Hi all so I've tried to find answer to my question but all i got was ded end.
I would like to boot 2 touchwizz roms, primary would be Deathlord N5 port and secondary would be some slim stock rom (fully working camera).
Is this possible and how?
CROrION said:
Hi all so I've tried to find answer to my question but all i got was ded end.
I would like to boot 2 touchwizz roms, primary would be Deathlord N5 port and secondary would be some slim stock rom (fully working camera).
Is this possible and how?
Click to expand...
Click to collapse
Take a look here.
http://forum.xda-developers.com/showthread.php?t=3091764
Sent from my SM-N920C
To confirm, the link posted by "Rosli59564"
Is confirmed and working.
I have been using this with Darklord N5 port, and Cm12.1 Temesek Build.
I have never had it working with CM Rom as Primary, only had success in TW as Primary then Additional rom as AOSP or another TW version
Related
I have an L5 II E615(f) rooted. Last 2 days I tried to flash another rom for the first time.
So, I got latest CWM installed using ROM Manager and tried to flash this ROM:
[L5][E610/E612/E617][ROM][KOT49H][4.4.2][BETA 2] Pure AOSP KITKAT 4.4.2
Followed all the instructions properly, I put the ROM in external SD card, did factory reset, and wiped all caches, then flash the ROM and GApps. After the reboot, I got inside the new ROM but my touchscreen isn't working at all, but the volume and power button works.
Tried this ROM too (I entered the recovery mode by taking the battery off and put it back on, pressed power+volume down > and pressed 'back' button) [L5][E610/E612/E617][ROM][KTU84P][4.4.4][BETA 9.4] Unofficial CyanogenMod 11 Build , still not working. So I thought it's because the ROM doesn't support E615 ([L5][E610/E612/E617]) So I tried to install other ROMs:
[L5][ROM][4.4.4][AOSP] Vanir weeklies, Fast and smooth
[L5/L7][4.4.4][KTU84P][FINAL]Unofficial Paranoid Android 4.4 rom build by Cr3pT
They don't mention the exact type of the phone, but none are working still. Now I'm stuck with the first ROM forever in the lockscreen LOL. I'm pretty sure I followed the instructions properly.
Where's the problem? is it the ROM or another things? Or maybe can you suggest me some ROMs that might work with my device? I really want 4.4.x ROMs though Your helps are all appreciated. Thank you very much!!
Tried to flash
[L5][L7][UNOFFICIAL]SlimKat[OPTIMA TEAM][4.4.4] and CM 10 for E610
still same problem, touch screen not working. Someone please tell me what ROM should i use :crying:
You have installed a L5 E610/E612 ROM on L5 E615 which is dual sim?
Try a ROM meant for E615, like BhekBhek and check if touch works there..
Also, do you have sim card inserted? Because for me, despite having E612, touch didn't work without sim..
skyinfo said:
You have installed a L5 E610/E612 ROM on L5 E615 which is dual sim?
Try a ROM meant for E615, like BhekBhek and check if touch works there..
Also, do you have sim card inserted? Because for me, despite having E612, touch didn't work without sim..
Click to expand...
Click to collapse
Yes, I installed the ROM, only touchscreen not working. Those ROMs for E615 still have 'ugly' animation I think I'll use it temporary because my phone's been disabled for the last 2 days haha.
And yeah, I had my sim card inserted.
rangecrate said:
Yes, I installed the ROM, only touchscreen not working. Those ROMs for E615 still have 'ugly' animation I think I'll use it temporary because my phone's been disabled for the last 2 days haha.
And yeah, I had my sim card inserted.
Click to expand...
Click to collapse
Replacing some files might help too..
Use porting guide by Caliban (in general section) (Guide is for porting from P700 to E610) .. There there will be some files listed, replace those files with a ROM designed for E615.. Hopefully should work..
Battery will be (most probably) pathetic though, you need a E615 kernel ..
skyinfo said:
Replacing some files might help too..
Use porting guide by Caliban (in general section) (Guide is for porting from P700 to E610) .. There there will be some files listed, replace those files with a ROM designed for E615.. Hopefully should work..
Battery will be (most probably) pathetic though, you need a E615 kernel ..
Click to expand...
Click to collapse
That would be really cool, I can't find the guide though, and if it's really complicated I won't be able to do that because I'm still a beginner haha. Maybe I should wait for another months for someone to do it. For now I'll try this one
Looks cool, too bad it's discontinued. Wanted to try BhekBhek but the download link is broken (or is it me?). I'm really obsessed of KitKat's UI though :silly:
Another Topic
Another thing, does anyone know how to hide SIM 2 icon and/or tint them to white? Because they look ugly when I'm using Tinted Status Bar, thanks.
Here this is the guide
http://forum.xda-developers.com/showthread.php?t=2428797
Let me know the result
Replace the files mentioned there with the ones from a E615
Hopefully should work, good luck!
