More recent ROM similar to Timur's USB ? - Nexus 7 Q&A, Help & Troubleshooting

I have a Nexus 2012 (Grouper) with Timur's USB ROM / Cyanogenmod 10.1 on there (my brother installed this - it's installed in the car).
I would like to upgrade to a newer ROM (Cyanogen 12?) but unsure of compatibility - every website I've read seems to be information overload (I'm new to android world).
I've been told I need a ROM that supports a Y-split OTG cable which runs into a powered USB hub.
The reason I'm wanting to upgrade is for BLE compatibility as I believe from what I've read, that this is possible on the Grouper with more recent versions of Cyanogenmod

alexmallaburn said:
I have a Nexus 2012 (Grouper) with Timur's USB ROM / Cyanogenmod 10.1 on there (my brother installed this - it's installed in the car).
I would like to upgrade to a newer ROM (Cyanogen 12?) but unsure of compatibility - every website I've read seems to be information overload (I'm new to android world).
I've been told I need a ROM that supports a Y-split OTG cable which runs into a powered USB hub.
The reason I'm wanting to upgrade is for BLE compatibility as I believe from what I've read, that this is possible on the Grouper with more recent versions of Cyanogenmod
Click to expand...
Click to collapse
I don't utilize OTG on my Nexus 7 at all so I don't have an answer for you. What I can tell you is that you should probably try what I did, flash them all. Also I don't recommend any rom above android 4.4.x due to the very "slow" nature of the Nexus 7

What’s is the newest one that is under 4.4?

Related

[Q] Accessory mode possible?

I would like to use USB accessory mode on my GT540 - I have an Android Open Accessory Development kit that I want to connect to the phone. I have installed the latest Swiftdroid RC4 which has Android 2.3.5 (2.3.4 is needed for accessory mode), but my phone cannot see the device. I am not sure if the problem is the phone in general, or whether the kernel version is too old. Would a newer kernel (if one is eventually ported to this phone ) solve the problem?
Are you trying via PC suit? Some roms are not compatible with it
Sent from my GT540 using XDA App
I am not trying to connect the phone to the computer, rather I want to connect the phone to other USB devices, using the new Android Open Accessory standard (new user so I can't post a link to it). The web pages say you need 2.3.4, but I cannot get it to work with the latest SwiftDroid which has 2.3.5. I think the problem may be the kernel version but I am not sure.

[Q] Nexus 7 Kernel developing

I am new to XDA, new to the Nexus 7, and new to android on retail devices.
BUT I am a linux kernel developer - with a driver in the distribution kernel, and I have done android ports for development platforms.
So I am stupid on somethings and very sharp on others.
I need to do my own drivers for some devices for a Nexus 7.
Clearly others have been able to build kernels etc. for the Nexus 7 so that must be possible.
I am looking for pointers, howtos, ...
I already know how to write drivers, compile kernels - even for android.
I need to know where to get the config information for the Nexus 7, or a source tree specific to the Nexus 7,
as well as how to get a new kernel onto a retail device. I am used to putting android onto SD card and booting it on and unlocked device

[Q] ROM from Nexus 7 WiFi 2012 on other device?

The problem relates to another device, but is associated with the Nexus 7 2012 - that's why I would like to ask this question here. Of course I was looking at other forums, but found nothing.
Nexus 7 WiFi (version 2012) has a very similar hardware configuration to the Galaxy Galapad G1 (http://en.galapad.net/product.html) or Nabi 2. Both devices (G1 & N7) have a Tegra 3, 1GB of RAM, WiFi, Bluetooth, 8 or 16GB FLASH, GPS... They differ in screen resolution and probably something else. My Galapad has unlocked bootloader, kernel version is 3.1.10, I have access to fastboot, but can't install any TWRP or CWM.
I wonder if it is possible to use ROM from Nexus on Galapad G1? The latest version of Android for Galapad is old 4.1, the Nexus has version 4.3... So is it possible to port (or just install) this version to G1?
Thanks for any help and sorry for this thread.

