Hi, I hope I'm not breaking any rules here.
I'll make it short.
I have a new i337 with 4.4.2 AT&T rom. It has a two major problems : First there is no mobile data icon in the notification panel (which I read was AT&T fault) and the second problem is the WIFI doesn't connect automatically or remember any network I was connected before. I need to put my WIFI password every time I want to connect.
I thought about installing an international i9505 STOCK ROM on it but I cant. I keep getting a failed message with odin.
The reason i'm thinking on putting an international i9505 STOCK ROM on it is mainly solving those two problems I mentioned before and because I don't live in the USA or in CAnda/America in general.
What can I do in order to install an international i9505 STOCK ROM on mi i337?
Thanks
this is what i get with odin:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUGNK4_I9505OXAGNK4_I9505XXUGNK4_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/008> Added!!
<ID:0/008> Odin v.3 engine (ID:8)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Removed!!
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
You can't install a 9505 stock rom on the i337
Sent from my Nexus 9 using XDA Free mobile app
thanks for the reply.
I guess I have to solve the problems with a rom.
Any idea about the WIFI problem?
yotamh said:
thanks for the reply.
I guess I have to solve the problems with a rom.
Any idea about the WIFI problem?
Click to expand...
Click to collapse
I would flash the nb1 tar file in Odin. See the general forum for the file
Sent from my Nexus 9 using XDA Free mobile app
thanks.
Does anybody knows any good custom rom to i337 which will be similar to stock rom and will have mobile data, torch widget (for some reason AT&T rom doesn't have it) and no wifi problems?
cheers
Related
Hi Guys,
I got a problem with my Samsung Galaxy S SCH-I909
First I have tried changing it's ROM to a different one. It failed. My SGS won't turn on at all anymore. No phone,!,computer sign at all, BUT CAN still go to the Download mode.
I've tried flashing it again with the ROM for SCH-i909 itself(SCH-i909_DI13). But still it keeps on failing.
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> Enter CS for MD5..
<ID:0/003> Leave CS..
<ID:0/003> Enter CS for MD5..
<ID:0/003> Leave CS..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> factoryfs.rfs
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I have tried doing it with repartition pit 512 and without repartition and to no luck. Does this mean that my phone is totally bricked? Hope somebody can help.
Thank yoU!
I want to flash my T-mo S4 9505 to the newest radio. I am on M919UVUAMDL baseband right now have TWRT 2.6 and Rooted. I downloaded the latest "I9505VJUBMG3_modems.tar" modem file and would like to know if I need to choose "PDA" or "Phone" in Odin 3.07 window when flashing. When i chose PDA option I received the error below. Do I need to choose "Phone" option instead? Some website warn that it will brick my phone if i choose the Phone option.
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NON-HLOS.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
Thanks
vega312 said:
I want to flash my T-mo S4 9505 to the newest radio. I am on M919UVUAMDL baseband right now have TWRT 2.6 and Rooted. I downloaded the latest "I9505VJUBMG3_modems.tar" modem file and would like to know if I need to choose "PDA" or "Phone" in Odin 3.07 window when flashing. When i chose PDA option I received the error below. Do I need to choose "Phone" option instead? Some website warn that it will brick my phone if i choose the Phone option.
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NON-HLOS.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
Thanks
Click to expand...
Click to collapse
When flashing modem you have to choose phone.
jluiz2 said:
When flashing modem you have to choose phone.
Click to expand...
Click to collapse
Tried flashing the modem file as a Phone, got the same message as above.
Try to download the file again. Maybe it can be corruped. If you unziped, don´t do it when you try again. Flash the file as you get with odin 3.04. Hope to help you.
<ID:0/011> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505VJUAMDE_MODEM.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/011> Odin v.3 engine (ID:11)..
<ID:0/011> File analysis..
<ID:0/011> SetupConnection..
<ID:0/011> Initialzation..
<ID:0/011> Get PIT for mapping..
<ID:0/011> Firmware update start..
<ID:0/011> modem.bin
<ID:0/011> NAND Write Start!!
<ID:0/011> Transmission Complete..
