Hello
So i was ready yesterday to install a new android rom, going from GingerBread to JB(Pixeldroid 4.2.2). Later that day, i encountered a Bootloop problem while still on the GB, so i decided to install JB. I did it succesfully. Before going to JB i installed stock WM 6.5 just for a bit, and had no bootloop problem.
Then i went to JB on NAND (GB was on NAND too ) and then it started to bootloop again :/ Now, i don't know what to do and i have an extra problem. My power/end call button is dysfunctional (completely). Please help!
EDIT: I can't help but notice there are a lot of bootloop threads from yesterday and today. Weird isn't it?
EDIT2: Well, now i can use the power button. Yay for copper wires!
EDIT3: Now i partitioned the system 360M/5M cache, just as written in the thread (didn't notice that bit before :/ )
Now, it's just stuck on the boot for quite some time, keeps going and no change. If it's significant, i noticed before, when the HD2 was plugged in to charge, first the LED light got orange, then the loop happens. Now it's not glowing orange.
Well ...
Accelerator46 said:
Hello
So i was ready yesterday to install a new android rom, going from GingerBread to JB(Pixeldroid 4.2.2). Later that day, i encountered a Bootloop problem while still on the GB, so i decided to install JB. I did it succesfully. Before going to JB i installed stock WM 6.5 just for a bit, and had no bootloop problem.
Then i went to JB on NAND (GB was on NAND too ) and then it started to bootloop again :/ Now, i don't know what to do and i have an extra problem. My power/end call button is dysfunctional (completely). Please help!
EDIT: I can't help but notice there are a lot of bootloop threads from yesterday and today. Weird isn't it?
EDIT2: Well, now i can use the power button. Yay for copper wires!
EDIT3: Now i partitioned the system 360M/5M cache, just as written in the thread (didn't notice that bit before :/ )
Now, it's just stuck on the boot for quite some time, keeps going and no change. If it's significant, i noticed before, when the HD2 was plugged in to charge, first the LED light got orange, then the loop happens. Now it's not glowing orange.
Click to expand...
Click to collapse
My friend ... As I got , you installed a JB ROM on a GB ROM ? ... If thats Right , Its not a bootloop it's a mistake because the ROM hadn't installed completely but you can do a Full wipe before installing any ROM then Your ROM should boot correctly ... Any you had better name the ROM you installed ... Good luck
With Best Wishes
Hitman1376
hitman1376 said:
My friend ... As I got , you installed a JB ROM on a GB ROM ? ... If thats Right , Its not a bootloop it's a mistake because the ROM hadn't installed completely but you can do a Full wipe before installing any ROM then Your ROM should boot correctly ... Any you had better name the ROM you installed ... Good luck
With Best Wishes
Hitman1376
Click to expand...
Click to collapse
Well, i did manage to fix the bootloop. I did a full wipe through CWM and then i made a partition, and simply installed using the NativeSD method. Thanks anyways!
Accelerator46 said:
Well, i did manage to fix the bootloop. I did a full wipe through CWM and then i made a partition, and simply installed using the NativeSD method. Thanks anyways!
Click to expand...
Click to collapse
So the problem should be from the ROM ... Why don't you try An other NativeSD ROM ?
Related
Hi guys i just did my first flash, at least i thin i did it. Here's the problem. I entered clockwormod installed CM7 and GoogleAps, then i clicked reboot system now. And after that all i get is the little blue android driving his skateboard on my screen continiously, in other words the CM7 logo is looping on my screen for half an hour now, should i restart or wait or what ???
I turned off the phone, entered clockworkmod again wiped cache and user data, flashed again, its working now. Sorry for spaming guys
edit: Sorry 1 more question, can i insall googleaps anytime i want without wiping data and flashing CM7 again ?
sir ljove said:
Sorry 1 more question, can i insall googleaps anytime i want without wiping data and flashing CM7 again ?
Click to expand...
Click to collapse
Yes, no problem with that.
