . Not the easiest to put on.
But seems indistructible and washable.
And looks very cool on my Blackstone.
http://www.proporta.com/F02/PPF02P05.php?t_id=4097&t_mode=des
better think twice before using a mirrored screen protector! yes they do look cool, but the glare makes the hd impossible to use outside or in bright light conditions (much worse than normal), and occasionally frustrating in normal light. they also magnify fingerprints and smudges horribly. i'm constantly rubbing mine against my shirt to clean it
i bought a pack of two and gave one to my daughter and it didnt last the day before she pulled it off. i'm considering a brando non-mirrored in the next week or two.. i really dont like it. ifyour in a dimly lit office all day, it might work for you
Vikuiti DQC160 3M Screen Protector for HTC Touch HD, by far the best screen protector i have used. Not even one scratch after 2 months and very easy aplication.
http://www.amazon.de/Vikuiti-DQC-16...=sr_1_2?ie=UTF8&s=ce-de&qid=1233388812&sr=8-2
Brando is very very good
Martin Fields for me.
lucian777 said:
Vikuiti DQC160 3M Screen Protector for HTC Touch HD, by far the best screen protector i have used. Not even one scratch after 2 months and very easy aplication.
http://www.amazon.de/Vikuiti-DQC-16...=sr_1_2?ie=UTF8&s=ce-de&qid=1233388812&sr=8-2
Click to expand...
Click to collapse
This might be a stupid question, but that screen protector isn't on the us version of amazon. Google will not translate the page either... Therefore, how does a non-dutch speaking person order one of these?
I really like 3m products.. Anyone?
I'm quite happy with EXIM screen protectors :
http://www.eximstyle.com/productpage/sp_SPUC.html
My vote goes to Brando crystal clear - very good, can't see it there, and touch is the same.
SomethingWicked said:
This might be a stupid question, but that screen protector isn't on the us version of amazon. Google will not translate the page either... Therefore, how does a non-dutch speaking person order one of these?
I really like 3m products.. Anyone?
Click to expand...
Click to collapse
I'm from Europe ..and i speak dutch..by the way this is the translated page from google
http://translate.google.com/transla...1233388812&sr=8-2&sl=de&tl=en&history_state0=
I have tried almost all the above mentioned screen protectors but Martin fields and i can say with pride that if you want your device to last for years looking same GO for INVISIBLE SHIELD. With brando, you have to change every few month otherwise the scratches start to appear on the protector
Yeah, but the Invisible Shield just looks so bleh. No way to get the film to fit flush along the border of the screen where it meets the body of the phone. The film just floats in that area, basically creating a void that appears as an air bubble along the whole perimeter of the screen.
They really weren't thinking when they made the cut for that film. No reason not to have made one dedicated piece for the screen, separate from the side of the phone body. If they took one second to have actually looked at the phone itself, they would have realized this.
It does help give a better grip/handle on the phone, due to the silicon material. However, it just looks ... eh. Certainly not invisible. At all. It does change the look of the phone. Looks much cheaper. But I guess scratches'll do that too.
That silicon material also changes the feel of interacting with the touch screen. It does have some give to it. So it feels like you get more compression as the stylus sinks into it. And your fingers/stylus will not glide as easily as you might expect for this type of input method. It's not a hindrance, per se, but it will be different.
Installed the front and the bottom piece. Stopped there. Didn't want that glossy rubber-like material covering the flat-black rubber-tone finish of the back cover and the brushed aluminum finish surrounding the lens.
Would really like a dedicated film for the screen that kept the same physical feel of the screen - more like a glassy/plastic film - and a separate one that protected all the glossy black lacquer finished pieces.
The Zagg Invisible Shield is rubbish. It tries to cover the screen and the chrome bits around the screen with the same piece, so it doesn't fit as well as it should
harrispo said:
The Zagg Invisible Shield is rubbish. It tries to cover the screen and the chrome bits around the screen with the same piece, so it doesn't fit as well as it should
Click to expand...
Click to collapse
I guess you got the limited bling edition.
are there any anti-glare screen protector around, like the iphone one? Been searching around but couldn't find any, would be good if there are plans for it.
there are many, almost all manufactures have a clear and a non-reflecting version. I use Exim crystal clear protector and Im very, very happy!! I have it since the first days I bought my blackstone (I bought it on November, 21st) and it lasts until now, without any issue!! I'm using my phone full-time, about 6 hours a day, non-stop, so I think this is a really good protection! and it looks like it's not there so, decide yourself, the problem with non-reflective ones is, that you have not such a clear view, but it's only minimal. For me anyway, I need to have a very clear one, cause I'm most of the time inside buildings and I want for watching movies, have absolute clear screen^^ that's it
lucian777 said:
I'm from Europe ..and i speak dutch..by the way this is the translated page from google
http://translate.google.com/transla...1233388812&sr=8-2&sl=de&tl=en&history_state0=
Click to expand...