<ID:0/011> Now Writing.. Please wait about 2 minutes
<ID:0/011> Receive Response from boot-loader
<ID:0/011> RQT_CLOSE !!
<ID:0/011> RES OK !!
<ID:0/011> Completed..
<OSM> All threads completed. (succeed 1 / failed 0)
vega312 said:
I want to flash my T-mo S4 9505 to the newest radio. I am on M919UVUAMDL baseband right now have TWRT 2.6 and Rooted. I downloaded the latest "I9505VJUBMG3_modems.tar" modem file and would like to know if I need to choose "PDA" or "Phone" in Odin 3.07 window when flashing. When i chose PDA option I received the error below. Do I need to choose "Phone" option instead? Some website warn that it will brick my phone if i choose the Phone option.
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> NON-HLOS.bin
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
Thanks
Click to expand...
Click to collapse
Check if there is kies running in the background kies should be closed completly then try
I dont have kies installed and Odin worked to install ttwr.
I dont have kies installed and Odin worked to install ttwr.
i am not too sure myself.. but dont u need to be on stock recovery to flash a a new modem.
rebel1735 said:
i am not too sure myself.. but dont u need to be on stock recovery to flash a a new modem.
Click to expand...
Click to collapse
nope
I have the same problem , tried everything on internet and end up brick my phone. +1 to this problem.
Try a different firmware maybe?, may not be compatible had an issue like that on a S2 ended up changing it and it worked
Carl Blance said:
Try a different firmware maybe?, may not be compatible had an issue like that on a S2 ended up changing it and it worked
Click to expand...
Click to collapse
The issue is , since modem is included in all odin flashable firmwares etc, there is no way to do it. I tried mobile odin, same issue, stucked at "clearing" , tried flash pit file along with stock firmware, tried flash back to original firmware that come with phone, same issue odin stucked at modem.bin. Tried untick "auto-reset" in odin, manual restart, enter download mode , flash again, does not work. Tried switching usb port, switch cable, nothing works.
Error message below :
<ID:2/006> Firmware update start..
<ID:2/006> modem.bin
<ID:2/006> NAND Write Start!!
<ID:2/006> Transmission Complete..
<ID:2/006> Now Writing.. Please wait about 2 minutes
<ID:2/006>
<ID:2/006> Receive Response from boot-loader
<ID:2/006> Complete(Write) operation failed.
Click to expand...
Click to collapse
vega312 said:
Tried flashing the modem file as a Phone, got the same message as above.
Click to expand...
Click to collapse
THANK THANKS!! i did it as you write in my SPH/L720 sprint s4. THANKS AGAIN BRO!!
---------- Post added at 07:50 AM ---------- Previous post was at 07:46 AM ----------
Thanks thanks!!!!
I cannot get a network connection as my sim card is no longer found, even replaced reader but no better. Have tried flashing modem radio firmware but no better, what can I do to get the sim card working again.
The baseband is not available as it is linked to the sim card.
thanks
couldn't flash modem but got it all backworking with my recovery. I still can't GPS. that's my only issue. can't flash back to stock so I guess GPS just won't work for me. Any chance we can get a fix for this with a cm12 rom release to make things easier? This sucks, but I do appreciate all the work that goes into it. It's my fault I can't remember directions. lol
which option u tried pnone or pda
SAME HERE!!
<ID:0/012> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> SPH-L720_MDC_Modem.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/012> Odin v.3 engine (ID:12)..
<ID:0/012> File analysis..
<ID:0/012> SetupConnection..
<ID:0/012> Initialzation..
<ID:0/012> Get PIT for mapping..
<ID:0/012> Firmware update start..
<ID:0/012> modem.bin
<ID:0/012> NAND Write Start!!
<ID:0/012> Transmission Complete..
<ID:0/012> Now Writing.. Please wait about 2 minutes
<ID:0/012>
<ID:0/012> Receive Response from boot-loader
<ID:0/012> Complete(Write) operation failed.
<ID:0/012> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
pichoD said:
<ID:0/012> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> SPH-L720_MDC_Modem.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/012> Odin v.3 engine (ID:12)..