I tried to install Mike's ICS rom today. I used this tutorial:
http://forum.xda-developers.com/showthread.php?t=1445816
Tried system partition sizes with 190/200/210/220. Erased everything. I used format on SD card too. Got only ICS on it. I stuck always at LG logo.
http://www.youtube.com/watch?v=Kua4p8v7ClY
This one at 0:06 sec of video.
Anyone can help? Thanks.
Cobalton said:
I tried to install Mike's ICS rom today. I used this tutorial:
http://forum.xda-developers.com/showthread.php?t=1445816
Tried system partition sizes with 190/200/210/220. Erased everything. I used format on SD card too. Got only ICS on it. I stuck always at LG logo.
http://www.youtube.com/watch?v=Kua4p8v7ClY
This one at 0:06 sec of video.
Anyone can help? Thanks.
Click to expand...
Click to collapse
go into recovery, wipe system partition, cache and davlik cache, reflash
reboot
I have recovery version v5.0.2.8 is that maybe problem?
Just doing this again as u told me, and I will post again if it doesn't help me. Thanks so far. )
Edit:
It didn't help. I tried it 2times. Now I used 250mb system partition, still not passing this LG logo.. it seems I can't run ICS on my LG GT540. :<
Might be a curropted zip file, try redownloading it, also set ur system to 200 only
Guys it takes very long to boot trust me it took me more them 5 min
bs828 said:
Guys it takes very long to boot trust me it took me more them 5 min
Click to expand...
Click to collapse
ye but from the lg logo it shouldnt hang
it hands on the bootscreen for about 10mins first boot after upgrade
mine stuck on both for very very very long
I will try to download again or I will wait for beta6 now, maybe it will work on my phone.. and hey aaa801 I tried 200mb system too, but it didn't work.
@bs828 I waited for about 20minutes on LG logo, it didn't pass. I tried to flash this in every way, but didn't get it to work so I switched again on my ASIS.
hmm weird .... yeah i think you should go back to asis but i recommend sdsl final alot better! just flash no need to wipe data from asis
I tried SDSL but it got problems, and ASIS is a lot better rom for daily use for me. SDLS gives me random freezes on lock screen, calibration is so bad I can't write properly a SMS, and I have that great theme in ASIS (Androidian), etc. Maybe it happens only on my LG, but ASIS is my top rom so far.
o i dont have such probs sdsl is the best used to be asis but now sdsd...
Wipe all, and then flash polishblood->then gapps->then new keyboard. That worked for me with 190mb partition.
I tried that. I will wait for some next release like beta8-9. I'm good with ASIS still.
How is your battery life with this rom?
Sent from my LG-P920 using XDA
Hey guys,
this is my first post and my problem is as follows:
I had ICS 4.0.x on my galaxy tab 10,1 P7500, I then installed CWM 5.5.0.4. but had a rolling window. I then continued to install a bootloader (here: http://forum.xda-developers.com/showpost.php?p=27830023&postcount=41) with the appropriate bootloader for the p4. This fixed the rolling recovery and allowed me to install CM10 using CWM.
But my current problem is when the device goes on sleep mode and I wake the device up the screen is scrambled, can anyone tell me how to fix this?
Thank you in advance
The only fix i found is for HC
http://forum.xda-developers.com/showthread.php?t=1680738
Edit:
I fixed the rolling screen issue after screen unlock with pershoot's help, thanks again pershoot!
Maybe it will also work for you , here we go:
If you have installed the latest cm10 build, there is only one issue for the p4wifi , you must be on the US ICS Bootloader .
So download the recovery.tar.md5 from here:
http://droidbasement.com/galaxy/roms/cm10/p4wifi/recovery.tar.md5
Than go into download mode and flash this recovery using ODIN, (select pda and look for this file where you safed it, than click start)
Than, download the right US ICS Bootloader here:
http://droidbasement.com/galaxy/roms/cm10/p4wifi/US_LPL_4.0.4_bootloader.zip
Flash this also via ODIN in the PDA section, this may take a little longer, don't panic...