Click to collapse
thanks... but when i clicked to add one to the basket, google stopped translating, so i was stuck. so i ordered a brando protector. the mirrored one was way cool and very impressive, but i drive a lot, and it made my hd unusable when the sun was out. so bad that i pulled it off and my hd is unprotected untill the brando arrives
Hi!
I got my hands on ZAGG's invisibleSHIELD for X10, it's on the way thru delivery.
I saw their videos, and it's seem hype.
Anyone have personal experience with this product?
Also, right now, I have a rubber-not-so-tight-fit casing for the X10, but I want to get one that has tight-fit, real tight fit rubber casing to put on after the invisible shield? Recommendations?
Something in the lines that matches with iSkin, that the have for the "not so hype" iPhone...
If you go up a level to the Sony Xperia X10 menu page and have a look in the accessories subsection there is a lot of info on cases and screen protectors etc which might be helpful to you.
I bought Zagg's full body invisible shield before for my SE Satio. They were difficult to apply. Also, the screen responsivenss was better on the stock screen protector. You dont really need to replace it if yours came with one. The Zagg screen protector feels sticky to the touch. Not so good on a capacitive screen
Zagg's invisibleshield is horrible. My buddy got one for his x10, and I applied it. Every piece was not cut precise except the back cover. The front screen protector wasn't even cut straight. The left and right borders were tapered in the middle leaving about 2mm of space, on each side, between the border and the screen protector.
From my own experience with the product on my x1, the full body shield turns yellow and traps tons of dirt at the edges. It just looks cheap over time.
Backcover? People actually _like_ having slippery backs? Imo the stock coating is optimal since it's very grippable, it's rugged and it doesn't gather any fingerprints.
ddewbofh said:
Backcover? People actually _like_ having slippery backs? Imo the stock coating is optimal since it's very grippable, it's rugged and it doesn't gather any fingerprints.
Click to expand...
Click to collapse
Well, I was just stating a fact that it does come with a back shield, and it's the best cut piece of the set. While I do like the bare back feel of the x10, the option is there for people to use it or not use it.
I got myself a Martin Fields screen protector. Applied it today. So far really loving it. Will review it soon.
InvisibleSHIELD is also supposed to be real good, but a pain to apply correctly.
needmoregigs said:
Zagg's invisibleshield is horrible. My buddy got one for his x10, and I applied it. Every piece was not cut precise except the back cover. The front screen protector wasn't even cut straight. The left and right borders were tapered in the middle leaving about 2mm of space, on each side, between the border and the screen protector.
From my own experience with the product on my x1, the full body shield turns yellow and traps tons of dirt at the edges. It just looks cheap over time.
Click to expand...
Click to collapse
I had the same experience with my Zagg sheild. Tappered sides and what not. Anyway I am not a fan. What I would like to know is if there is similiar screen shields to the ones for the iphone?? They have almost the texture of a sheet of paper, never streak and seem to provide excellent responsiveness. Im not sure of the different types of protectors but if someone knows of one like this let me know!
Also the Zagg shield on the back of the X10 is actually pretty sweet......its not slippery. In fact its the exact opposite. You can set the thing down on the dash of the car while charging and it will not slide around at all. But hey, if thats worth $20 then have at it.
Not bad...
I have the invisibleSHIELD for my X10 and it's not to shab... but not too good...
As with one of the posts above, the front screen protector was not cut to fit properly; there is a gap on my screen about 1/4" on the right side, however the left side is flush. I emailed Zagg about it and they have sent me a new one and apologized that the case was damaged during shipping (although it was very clearly NOT damaged during shipping, it was just cut that way).
The rest of the case fits snug, but it does get dirty/sticky on the edges. I will be getting another case to put over it; likely the FlexiShield.
I personally like the feel of the screen protector more than the stock protector. I have both of them on right now and have no issues with the touchscreen whatsoever. The Zagg shield never fingerprints, but it would with the stock protector.
Overall, I would give the invisibleSHIELD a 7 out of 10. If I was rating the screen protector alone I would give it 8 out of 10 (points dinged for the improper fit, hopefully the replacement sits flush).
If you are like me and want a mint looking phone you might get a little frustrated by the scummy edges, however the material is strong and you will definitely not scratch anything. I recommend doing away with the full body case and just getting the screen cover in combination with another case!
Cheers!
Update: Received the replacement but the screen protector is even more tapered on the edges than my original. I've scrapped the shield and went with a plastic fitted case. Too bad, I really like the quality of the material. I'm going to try and get a refund.
Wow! Judging by the reviews, I am not glad that I went for MF instead of ZAGG.
I got protech which is essentially the same thing and I have to say its pretty good. I've used invisible sheiks in the past on a g1 and found it was easier to apply to the x10. You have to be really patient though if you leave the smallest air bubble on the edge as previously mentioned dirt and dust gets trapped underneath and starts to peel.
