Can I use any android 5.0 rom as secondary rom by the dual boot switcher app?
I have phoenix v 10.2 as my primary rom , and wanna make any android 5.0 rom as secondary ................
is android 5 roms support the dual boot system or not? because I tried about 5 rom based on 4.4.4 kk as secondary and all worked well
Device : i9505 ............... ROM : phoenix v 10.2 Kernel : phoenix own Kernel
thank you
I would say no because Kitkat uses Dalvik and Lollipop uses ART
OmarManLover said:
Can I use any android 5.0 rom as secondary rom by the dual boot switcher app?
I have phoenix v 10.2 as my primary rom , and wanna make any android 5.0 rom as secondary ................
is android 5 roms support the dual boot system or not? because I tried about 5 rom based on 4.4.4 kk as secondary and all worked well
Device : i9505 ............... ROM : phoenix v 10.2 Kernel : phoenix own Kernel
thank you
Click to expand...
Click to collapse
yes you can go ahead with it
Pisanoid said:
I would say no because Kitkat uses Dalvik and Lollipop uses ART
Click to expand...
Click to collapse
Seriously?!!
Please advice if you know what you are talking about.
I'm having
TW in primary
GPE lollipop as dual
CM12 as multislot1
And the list goes on...
MohamedN said:
Seriously?!!
Please advice if you know what you are talking about.
I'm having
TW in primary
GPE lollipop as dual
CM12 as multislot1
And the list goes on...
Click to expand...
Click to collapse
Perhaps I should have mentioned that what I said was based on my personal experience. That said, I could run 4.3 TW and 4.4 Google Edition just fine if they were both on dalvik, but I couldn't run any of the two if I enabled ART in 4.4. When TW 4.4 came out it was the same thing: if the runtimes were not the same I would get FCs and RRs within 3 seconds of booting. That said, I don't know if MultiBoot development advanced to the point this is no longer a problem.
Pisanoid said:
Perhaps I should have mentioned that what I said was based on my personal experience. That said, I could run 4.3 TW and 4.4 Google Edition just fine if they were both on dalvik, but I couldn't run any of the two if I enabled ART in 4.4. When TW 4.4 came out it was the same thing: if the runtimes were not the same I would get FCs and RRs within 3 seconds of booting. That said, I don't know if MultiBoot development advanced to the point this is no longer a problem.
Click to expand...
Click to collapse
You are speaking of multiboot manager and he was asking about dual boot patcher
Both amazing but very different in the way they work..
Cheers man
thank you for all , I will check if it goes right
Related
This thread is solely meant for all KIT KAT 4.4 discussions, reviews, FAQ etc, feel free to post your findings , comments, advice about the 4.4 Kit Kat ROM's you had tested and if anything new that I should add to this post.
What you might want to know and should know about Kit Kat 4.4
4.4 Kit Kat: Everything You Need to Know & Here or Developers website
i9000 Current Development
4.4 Kit Kat ROM's developed by XDA members for i9000:-
Omni ROM 4.4 Kit Kat by @kasper_h
[4.4.2]Omni for the Galaxy S I9000 by @SferaDev
Mackay ROM 4.4 by @kasper_h
[KK 4.4.2][ROM]Mackay OMNI ROM @kasper_h
Unofficial CM 11 nightlies by @pawitp
Official CM 11
