Hello all. I just purchased a Note 3 that was originally an AT&T Note 3, but has been unlocked. So I am going to be using it for T-Mobile.
I'm going to be rooting it, so do I use T-Mobile ROMs after its rooted? And is there a certain method I need to use to root? Or is that universal? I've rooted phones in the past, but never an unlocked device, so I dont know what's different, if anything at all. Thanks for any help you can give.
You have to flash the ROM you want, and root after that.
If you root before installing ROM, the rooting will be override.
vndnguyen said:
You have to flash the ROM you want, and root after that.
If you root before installing ROM, the rooting will be override.
Click to expand...
Click to collapse
Flash a ROM, and than root? Never had to do that before. Im used to rooting, than flashing lol
Syst3m Deadlock said:
Flash a ROM, and than root? Never had to do that before. Im used to rooting, than flashing lol
Click to expand...
Click to collapse
Yes. The correct sequence should be: install custom recovery, install rom, root.
Some rom comes with pre-rooting so you may not need to root.
Because rooting is in the system partition. And when you install a rom, it will be install to the system partition too. So if you have root, new rom will override your rooting.
vndnguyen said:
Yes. The correct sequence should be: install custom recovery, install rom, root.
Some rom comes with pre-rooting so you may not need to root.
Because rooting is in the system partition. And when you install a rom, it will be install to the system partition too. So if you have root, new rom will override your rooting.
Click to expand...
Click to collapse
Thank you, didnt know all that.
But since it is an unlocked AT&T device that will be running on T-Mobile, do I install AT&T or T-Mobile ROMs? Sorry if this sounds dumb, I've just never dealt with an unlocked device before.
Related
i think i just installed a rom without rooting it,is that possible or im wrong?coz i when overclock it,it will automatic restart,and i cant complete( cd /data/app-private ) in emulator..and i think i havent backup the origanal android..so if i wan to flash back to stock is that possible..
justandroiduser said:
i think i just installed a rom without rooting it,is that possible or im wrong?coz i when overclock it,it will automatic restart,and i cant complete( cd /data/app-private ) in emulator..and i think i havent backup the origanal android..so if i wan to flash back to stock is that possible..
Click to expand...
Click to collapse
You can't install a custom rom without root. You need busybox, SU and the root exploit to allow you to flash a custom rom. The reason the overclocking app doesn't work is because you don't have super user permission (part of rooting) and the stock kernel isn't scalable if I remember right. Point is no root no rom lol.
Sent from my Incredible using Tapatalk
sunder74 said:
Point is no root no rom lol.
Click to expand...
Click to collapse
Are you kidding us?
justandroiduser said:
when overclock it
Click to expand...
Click to collapse
you MUST have root access to overclock Milestone
All wrong!
You can install ROM whitout being root. All you need is just flash the Vulnerable Recovery.
Once you have it, you are ready to execute the OR update.zip and boom.
From there you can root it or not.
wisefreakz said:
All wrong!
You can install ROM whitout being root. All you need is just flash the Vulnerable Recovery.
Once you have it, you are ready to execute the OR update.zip and boom.
From there you can root it or not.
Click to expand...
Click to collapse
absolutely correct..rooting the device is independent of updating the Rom..
I do keeping on changing roms without root.
wisefreakz said:
All wrong!
You can install ROM whitout being root. All you need is just flash the Vulnerable Recovery.
Once you have it, you are ready to execute the OR update.zip and boom.
From there you can root it or not.
Click to expand...
Click to collapse
That's what the op was asking (reference to scaling/overclocking)...you can't install a "custom" rom with a custom kernel, radio etc without root priveledges. Basic consumer handsets do not allow writing to the system partition(Hence the need for root. With the exception of ota updates or manual updates from the provider/manufacturer.)
Sent from my Droid using Tapatalk
sunder74 said:
That's what the op was asking (reference to scaling/overclocking)...you can't install a "custom" rom with a custom kernel, radio etc without root priveledges. Basic consumer handsets do not allow writing to the system partition(Hence the need for root. With the exception of ota updates or manual updates from the provider/manufacturer.)
Sent from my Droid using Tapatalk
Click to expand...
Click to collapse
Right on that my friend!!
I have a galaxy s5 canadian version i already rooted it but seem like there is new knox thing on these phones. basically i want to flash the xtrolite rom im already rooted what other steps do i need to do to get the rom on my phone? ie unlocking a bootloader? or is it unlocked already? do i need to flash a recovery? since alot of people are talking about xposed framework and i read somewhere tht you dont need recovery if you have xposed which i dont know what it is. can someone please help me? Thanks
sofia-captivate said:
I have a galaxy s5 canadian version i already rooted it but seem like there is new knox thing on these phones. basically i want to flash the xtrolite rom im already rooted what other steps do i need to do to get the rom on my phone? ie unlocking a bootloader? or is it unlocked already? do i need to flash a recovery? since alot of people are talking about xposed framework and i read somewhere tht you dont need recovery if you have xposed which i dont know what it is. can someone please help me? Thanks
Click to expand...