Sent from my X10a using XDA App
I have full body Zagg ... it sux.
The size of the front part is not right so i have about 2mm on edges which are not covered.
The top, bottom and side parts are already gone.
The back part is still there ... for now.
I have a gadget shieldz full body.
I'll try it in about 2 weeks when the zagg will be gone.
Zagg lasted about 3 months.
I have the Martin Fields one bought from Mobile Fun. It is the biggest fingerprint magnet in the history of phones. I bought the double pack thinking I'd have a spare as back up. The actual screen applies beautifully but it has lifted in the top right hand corner near the proximity sensor. I managed to reapply it without taking it off totally but its still not perfect.
I want the same shield we bought for hubby's Iphone. Its a matt anti reflective one and shows no finger marks. I spend my life cleaning smudgy prints off mine.
To clear out what others said and my experience with zagg shield,
It all comes to how accurate are you when attaching it.
But if you want some advice, just put the back part only. The stock screen protector is much better, the side parts are too hard to put on.
and take care They are very stretchable. ..
Sent from my X10i using XDA App
I agree, the Zagg screen protector makes the screen slightly sticky or something. Makes it hard to drag things across the screen like when moving cards in Solitaire etc. I'm on the lookout for a good screen protector now, wish i never removed the stock one!
I actually like the feel and look of the back protector and yes, the side and bottom protectors are a bit too finicky and strechy for clumsy people like me to put on properly!
Painfull Installation - Happy Though!
Hey!
So, I finally had time over the weekend to apply the invisibleShield to my X10, the full-body, "maximum protection" version.
Just let me tell you:
(1) Painfull process - took nearly 2 hours from start to finish, minus break / re-doing time because i wasn't completely satisfied.
(2) Not enough solution - the spray bottle they gave is enough for 1 time installation only! No room for mistakes. Found out the solution was Johnson's brand baby shampoo & distilled water (I didn't have any distilled water, instead, used a new bottle water from Nestle brand) ... worked like a charm
(3) sizing - oh man! the sizing of the invisible shield is not perfect, except for the back piece ... front has gaps, 1/2mm or less on either side.
(4) Applying ... it took me about 3 times to get it right, fitted accordingly. That's how I ran out of the solutions.
(5) Squeeze is not good on small pieces, better to use a q-tip to slide thru the solutions off.
Overrall, it's a different feeling. Getting used to it.
Only thing I would ask ZAGG to do is: PROVIDE A BOTTLE WATER size of solution!!!! & correct sizing of the pieces.
- Just 1 or 2 mini bubbles seen just by me, otherwise, it's a charm!
Still, I got my hands on a iPhone 4 32GB as well, kit for that is coming soon. Should be easier ...
I wish they had Otter Box style casing for X10.
tell us about fingerprint and screen clarity ...
naveen_reloaded said:
tell us about fingerprint and screen clarity ...
Click to expand...
Click to collapse
Clarity is ok.
Fingerprints ... way better than the original but still not good enough ...
Just don't drop sun protection lotion on your phone
You will need another invisible shield ...
Fingerprint is not there, or atleast, very much of it is reduced. I am a clean freak, so, I clean it everyday before putting it to charge for the night.
Senstivity was something to get used to, little bit off in the beginning, but after the curing process of the invisibleshield, it works like a charm.
Anyways, I contacted ZAGG, they are sending me another full kit for the X10, since I complained about the sizing & not enough solutions ...
I have to wait for approx 1.5 weeks to receive, remove the old/existing one, and do it correct the 2nd time around.
Of course, i need to send back the one I have right now when I receive the other one...
I'll post a message on how my 2nd attempt went, (with extra bottle of solution, yeah! that's right! I demanded to the agent on the email for 2nd bottle of solution)...either way, baby shampoo & distilled water is good enough too.
Screen Clarity - 100% or 99.99% , unless you angle the phone differently in the light or reflection , you dont see it.
I had the full body but took it off.
I bought the white X10 in dubai, like everyone else said fitted poorly and bleeds the colours from your case, I had to take it off as everyone was saying how battered the phone looked after a month.
It is pretty bullet-proof though, sure it must look better on the black phone!
Can't find any ones that I like so far. I know the edge makes things difficult but all the glass one I've seen don't have adhesive all over just along the edge and the film one i bought doesn't stay down on the edge so has anyone found a good one or decent one?
Please specify it's full coverage...glass or film...works with case and of so what case
flimflam06 said:
Can't find any ones that I like so far. I know the edge makes things difficult but all the glass one I've seen don't have adhesive all over just along the edge and the film one i bought doesn't stay down on the edge so has anyone found a good one or decent one?
Please specify it's full coverage...glass or film...works with case and of so what case
Click to expand...
Click to collapse
I try using the screen protector that came with the ghostek case I bought install it cover the entire front area of phone plus edges let set for about an hour try to put case on but everytime I did it would lift off the sides of the screen protector so I just took off the screen protector till I find that works. Also try the supershieldz ones same thing.