After that, the tablet will reboot and it should work... don't blame me if it didn't, but i had this rolling screen on almost every rom, and everything is fixed now...
I wish you good luck because i know it IS very annoying..
Thanks for the reply DefQon, I agree I think this is most annoying errors I have ever gotten.
I also searched high and low and could only find the fix for HC.
DefQoN_BE said:
I have EXACT the same issue, i'm running the latest cm10 build from droidbasement.com, if anyone can please help us???
The only fix i found is for HC
http://forum.xda-developers.com/showthread.php?t=1680738
I wish you good luck because i know it IS very annoying..
Click to expand...
Click to collapse
I have tried this method and works perfectly!
Thank you sooo much!!!
I am afraid to put a rom on my 10.1, i love it though!
blacks10 said:
I am afraid to put a rom on my 10.1, i love it though!
Click to expand...
Click to collapse
There's nothing you should be afraid of there is a fix for everything, and if you can't find it? There are nice poeple out there who wants to solve your problrm on xda developers forum
@drefcom: you're welcome
Please help - When turning off the Screen Android 4.1.1 will not come back on
I have the following problem.
When I install one of the latest rom e.g.
[ROM] [JB] [P4--P4WIFI--P4VZW]
4.1.2 AOKP for the Galaxy Tab 10.1
or
[ROM][JB][CM10] Android 4.1.1 - CyanogenMod 10 Preview
then I have this problem:
When I turn off with the "Power"-Hardbutton, then it turns off, but it does not turn back on. The screen stays black.
With the Rom ...
[ROM][JB][CM10] Android 4.1.1 - CyanogenMod 10 Preview "cm-10-20120814-EXPERIMENTAL-p4.zip" from August everything works fine.
Since I had this flickering problem I flashed the bootloader before I installed all these Roms.
But one works and all new ones don't.
Anyone has a idea what to do?
thx
drefcom said:
Thanks for the reply DefQon, I agree I think this is most annoying errors I have ever gotten.
I also searched high and low and could only find the fix for HC.
I have tried this method and works perfectly!
Thank you sooo much!!!
Click to expand...
Click to collapse
:good:
Thanks this helped me fix a mates Galaxy Tab 10.1
I was starting to pull my hair out and this worked so well.
Takes no time to do and no need to reflash the rom.
Hi guys.
speersie said:
:good:
Thanks this helped me fix a mates Galaxy Tab 10.1
I was starting to pull my hair out and this worked so well.
Takes no time to do and no need to reflash the rom.
Click to expand...
Click to collapse
i tried this method, but at second flashing (bootloader.zip) i get "0 succeed/0 failed" and still i get that scramble, and have to reboot all the time.
Any ideas?
Thanks in advance.
Cheers!:good:
Problems solved
I solved my problems. I installed the "custom" bootloader for each Rom and the "black screen" problem is now gone.
Thanx anyway.
drefcom said:
Thanks for the reply DefQon, I agree I think this is most annoying errors I have ever gotten.
I also searched high and low and could only find the fix for HC.
I have tried this method and works perfectly!
Thank you sooo much!!!
Click to expand...
Click to collapse
I have tested the fix for weeks now and it worked great.
Except, this afternoon my tablet randomly restarted and now won't go past CM 10 boot screen.
Any idea whether reflashing the ROM without wyping, purely just installing (as is) CM10 M2 from CWM? Or any other ideas?
I have tried clearing the cache and the dalvik cache. I then tried doing a factory reset but it doesn't seem to proress. I thought if I can do a factory reset then reinstall the ROM I might get it to work but I can't install the ROM as it says "Error (Status 7)?
I have tried formatting the /data in attempt to get the factory reset to work but this also freezes.
Currently, my tablet is in an infinite loop cycle and I cannot change the ROM or do a factory reset.
Thanks, you guys have really been helpful!
drefcom said:
I have tested the fix for weeks now and it worked great.
Except, this afternoon my tablet randomly restarted and now won't go past CM 10 boot screen.