Click to collapse
You should first of all install this recovery: "philz touch recovery" Look for threads on this forum and youtube videos how to do it, follow this exactly and properly because this part you don't want to mess up.
When done with that you want to take a backup with "philz touch recovery" there is also guides and videos on how to do that.
Both this things are pretty easy but just be carefull you do them right.
When that is done you will install your ROM, that is very easy. Download ROM to your SD card and use an app like "ROM customizer" to install the ROM. There might be different installs for different ROMS' all ROMs have their own guides, but most of them are pretty much the same.
Just read and you will know everything about how to do this very soon.
kgyirhj said:
You should first of all install this recovery: "philz touch recovery" Look for threads on this forum and youtube videos how to do it, follow this exactly and properly because this part you don't want to mess up.
When done with that you want to take a backup with "philz touch recovery" there is also guides and videos on how to do that.
Both this things are pretty easy but just be carefull you do them right.
When that is done you will install your ROM, that is very easy. Download ROM to your SD card and use an app like "ROM customizer" to install the ROM. There might be different installs for different ROMS' all ROMs have their own guides, but most of them are pretty much the same.
Just read and you will know everything about how to do this very soon.
Click to expand...
Click to collapse
do i need to unlock bootloader or do something to knox or disable knox? im not sure cause only thing i have done to this device is root only. i know how to flash this recovery i think also know how to backup. im just scared as i have the canadian version if there is any other steps to take?
sofia-captivate said:
do i need to unlock bootloader or do something to knox or disable knox? im not sure cause only thing i have done to this device is root only. i know how to flash this recovery i think also know how to backup. im just scared as i have the canadian version if there is any other steps to take?
Click to expand...
Click to collapse
I don't think there is much to worry about.
The ROM you want to install supports your version. The recovery should do too.
Just make sure you do everything right when installing the recovery and you should be fine.
Any mistake after that can be repaired with your recovery.
Root is all you need. You should not need to unlock anything else. And don't worry about KNOX.
If your bootloader is locked, then I don't know how to solve it. But I don't think it's locked, only a few service providers in the world lock the bootloaders.
If it is I'm very sorry!
kgyirhj said:
I don't think there is much to worry about.
The ROM you want to install supports your version. The recovery should do too.
Just make sure you do everything right when installing the recovery and you should be fine.
Any mistake after that can be repaired with your recovery.
Root is all you need. You should not need to unlock anything else. And don't worry about KNOX.
If your bootloader is locked, then I don't know how to solve it. But I don't think it's locked, only a few service providers in the world lock the bootloaders.
If it is I'm very sorry!
Click to expand...
Click to collapse
how to know if my bootloader is locked or unlocked? Thanks once i know this im ready to go and flash everything. Thank you somuch
sofia-captivate said:
how to know if my bootloader is locked or unlocked? Thanks once i know this im ready to go and flash everything. Thank you somuch
Click to expand...
Click to collapse
I don't know how to see that beforhand. Just try to do the flash and you should see if it works or not.
If it's fail because it's locked you will notice and then nothing will be broken.
If it's not locked you will have a successful flash, which you will see.
I have read about other Canadians installing ROMS and flashing Recovery so I think you will have success!
sofia-captivate said:
how to know if my bootloader is locked or unlocked? Thanks once i know this im ready to go and flash everything. Thank you somuch
Click to expand...
Click to collapse
The Canadian W8 ROM does not have a locked bootloader. It can be rooted, custom recovery can be installed and if you want, ROMs installed.
With Xposed Framework you don't really need custom ROM. Beauty of root is that you can use titanium backup to freeze dozens of bloatware apps from samsung and others, run Xposed, run other apps that need root, fix the stupid kitkat permissions on SD card, backup your ROM etc.
Once rooted you can also use a third party kernel that supports under or over clocking, depending on your need. Custom kernel developers work hard to get you better battery life.
One thing other poster didn't mention is that when you install custom recovery it will trip Knox. Please don't ask what that is. Look it up and decide. Your warranty will be void.
harry_fine said:
The Canadian W8 ROM does not have a locked bootloader. It can be rooted, custom recovery can be installed and if you want, ROMs installed.
