Help needed - Galaxy Note 3 Q&A, Help & Troubleshooting

Hi guys!
I have just recently installed bobcat rom on my note 3 device and since than i cant connect my note 3 with my PC or any other..
So problem is with MTP driver.. I have tryed almost everything what i found on google or forums but nothing helps..
Do you maybe have some ideas? I ve tryed factory reset on note, reinstalling windows dowloaded many drivers but nothing helps..
Thx

WiseDog85 said:
Hi guys!
I have just recently installed bobcat rom on my note 3 device and since than i cant connect my note 3 with my PC or any other..
So problem is with MTP driver.. I have tryed almost everything what i found on google or forums but nothing helps..
Do you maybe have some ideas? I ve tryed factory reset on note, reinstalling windows dowloaded many drivers but nothing helps..
Thx
Click to expand...
Click to collapse
1- Make sure the correct driver has been installed on your PC. You can install Kies 3 for sure.
2- Make sure the correct USB mode is selected in your device: enter *#0808# and check if MTP+ADB is selected.

Doesnt work.. I have changed it to MTP + ADB but the message on my screen is the same..
When i connect note 3 with my laptop the drivers begin to install but after a minute i got error screen on note and failed install message on laptop.. Drivers are all up date and kies is installed.

WiseDog85 said:
Doesnt work.. I have changed it to MTP + ADB but the message on my screen is the same..
When i connect note 3 with my laptop the drivers begin to install but after a minute i got error screen on note and failed install message on laptop.. Drivers are all up date and kies is installed.
Click to expand...
Click to collapse
In this case try another rom or stock firmware.

Ok i will try, but is there anybody else with this bobcat rom problem?
Thx for help!

WiseDog85 said:
Ok i will try, but is there anybody else with this bobcat rom problem?
Thx for help!
Click to expand...
Click to collapse
You'd better post a question in the rom's supporting thread.

Related

"USB not recognised", Odin download mode problem

Hey. Im brand new to this forum and to Android aswell since i came from Iphone. Yea im a noob and sorry if you notice bad english
So i received my SGS2 some days ago and after researching about root/custom roms and stuff, I decided to start with rootin my SGS2. i download Odin3 1.85 and superoneclick, i also liked litening rom v1.1 and downloaded that too.
So i turn on "USB debugging" and turn off the phone to enter "download mode" and when i try to connect to Odin, nothing shows up. And Windows bar tells me that usb is not recognised. But... flash drive/transferring files and connecting to Kies works just fine. Please help me, ive been sitting over 24 hours with this issue and ive restarted/uninstalled installed pretty much everything over and over again (kies/drivers/device) not windows though. Why wont Windows/odin recognise it in download mode???
And if possible, is there a way around to install litening rom??
Thats weird man....very very unlikely to happen...
Just tell us step by step with screen shots if possible then it becomes very easy for us to find where u r doing it wrong...ok ?
Turn off USB debugging .
reboot phone and PC .
jje
While being in download mode on the phone, the pc/odin is not recognising anything
but everything works fine and recognises when i transfer files or use Kies
/tried uploading screenshots but the forum wudnt allow it since im a noob lol)
[email protected]
Thanks for reply but ive done that several times now
Adnanish said:
While being in download mode on the phone, the pc/odin is not recognising anything
but everything works fine and recognises when i transfer files or use Kies
/tried uploading screenshots but the forum wudnt allow it since im a noob lol)
[email protected]
Thanks for reply but ive done that several times now
Click to expand...
Click to collapse
This is driver issue.Try to find on kies an option to install the drivers again(i am not in front of my pc).Of course phone on and untick usb debugging
Sent from my GT-I9100 using Tapatalk
This is a driver problem. The Gadget Driver fails to get installed properly.
Make sure Windows Update are set to automatically find drivers for your devices.
I myself faced this problem. To rectify it I'd to try the same thing on a different machine and it worked flawlessly there.
The problem you're facing is that the Service Mode drivers are not getting installed, hence Odin is unable to recognize it.
Other possible fixes include, trying on different USB Ports, downloading Samsung PC Studio.
Thx for the replies everyone. Yea i figured its a driver issue, ill try the suggested actions incl samsung pc studio installing, and if its still not working i guess my last resort is using another pc or reinstalling windows on my own pc
In kies, i think in the tools menu, there is a install drivers option. This will fix the problem im sure. Not sure about pc studio having the same.
Sent from my GT-I9100 using XDA Premium App
fyi, i reinstalled windows and updated everything and the driver connection issue is solved now. I should have done this from the beginning instead of freaking out for several midnight hours lol thx for the help everyone, hopefully the rooting and flashing process should happen painless now
if anyone has this problem too,
i had the same problem and for me closing kies helped.
mfg Solidus