This is the one I am going to get https://www.amazon.com/dp/B01G7LQZW...TF8&colid=38DVAL1VV0RQM&coliid=I2N75A0MPNERT6
Omega Ra said:
This is the one I am going to get https://www.amazon.com/dp/B01G7LQZW...TF8&colid=38DVAL1VV0RQM&coliid=I2N75A0MPNERT6
Click to expand...
Click to collapse
I was thinking about that one but im not sure about the wet install. I'm good at putting screen protectors on but I've never did a wet install before...i May have to check it out
If you have some time and patience go for the Invisible Shield hd dry full body coverage. I originally ordered a Naked skin from slickwraps but its been processing since the 18th. So when my N7 arrived today I went on the search around town and ended up in a Verizon store. They kindly put it on for me, took two tries lol. Mid-install the Verizon guy just rips it and balls it up and went to grab another. When I got home I went through the packaging and noticed he skimmed me on the install. and didn't install the back.. I tell you what that was the worst torture in my life but hey pics below! Came out beautiful. +extra dbrand lens laying around conveniently . :good: winning
I put on a IQ shield matte. I like the matte finish but it is not for everyone. There is some lost clarity but much less glare and no fingerprints. I like the wet install for no bubbles and being easy. It takes some time to let the edges dry so they will stick. Let it sit at least overnight before using or putting on a case.
My case (Spigen Ultra Hybrid)did cause the corners to lift, a common problem with cases. IQ Shield has since come out with a "case friendly" updated version that is getting good reviews. I've got one on its way.
Phredeee said:
I put on a IQ shield matte. I like the matte finish but it is not for everyone. There is some lost clarity but much less glare and no fingerprints. I like the wet install for no bubbles and being easy. It takes some time to let the edges dry so they will stick. Let it sit at least overnight before using or putting on a case.
My case (Spigen Ultra Hybrid)did cause the corners to lift, a common problem with cases. IQ Shield has since come out with a "case friendly" updated version that is getting good reviews. I've got one on its way.
Click to expand...
Click to collapse
I ended up buying the skinomi matte screen protector which stuck on the edges perfect. Went without a case for a week and then put the spigen neo hybrid on which is my favorite case of all time and it peeled the corners still. I warmed the screen protector and was able to reform the corners a bit and it helped but i still want a problem free combination
This is the case and glass screen protector that I use. The setup is perfect for me. You could use any screen protector with this case. It also holds the glass ones down and keep them in place.
https://www.amazon.com/dp/B01INYYYDI/ref=cm_sw_r_other_apa_CE9Zxb7RJCJPC
https://www.amazon.com/dp/B01JTYPSLI/ref=cm_sw_r_other_apa_hB9ZxbR2MKR17
duracool said:
This is the case and glass screen protector that I use. The setup is perfect for me. You could use any screen protector with this case. It also holds the glass ones down and keep them in place.
https://www.amazon.com/dp/B01INYYYDI/ref=cm_sw_r_other_apa_CE9Zxb7RJCJPC
https://www.amazon.com/dp/B01JTYPSLI/ref=cm_sw_r_other_apa_hB9ZxbR2MKR17
Click to expand...
Click to collapse
Without clicking the link I'm gonna guess that's the unicorn beetle case. I have that myself and love it. I use the holster while at work
Great case. It works well with a glass screen protector.
I have an armorsuit on this phone, as well as several tablets and phones prior. Was originally skeptical of the curved edge, but it is working great so far. In the past 6 years armorsuits and common sense have kept me from having any cracked screens. And when I upgrade and sell the old phones, removing the armorsuit has always left a perfect as-new screen (but the housings usually have suffered damage from drops, etc.).
Skinomi
duracool said:
This is the case and glass screen protector that I use. The setup is perfect for me. You could use any screen protector with this case. It also holds the glass ones down and keep them in place.
https://www.amazon.com/dp/B01INYYYDI/ref=cm_sw_r_other_apa_CE9Zxb7RJCJPC
https://www.amazon.com/dp/B01JTYPSLI/ref=cm_sw_r_other_apa_hB9ZxbR2MKR17
Click to expand...
Click to collapse
Is your tempered glass screen protector any good? How is the clarity? Sensitivity?
The clarity and sensitivity is great. I have one on my phone and my fiances phone. This is the third one we bought and its pretty close to the flat ones. Just line it up because the cut outs are exact. No room for error.
Only had my YD206 for 2 days, and the rear screen got some bad looking scratches. Was in my pocket with only a very small (thumb size) aerosol dispenser which apart from a smooth rounded edge body has a plastic cap with so-so sharp top edges. Anyway, it left a couple of deep looking scratches that won't rub away.