<ID:0/012> File analysis..
<ID:0/012> SetupConnection..
<ID:0/012> Initialzation..
<ID:0/012> Get PIT for mapping..
<ID:0/012> Firmware update start..
<ID:0/012> modem.bin
<ID:0/012> NAND Write Start!!
<ID:0/012> Transmission Complete..
<ID:0/012> Now Writing.. Please wait about 2 minutes
<ID:0/012>
<ID:0/012> Receive Response from boot-loader
<ID:0/012> Complete(Write) operation failed.
<ID:0/012> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
may be wrong modem for right frimware or vice versa
Hey guys...
I need a little help from professionnals...I wanted to try a Cyanogen rom, the 10.1.3, a stable one, on my S4. So I downloaded it, I rooted my phone with cf-autoroot with Odin, intalled CWM Recovery. Then I did all the wipes and flashed the cyanogenmod.
Guess what, it didn't work The flash worked well but next infinite bootloop on the boot animation of cyanogen...So I tryied to go back to recovery, mount USB and flash an another rom of cyanogen. And the results was worse, the flash did'nt work at all, if I remember "failed to mount /system" or something similar. And when I tried to restard the phone, nothing happened.
So I wanted to go back to the stock rom to repair this mess. => Download mode then under PDA, my tar.md5 files. Didn't work. I also tried with a PIT file, same result.
I changed my usb cable, the version of Odin, the usb port.
Here's what Odin give :
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl2.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
I don't know what to do, I tried a lot of things beside all of this. Any ideas ?
THX
Try install STOCK ROM with older ODIN (click here), no the newest version
What stock rom are you trying to flash?
Thanks, but no change...
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUBMGA_I9505OXXBMG3_I9505XXUBMGA_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl2.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> aboot.mbn
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Lennyz1988 said:
What stock rom are you trying to flash?
Click to expand...
Click to collapse
This is I9505XXUBMGA_I9505OXXBMG3_I9505XXUBMGA_HOME, official for Europe, 4.3
BeamGG said:
This is I9505XXUBMGA_I9505OXXBMG3_I9505XXUBMGA_HOME, official for Europe, 4.3
Click to expand...
Click to collapse
if you have the secured bootloader (knox warranty void 0x0 in download mode) that means you can not flash old firmware such as MGA. you can flash firmwares MH?, MI? or MJ?.
I9505XXUBMGA = 4.2.2.
Thats probably why the flashing fails.
Lennyz1988 said:
I9505XXUBMGA = 4.2.2.
Thats probably why the flashing fails.
Click to expand...
Click to collapse
I'm such an idiot...I hasd chosen the wrong file...I'm trying with the MJ5 now, I'll let you know
EDIT : Indeed it goes further, but not at the end :
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUEMJ5_I9505OXAEMJ5_I9505XXUEMJ5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl2.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> aboot.mbn
<ID:0/003> tz.mbn
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/003> Added!!
EDIT : I changed the usb port and re-installed the drivers, worked...finally, thx guys !
BeamGG said:
I'm such an idiot...I hasd chosen the wrong file...I'm trying with the MJ5 now, I'll let you know
EDIT : Indeed it goes further, but not at the end :
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9505XXUEMJ5_I9505OXAEMJ5_I9505XXUEMJ5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl2.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> aboot.mbn
<ID:0/003> tz.mbn
<ID:0/003> boot.img
<ID:0/003> recovery.img
<ID:0/003> system.img.ext4
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/003> Added!!
EDIT : I changed the usb port and re-installed the drivers, worked...finally, thx guys !
Click to expand...
Click to collapse
Only changing usb port and reinstalling solved it?
I have the same issue with ODIN3 3.07.
need4steer said:
Only changing usb port and reinstalling solved it?
I have the same issue with ODIN3 3.07.
Click to expand...
Click to collapse
Hey man,
Sorry for this late answer. Yes, as I said, I only changed the usb port et reinstalling drivers...did it work for you ?
BeamGG said:
Hey man,
Sorry for this late answer. Yes, as I said, I only changed the usb port et reinstalling drivers...did it work for you ?
