Hi,
I came here looking for some help.
I've been tring for several hours to install the ubuntu 13.04 desktop on my Nexus 7 flo KTU84P(Wifi 2013) version.
I tried to install using fastboot (won't boot at all) and multirom (can't install). Does anyone has the preinstalled image
that actually works on the flo version of Nexus 7?
I couldn't install the grouper version on my flo device by my lack of expertise, so if there is anyone who can help me
with that, it would probably do the trick.
Thank you in advance,
Regards,
Jonathan.
There is no version of Ubuntu for the Nexus 7 2013 and you've posted it in the wrong forum. This is the Nexus 7 2012 forum.
Hello Everyone,
Last week I bought all of the necessary parts to do an in-dash install of a Nexus 7 (2012). This morning, before work, I started the process of unlocking the bootloader and rooting, etc. Well on my lunch break I went over to Timur's site to download his ROM to my phone so that I would have it already downloaded before i got home. However, I see that he has discontinued distribution of that ROM. After scouring the interwebs, I found a link he posted on another site with a statement from his saying that it will only be available until 10/19. However, when I try the link it won't load.
So, I am wondering if there are any alternative ROMs that can do all of the same things as Timur's.
Any help is greatly appreciated.
Thanks.
Use Autodroid
for grouper
http://forum.xda-developers.com/showthread.php?t=2789993
for tilapia
http://forum.xda-developers.com/showthread.php?t=2826317
X2 for autodroid, pretty much all thats available now.
nexus7_cm-10.1-20130817-USBROM-grouper.zip
Zippyshare.com - Free File Hosting
www4.zippyshare.com
timur-kernel-n7-2013-v4.0-final-flo-deb.zip
Zippyshare.com - Free File Hosting
www120.zippyshare.com
Q&A for [USB OTG] [11DEC13] [PATCH] Externally Powered USB OTG
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [USB OTG] [11DEC13] [PATCH] Externally Powered USB OTG. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Paranoid Android 4.4
Hello!
first of all, thanks for your work. :good:
I would like to try the patch but I don't know which version to choose: I have a Paranoid Android 4.4
Could you help me?
Wifi Crash, Media Crash, Settings "Storage" Crash
Hey guys, I'm on PA 4.6 BETA5, when I flash the aosp or franko kernel (after going back to stock kernel before flashing the new one) my Wifi won't enable, android.something.media crashes and in the settings app, when I tap storage the app crashes...any way to solve this problem or an alternative? Thanks!
PS: I'm really sorry if this was asked before, I read the hole last 10 sites of the forum and didnt found anythings related to my problem, "just" 10 sites because I think its related to 4.4.4 and maybe PA.
Which OTG mod to download for stock 4.4.4?
Which OTG mod to download for stock 4.4.4? There are so many I can not figure out what is the correct one to use.
OTG Android Lollipop
Anything to Android 5.0? I have looking and I think that it isn't incorporate in the stock kernel
thanks
piedra96 said:
Anything to Android 5.0? I have looking and I think that it isn't incorporate in the stock kernel
thanks
---------- Post added at 11:38 AM ---------- Previous post was at 11:34 AM ----------
I have looking and I think that it isn't incorporate in the stock kernel. So, anything to Android 5.0?
thanks
Click to expand...
Click to collapse
There are custom kernels (unleased kernel series, Hells Doctor, Hellscore, ...) which supports OTG and also supports Lolipop.
Stock Lollipop
A zip file where i can make a modification to my stock kernel on the N4! I want to use the stock for a few days to test it!
pm_dsp_ra said:
There are custom kernels (unleased kernel series, Hells Doctor, Hellscore, ...) which supports OTG and also supports Lolipop.
Click to expand...
Click to collapse
mm okey! so, have you test Hells Doctor on Lollipop? I will try out it this afternoon. I'm running a 4.3 stock perfectly with the otg, but Lollipop look like so excited.
Lollipop
Is there a patch for android lollipop for OTG support? I have franco.Kernel installed.
Lollipop
Is there a patch for Lollipop? Or does the kitkat patch work on lollipop?
dangerelvis said:
Is there a patch for Lollipop? Or does the kitkat patch work on lollipop?
Click to expand...
Click to collapse
I have no idea! I have tested Hells Doctor and Hell Core kernels on my Nexus 4 running Stock Lollipop and anyone work. :crying: :crying:
Anyone tried this patch on stock Lollipop kernel? Does it work?
How does one "Simply install the zip in recovery"?
My screen is broken (just the touch; everything is still visible). I was hoping I could install this mod without being able to touch the lower half of my screen so that I could plug in a mouse so that I could copy some files off my device.
I can reboot into recovery mode, but USB debugging is *not* enabled. I've never used "adb" on this device before (I just says "offline" when I try to run it from my PC).
I have no idea how to "install a zip".
Phone is an Nexus 4, running android 4.something.
OTG on Paranoid 4.6 beta 6
Hello,
When I flash the kernel (R199) and the system load I can't turn on the wifi and every time I enter the storege settings they crash.
also tried the other versions of the kernel, no help.
please help.