I wish I had taken some pics before I started, so your just have to believe me:
I very carefully (and with my heart in my mouth) applied a tiny amount of toothpaste with my finger to the deepest scratch near the top of the screen. I used circular motions with my finger for about 15 seconds and then another 15 seconds with a kitchen towel. I then cleaned it off with a little water and a clean kitchen towel. Once dry I could barely see the original marks so I repeated it on a longer scratch/scuff on the middle of the screen. The marks which were very obvious to any casual user are now almost invisible.
However, I've observed that if a put a water drop on an area of the screen that I didn't use the toothpaste on, the droplet beads and will roll off if you tilt the device. If I put a droplet on a treated area it disperses and leaves a dark wet patch. This will disappear if the you dry it completely.
This leaves me to belief that the so called Gorilla Glass 3 (advertised as on the rear screen too) is not so, but is a cheap liquid glass coating which I have just rubbed off.
I have since ordered some liquid glass protector from Amazon (Crystalusion Liquid Glass - product no: B0094EETOG), maybe that will stay on and offer some protection. I don't really want to put a film protector on the back, it would spoil the look and feel. I will post the results.
I was just wondering whether I should rub the whole of the rear display with toothpaste to prime it for the liquid glass. Any thoughts?
Interesting observation. Have any one applied a tempered glass to the back e-ink screen?
I agree, on the Chinese phones, both screens are made from cheap glass, easily scratches and cracks. Curved gorilla glass must cost a lot!
It makes me wonder about the battery and other internal electronics too.
Great idea about the toothpaste.
I ordered a film for the EPD display.
Parmo100 said:
I agree, on the Chinese phones, both screens are made from cheap glass, easily scratches and cracks. Curved gorilla glass must cost a lot!
It makes me wonder about the battery and other internal electronics too.
Great idea about the toothpaste.
I ordered a film for the EPD display.
Click to expand...
Click to collapse
Why are you saying so? YD206 should just differ in LTE bands, the phone is the same.
By the way which film for EPD display you ordered? I want to try the one described here: http://forum.xda-developers.com/yotaphone-one/accessories/screen-protector-t3097978/page1
But I can't find it anymore.
I am saying phones from Chinese retailers all seem to have components that differ in quality from the old yotaphones assembled in Singapore. I have only a yd206 but I imagine Yd201 is the same. Real Gorilla glass does not scratch and break so easily.
I very carefully (and with my heart in my mouth) applied a tiny amount of toothpaste with my finger to the deepest scratch near the top of the screen. I used circular motions with my finger for about 15 seconds and then another 15 seconds with a kitchen towel. I then cleaned it off with a little water and a clean kitchen towel. Once dry I could barely see the original marks so I repeated it on a longer scratch/scuff on the middle of the screen. The marks which were very obvious to any casual user are now almost invisible.
Click to expand...
Click to collapse
You can do the same with scrached watchs, but for better result some great product exists , like polywatch (and it's cheat, about 5$ for a tube)
satsuki_yatoshi said:
You can do the same with scrached watchs, but for better result some great product exists , like polywatch (and it's cheat, about 5$ for a tube)
Click to expand...
Click to collapse
Thanks for heads up on polywatch, that looks very interesting so I might get some. After using the toothpaste the other day, I bought another brand (Arm & Hammer) and was conscious that it was more gritty than the stuff I used on the phone (Colgate). I wouldn't have liked to use that on the rear screen.
To add to the Gorilla glass comments, if you go to the corning_dot_com web site they list the manufacturers that are licensed/authorized to use it. Yotaphone are not listed unless or course the phones are built by one of the listed suppliers. Of course that would suggest that the Russian built phones don't use Gorilla glass either - Any comments from Yotaphone on this (if your listening of course)?
I managed to drop my YD206 in my garage. Tried to catch it mid-air but failed miserably so things got worse by spinning like crazy before hitting on the rough concrete. the phone flipped a few times on the concrete for 40-50cm before coming to rest on the front screen.
Bad news are: Back glass is shattered at the lower right "corner" where the first impact seemed to be.
Good news are: Front screen and frame don't have a single, not even tiny scratch! Even though it flipped like crazy and i saw dusty and dirty hit spots where the front screen hit the edgy concrete. EPD still works 100% and glass fragments seem to hold in place (except for a small edge missing in the corner.) I'm impressed and I bet my front screen would be gone if it wasn't some higher quality glass.
I agree, it's only the curved glass that is a cheap fake version. Front glass scratches easily but seems tough.
Finally got the Crystalusion and applied it. I didn't bother to prime the rest of the phone like I said I might and I didn't need too.
Now the phone surface beads water drops and the areas I rubbed down don't absorb water like they did before.
Whether or not the surface will be protected by the coating I don't know. It doesn't feel any different, so only time will tell if it resists scratching and abrasion.
If I remember I will revisit this thread say 4 or 6 months in the future and report back.
I applied a film to the EPD back of mine, I used the supplied wet and dry wipes but there were still a few bubbles. It was extremely difficult to get rid of the bubbles, some remained.
