Database Users

JW MIUI 1.7.1 crashes often

Hello guys,
i have big problems with JW MIUI 1.7.1. It is very unstable for me. I am using MIUI since a long time and I flashed the new one before a few days.
I flashed it with Clockwork recovery. My problem is that it often crashes and reboots automatically. I cant say when this happens but it happens about 10 times per day.
Where can i read errors from?
In the JW MIUI 1.7.1 thread is written that Clockwork users have to install an update but when I flash this magldr says "Boot kernel load failed".
Can anyone help me? I love MIUI and the ROM is great again but these heavy crashes suck
Thanks a lot and sorry for my bad english

markokk said:
Hello guys,
i have big problems with JW MIUI 1.7.1. It is very unstable for me. I am using MIUI since a long time and I flashed the new one before a few days.
I flashed it with Clockwork recovery. My problem is that it often crashes and reboots automatically. I cant say when this happens but it happens about 10 times per day.
Where can i read errors from?
In the JW MIUI 1.7.1 thread is written that Clockwork users have to install an update but when I flash this magldr says "Boot kernel load failed".
Can anyone help me? I love MIUI and the ROM is great again but these heavy crashes suck
Thanks a lot and sorry for my bad english
Click to expand...
Click to collapse
Did you try a clean install?
Just use the daf thats inside the download file. Make sure you change the flash.cfg file as suggested.
I always do a MIUI backup than clean install (also repartition sd card) and flash. After that use Backup to get your apps back again.

Thanks for your fast answer mate.
I formatted and repartitioned the sd card too. But inside the zip, where is the DAF? I didnt find it that is why i flashed clockwork and then flashed the zip with clockwork.
What do you mean with chaning the flash file??
Thanks a lot

Problem to Install Creed's Rom 3.5

hii, I am a user of Galaxy Y S5360 also a new comer member of this site, guys please help me. Well now tell you myphone was in good condition. last night I installed creed's rom 3.5,(before installing it I had Ultimate Sonic Rom). as usual I did every steps properly but while the logo is caming after rebooting the phone (Samsung Galaxy Y) its stuck, I waited for 5 hrs but still same.. So I removed the battery and turn the phone again and do the steps again but no effect still the same its stuck.. Guys please help me out from this situation? Can any one tell me why it happening? though I did properly. . . . Thanks for your listening.
why it stuck after rebooting, while other Rom works properly? Or Can I never installed creed's rom 3.5 in my phone? please help.
one of my friend was told me about some process that CWM recovery and some Nandroid backup, (but as I dont did before), So I dont understand, dont get that point exactly.
Can you please show me a way, What should I do now?

You can always flash back to stock ROM via Odin sir. Just download a firmware package from sir Doky's site: http://forum.xda-developers.com/showthread.php?t=1465800, then after you flash back to stock ROM, you can always flash another custom ROM.
If you ever get any problems with flashing a custom ROM, you can always restore back to stock ROM. And a friendly reminder sir, always do a back-up of your phone using CWM recovery, it is not that hard, just put the CWM folder in the root of your SD card. Just find a thread here with a CWM recovery.

I face this proplem every time I install Creeds 3.5 So here how it can be fixed :-
1-Make sure that you'r on stock kernel
2-in cwm just go to mounts and storage then format system
3-wipe data & cache
4-install zip from sdcard then choose the .zip file and install
5-most of times it doesn't work :crying: so do step 3&4 again and it should work
-------------------------------------------------
press thnx if I helped

Look up this thread for more info - http://forum.xda-developers.com/showthread.php?t=1675474. You should have known these basics.
Sent from my GT-S5360 using Tapatalk 2

Creed Rom 3.5 IMEI no. lost
Hi.. i'm a new user... and i was running galaxy y s5360 stock Rom.. and i flash Creed rom v3.5, everything is awesome but my IMEI is lost no network. i like this Rom. how do i fix this problem...? Hope you'll help me.
Thank You

Brick? Hardware/Software bug?

Hi guys,
Yesterday, i turned off my device to sleep. When i turnet it on, it restart 3 times in sequence, than i take off battery , waited 1min e turned on again. But, it wasnt load OS, it freezed at Samsung logo.
So i decided to try restore the custom room (Google Edition), but i cant entered at cwm recovery, freezed downloading mode screen. Than i tried to flash with odin cwm again. Flash sucessfully but could not load cwm.
Than im started to getting panic, nervous and patience gone. I downloaded from sammobile the stock room and flash with odin. It isnt work again. After flash, the phone boot and freeze for loooooong time at screen with blue text recovering boot and Samsung logo.
I tried from KIES too, but have no sucess...
I dont know what I must have to do anymore. My ideas, knowlodge are now over. Is that any possible about triangle way cause this ? My device doesnt boot anymore. Always freezing screen. I waited for many minutes, like 20minutes and nothing.
Files that i downloaded:
- I9505_VJUBMG3_STOCK_RECOVERY.tar.md5
- I9505VJUBMG3_STOCK_KERNEL.tar.md5
- I9505VJUBMG3-PRE-ROOTED-ODEX-FULL.tar.md5
- I9505VJUAMDM_I9505ZTOAMDM_I9505VJUAMDM_HOME.tar.md5
- and Philz recovery, CWM recovery.
Guys, what really happened?