Any idea whether reflashing the ROM without wyping, purely just installing (as is) CM10 M2 from CWM? Or any other ideas?
I have tried clearing the cache and the dalvik cache. I then tried doing a factory reset but it doesn't seem to proress. I thought if I can do a factory reset then reinstall the ROM I might get it to work but I can't install the ROM as it says "Error (Status 7)?
I have tried formatting the /data in attempt to get the factory reset to work but this also freezes.
Currently, my tablet is in an infinite loop cycle and I cannot change the ROM or do a factory reset.
Thanks, you guys have really been helpful!
Click to expand...
Click to collapse
After hours of trying I have found a solution.
I previously had done backups. I tried each one until one started restoring. It completed quite a lot till it froze and I restarted into recovery.
I did a cache wipe and dalvik cache wipe and could then complete a factory reset.
It has now booted completely into ICS where I can now flash CM10 again.
The tablet works normally as you would expect on ICS. I booted into recovery and tried to flash CM10 M2 for the GT-P7500 but I still get a error, status 7.
Anyone experienced this?
drefcom said:
After hours of trying I have found a solution.
I previously had done backups. I tried each one until one started restoring. It completed quite a lot till it froze and I restarted into recovery.
I did a cache wipe and dalvik cache wipe and could then complete a factory reset.
It has now booted completely into ICS where I can now flash CM10 again.
The tablet works normally as you would expect on ICS. I booted into recovery and tried to flash CM10 M2 for the GT-P7500 but I still get a error, status 7.
Anyone experienced this?
Click to expand...
Click to collapse
Status 7 usually indicates the wrong update file, are you sure you are flashing the right ROM for the 7500?
Perhaps try to flash the recovery and bootloader first and then the right ROM and see what happens?
DefQoN_BE said:
Status 7 usually indicates the wrong update file, are you sure you are flashing the right ROM for the 7500?
Perhaps try to flash the recovery and bootloader first and then the right ROM and see what happens?
Click to expand...
Click to collapse
The thing is it is the exact same file I used to flash the previous time.. I first updated my recovery and bootloader before flashing and still get the error. Thanx for the thought though.
Hi, so today iv'e flashed my HD2 into NexusHD2, Instalation went fine nd complete till once rom starts up to begin installation of language nd ect.. a window pops in none stop saying.. Unfortunately, the process com.android.phone has stopped, so i'm really stuck in here and just wondering whats so wrong ive done, and any help would be appreciated. thank you.
Btw.., iv'e looked for similar posts but wasnt the same case, so here a new thread that goes in.
You problem lacks of information.
For example:
-Did You flash Nand or DataOnExt,
-And do You have TmoUS or EU htc?
Maybe You had too small cache/partition size.
Strange, i had similar trouble 2 days ago.
I had no troubles with rom, but My phone started to flash itself into lang welcome screen every morning and i had no internal storage after that.
I tried to re-create EXT partition on ClockWorkMod and reflashed dozen of times, but without progress.
Finally I deleted this rom, was one day with useless phone and flashed it again with full wipe/clean flash.
Now it seems to work like a charm, didnt flash for 2nd day so theres a hope for me )
!
Be sure if You set up good settings for cache and system partition as author said.
I rember, that once i flashed 4.2.2 rom with NAND option, although i have only 512mb of ram and NAND option is for HTC T-Mobile US version with 1Gb of ram, so after installation every 5sec i had same error, couldnt do sh1t.
Sorry if i speak wrong or it's nosense, cause it's just too late to think harder
Give me feedback and check every possibility as i mentioned!
Have a good week
Sent from my NexusHD2 using xda app-developers app
Hello guys.
I am in a bit of a situation.
I own a Samsung Galaxy S4 i9500.I rooted it 1 year ago and I have installed Omega rom.Whenever I try to install a new ROM i encounter a weird issue:i ALWAYS get stuck in the Samsung (welcome) screen. it seems I am "bound" to use omega rom.