CyanAOSP KK4.4 v1.0.0 by @ts1506 (For gaming...stable)
C-RoM -4.4-2 by @aways
[4.4.2] SlimKat - I9000 [BETA] by @mnazim
KK 4.4 Dandrio by @Monkey_Grass
[4.4.2]Paranoid Android by @SferaDev
EHNDROIX IV 14.1.1 by @AlessandroXCV
[KK][05.01.2014]CenterClockDate+Color - transparent + S3/S4 Themed [CM Based] by @rodman01
[UNOFFICIAL][AOSP][4.4.2][KOT49H] SuperNexus 4.0 - galaxysmtd - Build 1 [05-01-14] by @ts1506
Mokee Opensource Project RELEASE Ver. MK 44.2 (kitkat 4.4.2) by @segu45
[4.4.2] IllusionRom [Experimental] by @ driodmaster92
[linaro] Lightweight CM11 with Mackay kernel by @djdeeles
[4.4.2][AOSP]Smasher X Mini -5.0.3- by @Cjen1987
[4.4] Avatar ROM for Samsung Galaxy S (galaxysmtd) by @bippi79
[UNOFFICIAL][AOSP][KK][4.4.2][KOT49H] SuperNexus 4.0 BUILD1 - I9000 by @aways
[AOSP][4.4.2][UNOFFICIAL] CarbonRom by @The_Wolf91
[OMNI] [Team D.I.R.T] Dirty Unicorns 4.4.2 - Galaxysmtd v5.0 by @The_Wolf91
[4.4.2] VanirAOSP [Unofficial] by @driodmaster92
[4.4.2][UNOFFICIAL] Resurrection Remix® 4.4.2 KitKat v5.0.0 by @rodman01
[4.4.2][06/02/14]Beanstalk I9000 Unofficial by @sooti
[ROM][MULTI-OS]Project Seaspray - Touchwiz Resurructed [KITKAT] by @muftiazan
[4.4.2 BUILD_3.1_BETA_i9000]NEW Dokdo-Project by @slg1119
[4.4.2]Nameless ROM for the Galaxy S I9000 by @SferaDev
Gapps for 4.4 ROM's
Here | Here | Here | Here | Here
Kit Kat ROM's are still in Alpha/ Beta / RC stage as such will have unresolved problems and bugs.
Follow Developers Flashing Instructions as given in their thread & Report Bugs in their threads too.
Kitkat 4.4 Kernels developed by XDA members for i9000
Semaphore by @stratosk
Mackay kernel by @kasper_h & Here
Cyancore Kernel by @ts1506
Stock CM11 kernel + Linaro 4.8 and Mackay TWRP by @didhiy
[KERNEL][4.4.2] NeatKernel v1.03 [cma][swap] by @mohammad.afaneh
[KK 4.4][JB 4.3/4.2/4.1][ICS][MIUI][CWM/ODIN][I9000/B] GearKernel by @Alberto96
CWM
CWM 6.0.4.7 Advanced Edition / PhilZ Touch 6.12.8 + exFAT + NTFS + MTK by @Phil3759
Apps that can be used for settings/system
Trickster MOD - kernel manager
SELinux Mode Changer
NS Tools
ZRAM Status
Power Toggles
Switchit - band selection
Performance control
Storage Analyzer
Andromizer
LMK Whitelist v2.0
OMNI Switch
Semaphore Manager version 4.0.0
Zips Downloads
bigmem libs KK 4.4 JB 4.3
DSP Manager
FAQ ( Frequently Asked Questions)
How can I flash Kit Kat on my i9000?
[Tutorial] How to Unbrick, Flash, Downgrade, Root, Update i9000 from Froyo to Kit Kat
You can Jump from Gingerbread 2.3.6 to JellyBean 4.3 to Kit Kat 4.4 ( meaning you need 4.3 recovery to flash Kit Kat 4.4 as well as a gingerbread 2.3.6 bootloader)My Device not booting into Kit Kat, why?
Did you follow the given installation procedure by the developer of the ROM you chose? you can download the Zip again, or enter recovery and flash that zip again, (if you are sure the download was not corrupted). or flash a Kit Kat kernel
Basic
When using CWM recovery perform wipe data/factory reset and in mounts and storage section format system.
When using TWRP choose advanced in wipe section and wipe dalvik cache, cache, system and data.
to flash the ROM zip, let it boot first after that enter recovery and Flash the Gapps zip
How to solve Device working perfectly except it reboots into CWM randomly
Deactivate Deepidle in Semaphore manager appWhat is ART?