The EPD touch screen works fine still, the phone looks almost as good as before. The film did not stick as well on curved sides as on front, but ok.
But, as someone has already written, the clarity of the screen has improved greatly, there is no more "matte" appearance (due to removal of the cheap coating). It looks like a transparent plain glass screen now. In short the EPD looks much clearer. I love EPD screen now and I am using it much more, well, ALWAYS, in fact. 11 hours battery.
The Yotaphone 2 phones bought from China EPD have NO gorilla glass is my conclusion, I agree with apludgate, just this cheap coating. The huge drop in price of the yotaphone in 2015/16 begins to become clearer, but I am very pleased to have had the chance to buy a Yotaphone. It would be interesting to know the REAL technical differences of the Chinese and Russian phone specs.
Now just awaiting next drop of phone of course
Parmo100 said:
I applied a film to the EPD back of mine, I used the supplied wet and dry wipes but there were still a few bubbles. It was extremely difficult to get rid of the bubbles, some remained.
The EPD touch screen works fine still, the phone looks almost as good as before. The film did not stick as well on curved sides as on front, but ok.
But, as someone has already written, the clarity of the screen has improved greatly, there is no more "matte" appearance (due to removal of the cheap coating). It looks like a transparent plain glass screen now. In short the EPD looks much clearer. I love EPD screen now and I am using it much more, well, ALWAYS, in fact. 11 hours battery.
The Yotaphone 2 phones bought from China EPD have NO gorilla glass is my conclusion, I agree with apludgate, just this cheap coating. The huge drop in price of the yotaphone in 2015/16 begins to become clearer, but I am very pleased to have had the chance to buy a Yotaphone. It would be interesting to know the REAL technical differences of the Chinese and Russian phone specs.
Now just awaiting next drop of phone of course
Click to expand...
Click to collapse
Where have you found back screen film? And how manage to use it even if the film doesn't stick on curved sides? It sould peel off eventually...
I also would like to see if the clarity improves, and what are the cons of not having the standard coating anymore.
I found glass and film on aliexpress (of course), only 3-4 usd for a set of 2 pieces.
It sticks, but not so well on curved sides as you can see from the photo. Yes it will peel off eventually.
But the vast improvement in clarity was surprising.
The fake "gorilla" glass, no doubt, offers very little protection, it was just added to make it look like a genuine yotaphone.
I would advise all owners of yotaphones bought in China to buy silicon Bumper and screen protection.
Parmo100 said:
I found glass and film on aliexpress (of course), only 3-4 usd for a set of 2 pieces.
It sticks, but not so well on curved sides as you can see from the photo. Yes it will peel off eventually.
But the vast improvement in clarity was surprising.
The fake "gorilla" glass, no doubt, offers very little protection, it was just added to make it look like a genuine yotaphone.
I would advise all owners of yotaphones bought in China to buy silicon Bumper and screen protection.
Click to expand...
Click to collapse
Yeah I have a bumper and a film for the front screen, but I think I'll not buy yours for the problem in photo. As previously said in this thread, I was searching something like the film described HERE but couldn't find any...
Sounds impressive. It looks very clear in the photo.
Does your screen appear matte, like mine did before?
Parmo100 said:
Sounds impressive. It looks very clear in the photo.
Does your screen appear matte, like mine did before?
Click to expand...
Click to collapse
I found it! http://www.ebay.co.uk/itm/Yota-YotaPhone-2-INVISIBLE-Screen-Protector-Shield-Full-Clear-Skin-Front-Back-/171744750586?clk_rvr_id=1141685710269&rmvSB=true
And yes, my back screen is matte and VERY slippery, I hope that with the film above it will be no more slippery. For now I'm using a bumper, otherwise the smartphone is almost unusable
Full body protection
This one one amazon, i purchased but it still on the way
smile.amazon.com/gp/product/B018835YB0/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1
Full body with supporting website iqshield.com/fbscins.html
I'll try and feed back.
Deleted
TheArt. said:
I found it! http://www.ebay.co.uk/itm/Yota-YotaPhone-2-INVISIBLE-Screen-Protector-Shield-Full-Clear-Skin-Front-Back-/171744750586?clk_rvr_id=1141685710269&rmvSB=true
And yes, my back screen is matte and VERY slippery, I hope that with the film above it will be no more slippery. For now I'm using a bumper, otherwise the smartphone is almost unusable
Click to expand...
Click to collapse
The same one as that one on Aliexpress is 2.20 USD = 1.50 British pounds including free delivery, 5 times cheaper, where the guy in Derby probably buys them from.
Parmo100 said:
The same one as that one on Aliexpress is 2.20 USD = 1.50 British pounds including free delivery, 5 times cheaper, where the guy in Derby probably buys them from.
Click to expand...
Click to collapse
I checked and couldn't tell if those are the same the guy of xda reviewed in the post I linked.