The funny thing is that now i stuck at one single version of the omega rom , the V22.For instace , i tried to install omega rom v26 and i get the same issue: the samsung screen.
Please help me solve this problem. I want to install the OzcanRom .
I forgot to mention: when it gets stuck there , the phone heats up very high.
So far i tried to:
Flash 3 different kernels.
Flash CF autoroot.
Nothing worked.
Forgive my mistakes , english is not my main lang..
Best Possible wayout is
1 Flash Stock ROM
2 Go to recovery, factory Default it
3 boot it to homescreen
4 Root it
5 Enjoy New Custom Rom Installation (install ROM)
Give a try..
AlexGabriel said:
Hello guys.
I am in a bit of a situation.
I own a Samsung Galaxy S4 i9500.I rooted it 1 year ago and I have installed Omega rom.Whenever I try to install a new ROM i encounter a weird issue:i ALWAYS get stuck in the Samsung (welcome) screen. it seems I am "bound" to use omega rom.
The funny thing is that now i stuck at one single version of the omega rom , the V22.For instace , i tried to install omega rom v26 and i get the same issue: the samsung screen.
Please help me solve this problem. I want to install the OzcanRom .
I forgot to mention: when it gets stuck there , the phone heats up very high.
So far i tried to:
Flash 3 different kernels.
Flash CF autoroot.
Nothing worked.
Forgive my mistakes , english is not my main lang..
Click to expand...
Click to collapse
Hi mate ,
Do a full wipe and format internal SD ( philz touch mount and storage / format / data/ internal SD ....not sd1 that is your external one) back up first , also all the pictures music and what ever you have in your internal SD that you care for,,,place rom in the external SD
BTW do you have by any chance the chinese PIT ??
I did all those things over and over ,at least 5 or 6 times and same thing happens.
What is the chinese PIT?
AlexGabriel said:
I did all those things over and over ,at least 5 or 6 times and same thing happens.
What is the chinese PIT?
Click to expand...
Click to collapse
Hi ,
The chinese PIT is a modification to increase the size of the internal SD
What recovery are you using?
I am using the Team Win recovery Project v2.7
my system takes 7.21 gb out of the 16 gb.
I don`t think i am usit the PIT because i have never heard of it
AlexGabriel said:
I am using the Team Win recovery Project v2.7
my system takes 7.21 gb out of the 16 gb.
I don`t think i am usit the PIT because i have never heard of it
Click to expand...
Click to collapse
No you have the regular PIT
your TWRP recovery is old upgrade it and try again
I will be back in an hour with an edit about this.
Even with the last TWRP i get the same result...
Could you tell me at least why i can only install omega v22 and not v26?
AlexGabriel said:
Could you tell me at least why i can only install omega v22 and not v26?
Click to expand...
Click to collapse
what error you get while installing new ROM
The install goes well , no errors show up. I finish the install , reboot the phone and then it stays forever in the "SAMSUNG" screen.In addition to that , the phone heats up like crazy.
And the funny part is that i can only install omega v22 , if i try to install omega v26 ,it has the same issue.
AlexGabriel said:
The install goes well , no errors show up. I finish the install , reboot the phone and then it stays forever in the "SAMSUNG" screen.In addition to that , the phone heats up like crazy.
And the funny part is that i can only install omega v22 , if i try to install omega v26 ,it has the same issue.
Click to expand...
Click to collapse
Hi did you updated the recovery?
The only reason i can think of is the recovery , if not try what is suggested in post 2
I will do as it was said in the post #2.Could you give me a little more information about each step?
Thank you !
AlexGabriel said:
I will do as it was said in the post #2.Could you give me a little more information about each step?
Thank you !
Click to expand...
Click to collapse
Here is a great guide
http://forum.xda-developers.com/showthread.php?t=2265477
You can download firmwares also from SamMobile.com
Try to reflash the Rom second time.
So:
Format
Flash
Reboot to recovery
Flash again the same Rom same options.
Had a similar sounding problem