Read This & [Explained] ART Runtime in Android 4.4(kitkat)
[DISCUSSION] ART v DALVIK VM & Art Compatibility List of AppsWhat is CMA?
CMA means Contiguous Memory Allocator Read this for more details. It allows memory usually reserved for hardware to be freed for use by applications when such hardware are not in-use.Why "Development " option is missing ? How can I tick "USB Debugging"?
Click System Information in Settings and tap Build Version 7 times and Development Option will be unlocked Why my Play store, google apps missing?
Flash the correct gapps , as suggested by the developer How to get over crashes like "Unfortunately, the process android.process.......stopped"
Do a factory reset, if did not resolve format system too.
How to get over apps force closing?
Clear its data, cache and reboot, & you can uninstall and re-install that app, if that fails or do a full wipe of deviceWhy my External SD card not accessible in USB Storage Mode?
unresolved issue, workaround try mounting it in recovery How to get Root Access?
a) Update SU Binaries, reboot
b) Check Development Option for Root Access or performance settings for Superuser Settings
c) Flash Super Su Zip in .Recovery
Problems that may arise in the future : Read How To SU
How can I return to a 4.3 ROM from 4.4 ROM?
Flash a 4.2 Kernel (or lower for lower versions) and use the CWM Recovery to do the Full wipes, flash the 4.3 ROM you want and reboot. How to stop my notification light from staying on endlessly ?
Use Settings > Sounds > Quiet hours > tick Disable notification light Getting metadata error when flashing?
Change your recovery to CWM 6.0.4.5 or latest TWRPMy "This" or "That" App is not working on Kit Kat, why?
Not All Apps may have been updated for Kit Kat, so try updating them at Play Store or wait for updates to be rolled out.
Having Delay during incoming calls
Do this ( Push these apps to /system/priv-app/ and reboot.) How can I update CM?
Use CM Updater via Settings > CMUpdater > Config for Nightly searching or cyan delta app from play store to update Getting unknown installation error "-24" when trying to install an app
Clear or delete previous data for that app in /data/data/Why my sms converts to mms when message is long?
Use messaging app settings menu and untick group messaging or use 8sms or other SMS app to solve itGetting "insufficient storage available" error message in the play store when trying to install an app?
Wipe dalvik cache, dalvik run-time cache and try again
Why Insufficient Storage? , getting "No space left on device"
Use Storage Analyzer app from Play Store to identify what is taking up space in /data and /datadata and delete junk files in it How to run games without lags?
Try adjusting the DPI, follow this guide but do be carefulHow to remove navigation bar? Here
How to remove search bar? Here
How to get transparent status bar? Edit "ro.config.low_ram=true" to false in "build.prop"
FAQ from Slimroms
FAQ from CyanAOSP
Check this out!Links to useful Guides and " Banned " Documentaries
i9001 Current Development
4.4 Kit Kat ROM's developed by XDA members for i9001:-
[9001][ROM][ION][KK][4.4.2][KOT49H] CyanogenMod 11.0 by ADC-Team - Beta 1 (ION) - Kernel 3.4.x
Kernel 3.4 ION+PMEM ADSP: K^Kernel 3.4.x for KK 4.4 - K^Kernel 3.4.x for JB 4.3 - K^Kernel 3.4.x for JB 4.2.2i9001 FAQ
by @DevConnection_Team
Here M110S Current Development
[Tutorial] How to flash Kit Kat on Korean Galaxy S / M110S using Kit Kat Patch Samsung SHW-M110S [Galaxy S] KitKat PatchTool, 3.0 Kernel by @sktjdgns1189
Guys tell us why you liked or disliked a ROM and and it will be linked here for reference, but understand its only your opinion and it may differ from others point of view, still its welcomed here
REVIEWS
C-RoM -4.4 !!!!
work very fast , easy to use , very beuatiful rom , save a lot battery. very reccomend!!
I have cm 11 nightly version 20140101 on my i9000 and it's by far the best rom I've found. It's sleek, light, fast, user friendly and consists of very few bugs.