Click to expand...
Click to collapse
Unfortunately no. Apparently the tar.md5 file I was trying to flash was the problem. The developer released a newer version of it which was flashed okay. Thanks a lot anyway!
need4steer said:
Unfortunately no. Apparently the tar.md5 file I was trying to flash was the problem. The developer released a newer version of it which was flashed okay. Thanks a lot anyway!
Click to expand...
Click to collapse
Cool, you are welcome ! :good:
Hi Guys,
Well first off i am sorry i am sure this is a very noob styled question but i am an idiot in need of some help
I have a Galaxy s4 GT-I9505 which i decided to root and have accidentally soft bricked
when i try to boot my phone up i get "firmware upgrade encountered an issue. please select recovery in kies and try again"
I have tried to recover my phone in Kies to no avail.
In download mode i get this error with oden
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-jflte-jfltexx-gti9505.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/005> Added!!
Previously i was getting an error
<ID:0/003> Get PIT for mapping..
<ID:0/003> Removed!!
<ID:0/003> There is no PIT partition.
I have made sure Kies isn't running in task manager tried multiple USB slots (i don't have a spare cable to test with)
I would really appreciate any help you can offer
Thanks in advance
-----------------------Solved -------------------------------
I tried a new cable and it fixed the issue
i
llDrewll said:
Hi Guys,
Well first off i am sorry i am sure this is a very noob styled question but i am an idiot in need of some help
I have a Galaxy s4 GT-I9505 which i decided to root and have accidentally soft bricked
when i try to boot my phone up i get "firmware upgrade encountered an issue. please select recovery in kies and try again"
I have tried to recover my phone in Kies to no avail.
In download mode i get this error with oden
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-jflte-jfltexx-gti9505.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/005> Added!!
Previously i was getting an error
<ID:0/003> Get PIT for mapping..
<ID:0/003> Removed!!
<ID:0/003> There is no PIT partition.
I have made sure Kies isn't running in task manager tried multiple USB slots (i don't have a spare cable to test with)
I would really appreciate any help you can offer
Thanks in advance
Click to expand...
Click to collapse
Check this, it seems same issue;
http://forum.xda-developers.com/galaxy-s3/help/nand-write-start-completewrite-t1846867
don't download anything from that thread just read what happened
as one of member mentioned there & Also in ur logs
thr s problem in NAND write operation
SO search "fix NAND Corrupted" or something like this.
i searched little bit but do it urself...
some opinions;
wipe ur phone through recovery (built-in recovery i mean)
and then try again....
:good:
llDrewll said:
Hi Guys,
Well first off i am sorry i am sure this is a very noob styled question but i am an idiot in need of some help
I have a Galaxy s4 GT-I9505 which i decided to root and have accidentally soft bricked
when i try to boot my phone up i get "firmware upgrade encountered an issue. please select recovery in kies and try again"
I have tried to recover my phone in Kies to no avail.
In download mode i get this error with oden
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-jflte-jfltexx-gti9505.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> recovery.img
<ID:0/005> NAND Write Start!!
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/005> Added!!
Previously i was getting an error
<ID:0/003> Get PIT for mapping..
<ID:0/003> Removed!!
<ID:0/003> There is no PIT partition.
I have made sure Kies isn't running in task manager tried multiple USB slots (i don't have a spare cable to test with)
I would really appreciate any help you can offer
Thanks in advance
Click to expand...
Click to collapse
First of all I hope for your good that you have usb debugging enabled. Try to right click odin executable and run as administrator. After that restart flashing. It should work. Good luck.
Hiya Guys
Thanks for the advice so far, i have tried running oden as admin since the issue started with oden 3.09 and 3.07
I downloaded a stock firmware over night and received this error
<ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> sbl1.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> sbl2.mbn
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/005> Removed!!
<ID:0/005> Added!!
<ID:0/005> Removed!!
i have tried holding the power home and up button to get my phone in to recovery but it just goes to the
"firmware upgrade encountered an issue. please select recovery in kies and try again"
screen
I am picking up a new cable today that i hope may fix the issue, i check the forum thread posted but it ended up in the user needing a new phone sadly
Any other thoughts?