With Xposed Framework you don't really need custom ROM. Beauty of root is that you can use titanium backup to freeze dozens of bloatware apps from samsung and others, run Xposed, run other apps that need root, fix the stupid kitkat permissions on SD card, backup your ROM etc.
Once rooted you can also use a third party kernel that supports under or over clocking, depending on your need. Custom kernel developers work hard to get you better battery life.
One thing other poster didn't mention is that when you install custom recovery it will trip Knox. Please don't ask what that is. Look it up and decide. Your warranty will be void.
Click to expand...
Click to collapse
Exactly what I'm doing
Sent from my SM-G900F using Tapatalk
Brava27 said:
Exactly what I'm doing
Sent from my SM-G900F using Tapatalk
Click to expand...
Click to collapse
Has anyone been able to get Viper4Android working on 6.0.1?
I have root, busy box, and SU installed and working but Viper refuses to install the driver. Can someone please help?
I have the G900-W8 with Rogers.
The title is basically my question, but to elaborate: Do I need to do an initial process before flashing a custom ROM or does flashing a custom ROM form part of rooting?
you need root to flash a custom rom.
you can say root is only a doorway to customization.
khantastic said:
you need root to flash a custom rom.
you can say root is only a doorway to customization.
Click to expand...
Click to collapse
Incorrect. You don't need root to flash a custom rom.
You need a custom recovery to flash rom. You don't need root for that.
Lennyz1988 said:
Incorrect. You don't need root to flash a custom rom.
You need a custom recovery to flash rom. You don't need root for that.
Click to expand...
Click to collapse
But is it possible to flash a custom recovery without root?
LironImaN said:
But is it possible to flash a custom recovery without root?
Click to expand...
Click to collapse
Yes it is, but you will lose your warranty anyway, it's not important if you got root or not
Hello,
i have samsung galaxy s4 i9500 and i want to root it so i can customized my rom but king root, supersu or any root apps is not working. what should i do? should i downgrade it so i can flash it in any rom. any help? Thanks!
You have to use the right method.
Root file
Instructions
Good luck.
GDReaper said:
You have to use the right method.
Root file
Instructions
Good luck.
Click to expand...
Click to collapse
I already do that in my first root but its give me a crashing rom. all apps are saying force stop, so im not able to use my phone that time. is there any method?
you could try wiping cache and dalvik
3mel said:
you could try wiping cache and dalvik
Click to expand...
Click to collapse
i already do that but nothings happen. i really want to flash custom rom in my s4 but i dont know what should i do. i dont want lollipop version but it keep updating the rom. Badly want it.
Brentyuan said:
i already do that but nothings happen. i really want to flash custom rom in my s4 but i dont know what should i do. i dont want lollipop version but it keep updating the rom. Badly want it.
Click to expand...
Click to collapse
You don't need root to flash a custom ROM.
You just need a custom recovery. TWRP is recommended.
GDReaper said:
You don't need root to flash a custom ROM.
You just need a custom recovery. TWRP is recommended.
Click to expand...
Click to collapse
But it says needs root. Any twrp that doesnt required a roots?
Brentyuan said:
But it says needs root. Any twrp that doesnt required a roots?
Click to expand...
Click to collapse
You don't need root. TWRP can be flashed with Odin and this doesn't require root.
Rooting and flashing a custom ROM are different and separate things.
Hello. I'm new to Android and all of this rooting and stuff but I want to try out flashing a custom ROM but I don't know how. Do you need to be rooted? I know about custom recoveries and stuff but I need to know exactly how.
EDIT: My model number is WAS-LO3T
My build number is WAS-LO3TC654B198
EDIT 2: I watched the One Click Root video. Is it safe? Is kingroot safe?
ANYONE? pls
ianorna said:
ANYONE? pls
Click to expand...
Click to collapse
For rooting phone need unlock bootloader and flash TWRP. Then yet flash root.
And forgot about king root. Only SU.
rambik33 said:
For rooting phone need unlock bootloader and flash TWRP. Then yet flash root.
And forgot about king root. Only SU.
Click to expand...
Click to collapse
How do I unlocked my bootloadrr
ianorna said:
How do I unlocked my bootloadrr
Click to expand...
Click to collapse
How to root link below (includes unlocking the bootloader). Follow the steps very carefully as this is your first time rooting. I am not to blame nor anyone here on xda if you end up with a bricked phone. If you use android pay this will no longer work, some bank apps will not work either FYI due to root.
At present there is only one custom rom available however this is not specifically made for our device but for the p8 lite. When I flashed it about a month ago there are some bugs still like camera not working. Hopefully some talented people will buy our device and develope a custom rom for us.
https://www.google.co.uk/amp/s/foru...ow-to/twrp-how-to-root-p10-lite-t3617418/amp/