[Q] USB device not recognized

I have my galaxy y flashed with JellyBlast4.1 and also merruk kernel 2.5 then reinstalled stock roms because there are so many processes that appears to force stop..
after so many times I reflashed stock rom, jellyblast and merruk the phone cannot go to CWM properly...them CWM menu sometimes appear then mostly its just merruk image with the ClockworkMod Recovery v5.0.2.6 text....
I can still connect to ODIN mode but several PC cant recognize my device...it says USB device not recognized. I installed Kies old version and new version...I also tried using only samsung usb drivers not the kies packages..but still PC saya usb device not recognized...
what can I still do... I'm not able to use my phone for 3 days already...
I tried to connect and disconnect my galaxy y and connect again but I get the same response from the PC....
I also tried to do the reflashing stock rom process via ODIN on other PC's on several computer shops here in my area in Philippines but still cannot reflash stock rom via ODIN because my device cant be recognized...
I have gone to conclusion that some or a specific component of my phone is damaged already...
should I go to service center already???please I still wanna fix this problem on my own with your supports....I dont wanna spend money on service center yet... also I dont have money...im still a student....huhuhuh
Try to flash stock rom via odin on windows vista os pc or windows7 home basic os
I also faced dis prob on my windows7 ultimate os but on windows vista everytime my galaxy y get recognized
Sent from my GT-S5360 using xda premium
Check your cable (You must use factory one)
USB port : use the main
can you post SS
Try flashing a different merruk kernel and see whether the pc detects your device.
Don't do it many times as there can be chances of hard brick.
usb notb detected
miloboy05 said:
I have my galaxy y flashed with JellyBlast4.1 and also merruk kernel 2.5 then reinstalled stock roms because there are so many processes that appears to force stop..
after so many times I reflashed stock rom, jellyblast and merruk the phone cannot go to CWM properly...them CWM menu sometimes appear then mostly its just merruk image with the ClockworkMod Recovery v5.0.2.6 text....
I can still connect to ODIN mode but several PC cant recognize my device...it says USB device not recognized. I installed Kies old version and new version...I also tried using only samsung usb drivers not the kies packages..but still PC saya usb device not recognized...
what can I still do... I'm not able to use my phone for 3 days already...
I tried to connect and disconnect my galaxy y and connect again but I get the same response from the PC....
I also tried to do the reflashing stock rom process via ODIN on other PC's on several computer shops here in my area in Philippines but still cannot reflash stock rom via ODIN because my device cant be recognized...
I have gone to conclusion that some or a specific component of my phone is damaged already...
should I go to service center already???please I still wanna fix this problem on my own with your supports....I dont wanna spend money on service center yet... also I dont have money...im still a student....huhuhuh
Click to expand...
Click to collapse
Dude install samsung kies don't update try to wait give it like 5 minutes it works for me using windows 7 ultimate
its now getting detected but git stucked on setup connection on odin 1.85,,,id:com on odin has already turned yellow below with 0:[COM5]
thanks for all you that respond to mt post :good:
thankx
Mohamed.Anwar said:
Check your cable (You must use factory one)
USB port : use the main
can you post SS
Click to expand...
Click to collapse
That is very helpful n you save my phone, thankx bro
my phone samsung galaxy y GT 5360 was working just fine...then today i got an update then i downloaded it..n started installing update but it stucked at 88% for long time so i switched it off during installing..n then it is stuck on the start up logo n nothing happens futhur..n whn i connect to it to computer for odin it says unknow device unable to install drivers...pls help i followed all threads !! bt could not found any useful info ~
flash stock rom using odin
Reynaldi said:
flash stock rom using odin
Click to expand...
Click to collapse
I am facing a similar issue. Is there a solution yet ?
My Galaxy Y shows up the Welcome LOGO and goes OFF in say about 10 seconds.
I tried going into recovery mode/ download mode , but the operation lasts for only 10 seconds approximately.
Trying to connect the Phone to my PC fails with some "Unable to connect via USB" kind of a warning.
Any help is highly appreciated.
Hello!
kshashank said:
my phone samsung galaxy y GT 5360 was working just fine...then today i got an update then i downloaded it..n started installing update but it stucked at 88% for long time so i switched it off during installing..n then it is stuck on the start up logo n nothing happens futhur..n whn i connect to it to computer for odin it says unknow device unable to install drivers...pls help i followed all threads !! bt could not found any useful info ~
Click to expand...
Click to collapse
Use linux OS( in computer ) because no drivers are needed there.... :good:
BUT....
I dont know whether ODIN is available for LINUX OS...
Anyway try searching... :good:
walley0 said:
I am facing a similar issue. Is there a solution yet ?
My Galaxy Y shows up the Welcome LOGO and goes OFF in say about 10 seconds.
I tried going into recovery mode/ download mode , but the operation lasts for only 10 seconds approximately.
Trying to connect the Phone to my PC fails with some "Unable to connect via USB" kind of a warning.
Any help is highly appreciated.
Click to expand...
Click to collapse
try connecting without battery
and go into download mode
lvabarajithan said:
Use linux OS( in computer ) because no drivers are needed there.... :good:
Click to expand...
Click to collapse
Will give this a TRY. Nice clicked though
---------- Post added at 11:52 AM ---------- Previous post was at 11:36 AM ----------
sangalaxy said:
try connecting without battery
and go into download mode
Click to expand...
Click to collapse
Are you serious ? Connect it without the battery ?
Weird aah
walley0 said:
Are you serious ? Connect it without the battery ?
Weird aah
Click to expand...
Click to collapse
A usb cable carries power so you can enter download mode without the battery
marcussmith2626 said:
A usb cable carries power so you can enter download mode without the battery
Click to expand...
Click to collapse
"USB Device not recognised"
No luck.
walley0 said:
"USB Device not recognised"
No luck.
Click to expand...
Click to collapse
Make sure keis is not installed (conflicts with odin) and install Samsung drivers
Or try a different pc or Google what to do when phone not recognised - the answers are there
install samsung drivers
noo need of kies
switch off the phone
and then connect ur data cable to ur pc qnd then pressing the
volume down+home key+powerkey u will
enter into download mode ..
then ur phone will be detected by the pc..
Sent from my GT-S5360 using xda app-developers app
Use Odin/download samsung mobile usb driver.exe and restart your comp.
-Your Region Pack Select.
-Flash
Are you serious ? Connect it without the battery ?
Weird aah
Click to expand...
Click to collapse
Surely it will work... :fingers-crossed: :fingers-crossed: :fingers-crossed:

[Q] GS4 i9505 usb-pc issue after upgrade to JB 4.3

Hello everyone,
I registered and post this thread because i give up with problem i get after upgrade my galaxy s4 i9505 to jelly bean 4.3. Pc dont recognizing phone, usb cable is good because when i connecting the charging icon appears. I checked in other pc (in both there is windows 7), I download the last version of usb drivers from official site, i download the last version of Kies3 and it still no connecting. Before upgrade i havent this issue, i also checked other usb cable (both cables are original). I searching for hour any solution, activate developer options and check "usb debugging", also i wrote *#0808# and check mtp (i also tried other options, no result) or I tried launch vol down + power + home, also dont help. So i give up and now i`m hope some hi-tech wizard will tell where i making mistake...
After hours spending on wasting time with this usb connect i started to think about change soft, but here appears another issue... I havent root, and superuser. That is not a finish of trouble! I noticed that i have recovery 3e with some kind of error "e: signature verification failure" when i trying to flash any other soft or custom recovery! I searching for some tips on web, but in all options i allways impended whatever i try: when i try use Rom Manager there is error i havent su, when i try activate SuperSu there is error i havent root, when i try install CWM by MobileOdin there is error i am not su... when i try other aps like Framaroot there is error #5, also in Rom Manager i have info that my Rom doesnt support OTA, when i try change recovery file in System/bin folder by RootExplorer there is again error "u havent root"! I'll go crazy by this trap!
Anyone have any ideas? Please help me :crying:
PS. English is not my strong side. Sorry.
So... can sombody help me or this issue is too much advanced for this forum?
Again please help me.
Dude-K said:
Again please help me.
Click to expand...
Click to collapse
Can you please try to install this driver to your Pc http://uploaded.net/file/xdloq4jw , connect the cables on both side's Pc/Phone , on the screen to your phone there should be a notification(Connected as a media Device,Swipe it down and click that option, There should be MTP and Camera) Try to tick the camera first and let the driver install it and then tick MTP and let it install the driver for that as well , and Make sure to activate USB debugging. let me know. Have anice day.
I lost hope someone will respond ^^ thanks Repulsa for sugestion! But this issue is harder then i thought, I have this drivers already i download drivers from your link in spite of all. After download I re-install it, "installation succesfull finished", after that I connect the galaxy s4 with pc by original cable (the charging icon appears but nothing more ). On screenn nothing happens, nothing appears, there is no this notification that u write (only charging in right, top corner).
I checked three times usb debugging, its active. Help me please
Dude-K said:
I lost hope someone will respond ^^ thanks Repulsa for sugestion! But this issue is harder then i thought, I have this drivers already i download drivers from your link in spite of all. After download I re-install it, "installation succesfull finished", after that I connect the galaxy s4 with pc by original cable (the charging icon appears but nothing more ). On screenn nothing happens, nothing appears, there is no this notification that u write (only charging in right, top corner).
I checked three times usb debugging, its active. Help me please
Click to expand...
Click to collapse
Hi there mate , Try plugging it in to another usb port that comes off a motherboard. Don't use the front ports or usb hub. or either download kies 3 from here http://downloadcenter.samsung.com/content/SW/201312/20131204181418883/Kies3Setup.exeto see if its gonna work or not.have a nice day.
Dude-K said:
Hello everyone,