Sent from my GT-I9000 using xda app-developers app
incoming call transparant
I don't know whether this is the right thread to post in but I do have an annoyance to report.
Is it intended for the incoming call screen to be transparent as below.
AFAIK its a solid black since ICS??
I was given my Galaxy S by my brother and have only used it to play with so far, my prime use, apart from as a phone, was to have been as a replacement for my stand alone TomTom satnav.
I have tried many many roms but the satellite lock on time has been far far to long so the phone was always kept in the drawer. I have now resurrected the Galaxy S and played with both KitKat roms released by ts1506 as well as EHNDROIX IV 14.1.1. I have to say that with EHNDROIX IV 14.1.1 installed, with TomTom maps, satellite lock on is now virtually the same as with my TomTom 950 and I am now at last using my Galaxy S daily. I am now a very happy chappie indeed.
Both Roms by ts1506, regarding satellite fix times, are also very very good it's just that I installed EHNDROIX IV 14.1.1 last.
May I also add that by visiting this great forum I have certainly learned a lot and it has certainly brought me many happy hours in my retirement. :good:
Can I install a kitkat rom in a Galaxy S with an internal corrupt memory?
i9000 CM11 M2 ( milestone 2) released
CM 11 M2
Download from here
rulinho said:
Can I install a kitkat rom in a Galaxy S with an internal corrupt memory?
Click to expand...
Click to collapse
yes, should be possible , as procedure same as Custom ROM's
Check this out! Links to useful Guides and " Banned " Documentaries
Thanks, i'll try
I use CyanogenMod 11.0 by ADC-Team - Alpha 3 (EOL) - Kernel 3.4.x since yesterday. So far the fastest ROM I used.
Only issues are that some Apps like eg. MixZing don't work, hope that there will be a cure to this soon.
Christian_DE said:
I use CyanogenMod 11.0 by ADC-Team - Alpha 3 (EOL) - Kernel 3.4.x since yesterday. So far the fastest ROM I used.
Only issues are that some Apps like eg. MixZing don't work, hope that there will be a cure to this soon.
Click to expand...
Click to collapse
try to update the app, as some apps may have not (yet) been updated for kit kat.
Btw. I might have misread the topic but I am using it on an I9001.
Christian_DE said:
Btw. I might have misread the topic but I am using it on an I9001.
Click to expand...
Click to collapse
No problem, i9001 added
xsenman said:
try to update the app, as some apps may have not (yet) been updated for kit kat.
Click to expand...
Click to collapse
Thanks for the quick reply. I uninstalled and reinstalled the App already. Unfortunately no change.
I have switched from CM10 (which was very laggy on my i9000) to CM11, and everything is great so far!
More battery life, faster experience overall, stable, no serious bugs.
Christian_DE said:
I use CyanogenMod 11.0 by ADC-Team - Alpha 3 (EOL) - Kernel 3.4.x since yesterday. So far the fastest ROM I used.
Only issues are that some Apps like eg. MixZing don't work, hope that there will be a cure to this soon.
Click to expand...
Click to collapse
you've should update to the latest release with ION. it works even better and some apps like Chrome, Google Maps and several other apps wil be better.
Speaking about the Galaxy S plus wich i own, the (as we speak right now) latest CM11 by ADC team is working already really good together with K^Kernel, Its amazing that these 3/4 year old devices can get the latest and greatest versions of android and work well
i need to tests all to recommend one
bigpapanl said:
Speaking about the Galaxy S plus wich i own, the (as we speak right now) latest CM11 by ADC team is working already really good together with K^Kernel
Click to expand...
Click to collapse
Am on CM11 Beta 3 now and works quite good. Do you recommend a custom kernel or does it make more sense to stick to the standard they deliver with the package?
My vote
I love clean rom's that's why i vote Supernexus and Cyanaosp, no trash.
Dear All,
My Device Currently running on
Android 4.4.4 Custom ROM CM11 snapshop M8.