Sent from my Galaxy Note 3 using Tapatalk
Can I use any android 5.0 rom as secondary rom by the dual boot switcher app?
I have phoenix v 10.2 as my primary rom , and wanna make any android 5.0 rom as secondary ................
is android 5 roms support the dual boot system or not? because I tried about 5 rom based on 4.4.4 kk as secondary and all worked well
Device : i9505 ............... ROM : phoenix v 10.2 Kernel : phoenix own Kernel
thank you
I would say no because Kitkat uses Dalvik and Lollipop uses ART
OmarManLover said:
Can I use any android 5.0 rom as secondary rom by the dual boot switcher app?
I have phoenix v 10.2 as my primary rom , and wanna make any android 5.0 rom as secondary ................
is android 5 roms support the dual boot system or not? because I tried about 5 rom based on 4.4.4 kk as secondary and all worked well
Device : i9505 ............... ROM : phoenix v 10.2 Kernel : phoenix own Kernel
thank you
Click to expand...
Click to collapse
yes you can go ahead with it
Pisanoid said:
I would say no because Kitkat uses Dalvik and Lollipop uses ART
Click to expand...
Click to collapse
Seriously?!!
Please advice if you know what you are talking about.
I'm having
TW in primary
GPE lollipop as dual
CM12 as multislot1
And the list goes on...
MohamedN said:
Seriously?!!
Please advice if you know what you are talking about.
I'm having
TW in primary
GPE lollipop as dual
CM12 as multislot1
And the list goes on...
Click to expand...
Click to collapse
Perhaps I should have mentioned that what I said was based on my personal experience. That said, I could run 4.3 TW and 4.4 Google Edition just fine if they were both on dalvik, but I couldn't run any of the two if I enabled ART in 4.4. When TW 4.4 came out it was the same thing: if the runtimes were not the same I would get FCs and RRs within 3 seconds of booting. That said, I don't know if MultiBoot development advanced to the point this is no longer a problem.
Pisanoid said:
Perhaps I should have mentioned that what I said was based on my personal experience. That said, I could run 4.3 TW and 4.4 Google Edition just fine if they were both on dalvik, but I couldn't run any of the two if I enabled ART in 4.4. When TW 4.4 came out it was the same thing: if the runtimes were not the same I would get FCs and RRs within 3 seconds of booting. That said, I don't know if MultiBoot development advanced to the point this is no longer a problem.
Click to expand...
Click to collapse
You are speaking of multiboot manager and he was asking about dual boot patcher
Both amazing but very different in the way they work..
Cheers man
thank you for all , I will check if it goes right
Hi,
Anyone can make this to ks01lte?
Today I tested AOKP rom (from gugu0das blog, to korean i9506) ; rom smoothly and as customizable as the RR, but with better use of Ram.
The port have any bugs (like mmi codes and lack kill all tasks) and apparently the project is dead.
Ive tried to port (my firt try, im a f***ing newb), but my result is an useless zip.
Thanks.
jqm_ said:
Hi,
Anyone can make this to ks01lte?
Today I tested AOKP rom (from gugu0das blog, to korean i9506) ; rom smoothly and as customizable as the RR, but with better use of Ram.
The port have any bugs (like mmi codes and lack kill all tasks) and apparently the project is dead.
Ive tried to port (my firt try, im a f***ing newb), but my result is an useless zip.
Thanks.
Click to expand...
Click to collapse
You can try GZR ValidusOS.
Can't seem to find a non-stock ROM that square register works on that is Nougat based, was working fine on 6.0.1 custom ROM...
blast0id said:
Can't seem to find a non-stock ROM that square register works on that is Nougat based, was working fine on 6.0.1 custom ROM...
Click to expand...
Click to collapse
Really, no one at all?
I am unable to connect to mirascreen hdmi cast through smart view in Samsung Note 3 running Marshmallow. It is connecting with rooted Samsung S3 running KitKat without any issues. I also tried by adding "wlan.wfd.hdcp=disable" in build.prop but still no use.
Pls help.
What rom ????
See your identical post ??
Phronesis v5. Model N900W8
If it works on a stock ROM but not the custom ROM, sounds like the ROM is not capable of that function on the phone.
audit13 said:
If it works on a stock ROM but not the custom ROM, sounds like the ROM is not capable of that function on the phone.
Click to expand...
Click to collapse
It works on custom rom till TW v5.1.1 but it is not working on TW v6.0.1
There is no stock mm ROM for the note 3 so it sounds like smart view needs a stock ROM or a custom ROM based on a stock LP ROM.
audit13 said:
There is no stock mm ROM for the note 3 so it sounds like smart view needs a stock ROM or a custom ROM based on a stock LP ROM.
Click to expand...
Click to collapse
But many are saying Smart view works on their Note 3 phone with custom marshmallow rom. For me it works only when newly installing the rom and later it suddenly stops working.
Maybe ask in the ROM thread? I'm not sure why if would stop working.