Thanks for your time and help so far
Just try the basic stuff:
- Different usb port
- Different pc
- Different cable.
99% of the Odin problems is solved with it.
Thanks for the reply,
I have a different cable to test with when i get home tonight and i can try using my girlfriends laptop as well so thanks for the advice so far
I have a quick question, as i haven't had much trouble routing with the cf auto root i thought maybe i could just put a clean install of stock on my phone to get it working.
I left this firmware "I9505XXUFND7" downloading from sammobile.com before i left for work this morning, i am pretty sure it is correct for my GT-I9505 (no idea what the carrier was as it came unlocked and i am unsure of how to check).
Would anyone be kind enough to confirm this is the correct firmware or if it is wrong let me know which i should be using?
Thanks so much for your help so far people it really means a lot, sorry for the noob questions
Hi guys,
This is just a quick thank you for your help i tried a new cable and the firmware and it fixed the issue
hi, i was using my samsung galaxy note 4 for nearly 4 years without any problems. today It went to black screen where was some info about "panic Karnel". I removed battery and everything was fine. 2 hours later when I was using snapchat phone restart and went to bootloob. I connected note 4 to odin to flash stock room and I get a massage in odin every time when I want to flash rom:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1101)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005>
<ID:0/005> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
on my phone there is massage:
"mmc_write fail"
Please help dear experts, i it any chance to fix my phone??
P.s. I tryed to use this>>> https://forum.xda-developers.com/no...te-4-pit-files-repartiton-f-g-c-t-w8-t3282641
but did not work, still get a massage:
""mmc_write fail""
x7nofate said:
hi, i was using my samsung galaxy note 4 for nearly 4 years without any problems. today It went to black screen where was some info about "panic Karnel". I removed battery and everything was fine. 2 hours later when I was using snapchat phone restart and went to bootloob. I connected note 4 to odin to flash stock room and I get a massage in odin every time when I want to flash rom:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1101)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005>
<ID:0/005> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
on my phone there is massage:
"mmc_write fail"
Please help dear experts, i it any chance to fix my phone??
Click to expand...
Click to collapse
Flash Twrp recovery via odin
In twrp Go to wipe
Wipe "system+data+cache+dalvic cache+internal storage you have to wipe 3 times or more to make sure all partations are wiped cleaned.
Then you have to download repair firmware for your specific model.
Repair firmware comes with 5 files "BL+AP+CP+CSC+PIT"
you have to extract and upload all files in odin with PIT file.
Then go to odin options and check on "nand eraseall" and "re partition"
Now boot your device into odin download mode
Now hit start and wait until finish
Then dont let phone reboot you have to boot into stock recovery and do wipe cache & factory reset then reboot.
If this method fails then there is no way to fix it unless changing logic board because your internal storage is dying thats why it shows "mmc_write fail".
You can download repair firmware from www.tsar3000.com
thank you for reply. I tryed to Flash Twrp recovery via odin but it failed. I get massage in odin:
<OSM> All threads completed. (succeed 0 / failed 0)
<ID:0/004> Removed!!
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> recovery.img
<ID:0/004> RQT_CLOSE !!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I tryed few times and I am sure I was flashing the right recovery
I also did try to flah Repair firmware which comes with 5 files "BL+AP+CP+CSC+PIT" but it failed, I get message:
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Erase...
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
please help
x7nofate said:
thank you for reply. I tryed to Flash Twrp recovery via odin but it failed. I get massage in odin:
<OSM> All threads completed. (succeed 0 / failed 0)
<ID:0/004> Removed!!
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> recovery.img
<ID:0/004> RQT_CLOSE !!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I tryed few times and I am sure I was flashing the right recovery
I also did try to flah Repair firmware which comes with 5 files "BL+AP+CP+CSC+PIT" but it failed, I get message:
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Erase...
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
please help
Click to expand...
Click to collapse
Try to put your phone in freezer without battery for an hour then try this method again.
Keep trying if it doesn't work then as i told you you have to replace logic board because your internal memory is dead.