I've tried to flash the kernel to lean kernel.
http://forum.xda-developers.com/showthread.php?t=2488082
However, after i flash the kernel the screen went black after Samsung logo screen.
Is there any thing i miss out doing?
I wipe cache and dalqiv cache before I flash the kernel.
Any enlighten would be great. Sorry to post here as I couldnt google any relevant information to aid me.
Thanks in advance
lightman66 said:
Dear All,
My Device Currently running on
Android 4.4.4 Custom ROM CM11 snapshop M8.
I've tried to flash the kernel to lean kernel.
http://forum.xda-developers.com/showthread.php?t=2488082
However, after i flash the kernel the screen went black after Samsung logo screen.
Is there any thing i miss out doing?
I wipe cache and dalqiv cache before I flash the kernel.
Any enlighten would be great. Sorry to post here as I couldnt google any relevant information to aid me.
Thanks in advance
Click to expand...
Click to collapse
Try downloading leanKernel 3.1 AOSP version.
Usually because lean and temasek updates very often due to commit changes, their newer kernels usually break older versions of CM by showing a black screen after you see SAMSUNG GALAXY NOTE 3.
The old(er) kernels will work for sure, don't use the latest update. If a previous update doesn't work, move back a step.
Hi all so I've tried to find answer to my question but all i got was ded end.
I would like to boot 2 touchwizz roms, primary would be Deathlord N5 port and secondary would be some slim stock rom (fully working camera).
Is this possible and how?
CROrION said:
Hi all so I've tried to find answer to my question but all i got was ded end.
I would like to boot 2 touchwizz roms, primary would be Deathlord N5 port and secondary would be some slim stock rom (fully working camera).
Is this possible and how?
Click to expand...
Click to collapse
Take a look here.
http://forum.xda-developers.com/showthread.php?t=3091764
Sent from my SM-N920C
To confirm, the link posted by "Rosli59564"
Is confirmed and working.
I have been using this with Darklord N5 port, and Cm12.1 Temesek Build.
I have never had it working with CM Rom as Primary, only had success in TW as Primary then Additional rom as AOSP or another TW version
Hey guys! I'm trying to understand on which stock ROM you have flashed a Nougat custom ROM.
Personally, I'm on the latest RETEU 6.0.1 MPDS24.107-52-5 + January security patch (I don't remember, maybe 107-70) and I run AospExtended 4.3 with Optimus kernel r21.
So... what's your base firmware? Is it all ok?
I am using the combination you read in my signature. I have to disable HW overlays after every restart in order to have full screen video and stock camera working right. Except those, the device is faster and i love it.
melodystyle2003 said:
I am using the combination you read in my signature. I have to disable HW overlays after every restart in order to have full screen video and stock camera working right. Except those, the device is faster and i love it.
Click to expand...
Click to collapse
And what is the stock ROM you have on the base?
Hm, didn't notice that part of your question from my tablet. If it may be of any help, i was using stock mm 6.0.1 but i erased system, data, cache and dalvik (clean installation) prior flasing the AOSiP 6.0.
melodystyle2003 said:
Hm, didn't notice that part of your question from my tablet. If it may be of any help, i was using stock mm 6.0.1 but i erased system, data, cache and dalvik (clean installation) prior flasing the AOSiP 6.0.
Click to expand...
Click to collapse
The latest? And which version? European, Asian...
This one: XT1562_LUX_RETASIA_DS_6.0.1_MPDS24.107-52-5_cid7_subsidy-DEFAULT_CFC (which i used to convert it from single sim to dual sim). There is also a newer one, you can find it here.
Device _a6000 1gb ram variant
By your good experience, I need suggestions for a good 32-bit ROM developed till now. Lag free running of phone, and battery backup are the main concerns.Plz suggest suitable kernel too. Replies are much appreciated. Thankyou.