funny thing
tha same happened to me last week.
I fixed it by downloading another version of Stock Rom for s4 and flashing it with odin.
The stock rom I used had only 1 file (1.7gb) and flashed it using only the pda button.
maybe it will work for you also.
oh and by the way
I used team win recovery project instead of CWM recovery

j1miroquai said:
funny thing
tha same happened to me last week.
I fixed it by downloading another version of Stock Rom for s4 and flashing it with odin.
The stock rom I used had only 1 file (1.7gb) and flashed it using only the pda button.
maybe it will work for you also.
oh and by the way
I used team win recovery project instead of CWM recovery
Click to expand...
Click to collapse
I9505VJUAMDM_I9505ZTOAMDM_I9505VJUAMDM_HOME.tar.md 5 this is a stock room, 1.7gb. After i flashed this, it freezed at Samsung Logo with blue text recovering boot
i will try team win recovery too.
Man what else you did to fix it? im going for 2nd day without mobile...

I used this one
hxxp://hotfile.com/dl/231752980/98f5969/EUR-I9505XXUBMEA-20130624154055.zip.html
it's a stock Greek Rom (I'm from Greece )
I just installed it via odin 3.07 , placed the rom on the pda button and that`s it.
after that I installed team win recovery project via Odin again .(and again on the pda button)
the link is this one hxxp://teamw.in/project/twrp2/182
hope it will help you

j1miroquai said:
I used this one
hxxp://hotfile.com/dl/231752980/98f5969/EUR-I9505XXUBMEA-20130624154055.zip.html
it's a stock Greek Rom (I'm from Greece )
I just installed it via odin 3.07 , placed the rom on the pda button and that`s it.
after that I installed team win recovery project via Odin again .(and again on the pda button)
the link is this one hxxp://teamw.in/project/twrp2/182
hope it will help you
Click to expand...
Click to collapse
Yeah, i think my problem isnt the room, because i have 2 here, one default from sammbile and other I9505VJUBMG3-PRE-ROOTED-ODEX-FULL.tar.md5
My problem is after flash the room, it isnt boot. It stop at Samsung logo with blue text recovering boot. How long did you waited for this? Or you just disconnect cable after reboot and flash again to teamwin ?

GuiCunha said:
Yeah, i think my problem isnt the room, because i have 2 here, one default from sammbile and other I9505VJUBMG3-PRE-ROOTED-ODEX-FULL.tar.md5
My problem is after flash the room, it isnt boot. It stop at Samsung logo with blue text recovering boot. How long did you waited for this? Or you just disconnect cable after reboot and flash again to teamwin ?
Click to expand...
Click to collapse
Flash the new Brazilian rom with odin ( http://www.hotfile.com/dl/234152687/723aa16/I9505VJUBMG3_I9505ZTOBMG3_ZTO.zip.html ).
Wait reboot. Power off, and reboot in recovery mode, wipe data + cache (Vol Up+Home+Power).
The first time, you need wait a lot of time (1~20 minutes).

RATOz said:
Flash the new Brazilian rom with odin ( http://www.hotfile.com/dl/234152687/723aa16/I9505VJUBMG3_I9505ZTOBMG3_ZTO.zip.html ).
Wait reboot. Power off, and reboot in recovery mode, wipe data + cache (Vol Up+Home+Power).
The first time, you need wait a lot of time (1~20 minutes).
Click to expand...
Click to collapse
Ok, i did. Waiting recovering boot....

GuiCunha said:
Ok, i did. Waiting recovering boot....
Click to expand...
Click to collapse
Did you try what I've told you?
Enviado do meu Galaxy S4 4G turbinado com Omega Rom + KT

dandroid13 said:
Did you try what I've told you?
Enviado do meu Galaxy S4 4G turbinado com Omega Rom + KT
Click to expand...
Click to collapse
Yes buddy, but that room is flashable with recovery mode and i cant entered into recovery. Or i made a mistake and download the wrong room?

GuiCunha said:
Yes buddy, but that room is flashable with recovery mode and i cant entered into recovery. Or i made a mistake and download the wrong room?
Click to expand...
Click to collapse
That was a Odin file...
Enviado do meu Galaxy S4 4G turbinado com Omega Rom + KT

dandroid13 said:
That was a Odin file...
Enviado do meu Galaxy S4 4G turbinado com Omega Rom + KT
Click to expand...
Click to collapse
OMG!
Give me the download link please! I've downloaded a lot, lot of links...
Please. I pay you a beer soon.