I registered and post this thread because i give up with problem i get after upgrade my galaxy s4 i9505 to jelly bean 4.3. Pc dont recognizing phone, usb cable is good because when i connecting the charging icon appears. I checked in other pc (in both there is windows 7), I download the last version of usb drivers from official site, i download the last version of Kies3 and it still no connecting. Before upgrade i havent this issue, i also checked other usb cable (both cables are original). I searching for hour any solution, activate developer options and check "usb debugging", also i wrote *#0808# and check mtp (i also tried other options, no result) or I tried launch vol down + power + home, also dont help. So i give up and now i`m hope some hi-tech wizard will tell where i making mistake...
After hours spending on wasting time with this usb connect i started to think about change soft, but here appears another issue... I havent root, and superuser. That is not a finish of trouble! I noticed that i have recovery 3e with some kind of error "e: signature verification failure" when i trying to flash any other soft or custom recovery! I searching for some tips on web, but in all options i allways impended whatever i try: when i try use Rom Manager there is error i havent su, when i try activate SuperSu there is error i havent root, when i try install CWM by MobileOdin there is error i am not su... when i try other aps like Framaroot there is error #5, also in Rom Manager i have info that my Rom doesnt support OTA, when i try change recovery file in System/bin folder by RootExplorer there is again error "u havent root"! I'll go crazy by this trap!
Anyone have any ideas? Please help me :crying:
PS. English is not my strong side. Sorry.
Click to expand...
Click to collapse
4.3 pc Drivers are different from 4.2.2. Install kies 3.
Enviado desde mi GT-P7510 usando Tapatalk 2
Dude-K said:
Anyone have any ideas? Please help me :crying:
PS. English is not my strong side. Sorry.
Click to expand...
Click to collapse
I see the problems are in Windows 7. The USB Conector seems ok. Untick "usb debugging" in ur phone and take a look this page. If dont appears nothing in the device manager, tell me it and i will give ya other solution
EDIT: Other option is:
- Uninstall completely Kies and Kies 3
- Reboot ur pc
- Download the latest version of Kies 3 (drivers are included, only tc what u select in the installation -> dont untick them)
- Conect ur phone to the pc with the USB conector and wait coz the drivers have to be installed. Till Windows dont finish of install them u dont need touch nothing. Good luck
I'm suprised that three peoples trying to help me, thats charming, thank you.
But...
Repulsa I've done what u wrote, I tried plugging s4 to another usb port, one port usb 2.0 and another usb 3.0, always was the same situation, the charging start coming but nothing more, there is no notification on phone screeon or on the pc. Also I tried do this in second pc, in 3 usb ports, but always was the same. After that I tried that what Repulsa and jaswinsky says, i re-install kies. First I uninstall in both pc kies, and i install the kies 3, I reboot my pc and I reboot my s4. Nothing new happens, only charging. Here i want to turn your attention that, I checked in both pc's my younger brothers Galaxy s2, and it havent any problems with connecting! If I plugging Galaxy s2 in this usb ports in both pc, windows 7 havent any problem to recognize phone! Kies and "My Computer" shows the device memory and its working. When I after that disconect s2 and plug in my s4 the same situation happens. Only charging icon, and nothing appears about connection.
After that i tried that what Joku1981 wrote, I untisck "usb debugging" in developer options and i checked the device manager, but there doesnt appears anything. There is not "other device" warning or anything like that. Charging icon appears but pc dont recognizing s4. I would also like to point out that, yesterday I've done with younger brother the format on one of this pc's with hope that will helps but, we format pc, reinstall windows7, reinstall all drivers, and the situation is still the same.
Please help me!
PS. I'm starting think about that the official OTA update do 4.4 will solve the issue..