Redemptioner_ said:
Device _a6000 1gb ram variant
By your good experience, I need suggestions for a good 32-bit ROM developed till now. Lag free running of phone, and battery backup are the main concerns.Plz suggest suitable kernel too. Replies are much appreciated. Thankyou.
Click to expand...
Click to collapse
Stock ROM with MoStock kernel is good. Try it.
However, if you want a little lightweight ROM, you might want to try @ED300's CyanogenMod 11.
You might also like ED300's CyanogenMod 12.1 as well. However, the latest updates, I find, are a little slow on my phone.
You can also flash MoStock on said CM11, but I haven't tried it, as you have to repackage some modules for WiFi & such.
I personally am on CM11 update 11 (with no special kernel) right now.
AsCi1 said:
Stock ROM with MoStock kernel is good. Try it.
However, if you want a little lightweight ROM, you might want to try @ED300's CyanogenMod 11.
You might also like ED300's CyanogenMod 12.1 as well. However, the latest updates, I find, are a little slow on my phone.
You can also flash MoStock on said CM11, but I haven't tried it, as you have to repackage some modules for WiFi & such.
I personally am on CM11 update 11 (with no special kernel) right now.
Click to expand...
Click to collapse
CyanogenMod 11 is a KitKat based ROM as far as I know and currently I am on RR 5.8.4 64-bit nougat ROM . Can you please tell does it require a specific procedure to flash from Android N to K or is it okay to flash normally like wipe > adv wipe > cache , dalvik , system / flash ROM , gapps , reboot.
Redemptioner_ said:
CyanogenMod 11 is a KitKat based ROM as far as I know and currently I am on RR 5.8.4 64-bit nougat ROM . Can you please tell does it require a specific procedure to flash from Android N to K or is it okay to flash normally like wipe > adv wipe > cache , dalvik , system / flash ROM , gapps , reboot.
Click to expand...
Click to collapse
Reverting to KitKat from Android 5.1+ (Lollipop, Marshmallow & Nougat) requires you to flash stock KitKat ROM.
Or you can try this firmware: https://forum.xda-developers.com/le...itkat-lolipop-firmware-base-switcher-t3249046
Though I haven't tested this myself, I believe it will work fine.
---------- Post added at 07:39 AM ---------- Previous post was at 07:04 AM ----------
Since you are on Nougat:
- Download KitKat firmware.
- Wipe dalvik, cache, data, system (don't wipe internal).
- Flash KitKat firmware & then flash the CM11 ROM over it.
If you choose to flash Stock KitKat ROM, do the normal flash:
- Wipe cache, data, system, dalvik & then flash Stock KitKat ROM.
Doing the latter (flashing KitKat ROM) will bring your device to the state of first, out-of-the-box, fresh boot.
What this means is that you'll have to start all over again (i.e flash recovery again).
go for official lineage by harsh
have been using it for one month or so , its flawless and works without lag
RR 7.1 May 9 build. try this. smooth for my lenovo 1gb.
Have you faced wifi problem in stock kk with mostock kernel? I can't turn on wifi , for turning on , device needs a reboot
AsCi1 said:
Stock ROM with MoStock kernel is good. Try it.
However, if you want a little lightweight ROM, you might want to try @ED300's CyanogenMod 11.
You might also like ED300's CyanogenMod 12.1 as well. However, the latest updates, I find, are a little slow on my phone.
You can also flash MoStock on said CM11, but I haven't tried it, as you have to repackage some modules for WiFi & such.
I personally am on CM11 update 11 (with no special kernel) right now.
Click to expand...
Click to collapse
Sumer_7 said:
Have you faced wifi problem in stock kk with mostock kernel? I can't turn on wifi , for turning on , device needs a reboot
Click to expand...
Click to collapse
Sorry, no such problem for me.
Try to flash ROM again.
Best of luck.
:good:
vishal_kaushal said:
go for official lineage by harsh
have been using it for one month or so , its flawless and works without lag
Click to expand...
Click to collapse
Can u plsss give the link for official lineage OS for a6000???