[Q&A] [USB OTG] [11DEC13] [PATCH] Externally Powered USB OTG

Q&A for [USB OTG] [11DEC13] [PATCH] Externally Powered USB OTG
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [USB OTG] [11DEC13] [PATCH] Externally Powered USB OTG. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Paranoid Android 4.4
Hello!
first of all, thanks for your work. :good:
I would like to try the patch but I don't know which version to choose: I have a Paranoid Android 4.4
Could you help me?
Wifi Crash, Media Crash, Settings "Storage" Crash
Hey guys, I'm on PA 4.6 BETA5, when I flash the aosp or franko kernel (after going back to stock kernel before flashing the new one) my Wifi won't enable, android.something.media crashes and in the settings app, when I tap storage the app crashes...any way to solve this problem or an alternative? Thanks!
PS: I'm really sorry if this was asked before, I read the hole last 10 sites of the forum and didnt found anythings related to my problem, "just" 10 sites because I think its related to 4.4.4 and maybe PA.
Which OTG mod to download for stock 4.4.4?
Which OTG mod to download for stock 4.4.4? There are so many I can not figure out what is the correct one to use.
OTG Android Lollipop
Anything to Android 5.0? I have looking and I think that it isn't incorporate in the stock kernel
thanks
piedra96 said:
Anything to Android 5.0? I have looking and I think that it isn't incorporate in the stock kernel
thanks
---------- Post added at 11:38 AM ---------- Previous post was at 11:34 AM ----------
I have looking and I think that it isn't incorporate in the stock kernel. So, anything to Android 5.0?
thanks
Click to expand...
Click to collapse
There are custom kernels (unleased kernel series, Hells Doctor, Hellscore, ...) which supports OTG and also supports Lolipop.
Stock Lollipop
A zip file where i can make a modification to my stock kernel on the N4! I want to use the stock for a few days to test it!
pm_dsp_ra said:
There are custom kernels (unleased kernel series, Hells Doctor, Hellscore, ...) which supports OTG and also supports Lolipop.
Click to expand...
Click to collapse
mm okey! so, have you test Hells Doctor on Lollipop? I will try out it this afternoon. I'm running a 4.3 stock perfectly with the otg, but Lollipop look like so excited.
Lollipop
Is there a patch for android lollipop for OTG support? I have franco.Kernel installed.
Lollipop
Is there a patch for Lollipop? Or does the kitkat patch work on lollipop?
dangerelvis said:
Is there a patch for Lollipop? Or does the kitkat patch work on lollipop?
Click to expand...
Click to collapse
I have no idea! I have tested Hells Doctor and Hell Core kernels on my Nexus 4 running Stock Lollipop and anyone work. :crying: :crying:
Anyone tried this patch on stock Lollipop kernel? Does it work?
How does one "Simply install the zip in recovery"?
My screen is broken (just the touch; everything is still visible). I was hoping I could install this mod without being able to touch the lower half of my screen so that I could plug in a mouse so that I could copy some files off my device.
I can reboot into recovery mode, but USB debugging is *not* enabled. I've never used "adb" on this device before (I just says "offline" when I try to run it from my PC).
I have no idea how to "install a zip".
Phone is an Nexus 4, running android 4.something.
OTG on Paranoid 4.6 beta 6
Hello,
When I flash the kernel (R199) and the system load I can't turn on the wifi and every time I enter the storege settings they crash.
also tried the other versions of the kernel, no help.
please help.
Thanks,
Is the OP willing to develop the patch for lollipop too? Or is there any nice kernel with USB host support?
nexus 4 lolipop 5.0.1 and xbox wireless gamepad
Hello. I want use xbox360 wireless gamepad on my nexus 4 lolipop 5.0.1. I think first I need kernel with OTG support. What kernel I can download on 5.0.1 android? I need y-cable for receiver of xbox360. what about mouses and keyboards they also need y-cable?
What can be the problem, why OTG still doesn't work
Hey guys,
however I'm completely new to this stuff, I managed to get through every barriers, and I put Cyanogenmod 11 snapshot M12 on my Nexus 4 and after that flashed the suggested kernel and patch successfully to try out OTG. The phone works withput problem, the installations seem to be successful, therefore I tried to connect an external storage to the phone to check if OTG works on it.
For that, I used a SIMPLE OTG cable like this:
<<<LINK CANNOT BE SHOWN SINCE I AM NEW TO THE FORUM - picture is the second picture of the first post in this thread>>>
connected to an Y-cable SIMILAR to this:
<<<NO LINK AGAIN - the 3rd picture of the first post in this thread>>>
The difference from the one on the picture is that mine has a male mini USB end instead of a female normal USB end as in the picture. My cable is the cable of an external wichester otherwise.
So, I tried with this cable setup, the result was that both the phone and the connected storage received electricity from the external power source, but the storage was not detected by the phone. I had a feeling that it doesn't get enogh power, so I attached it to a USB phone charger just to be sure, but the situation remained the same: the light on the storage was green, which means it is charging, the light on the phone was also on, but the storage was not detected.
My question is if I should try with the exact same cable set that can be found in the first post of this thread on the first picture or mine also should do the job, and there should be still some software related problem?
Please also tell me if you need more information on this to answer it, however I tried to be specific.
Thank you for your help in advance.
Hello. What i can do on lolipop? There is no solution? I have a 32gb flash drive, y-otg cable, standart power adapter micro-usb-male. Rooted nexus4
Which zip I need to download?
Hi, i'm really beggining on Android stuffs, since I didnt had one until the last week, so I'm really in doubt about which one of the zip files i need to install in my system to make the OTG cable work properly.
Once I downloaded a random ziddley zip on the internet and when I installed it in recovery mode, i needed to reinstall the android system on my phone, since the phone wont boot anymore.
So, can anyone help me? I'm sharing in this post a screenshot of the Android Version screen on the settings. I've rooted my phone using the King Root app
Considering that my android version is 4.4.4, I consider that I may download one of the following:
4.4.x: 2013.12.11 1604ET: [fk r199] [fk r199-CM]
4.4.x: 2013.12.06 1445ET: [aosp r7]
But which one?
And just another noob question. Is this the right way to install the ziddley zip on my phone?
(www).addictivetips.com/mobile/how-to-install-a-rom-or-app-from-zip-file-to-android-device-from-recovery/
Sorry for the noob questions and thanks to anyone who helps, because I REALLY need the otg cable to work, so I can develop some things using the XBOX 360 cable!
Removed

RD9700 drivers for Nexus Player

Hey everyone!
I'm running the Nexus Player with the 3.10.20-g43ab991 kernel and Android 7.1.1. I've bought a Micro USB to LAN adapter and it has the RD9700 chipset which is sadly not supported by default. However, I've found this post and they made a driver - unfortunately, for a very old kernel version.
Has someone this driver for newer kernels or could compile it for new kernels (unfortunately, I'm a total noob at this)?
Thanks!
I have no experience with that particular product but I can tell you that the TP-Link UE330 works with an OTG adapter cable.

Categories

Resources