[Q] usb device not recognized plz help !

Hi .
my pc can't recognized my grand 2 .... I try evry solution I found In the Internet .. nothing work for me .
I hope you guys help me
bilel7 said:
Hi .
my pc can't recognized my grand 2 .... I try evry solution I found In the Internet .. nothing work for me .
I hope you guys help me
Click to expand...
Click to collapse
try in different PC or laptop or usb cable.May be faulty in usb cable or in usb hub.
change your's charging jack
USB Connecion with PC does''t detect phone (Posting again for help)
I am trying to connect my Grand 2 [SM-G7102] with my pc, but unfortunately, its not detecting my phone. And I don't even have a clue whether it happened because of me or not..
I've already tried several steps to solve my prob but none of them worked.
Like-
1. Rebooting the phone, clearing cache n dalvik cache. (Didn't worked)
2. Uninstalled all its drivers from computer and reinstalling latest one's. (Tried old and new versions, none worked)
3. Installed Kies3 to check its discoverable or not. (Tries to discover but says not recognized)
4. Changing modes from mtp to ptp to adb. (Useless)
5. Cleaning off the pins and using its original data cable. (Switched several cables)
After these steps what I found out is that after fresh installed drivers it attempts to install its own driver which takes too long but after installing it does not get detected in my computer but rather it shows up in device manager with name "SAMSUNG_Android".
I know it cant be rom issue or anything like that, but also I believe its not pin broken issue as it is charging plus when i uninstalled all its drivers the device tries to reinstall its own driver taking 5 minutes but in end it shows "Installing SAMSUNG_Android" and closes.
So please help me out and suggest something .
Thanks in advance .
Post yours device manager screenshot
Try a factory reset
devjmi said:
Post yours device manager screenshot
Click to expand...
Click to collapse
this is the screenshot-
http://s30.postimg.org/mpimxc6r5/image.png
also the encircled one's are the changes in driver happens after connecting my mobile.
and I've already tried updating each one of them manually as well as automatically, so if you have any suggestions other than that, then I'll be thankful.
---------- Post added at 05:50 PM ---------- Previous post was at 05:49 PM ----------
kishan12345 said:
Try a factory reset
Click to expand...
Click to collapse
it will be waste of time and my data, it won't help i believe
Dial *#0808#
select dm+modem+adb
Press ok and reboot
Now try to detect urs phone via kies or odin
Post results
Anubhav001 said:
I am trying to connect my Grand 2 [SM-G7102] with my pc, but unfortunately, its not detecting my phone. And I don't even have a clue whether it happened because of me or not..
I've already tried several steps to solve my prob but none of them worked.
Like-
1. Rebooting the phone, clearing cache n dalvik cache. (Didn't worked)
2. Uninstalled all its drivers from computer and reinstalling latest one's. (Tried old and new versions, none worked)
3. Installed Kies3 to check its discoverable or not. (Tries to discover but says not recognized)
4. Changing modes from mtp to ptp to adb. (Useless)
5. Cleaning off the pins and using its original data cable. (Switched several cables)
After these steps what I found out is that after fresh installed drivers it attempts to install its own driver which takes too long but after installing it does not get detected in my computer but rather it shows up in device manager with name "SAMSUNG_Android".
I know it cant be rom issue or anything like that, but also I believe its not pin broken issue as it is charging plus when i uninstalled all its drivers the device tries to reinstall its own driver taking 5 minutes but in end it shows "Installing SAMSUNG_Android" and closes.
So please help me out and suggest something .
Thanks in advance .
Click to expand...
Click to collapse
Sometime it may happens if you change your kernel
" If you change your kernel try to flash back your stock kernel"
MDabrar said:
Sometime it may happens if you change your kernel
" If you change your kernel try to flash back your stock kernel"
Click to expand...
Click to collapse
i had never changed my kernel in my opinion, its nk1 stock since beginning and also after flashing rom.