RATOz said:
Flash the new Brazilian rom with odin ( http://www.hotfile.com/dl/234152687/723aa16/I9505VJUBMG3_I9505ZTOBMG3_ZTO.zip.html ).
Wait reboot. Power off, and reboot in recovery mode, wipe data + cache (Vol Up+Home+Power).
The first time, you need wait a lot of time (1~20 minutes).
Click to expand...
Click to collapse
Are you sure that it delays 20 minutes?

Tried entering recovery with TWRP?

I think there is something before enter recovery system. That is my problem.

GuiCunha said:
I think there is something before enter recovery system. That is my problem.
Click to expand...
Click to collapse
But you should try it too!

dandroid13 said:
But you should try it too!
Click to expand...
Click to collapse
I've alredy tried. :\
Thanks anyway.

GuiCunha said:
I've alredy tried. :\
Thanks anyway.
Click to expand...
Click to collapse
TWRP isn't CWM, didn't see you mention it yet.

Today i must to give up, because time is against me. I leave the device at samsung assistence. Lets see what they will say for me.
I dont have screenshots, but im sure that i follow all those steps correctly. I tried many ways with odin, ticking unticking things, step by step.
By the way, im so happy with all here tried to help me. The beautifull word that i can say is Thanks, thanks guys!
Weird think: Switching from S4 for X10 is a punishment! My old and warrior X10 have no more battery life, like a mini screen now, slow cpu... but its ok, is better than my x810i.
Thank You guys (all people that help me), for everything.

[Q] Bootloop specific problem

Hello
So i was ready yesterday to install a new android rom, going from GingerBread to JB(Pixeldroid 4.2.2). Later that day, i encountered a Bootloop problem while still on the GB, so i decided to install JB. I did it succesfully. Before going to JB i installed stock WM 6.5 just for a bit, and had no bootloop problem.
Then i went to JB on NAND (GB was on NAND too ) and then it started to bootloop again :/ Now, i don't know what to do and i have an extra problem. My power/end call button is dysfunctional (completely). Please help!
EDIT: I can't help but notice there are a lot of bootloop threads from yesterday and today. Weird isn't it?
EDIT2: Well, now i can use the power button. Yay for copper wires!
EDIT3: Now i partitioned the system 360M/5M cache, just as written in the thread (didn't notice that bit before :/ )
Now, it's just stuck on the boot for quite some time, keeps going and no change. If it's significant, i noticed before, when the HD2 was plugged in to charge, first the LED light got orange, then the loop happens. Now it's not glowing orange.

Well ...
Accelerator46 said:
Hello
So i was ready yesterday to install a new android rom, going from GingerBread to JB(Pixeldroid 4.2.2). Later that day, i encountered a Bootloop problem while still on the GB, so i decided to install JB. I did it succesfully. Before going to JB i installed stock WM 6.5 just for a bit, and had no bootloop problem.
Then i went to JB on NAND (GB was on NAND too ) and then it started to bootloop again :/ Now, i don't know what to do and i have an extra problem. My power/end call button is dysfunctional (completely). Please help!
EDIT: I can't help but notice there are a lot of bootloop threads from yesterday and today. Weird isn't it?
EDIT2: Well, now i can use the power button. Yay for copper wires!
EDIT3: Now i partitioned the system 360M/5M cache, just as written in the thread (didn't notice that bit before :/ )
Now, it's just stuck on the boot for quite some time, keeps going and no change. If it's significant, i noticed before, when the HD2 was plugged in to charge, first the LED light got orange, then the loop happens. Now it's not glowing orange.
Click to expand...
Click to collapse
My friend ... As I got , you installed a JB ROM on a GB ROM ? ... If thats Right , Its not a bootloop it's a mistake because the ROM hadn't installed completely but you can do a Full wipe before installing any ROM then Your ROM should boot correctly ... Any you had better name the ROM you installed ... Good luck
With Best Wishes
Hitman1376​

hitman1376 said:
My friend ... As I got , you installed a JB ROM on a GB ROM ? ... If thats Right , Its not a bootloop it's a mistake because the ROM hadn't installed completely but you can do a Full wipe before installing any ROM then Your ROM should boot correctly ... Any you had better name the ROM you installed ... Good luck
With Best Wishes
Hitman1376​
Click to expand...
Click to collapse
Well, i did manage to fix the bootloop. I did a full wipe through CWM and then i made a partition, and simply installed using the NativeSD method. Thanks anyways!

Accelerator46 said:
Well, i did manage to fix the bootloop. I did a full wipe through CWM and then i made a partition, and simply installed using the NativeSD method. Thanks anyways!
Click to expand...
Click to collapse
So the problem should be from the ROM ... Why don't you try An other NativeSD ROM ?