Thanks,
Is the OP willing to develop the patch for lollipop too? Or is there any nice kernel with USB host support?
nexus 4 lolipop 5.0.1 and xbox wireless gamepad
Hello. I want use xbox360 wireless gamepad on my nexus 4 lolipop 5.0.1. I think first I need kernel with OTG support. What kernel I can download on 5.0.1 android? I need y-cable for receiver of xbox360. what about mouses and keyboards they also need y-cable?
What can be the problem, why OTG still doesn't work
Hey guys,
however I'm completely new to this stuff, I managed to get through every barriers, and I put Cyanogenmod 11 snapshot M12 on my Nexus 4 and after that flashed the suggested kernel and patch successfully to try out OTG. The phone works withput problem, the installations seem to be successful, therefore I tried to connect an external storage to the phone to check if OTG works on it.
For that, I used a SIMPLE OTG cable like this:
<<<LINK CANNOT BE SHOWN SINCE I AM NEW TO THE FORUM - picture is the second picture of the first post in this thread>>>
connected to an Y-cable SIMILAR to this:
<<<NO LINK AGAIN - the 3rd picture of the first post in this thread>>>
The difference from the one on the picture is that mine has a male mini USB end instead of a female normal USB end as in the picture. My cable is the cable of an external wichester otherwise.
So, I tried with this cable setup, the result was that both the phone and the connected storage received electricity from the external power source, but the storage was not detected by the phone. I had a feeling that it doesn't get enogh power, so I attached it to a USB phone charger just to be sure, but the situation remained the same: the light on the storage was green, which means it is charging, the light on the phone was also on, but the storage was not detected.
My question is if I should try with the exact same cable set that can be found in the first post of this thread on the first picture or mine also should do the job, and there should be still some software related problem?
Please also tell me if you need more information on this to answer it, however I tried to be specific.
Thank you for your help in advance.
Hello. What i can do on lolipop? There is no solution? I have a 32gb flash drive, y-otg cable, standart power adapter micro-usb-male. Rooted nexus4
Which zip I need to download?
Hi, i'm really beggining on Android stuffs, since I didnt had one until the last week, so I'm really in doubt about which one of the zip files i need to install in my system to make the OTG cable work properly.
Once I downloaded a random ziddley zip on the internet and when I installed it in recovery mode, i needed to reinstall the android system on my phone, since the phone wont boot anymore.
So, can anyone help me? I'm sharing in this post a screenshot of the Android Version screen on the settings. I've rooted my phone using the King Root app
Considering that my android version is 4.4.4, I consider that I may download one of the following:
4.4.x: 2013.12.11 1604ET: [fk r199] [fk r199-CM]
4.4.x: 2013.12.06 1445ET: [aosp r7]
But which one?
And just another noob question. Is this the right way to install the ziddley zip on my phone?
(www).addictivetips.com/mobile/how-to-install-a-rom-or-app-from-zip-file-to-android-device-from-recovery/
Sorry for the noob questions and thanks to anyone who helps, because I REALLY need the otg cable to work, so I can develop some things using the XBOX 360 cable!
Removed
I have a Nexus 2012 (Grouper) with Timur's USB ROM / Cyanogenmod 10.1 on there (my brother installed this - it's installed in the car).
I would like to upgrade to a newer ROM (Cyanogen 12?) but unsure of compatibility - every website I've read seems to be information overload (I'm new to android world).
I've been told I need a ROM that supports a Y-split OTG cable which runs into a powered USB hub.
The reason I'm wanting to upgrade is for BLE compatibility as I believe from what I've read, that this is possible on the Grouper with more recent versions of Cyanogenmod
alexmallaburn said:
I have a Nexus 2012 (Grouper) with Timur's USB ROM / Cyanogenmod 10.1 on there (my brother installed this - it's installed in the car).
I would like to upgrade to a newer ROM (Cyanogen 12?) but unsure of compatibility - every website I've read seems to be information overload (I'm new to android world).
I've been told I need a ROM that supports a Y-split OTG cable which runs into a powered USB hub.
The reason I'm wanting to upgrade is for BLE compatibility as I believe from what I've read, that this is possible on the Grouper with more recent versions of Cyanogenmod
Click to expand...
Click to collapse
I don't utilize OTG on my Nexus 7 at all so I don't have an answer for you. What I can tell you is that you should probably try what I did, flash them all. Also I don't recommend any rom above android 4.4.x due to the very "slow" nature of the Nexus 7
What’s is the newest one that is under 4.4?
Hello i have rooted my nexus 7 2012 modell
and flashed this rom: (android 7.1.2) lineage
[ROM][7.1.2][UNOFFICIAL][grouper] CM14.1 for Nexus 7 2012
*** Disclamer By downloading and installing this ROM you agree that you do so at your own risk, and that you understand that it probably voids your warranty. (But does anyone still have an active warranty on this 2012 device?) Introduction...
forum.xda-developers.com
when i try to open bcmon app then it shows me a blank white page/nothing
on my phone with it opens normal (cyanogen android 6)
which rom should i use for bcmon on nexus 7 2012 , cant find the rom Cyanogen 9 for nexus 7 because on bcon website stand it is supported
want to use termux to install wifite and use with bcmon the monitor mode , because i know that kali chroot not support bcmon
greetings
solved use cm 10.1