Updating Yotaphone 2 YD201 ME Build

Dear all, I'm new here and just got my yotaphone 2 today, bought it locally from UAE, i beleive that the build ME refers to Middle East, got an android version of 4.4.3 YD201 model.
I thought that YD201 models are OTA updatable versions but seems not
Please can you guide me in a simple way how to update to lollipop? Noting that I've never flashed or done this before
Thank you so much..
https://forum.xda-developers.com/yo...grade-yotaphone-2yd206-running-4-4-4-t3506293
You can follow this guide fully but you don't need to flash HK first, so you just flash RU 5.0.0 firmware directly.
Caferatte89 said:
https://forum.xda-developers.com/yo...grade-yotaphone-2yd206-running-4-4-4-t3506293
You can follow this guide fully but you don't need to flash HK first, so you just flash RU 5.0.0 firmware directly.
Click to expand...
Click to collapse
Thank you so much.. Totally appreciate that.. But I don't know if it really matters as the tools relates to YD206 while I have YD201.. Should I proceed ?
By the tools do you mean YotaphoneFlasher? It works on both 201 and 206 since it's from official.
Thank you again.. OK I'm all set everything is ready but the only thing that's keeping me is drivers installation... Somehow the Google drive coming with the flasher is not being installed. I tried all ways possible, I.e. right click on the INF file and install but I get error message, and also tried to install it from device manager but couldn't. Can you please help with this? Thanks again
Btw I'm using Windows 7
Would you mind to post the srceenshot so I know your problem?
https://www.youtube.com/watch?v=R3wROHMJBDU This is the video of how you install driver
Caferatte89 said:
Would you mind to post the srceenshot so I know your problem?
https://www.youtube.com/watch?v=R3wROHMJBDU This is the video of how you install driver
Click to expand...
Click to collapse
my dear friend, i managed to update the driver, thanks to you, but it seems that when i power off the phone and enter the "downloading " mode on the phone screen then connect it to the computer it seems the phone is not being connected.. i used the flasher chosed option 1 "flash the cellphone" then i get the message "waiting for device" on the flasher..
i had a screenshot just to show that i have done everything i should (i guess) .. i.e. copied the firmware.. etc,,,
mindyou, i think the problem is that when i conncet the phone to usb it goes under other devices/Android which is not being recognized..
you are the best and thank you for your help again and again!
Weird. Do you've already install both drivers and restart your computer?
If yes, how about try to plug another usb port?
I got both ADB and Qualm drivers installed.. but nothing happening! I tried the 3 usb ports already..
I don't know how to solve this.. I think I need to try it on another computer .. maybe it'll work out!
Your driver not properly install. Try reboot pc, enable usb debugging at phone, plug in usb. See if there is any changes at device manager.
There is yellow triangle. So it mean.. Oh.. Oo..
If stilk not ok. Plug out usb from pc. At device manager, unsinstall both yellow triangle. Plug in back usb. So it will detect device and windows trying to install it.
If you have Windows 10 you have to disable signature driver verification, entering in the advanced boot menu of windows. After that the .inf driver will install.
I got the update at last and it's working beautifully smooth I downloaded universal driver from adbdriver.com and it worked perfectly. Thank you all guys for your help and efforts

Categories

Resources