Galaxy s4 GT I9505 Soft brick or hard bricked? :( !SOLVED!

Hi Guys, so I felt in the mood to try to flash my phone with a new rom. I read tons of topics, saw a bunch of YouTube videos and tryed it out for my self.
But boy did it go wrong..
Here is what I did.
I downloaded Odin and CWM 6.0.3.22 and aded the Clock work thingy.
Then i booted up into flash recovery and wiped cache and data/factory
Then i tryed to install from external SD card with this rom: AOSP Official 5.0 - S4 Google Edition - Stable-R3
It failed on something and I thought, hey lets try again... failed again, then I wiped again and tryed this rom: Google Play Edition LRX219
Got some error, think it was something with 7.
Well now it wont even boot up to the original state, its just stuck on the samsung logo. I can still boot up into CWM, but thats it. Im not sure where to go from here, adn I'm afraid to keep failing more roms on this thing.
Any suggestion?
Best regards Kasper
Solved. I ended up doing this: Link
Now I'm all back to stock.

Kjohnsen said:
Hi Guys, so I felt in the mood to try to flash my phone with a new rom. I read tons of topics, saw a bunch of YouTube videos and tryed it out for my self.
But boy did it go wrong..
Here is what I did.
I downloaded Odin and CWM 6.0.3.22 and aded the Clock work thingy.
Then i booted up into flash recovery and wiped cache and data/factory
Then i tryed to install from external SD card with this rom: AOSP Official 5.0 - S4 Google Edition - Stable-R3
It failed on something and I thought, hey lets try again... failed again, then I wiped again and tryed this rom: Google Play Edition LRX219
Got some error, think it was something with 7.
Well now it wont even boot up to the original state, its just stuck on the samsung logo. I can still boot up into CWM, but thats it. Im not sure where to go from here, adn I'm afraid to keep failing more roms on this thing.
Any suggestion?
Best regards Kasper
Click to expand...
Click to collapse
Hi mate , it happen to all of us ....
That recovery you are using seems old , install the newest one 6.0.4.7 and try again
EDIT: I9500 version is 6.0.3.2 you are sure you have the right version for your phone??

MAX 404 said:
Hi mate , it happen to all of us ....
That recovery you are using seems old , install the newest one 6.0.4.7 and try again
EDIT: I9500 version is 6.0.3.2 you are sure you have the right version for your phone??
Click to expand...
Click to collapse
Thx, I just updated the CWM to 6.0.4.7 and I still get the Error (status 7) no matter what rom i choose. Any ideas?

Try flashing from internal storage rather than the external SD.

Hexgore said:
Try flashing from internal storage rather than the external SD.
Click to expand...
Click to collapse
I would if I could. RIght now i cant even put anythin on the sd card as it won't mount. Even if choose to do so from CWM.
I'm lost here. I was thinkin of doing that whole "erase some codes" to avoid the Cod 7 problem, but now I cant get to my files... Super annoying.
- I'm pretty much lost at this point.
Solved. Edited the first post. Thanks everyone.

Kjohnsen said:
I would if I could. RIght now i cant even put anythin on the sd card as it won't mount. Even if choose to do so from CWM.
I'm lost here. I was thinkin of doing that whole "erase some codes" to avoid the Cod 7 problem, but now I cant get to my files... Super annoying.
- I'm pretty much lost at this point.
Click to expand...
Click to collapse
hi
try flashing a twrp recovery
http://teamw.in/project/twrp2/182
http://forum.xda-developers.com/showthread.php?t=2468187
some of this newer roms work better with it , if it fails again.....start from scratch , flash stock rom again and do it all over
http://forum.xda-developers.com/showthread.php?t=2265477
---------- Post added at 05:57 PM ---------- Previous post was at 05:55 PM ----------
Kjohnsen said:
Hi Guys, so I felt in the mood to try to flash my phone with a new rom. I read tons of topics, saw a bunch of YouTube videos and tryed it out for my self.
But boy did it go wrong..
Here is what I did.
I downloaded Odin and CWM 6.0.3.22 and aded the Clock work thingy.
Then i booted up into flash recovery and wiped cache and data/factory
Then i tryed to install from external SD card with this rom: AOSP Official 5.0 - S4 Google Edition - Stable-R3
It failed on something and I thought, hey lets try again... failed again, then I wiped again and tryed this rom: Google Play Edition LRX219
Got some error, think it was something with 7.
Well now it wont even boot up to the original state, its just stuck on the samsung logo. I can still boot up into CWM, but thats it. Im not sure where to go from here, adn I'm afraid to keep failing more roms on this thing.
Any suggestion?
Best regards Kasper
Solved. I ended up doing this: Link
Now I'm all back to stock.
Click to expand...
Click to collapse
Just saw your post mate.
Glad you made it