Hello,
Has anyone tried the Liquid Dispertion Tech Screen Protectors from Aliexpress?
I am wondering if they are worth it.
Link
Thank you
Jay
I ordered the FULL SIZE of that one about a week ago. https://www.aliexpress.com/item/2pcs-Full-Glue-UV-Liquid-Glass-for-Galaxy-Note-8-S9-Plus-S8-UV-Light-2pcs/32883790652.html?spm=a2g0s.9042311.0.0.1efd4c4dtTx93F
If you wanna wait until it arrives I can report once i get it and apply it hahah
Please write us a review after you recieve! I'm looking for a same solution but i didn't find any perfect for my S7 before...so i'm afraid i won't find perfect - what did not cover from the watchable screen...
babyboy3265 said:
I ordered the FULL SIZE of that one about a week ago. https://www.aliexpress.com/item/2pcs-Full-Glue-UV-Liquid-Glass-for-Galaxy-Note-8-S9-Plus-S8-UV-Light-2pcs/32883790652.html?spm=a2g0s.9042311.0.0.1efd4c4dtTx93F
If you wanna wait until it arrives I can report once i get it and apply it hahah
Click to expand...
Click to collapse
.:JiM:. said:
Please write us a review after you recieve! I'm looking for a same solution but i didn't find any perfect for my S7 before...so i'm afraid i won't find perfect - what did not cover from the watchable screen...
Click to expand...
Click to collapse
If you got the S7 Edge then this seller on ALi has the proper glass for your phone as well. In any case I have seen enough videos of how to apply this protector that I am now persuaded that this is indeed the ultimate screen protector for edge phones, the only thing that is to be found out, would be the quality of the glass it self.. AKA, oleopathic coating, strength and etc. These things are important as these days 90% of Chinese tempered glass has no oleopathic coating and is not even real tempered glass, it is just a cheap gimmic that breaks easy as F***. So hopefully since this whole UV glue is a next level kinda thing, the quality might still be on the high.
When mine arrives I will make a video of the installation and post it here for you guys with my comments.
i have S9 and S7.
ok, i will wait for it, thank you Mate!
babyboy3265 said:
If you got the S7 Edge then this seller on ALi has the proper glass for your phone as well. In any case I have seen enough videos of how to apply this protector that I am now persuaded that this is indeed the ultimate screen protector for edge phones, the only thing that is to be found out, would be the quality of the glass it self.. AKA, oleopathic coating, strength and etc. These things are important as these days 90% of Chinese tempered glass has no oleopathic coating and is not even real tempered glass, it is just a cheap gimmic that breaks easy as F***. So hopefully since this whole UV glue is a next level kinda thing, the quality might still be on the high.
When mine arrives I will make a video of the installation and post it here for you guys with my comments.
Click to expand...
Click to collapse
So the glass i ordered arrived yesterday. Photos below. On the 1st glance, the glass appears to be of rather good quality and it seems to have a real oleopathic coating against fingerprints, which is quite rare these days with Chinese tempered glass.
As promissed i will make a video of how i apply it and post it here.
babyboy3265 said:
So the glass i ordered arrived yesterday. Photos below. On the 1st glance, the glass appears to be of rather good quality and it seems to have a real oleopathic coating against fingerprints, which is quite rare these days with Chinese tempered glass.
As promissed i will make a video of how i apply it and post it here.
Click to expand...
Click to collapse
Very Nice! Thank you for the info.
Jay
I ordered this for my S9 plus. It worked very well. It doesn't come with an install kit to balance the dispersement of the liquid, so when I installed it I missed a small edge and I installed it a little to low on the phone so my case would move it. So I removed it.
However I would recommend this product as a good alternative to the more expensive model.
Ok so LONG post, but absolutely necessary to read if you consider using this type of screen protection. My glass arrived 2 days ago and I applied it today. It is crystal clear and the visibility is at its best, touch sensitivity has not been affected at all. It is pleasant to the touch and does not feel like crappy tempered glass. (pics attached)
I had promised that I will upload a video but I did not think it trough and on the 8th minute the memory on my backup camera finished, so without my realization it turned off.
Below however are a few notes that are important and I realized it while shaking above the phone and overcoming them
1. Make sure to put a dust sticker on the TOP speaker in case some glue decides to enter there..
2. Put dust stickers above the buttons, all of them, so in case some glue leaks out it will not go inside the buttons.
3. From the place i ordered on Aliexpress, the glue that arrived may have been about 10%- 15% more than necessary in the tube, so i got leaks on the sides of the phone once the glue spread all over, I cleaned it with a napkin, it is possible that it leaked as I may have mistakenly applied a slight pressure on the glass while I placed it. I recommend that once you release all the glue from the black non-transparent bottle, you can squeeze it and then suck up about 10 15% of the glue that is on top of your screen.
4. Make sure before you start the whole procedure, to turn your phone off.
5. Do it on a FLAT surface because the glue may start moving from the middle of the phone towards the sides.
6. If you order from the same seller I did, your lamp would likely have a pre-set timer, as mine apparently does. In this case, the lamp will turn off every 45 seconds approx, that signals that you should move it on the next area (Bottom, middle, top) of the screen.
7. I would recommend that once you place the glass on top of the glue and let it spread, DO NOT freak out if it leaks. Turn on the lamp, and move it on top of the screen from top to bottom for about 40 seconds so the glue hardens just a little. Then with a napkin gently absorb the leaked glue.
8. Make sure you see at least 5-6 videos of other guys doing it so you can be best prepared.
Overall, I think it is a good option for screen protection, much better than all the NON-FULL GLUE alternatives. Aka, protectors with glue only on the sides of the glass only and not in the middle. It is tricky to apply but once you are done you will be glad you went for it. I am not sure if it is any different than the more expensive versions others people are talking about, I suspect that it is plain re-branding. The more expensive ones just come with a different brand logo, better advertisement and more promises. But, same thing in reality. At least in my case, I paid about 15$ and got 2 glasses, 2 glues, and a good UV lamp.
Quick summary: Find a dust-free flat surface with good light, clean screen, apply stickers to speaker, and all holes and buttons, gently remove any additional dust particles from screen,apply glue to middle of screen, gently place glass on top and DO NOT apply pressure, if it is not too straight you can move it a bit, If any leaks, apply UV light for about 40 seconds up and down, gently clean leaks, apply UV light for 45 seconds for 3 more rounds. At the end you may even do one more 45 second round top to bottom as I did.
Enjoy.
EDIT: After applying it the whole thing, the glue may still remain slightly sticky on the corners, so that may allow extra dust to stick on it. However, If you can, leave the phone under the sun for 10 minutes, and the glue will dry to the full, then it would be easy do fully clean the corners with your nail or some non dusty cloth. Just do not put too much pressure with your nail as you may raise the glass and allow a bubble to form.
I have ordered the same today. lets see when I receive it.
@BABYBOY 3265
Is that compatible with mofi cases? I wanted to order it with one of their fabric type case.
fmaher said:
@BABYBOY 3265
Is that compatible with mofi cases? I wanted to order it with one of their fabric type case.
Click to expand...
Click to collapse
It should be... I don't see why not. The one i ordered covers most of the screen but leaves quite a bit out as you can see in the pics i posted... and that is considered not too case friendly. However to me it seems pretty compatible with all cases.
But, to be safe you can order the alternative case friendly version of the glass from the same seller. It is smaller and covers even less of the screen. I don't see the harm in getting one and trying it
Received mine today. Took 12 days to reach India. The screen guard is really good,fits perfectly. the glue is little excess so had to clean up a lot. note for next time. However I fixed the glass a little to the lower side so bundled case is almost touching the glass. Don't know in future if it will lift because of that. Overall a fantastic deal.
Hello
I received mine yesterday it took about 13 days to get to the EU, and applied it today.
The application when well on the first try,i did watch quite a few tutorials beforehand and that helped alot.
The screen protector is very clear , and you do not notice it at all, it also seems to have some real oleophobic coating.
Tactile responsiveness is on par with what you would get without a screen protector.
All in all a very good alternative to the more expensive competitor you also get two screen protectors and two tubes of glue for the same price.
If you are in the market for a screen protector dont hesitate.
Jay
Just ordered, thanks for the review & tips..
Another positive report here, although I wish I'd been a bit more careful as I have a couple of tiny bubbles near the edge. They only show up on a bright white screen so I may live with them rather than try again with the spare glass & glue.
jsanta11 said:
Just ordered, thanks for the review & tips..
Click to expand...
Click to collapse
You wont be disapointed.
watch some videos before applying it, that really helps.
Check out this one for example.
( not affiliated in any way but i found it really helpful.)
Good Luck
j1978 said:
You wont be disapointed.
watch some videos before applying it, that really helps.
Check out this one for example.
( not affiliated in any way but i found it really helpful.)
Good Luck
Click to expand...
Click to collapse
Thank you very much!!!
I have the whitestone and love it. Was wanting something for a backup though. Last time I waited a week to get my warrenty replacement.
Does the AliExpress come with a tray to line up the glass? Or does the glass work with the Whitestone tray? If not, how do you get your glass lined up?
todd3835 said:
I have the whitestone and love it. Was wanting something for a backup though. Last time I waited a week to get my warrenty replacement.
Does the AliExpress come with a tray to line up the glass? Or does the glass work with the Whitestone tray? If not, how do you get your glass lined up?
Click to expand...
Click to collapse
The tray you are talking about probably will work. However the standard way to align the glass is by your finger and vision. Just make sure that if you do so, do not press downwards while you are moving and aligning the glass. If you press down, it will push some of the glue out...